[ubuntu-tr] ubuntu ve casper mini
Muhammed BÜYÜKKURT
selcuklubiyolog at gmail.com
25 Tem 2010 Paz 15:48:20 BST
mavera at caspermini:~$ lspci
00:00.0 Host bridge: Intel Corporation Pineview DMI Bridge
00:02.0 VGA compatible controller: Intel Corporation Pineview
Integrated Graphics Controller
00:02.1 Display controller: Intel Corporation Pineview Integrated
Graphics Controller
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 2 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2
EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation Tigerpoint LPC Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801GR/GH (ICH7 Family)
SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 Ethernet controller: Attansic Technology Corp. Atheros AR8132
/ L1c Gigabit Ethernet Adapter (rev c0)
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10)
mavera at caspermini:~$
mavera at caspermini:~$ dmesg
[ 0.221920] pci 0000:02:00.0: reg 14 32bit mmio: [0x92000000-0x92003fff]
[ 0.222005] pci 0000:02:00.0: supports D1 D2
[ 0.222010] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.222019] pci 0000:02:00.0: PME# disabled
[ 0.222109] pci 0000:00:1c.1: bridge io port: [0x1000-0x1fff]
[ 0.222118] pci 0000:00:1c.1: bridge 32bit mmio: [0x92000000-0x92ffffff]
[ 0.222130] pci 0000:00:1c.1: bridge 64bit mmio pref: [0x91000000-0x91ffffff]
[ 0.222208] pci 0000:00:1e.0: transparent bridge
[ 0.222247] pci_bus 0000:00: on NUMA node 0
[ 0.222261] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.222605] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.222852] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.223038] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.223414] ACPI Error (dsfield-0140): [CAPB] Namespace lookup
failure, AE_ALREADY_EXISTS
[ 0.223428] ACPI Error (psparse-0537): Method parse/execution
failed [\_SB_.PCI0._OSC] (Node f7014b40), AE_ALREADY_EXISTS
[ 0.234318] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.234569] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.234816] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.235061] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.235308] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11
12) *0, disabled.
[ 0.235557] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11
12) *0, disabled.
[ 0.235805] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11
12) *0, disabled.
[ 0.236076] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11
12) *0, disabled.
[ 0.236484] SCSI subsystem initialized
[ 0.236564] libata version 3.00 loaded.
[ 0.236564] usbcore: registered new interface driver usbfs
[ 0.236564] usbcore: registered new interface driver hub
[ 0.236564] usbcore: registered new device driver usb
[ 0.236564] ACPI: WMI: Mapper loaded
[ 0.236564] PCI: Using ACPI for IRQ routing
[ 0.248021] Bluetooth: Core ver 2.15
[ 0.248067] NET: Registered protocol family 31
[ 0.248067] Bluetooth: HCI device and connection manager initialized
[ 0.248067] Bluetooth: HCI socket layer initialized
[ 0.248067] NetLabel: Initializing
[ 0.248067] NetLabel: domain hash size = 128
[ 0.248067] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.248077] NetLabel: unlabeled traffic allowed by default
[ 0.248144] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.248155] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.264024] pnp: PnP ACPI init
[ 0.264060] ACPI: bus type pnp registered
[ 0.268522] pnp: PnP ACPI: found 9 devices
[ 0.268528] ACPI: ACPI bus type pnp unregistered
[ 0.268535] PnPBIOS: Disabled by ACPI PNP
[ 0.268560] system 00:01: ioport range 0x600-0x60f has been reserved
[ 0.268567] system 00:01: ioport range 0x610-0x610 has been reserved
[ 0.268573] system 00:01: ioport range 0x800-0x80f has been reserved
[ 0.268580] system 00:01: ioport range 0x810-0x817 has been reserved
[ 0.268587] system 00:01: ioport range 0x400-0x47f has been reserved
[ 0.268594] system 00:01: ioport range 0x500-0x53f has been reserved
[ 0.268600] system 00:01: ioport range 0x380-0x381 has been reserved
[ 0.268610] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.268618] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.268626] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.268633] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.268641] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.268648] system 00:01: iomem range 0xfec00000-0xfec00fff could
not be reserved
[ 0.268656] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.303521] AppArmor: AppArmor Filesystem Enabled
[ 0.303587] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 0.303596] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.303606] pci 0000:00:1c.0: MEM window: 0x93000000-0x93ffffff
[ 0.303615] pci 0000:00:1c.0: PREFETCH window:
0x00000090000000-0x00000090ffffff
[ 0.303627] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.303634] pci 0000:00:1c.1: IO window: 0x1000-0x1fff
[ 0.303643] pci 0000:00:1c.1: MEM window: 0x92000000-0x92ffffff
[ 0.303653] pci 0000:00:1c.1: PREFETCH window:
0x00000091000000-0x00000091ffffff
[ 0.303665] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.303669] pci 0000:00:1e.0: IO window: disabled
[ 0.303678] pci 0000:00:1e.0: MEM window: disabled
[ 0.303686] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.303707] alloc irq_desc for 16 on node -1
[ 0.303713] alloc kstat_irqs on node -1
[ 0.303724] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.303734] pci 0000:00:1c.0: setting latency timer to 64
[ 0.303749] alloc irq_desc for 17 on node -1
[ 0.303753] alloc kstat_irqs on node -1
[ 0.303761] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.303770] pci 0000:00:1c.1: setting latency timer to 64
[ 0.303784] pci 0000:00:1e.0: setting latency timer to 64
[ 0.303793] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.303799] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.303805] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
[ 0.303811] pci_bus 0000:01: resource 1 mem: [0x93000000-0x93ffffff]
[ 0.303818] pci_bus 0000:01: resource 2 pref mem [0x90000000-0x90ffffff]
[ 0.303824] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff]
[ 0.303830] pci_bus 0000:02: resource 1 mem: [0x92000000-0x92ffffff]
[ 0.303837] pci_bus 0000:02: resource 2 pref mem [0x91000000-0x91ffffff]
[ 0.303843] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.303849] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[ 0.303917] NET: Registered protocol family 2
[ 0.304130] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.304741] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.305671] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.306101] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.306108] TCP reno registered
[ 0.306320] NET: Registered protocol family 1
[ 0.306440] Trying to unpack rootfs image as initramfs...
[ 0.501084] Switched to high resolution mode on CPU 1
[ 0.504021] Switched to high resolution mode on CPU 0
[ 0.652998] Freeing initrd memory: 7462k freed
[ 0.658622] Simple Boot Flag at 0x44 set to 0x1
[ 0.658987] cpufreq-nforce2: No nForce2 chipset.
[ 0.659046] Scanning for low memory corruption every 60 seconds
[ 0.659247] audit: initializing netlink socket (disabled)
[ 0.659274] type=2000 audit(1280072447.656:1): initialized
[ 0.677785] highmem bounce pool size: 64 pages
[ 0.677799] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.680922] VFS: Disk quotas dquot_6.5.2
[ 0.681051] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.682263] fuse init (API version 7.12)
[ 0.682453] msgmni has been set to 1706
[ 0.682900] alg: No test for stdrng (krng)
[ 0.682933] io scheduler noop registered
[ 0.682938] io scheduler anticipatory registered
[ 0.682942] io scheduler deadline registered
[ 0.683043] io scheduler cfq registered (default)
[ 0.683067] pci 0000:00:02.0: Boot video device
[ 0.700248] alloc irq_desc for 24 on node -1
[ 0.700255] alloc kstat_irqs on node -1
[ 0.700274] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.700291] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.700533] alloc irq_desc for 25 on node -1
[ 0.700538] alloc kstat_irqs on node -1
[ 0.700553] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.700569] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.700743] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.700952] ACPI Error (dsfield-0140): [CAPB] Namespace lookup
failure, AE_ALREADY_EXISTS
[ 0.700967] ACPI Error (psparse-0537): Method parse/execution
failed [\_SB_.PCI0._OSC] (Node f7014b40), AE_ALREADY_EXISTS
[ 0.701231] ACPI Error (dsfield-0140): [CAPB] Namespace lookup
failure, AE_ALREADY_EXISTS
[ 0.701245] ACPI Error (psparse-0537): Method parse/execution
failed [\_SB_.PCI0._OSC] (Node f7014b40), AE_ALREADY_EXISTS
[ 0.701532] ACPI Error (dsfield-0140): [CAPB] Namespace lookup
failure, AE_ALREADY_EXISTS
[ 0.701546] ACPI Error (psparse-0537): Method parse/execution
failed [\_SB_.PCI0._OSC] (Node f7014b40), AE_ALREADY_EXISTS
[ 0.701795] ACPI Error (dsfield-0140): [CAPB] Namespace lookup
failure, AE_ALREADY_EXISTS
[ 0.701809] ACPI Error (psparse-0537): Method parse/execution
failed [\_SB_.PCI0._OSC] (Node f7014b40), AE_ALREADY_EXISTS
[ 0.701912] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.703032] ACPI: AC Adapter [ACAD] (on-line)
[ 0.703171] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.703179] ACPI: Power Button [PWRF]
[ 0.703275] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.703282] ACPI: Power Button [PWRB]
[ 0.703376] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.703383] ACPI: Sleep Button [SLPB]
[ 0.703470] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 0.704370] ACPI: Lid Switch [LID0]
[ 0.705646] ACPI: SSDT 7e252c90 001F7 (v02 CASPER ERA 00003000
INTL 20051117)
[ 0.706486] ACPI: SSDT 7e251e10 001C1 (v02 CASPER ERA 00003001
INTL 20051117)
[ 0.708034] Marking TSC unstable due to TSC halts in idle
[ 0.708075] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.708136] processor LNXCPU:00: registered as cooling_device0
[ 0.708906] ACPI: SSDT 7e252f10 000D0 (v02 CASPER ERA 00003000
INTL 20051117)
[ 0.709671] ACPI: SSDT 7e250f10 00083 (v02 CASPER ERA 00003000
INTL 20051117)
[ 0.711317] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.711361] processor LNXCPU:01: registered as cooling_device1
[ 0.718605] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.718623] ACPI: Thermal Zone [TZ01] (64 C)
[ 0.718732] isapnp: Scanning for PnP cards...
[ 0.783449] ACPI: Battery Slot [BAT0] (battery present)
[ 1.072791] isapnp: No Plug & Play device found
[ 1.075486] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.078049] brd: module loaded
[ 1.079031] loop: module loaded
[ 1.079195] input: Macintosh mouse button emulation as
/devices/virtual/input/input4
[ 1.079355] ahci 0000:00:1f.2: version 3.0
[ 1.079381] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.079445] alloc irq_desc for 26 on node -1
[ 1.079450] alloc kstat_irqs on node -1
[ 1.079469] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
[ 1.079525] ahci: SSS flag set, parallel bus scan disabled
[ 1.079567] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3
Gbps 0x1 impl SATA mode
[ 1.079575] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio
slum part
[ 1.079584] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.079822] scsi0 : ahci
[ 1.080054] scsi1 : ahci
[ 1.080186] scsi2 : ahci
[ 1.080335] scsi3 : ahci
[ 1.080731] ata1: SATA max UDMA/133 abar m1024 at 0x94204000 port
0x94204100 irq 26
[ 1.080737] ata2: DUMMY
[ 1.080741] ata3: DUMMY
[ 1.080744] ata4: DUMMY
[ 1.082592] Fixed MDIO Bus: probed
[ 1.082672] PPP generic driver version 2.4.2
[ 1.082878] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.082921] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.082950] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.082957] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.083021] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 1
[ 1.083031] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.086973] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.086984] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.087014] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x94204400
[ 1.100031] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.100185] usb usb1: configuration #1 chosen from 1 choice
[ 1.100247] hub 1-0:1.0: USB hub found
[ 1.100264] hub 1-0:1.0: 8 ports detected
[ 1.100388] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.100428] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.100493] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.100528] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.100537] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.100609] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[ 1.100648] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080
[ 1.100813] usb usb2: configuration #1 chosen from 1 choice
[ 1.100872] hub 2-0:1.0: USB hub found
[ 1.100886] hub 2-0:1.0: 2 ports detected
[ 1.100972] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.100984] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.100991] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.101051] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 3
[ 1.101100] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00003060
[ 1.101263] usb usb3: configuration #1 chosen from 1 choice
[ 1.101321] hub 3-0:1.0: USB hub found
[ 1.101334] hub 3-0:1.0: 2 ports detected
[ 1.101418] alloc irq_desc for 18 on node -1
[ 1.101423] alloc kstat_irqs on node -1
[ 1.101443] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.101454] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.101461] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.101524] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 4
[ 1.101571] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
[ 1.101732] usb usb4: configuration #1 chosen from 1 choice
[ 1.101789] hub 4-0:1.0: USB hub found
[ 1.101803] hub 4-0:1.0: 2 ports detected
[ 1.101884] alloc irq_desc for 19 on node -1
[ 1.101889] alloc kstat_irqs on node -1
[ 1.101899] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.101910] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.101917] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.101986] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
bus number 5
[ 1.102033] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00003020
[ 1.102194] usb usb5: configuration #1 chosen from 1 choice
[ 1.102251] hub 5-0:1.0: USB hub found
[ 1.102265] hub 5-0:1.0: 2 ports detected
[ 1.102442] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at
0x60,0x64 irq 1,12
[ 1.110013] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.110027] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.110148] mice: PS/2 mouse device common for all mice
[ 1.110405] rtc_cmos 00:03: RTC can wake from S4
[ 1.110474] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.110515] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.110754] device-mapper: uevent: version 1.0.3
[ 1.110984] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01)
initialised: dm-devel at redhat.com
[ 1.111172] device-mapper: multipath: version 1.1.0 loaded
[ 1.111179] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.111463] EISA: Probing bus 0 at eisa.0
[ 1.111474] Cannot allocate resource for EISA slot 1
[ 1.111479] Cannot allocate resource for EISA slot 2
[ 1.111484] Cannot allocate resource for EISA slot 3
[ 1.111510] EISA: Detected 0 cards.
[ 1.111904] cpuidle: using governor ladder
[ 1.112149] cpuidle: using governor menu
[ 1.113294] TCP cubic registered
[ 1.113683] NET: Registered protocol family 10
[ 1.114644] lo: Disabled Privacy Extensions
[ 1.114941] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input5
[ 1.115511] NET: Registered protocol family 17
[ 1.115556] Bluetooth: L2CAP ver 2.13
[ 1.115562] Bluetooth: L2CAP socket layer initialized
[ 1.115569] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.115574] Bluetooth: SCO socket layer initialized
[ 1.116313] Bluetooth: RFCOMM TTY layer initialized
[ 1.116323] Bluetooth: RFCOMM socket layer initialized
[ 1.116329] Bluetooth: RFCOMM ver 1.11
[ 1.118028] Using IPI No-Shortcut mode
[ 1.118179] PM: Resume from disk failed.
[ 1.118202] registered taskstats version 1
[ 1.118434] Magic number: 2:608:690
[ 1.118475] mem mem: hash matches
[ 1.118556] rtc_cmos 00:03: setting system clock to 2010-07-25
15:40:48 UTC (1280072448)
[ 1.118564] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.118569] EDD information not available.
[ 1.400123] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.401270] ACPI Warning: \_SB_.PCI0.SATA.PRT0._GTF: Return type
mismatch - found Integer, expected Buffer 20090521 nspredef-940
[ 1.401287] ata1.00: _GTF unexpected object type 0x1
[ 1.401461] ata1.00: ATA-8: WDC WD2500BEVT-00A23T0, 01.01A01, max UDMA/133
[ 1.401473] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.402757] ata1.00: _GTF unexpected object type 0x1
[ 1.402997] ata1.00: configured for UDMA/133
[ 1.412128] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.416807] scsi 0:0:0:0: Direct-Access ATA WDC
WD2500BEVT-0 01.0 PQ: 0 ANSI: 5
[ 1.417092] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.417208] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks:
(250 GB/232 GiB)
[ 1.417339] sd 0:0:0:0: [sda] Write Protect is off
[ 1.417346] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.417415] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.417741] sda: sda1 sda2 sda3 < sda5 sda6
[ 1.500059] Clocksource tsc unstable (delta = -216885886 ns)
[ 1.511348] sda7 >
[ 1.512158] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.512205] Freeing unused kernel memory: 544k freed
[ 1.512680] Write protecting the kernel text: 4584k
[ 1.512761] Write protecting the kernel read-only data: 1844k
[ 1.547029] usb 1-1: configuration #1 chosen from 1 choice
[ 1.664116] usb 1-2: new high speed USB device using ehci_hcd and address 3
[ 1.843783] usb 1-2: configuration #1 chosen from 1 choice
[ 1.845050] Linux agpgart interface v0.103
[ 1.855690] agpgart-intel 0000:00:00.0: Intel IGD Chipset
[ 1.856212] agpgart-intel 0000:00:00.0: detected 8188K stolen memory
[ 1.859793] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[ 2.019749] [drm] Initialized drm 1.1.0 20060810
[ 2.040105] usb 1-8: new high speed USB device using ehci_hcd and address 5
[ 2.055506] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.055516] i915 0000:00:02.0: setting latency timer to 64
[ 2.062115] alloc irq_desc for 27 on node -1
[ 2.062125] alloc kstat_irqs on node -1
[ 2.062143] i915 0000:00:02.0: irq 27 for MSI/MSI-X
[ 2.072864] Initializing USB Mass Storage driver...
[ 2.073120] scsi4 : SCSI emulation for USB Mass Storage devices
[ 2.073346] usbcore: registered new interface driver usb-storage
[ 2.073355] USB Mass Storage support registered.
[ 2.073632] usb-storage: device found at 2
[ 2.073638] usb-storage: waiting for device to settle before scanning
[ 2.228762] usb 1-8: configuration #1 chosen from 1 choice
[ 2.291252] [drm] fb0: inteldrmfb frame buffer device
[ 2.298969] acpi device:24: registered as cooling_device2
[ 2.299849] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:22/input/input6
[ 2.299950] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 2.300004] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.468557] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 2.566541] [drm] Big FIFO is enabled
[ 2.628430] [drm] Big FIFO is enabled
[ 2.628447] [drm] LVDS-8: set mode 1024x600 e
[ 2.628553] [drm] Big FIFO is enabled
[ 2.650367] usb 3-1: configuration #1 chosen from 1 choice
[ 2.684146] usbcore: registered new interface driver hiddev
[ 2.697736] input: Logitech Logitech USB Optical Mouse as
/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input7
[ 2.697931] generic-usb 0003:046D:C019.0001: input,hidraw0: USB HID
v1.11 Mouse [Logitech Logitech USB Optical Mouse] on
usb-0000:00:1d.1-1/input0
[ 2.697970] usbcore: registered new interface driver usbhid
[ 2.697977] usbhid: v2.6:USB HID core driver
[ 2.990079] [drm] Big FIFO is enabled
[ 3.017131] Console: switching to colour frame buffer device 128x37
[ 3.531717] PM: Starting manual resume from disk
[ 3.531726] PM: Resume from partition 8:6
[ 3.531730] PM: Checking hibernation image.
[ 3.532062] PM: Resume from disk failed.
[ 3.564420] EXT4-fs (sda7): barriers enabled
[ 3.578626] kjournald2 starting: pid 381, dev sda7:8, commit
interval 5 seconds
[ 3.578804] EXT4-fs (sda7): delayed allocation enabled
[ 3.578812] EXT4-fs: file extents enabled
[ 3.581691] EXT4-fs: mballoc enabled
[ 3.581723] EXT4-fs (sda7): mounted filesystem with ordered data mode
[ 4.271683] type=1505 audit(1280072451.649:2):
operation="profile_load" pid=406 name=/sbin/dhclient3
[ 4.272263] type=1505 audit(1280072451.649:3):
operation="profile_load" pid=406
name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 4.272592] type=1505 audit(1280072451.653:4):
operation="profile_load" pid=406
name=/usr/lib/connman/scripts/dhclient-script
[ 4.303395] type=1505 audit(1280072451.682:5):
operation="profile_load" pid=407 name=/usr/bin/evince
[ 4.311677] type=1505 audit(1280072451.689:6):
operation="profile_load" pid=407 name=/usr/bin/evince-previewer
[ 4.316810] type=1505 audit(1280072451.697:7):
operation="profile_load" pid=407 name=/usr/bin/evince-thumbnailer
[ 4.354348] type=1505 audit(1280072451.733:8):
operation="profile_load" pid=409 name=/usr/lib/cups/backend/cups-pdf
[ 4.355037] type=1505 audit(1280072451.733:9):
operation="profile_load" pid=409 name=/usr/sbin/cupsd
[ 5.235069] Adding 4000144k swap on /dev/sda6. Priority:-1
extents:1 across:4000144k
[ 6.044961] udev: starting version 147
[ 6.915300] usbcore: registered new interface driver usbserial
[ 6.915358] USB Serial support registered for generic
[ 6.915501] usbcore: registered new interface driver usbserial_generic
[ 6.915509] usbserial: USB Serial Driver core
[ 6.986949] USB Serial support registered for GSM modem (1-port)
[ 6.987079] option 1-1:1.0: GSM modem (1-port) converter detected
[ 6.987268] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
[ 6.987329] option 1-1:1.1: GSM modem (1-port) converter detected
[ 6.987503] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
[ 6.987571] option 1-1:1.3: GSM modem (1-port) converter detected
[ 6.987759] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
[ 6.987857] usbcore: registered new interface driver option
[ 6.987863] option: v0.7.2:USB Driver for GSM modems
[ 6.994676] atl1c 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.994699] atl1c 0000:01:00.0: setting latency timer to 64
[ 6.994798] atl1c 0000:01:00.0: PME# disabled
[ 6.994812] atl1c 0000:01:00.0: PME# disabled
[ 7.072781] usb-storage: device scan complete
[ 7.073546] scsi 4:0:0:0: Direct-Access ZTE MMC Storage
2.31 PQ: 0 ANSI: 2
[ 7.074488] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 7.083389] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 7.110477] atl1c 0000:01:00.0: version 1.0.0.1-NAPI
[ 7.144253] Linux video capture interface: v2.00
[ 7.275001] lp: driver loaded but no devices found
[ 7.304736] uvcvideo: Found UVC 1.00 device USB Webcam (0408:03e0)
[ 7.331219] input: USB Webcam as
/devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input8
[ 7.331323] usbcore: registered new interface driver uvcvideo
[ 7.331330] USB Video Class driver (v0.1.0)
[ 7.557332] psmouse serio1: ID: 10 00 64
[ 7.591759] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 8.186083] input: ImExPS/2 Generic Explorer Mouse as
/devices/platform/i8042/serio1/input/input9
[ 8.756578] EXT4-fs (sda7): internal journal on sda7:8
[ 8.949955] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level,
low) -> IRQ 16
[ 8.950014] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9.170167] hda_codec: Unknown model for ALC272, trying auto-probe
from BIOS...
[ 9.171099] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input10
[ 9.663185] EXT4-fs (sda5): barriers enabled
[ 9.663532] kjournald2 starting: pid 757, dev sda5:8, commit
interval 5 seconds
[ 9.717704] EXT4-fs (sda5): internal journal on sda5:8
[ 9.717719] EXT4-fs (sda5): delayed allocation enabled
[ 9.717728] EXT4-fs: file extents enabled
[ 9.760274] EXT4-fs: mballoc enabled
[ 9.760312] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 10.938160] __ratelimit: 3 callbacks suppressed
[ 10.938171] type=1505 audit(1280061658.317:11):
operation="profile_replace" pid=827 name=/sbin/dhclient3
[ 10.938962] type=1505 audit(1280061658.317:12):
operation="profile_replace" pid=827
name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 10.939417] type=1505 audit(1280061658.317:13):
operation="profile_replace" pid=827
name=/usr/lib/connman/scripts/dhclient-script
[ 10.951805] type=1505 audit(1280061658.329:14):
operation="profile_replace" pid=828 name=/usr/bin/evince
[ 10.964560] type=1505 audit(1280061658.345:15):
operation="profile_replace" pid=828 name=/usr/bin/evince-previewer
[ 10.971618] type=1505 audit(1280061658.349:16):
operation="profile_replace" pid=828 name=/usr/bin/evince-thumbnailer
[ 10.982397] type=1505 audit(1280061658.361:17):
operation="profile_replace" pid=830
name=/usr/lib/cups/backend/cups-pdf
[ 10.983084] type=1505 audit(1280061658.361:18):
operation="profile_replace" pid=830 name=/usr/sbin/cupsd
[ 10.988319] type=1505 audit(1280061658.365:19):
operation="profile_replace" pid=831 name=/usr/sbin/tcpdump
[ 14.887989] ppdev: user-space parallel port driver
[ 16.083337] alloc irq_desc for 28 on node -1
[ 16.083348] alloc kstat_irqs on node -1
[ 16.083379] atl1c 0000:01:00.0: irq 28 for MSI/MSI-X
[ 16.084285] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.987417] CPU0 attaching NULL sched-domain.
[ 18.987428] CPU1 attaching NULL sched-domain.
[ 19.000660] CPU0 attaching sched-domain:
[ 19.000669] domain 0: span 0-1 level SIBLING
[ 19.000675] groups: 0 1
[ 19.000686] CPU1 attaching sched-domain:
[ 19.000691] domain 0: span 0-1 level SIBLING
[ 19.000697] groups: 1 0
[ 27.907274] CPU0 attaching NULL sched-domain.
[ 27.907285] CPU1 attaching NULL sched-domain.
[ 27.920181] CPU0 attaching sched-domain:
[ 27.920190] domain 0: span 0-1 level SIBLING
[ 27.920197] groups: 0 1
[ 27.920208] CPU1 attaching sched-domain:
[ 27.920213] domain 0: span 0-1 level SIBLING
[ 27.920218] groups: 1 0
[ 39.342652] CPU0 attaching NULL sched-domain.
[ 39.342666] CPU1 attaching NULL sched-domain.
[ 39.356173] CPU0 attaching sched-domain:
[ 39.356185] domain 0: span 0-1 level SIBLING
[ 39.356194] groups: 0 1
[ 39.356210] CPU1 attaching sched-domain:
[ 39.356218] domain 0: span 0-1 level SIBLING
[ 39.356226] groups: 1 0
[ 40.676303] CPU0 attaching NULL sched-domain.
[ 40.676318] CPU1 attaching NULL sched-domain.
[ 40.693973] CPU0 attaching sched-domain:
[ 40.693986] domain 0: span 0-1 level SIBLING
[ 40.693994] groups: 0 1
[ 40.694008] CPU1 attaching sched-domain:
[ 40.694015] domain 0: span 0-1 level SIBLING
[ 40.694021] groups: 1 0
[ 194.303330] Disabling lock debugging due to kernel taint
[ 194.323248] ndiswrapper version 1.55 loaded (smp=yes, preempt=no)
[ 194.368963] ndiswrapper (import:242): unknown symbol:
ntoskrnl.exe:'IoWMIQueryAllData'
[ 194.368996] ndiswrapper (import:242): unknown symbol:
ntoskrnl.exe:'IoWMIOpenBlock'
[ 194.369871] ndiswrapper (load_sys_files:206): couldn't prepare
driver 'net8192se'
[ 194.371216] ndiswrapper (load_wrap_driver:108): couldn't load
driver net8192se; check system log for messages from 'loadndisdriver'
[ 194.379180] usbcore: registered new interface driver ndiswrapper
[ 223.209597] PPP BSD Compression module registered
[ 223.224079] PPP Deflate Compression module registered
[ 458.327930] CPU0 attaching NULL sched-domain.
[ 458.327952] CPU1 attaching NULL sched-domain.
[ 458.340136] CPU0 attaching sched-domain:
[ 458.340146] domain 0: span 0-1 level SIBLING
[ 458.340153] groups: 0 1
[ 458.340164] CPU1 attaching sched-domain:
[ 458.340169] domain 0: span 0-1 level SIBLING
[ 458.340174] groups: 1 0
[ 1099.728067] type=1503 audit(1280062747.109:20): operation="open"
pid=2281 parent=2274 profile="/usr/sbin/cupsd" requested_mask="w::"
denied_mask="w::" fsuid=0 ouid=0 name="/dev/ttyUSB0"
[ 1099.728190] type=1503 audit(1280062747.109:21): operation="open"
pid=2281 parent=2274 profile="/usr/sbin/cupsd" requested_mask="w::"
denied_mask="w::" fsuid=0 ouid=0 name="/dev/ttyUSB1"
[ 1099.728275] type=1503 audit(1280062747.109:22): operation="open"
pid=2281 parent=2274 profile="/usr/sbin/cupsd" requested_mask="w::"
denied_mask="w::" fsuid=0 ouid=0 name="/dev/ttyUSB2"
[ 4823.852083] [drm] Big FIFO is enabled
[ 4843.906954] [drm] Big FIFO is enabled
[ 5746.328112] usb 3-1: USB disconnect, address 2
[ 5774.300073] usb 3-1: new low speed USB device using uhci_hcd and address 3
[ 5774.477397] usb 3-1: configuration #1 chosen from 1 choice
[ 5774.496283] input: Logitech Logitech USB Optical Mouse as
/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input11
[ 5774.496810] generic-usb 0003:046D:C019.0002: input,hidraw0: USB HID
v1.11 Mouse [Logitech Logitech USB Optical Mouse] on
usb-0000:00:1d.1-1/input0
[ 5785.584464] CPU0 attaching NULL sched-domain.
[ 5785.584479] CPU1 attaching NULL sched-domain.
[ 5785.596687] CPU0 attaching sched-domain:
[ 5785.596699] domain 0: span 0-1 level SIBLING
[ 5785.596708] groups: 0 1
[ 5785.596724] CPU1 attaching sched-domain:
[ 5785.596732] domain 0: span 0-1 level SIBLING
[ 5785.596740] groups: 1 0
[ 5785.837493] CPU0 attaching NULL sched-domain.
[ 5785.837509] CPU1 attaching NULL sched-domain.
[ 5785.852673] CPU0 attaching sched-domain:
[ 5785.852684] domain 0: span 0-1 level SIBLING
[ 5785.852692] groups: 0 1
[ 5785.852707] CPU1 attaching sched-domain:
[ 5785.852714] domain 0: span 0-1 level SIBLING
[ 5785.852722] groups: 1 0
[ 5817.177060] CPU0 attaching NULL sched-domain.
[ 5817.177074] CPU1 attaching NULL sched-domain.
[ 5817.192702] CPU0 attaching sched-domain:
[ 5817.192714] domain 0: span 0-1 level SIBLING
[ 5817.192723] groups: 0 1
[ 5817.192738] CPU1 attaching sched-domain:
[ 5817.192746] domain 0: span 0-1 level SIBLING
[ 5817.192753] groups: 1 0
[ 5838.471932] type=1503 audit(1280067485.849:23): operation="open"
pid=2650 parent=2643 profile="/usr/sbin/cupsd" requested_mask="w::"
denied_mask="w::" fsuid=0 ouid=0 name="/dev/ttyUSB0"
[ 5838.492214] type=1503 audit(1280067485.873:24): operation="open"
pid=2650 parent=2643 profile="/usr/sbin/cupsd" requested_mask="w::"
denied_mask="w::" fsuid=0 ouid=0 name="/dev/ttyUSB1"
[ 5838.492329] type=1503 audit(1280067485.873:25): operation="open"
pid=2650 parent=2643 profile="/usr/sbin/cupsd" requested_mask="w::"
denied_mask="w::" fsuid=0 ouid=0 name="/dev/ttyUSB2"
[ 7036.848110] hda-intel: azx_get_response timeout, switching to
polling mode: last cmd=0x021f0900
mavera at caspermini:~$
25 07 2010 tarihinde Talat UYARER <talat at uyarer.com> yazmış:
> Size yardımcı olabilmemiz için lspci ve dmesg cıktılarınızı bizimle
> paylasmalısınız. Sizden ricam bu bilgileri paylasabilir misiniz ?
>
>
> 25-07-2010 12:55, Muhammed BÜYÜKKURT yazmış:
>> merhabalar
>> casper minibook aldım
>> usb den ubuntu 9 u kurdum(10.4 açlımadı siyah ekranda takılı
>> kalıyordu.) ancak wireless i görmüyor
>> eskiden eeepc vardı, onda bios dan onboard devices kısmından
>> açıyordum ancak bunda öyle birşey de yok, ne yapacam şaşırdım kaldım
>>
>> --
>
>
> --
> ubuntu-tr mailing list
> ubuntu-tr at lists.ubuntu.com
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-tr
>
--
www.selcukbiyoloji.com
ubuntu-tr mesaj listesiyle ilgili
daha fazla bilgi