[ 0.000000] Linux version 2.6.22-14-rt (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP PREEMPT RT Mon Oct 15 01:05:51 GMT 2007 (Unofficial) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable) [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000c0000 - 00000000000cc000 (reserved) [ 0.000000] BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000000fcf0000 (usable) [ 0.000000] BIOS-e820: 000000000fcf0000 - 000000000fcff000 (ACPI data) [ 0.000000] BIOS-e820: 000000000fcff000 - 000000000fd00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000000fd00000 - 000000000fe80000 (usable) [ 0.000000] BIOS-e820: 000000000fe80000 - 0000000010000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 254MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 65152) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 65152 [ 0.000000] HighMem 65152 -> 65152 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 65152 [ 0.000000] On node 0 totalpages: 65152 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4040 pages, LIFO batch:0 [ 0.000000] Normal zone: 834 pages used for memmap [ 0.000000] Normal zone: 60222 pages, LIFO batch:15 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F6C70 checksum 0 [ 0.000000] ACPI: RSDP 000F6C70, 0014 (r0 SONY ) [ 0.000000] ACPI: RSDT 0FCFA665, 002C (r1 SONY U0 20020319 PTL 0) [ 0.000000] ACPI: FACP 0FCFEF64, 0074 (r1 SONY U0 20020319 PTL 1000000) [ 0.000000] ACPI: DSDT 0FCFA691, 48D3 (r1 SONY U0 20020319 PTL 100000B) [ 0.000000] ACPI: FACS 0FCFFFC0, 0040 [ 0.000000] ACPI: BOOT 0FCFEFD8, 0028 (r1 SONY U0 20020319 PTL 1) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:ef800000) [ 0.000000] Real-Time Preemption Support (C) 2004-2007 Ingo Molnar [ 0.000000] Built 1 zonelists. Total pages: 64262 [ 0.000000] Kernel command line: root=UUID=a4ed97c0-dc07-4619-a87d-7ab20514e30c ro quiet splash [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] mapped APIC to ffffd000 (0138d000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] WARNING: experimental RCU implementation. [ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes) [ 0.000000] Detected 993.707 MHz processor. [ 14.495439] Console: colour VGA+ 80x25 [ 14.496101] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 14.496722] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 14.522910] Memory: 245004k/260608k available (2056k kernel code, 14956k reserved, 970k data, 364k init, 0k highmem) [ 14.522933] virtual kernel memory layout: [ 14.522936] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 14.522939] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 14.522942] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB) [ 14.522945] lowmem : 0xc0000000 - 0xcfe80000 ( 254 MB) [ 14.522948] .init : 0xc03fb000 - 0xc0456000 ( 364 kB) [ 14.522951] .data : 0xc03022ec - 0xc03f4b44 ( 970 kB) [ 14.522954] .text : 0xc0100000 - 0xc03022ec (2056 kB) [ 14.522961] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 14.583216] Calibrating delay using timer specific routine.. 1988.19 BogoMIPS (lpj=994099) [ 14.583313] Security Framework v1.0.0 initialized [ 14.583330] SELinux: Disabled at boot. [ 14.583372] Mount-cache hash table entries: 512 [ 14.583691] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 [ 14.583716] CPU: L1 I cache: 16K, L1 D cache: 16K [ 14.583723] CPU: L2 cache: 256K [ 14.583730] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 [ 14.583752] Compat vDSO mapped to ffffe000. [ 14.583784] Checking 'hlt' instruction... OK. [ 14.587427] SMP alternatives: switching to UP code [ 14.587707] Freeing SMP alternatives: 9k freed [ 14.588273] Early unpacking initramfs... done [ 15.303205] ACPI: Core revision 20070126 [ 15.303477] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 15.312237] CPU0: Intel Pentium III (Coppermine) stepping 0a [ 15.312255] SMP motherboard not detected. [ 15.312260] Local APIC not detected. Using dummy APIC emulation. [ 15.313195] Brought up 1 CPUs [ 15.313531] Booting paravirtualized kernel on bare hardware [ 15.313689] Time: 12:04:22 Date: 10/04/107 [ 15.313811] NET: Registered protocol family 16 [ 15.314114] EISA bus registered [ 15.314140] ACPI: bus type pci registered [ 15.315463] PCI: PCI BIOS revision 2.10 entry at 0xfd9b0, last bus=1 [ 15.315469] PCI: Using configuration type 1 [ 15.315474] Setting up standard PCI resources [ 15.328744] ACPI: EC: Look up EC in DSDT [ 15.329365] ACPI: EC: GPE=0x1c, ports=0x66, 0x62 [ 15.333113] ACPI: Interpreter enabled [ 15.333127] ACPI: (supports S0 S3 S4 S5) [ 15.333159] ACPI: Using PIC for interrupt routing [ 15.379966] ACPI: EC: GPE=0x1c, ports=0x66, 0x62 [ 15.380127] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 15.380155] PCI: Probing PCI hardware (bus 00) [ 15.380509] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 15.380519] PCI quirk: region 1180-11bf claimed by ICH4 GPIO [ 15.381193] PCI: Firmware left 0000:01:08.0 e100 interrupts enabled, disabling [ 15.381277] PCI: Transparent bridge - 0000:00:1e.0 [ 15.381542] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 15.381662] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] [ 15.385845] ACPI: PCI Interrupt Link [LNKA] (IRQs *9) [ 15.386098] ACPI: PCI Interrupt Link [LNKB] (IRQs *9) [ 15.386347] ACPI: PCI Interrupt Link [LNKC] (IRQs 9) *0 [ 15.386588] ACPI: PCI Interrupt Link [LNKD] (IRQs 9) *0 [ 15.386871] ACPI: PCI Interrupt Link [LNKE] (IRQs *9) [ 15.387113] ACPI: PCI Interrupt Link [LNKH] (IRQs *9) [ 15.387384] Linux Plug and Play Support v0.97 (c) Adam Belay [ 15.387427] pnp: PnP ACPI init [ 15.387456] ACPI: bus type pnp registered [ 15.441219] pnp: PnP ACPI: found 13 devices [ 15.441228] ACPI: ACPI bus type pnp unregistered [ 15.441237] PnPBIOS: Disabled by ACPI PNP [ 15.441442] PCI: Using ACPI for IRQ routing [ 15.441451] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 15.445181] NET: Registered protocol family 8 [ 15.445187] NET: Registered protocol family 20 [ 15.445481] pnp: 00:01: iomem range 0xff00000-0xfffffff could not be reserved [ 15.445499] pnp: 00:02: iomem range 0xff800000-0xffffffff could not be reserved [ 15.476562] PCI: Bus 2, cardbus bridge: 0000:01:02.0 [ 15.476571] IO window: 00003400-000034ff [ 15.476578] IO window: 00003800-000038ff [ 15.476586] PREFETCH window: 20000000-23ffffff [ 15.476593] MEM window: 28000000-2bffffff [ 15.476600] PCI: Bus 6, cardbus bridge: 0000:01:02.1 [ 15.476605] IO window: 00003c00-00003cff [ 15.476626] IO window: 00001400-000014ff [ 15.476634] PREFETCH window: 24000000-27ffffff [ 15.476641] MEM window: 2c000000-2fffffff [ 15.476647] PCI: Bridge: 0000:00:1e.0 [ 15.476653] IO window: 3000-3fff [ 15.476662] MEM window: f4100000-f41fffff [ 15.476670] PREFETCH window: 20000000-27ffffff [ 15.476695] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 15.477309] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9 [ 15.477317] PCI: setting IRQ 9 as level-triggered [ 15.477323] ACPI: PCI Interrupt 0000:01:02.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 [ 15.477337] PCI: Setting latency timer of device 0000:01:02.0 to 64 [ 15.477742] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 [ 15.477748] ACPI: PCI Interrupt 0000:01:02.1[B] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9 [ 15.477760] PCI: Setting latency timer of device 0000:01:02.1 to 64 [ 15.477841] NET: Registered protocol family 2 [ 15.483757] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 15.483905] TCP established hash table entries: 8192 (order: 6, 360448 bytes) [ 15.485259] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 15.486734] TCP: Hash tables configured (established 8192 bind 8192) [ 15.486748] TCP reno registered [ 15.488967] checking if image is initramfs... it is [ 16.840044] Freeing initrd memory: 7160k freed [ 16.840513] Simple Boot Flag at 0x36 set to 0x1 [ 16.841240] audit: initializing netlink socket (disabled) [ 16.841344] audit(1194177862.867:1): initialized [ 16.841787] VFS: Disk quotas dquot_6.5.1 [ 16.841814] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 16.841947] io scheduler noop registered [ 16.841953] io scheduler anticipatory registered [ 16.841957] io scheduler deadline registered [ 16.841983] io scheduler cfq registered (default) [ 16.842017] Boot video device is 0000:00:02.0 [ 16.842748] isapnp: Scanning for PnP cards... [ 17.199539] isapnp: No Plug & Play device found [ 17.287923] Real Time Clock Driver v1.12ac [ 17.288266] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 17.288428] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 17.290435] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 17.291708] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9 [ 17.291723] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9 [ 17.291741] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [ 17.293705] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 17.294251] input: Macintosh mouse button emulation as /class/input/input0 [ 17.294515] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12 [ 17.297162] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 17.297335] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 17.297703] mice: PS/2 mouse device common for all mice [ 17.298026] EISA: Probing bus 0 at eisa.0 [ 17.298044] Cannot allocate resource for EISA slot 1 [ 17.298050] Cannot allocate resource for EISA slot 2 [ 17.298055] Cannot allocate resource for EISA slot 3 [ 17.298083] EISA: Detected 0 cards. [ 17.298329] TCP cubic registered [ 17.298353] NET: Registered protocol family 1 [ 17.298392] Using IPI No-Shortcut mode [ 17.298818] Magic number: 15:115:76 [ 17.300373] Freeing unused kernel memory: 364k freed [ 17.323887] input: AT Translated Set 2 keyboard as /class/input/input1 [ 18.870182] AppArmor: AppArmor initialized<5>audit(1194177864.867:2): type=1505 info="AppArmor initialized" pid=1147 [ 18.893925] fuse init (API version 7.8) [ 18.908384] Failure registering capabilities with primary security module. [ 18.932401] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 18.932416] ACPI: Processor [CPU0] (supports 8 throttling states) [ 18.939524] ACPI: Thermal Zone [ATF0] (50 C) [ 21.388921] Floppy drive(s): fd0 is 1.44M [ 21.395291] usbcore: registered new interface driver usbfs [ 21.397527] usbcore: registered new interface driver hub [ 21.405703] FDC 0 is a post-1991 82077 [ 21.405796] usbcore: registered new device driver usb [ 21.430385] SCSI subsystem initialized [ 21.466837] USB Universal Host Controller Interface driver v3.0 [ 21.468957] ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9 [ 21.468988] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 21.468996] uhci_hcd 0000:00:1f.2: UHCI Host Controller [ 21.469763] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 [ 21.470941] uhci_hcd 0000:00:1f.2: irq 9, io base 0x00001820 [ 21.472141] usb usb1: configuration #1 chosen from 1 choice [ 21.472534] hub 1-0:1.0: USB hub found [ 21.472556] hub 1-0:1.0: 2 ports detected [ 21.475047] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI [ 21.475057] e100: Copyright(c) 1999-2006 Intel Corporation [ 21.515496] libata version 2.21 loaded. [ 21.573959] PCI: Enabling device 0000:01:00.0 (0110 -> 0112) [ 21.574495] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9 [ 21.574503] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 [ 21.625869] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[9] MMIO=[f4101000-f41017ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 21.626691] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9 [ 21.626701] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKE] -> GSI 9 (level, low) -> IRQ 9 [ 21.628178] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9 [ 21.628185] ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNKH] -> GSI 9 (level, low) -> IRQ 9 [ 21.628207] PCI: Setting latency timer of device 0000:00:1f.4 to 64 [ 21.628215] uhci_hcd 0000:00:1f.4: UHCI Host Controller [ 21.629088] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 [ 21.629145] uhci_hcd 0000:00:1f.4: irq 9, io base 0x00002400 [ 21.630432] usb usb2: configuration #1 chosen from 1 choice [ 21.630964] hub 2-0:1.0: USB hub found [ 21.630991] hub 2-0:1.0: 2 ports detected [ 21.654259] e100: eth0: e100_probe: addr 0xf4100000, irq 9, MAC addr 08:00:46:28:4E:67 [ 21.733004] ata_piix 0000:00:1f.1: version 2.11 [ 21.733162] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 21.733514] scsi0 : ata_piix [ 21.734355] scsi1 : ata_piix [ 21.734659] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011800 irq 14 [ 21.734668] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011808 irq 15 [ 22.195074] ata1.00: ATA-5: IBM-DJSA-230, JS6OAC3A, max UDMA/66 [ 22.195087] ata1.00: 58605120 sectors, multi 16: LBA [ 22.201040] ata1.00: configured for UDMA/66 [ 22.505836] ata2.00: ATAPI: UJDA760 DVD/CDRW, 1.50, max UDMA/33 [ 22.662802] ata2.00: configured for UDMA/33 [ 22.663174] scsi 0:0:0:0: Direct-Access ATA IBM-DJSA-230 JS6O PQ: 0 ANSI: 5 [ 22.666253] scsi 1:0:0:0: CD-ROM MATSHITA UJDA760 DVD/CDRW 1.50 PQ: 0 ANSI: 5 [ 22.792820] sd 0:0:0:0: [sda] 58605120 512-byte hardware sectors (30006 MB) [ 22.792856] sd 0:0:0:0: [sda] Write Protect is off [ 22.792862] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 22.792905] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 22.793466] sd 0:0:0:0: [sda] 58605120 512-byte hardware sectors (30006 MB) [ 22.793494] sd 0:0:0:0: [sda] Write Protect is off [ 22.793500] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 22.793541] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 22.793554] sda:<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460300ab3c6a] [ 23.204140] sda1 sda2 sda3 < sda5 sda6 sda7 > sda4 [ 23.258469] sd 0:0:0:0: [sda] Attached SCSI disk [ 23.263269] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 23.263278] Uniform CD-ROM driver Revision: 3.20 [ 23.263907] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 23.286681] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 23.287061] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 24.246896] Attempting manual resume [ 24.246907] swsusp: Resume From Partition 8:5 [ 24.246912] PM: Checking swsusp image. [ 24.274377] PM: Resume from disk failed. [ 24.350492] kjournald starting. Commit interval 5 seconds [ 24.350526] EXT3-fs: mounted filesystem with ordered data mode. [ 37.828724] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex [ 40.170223] NET: Registered protocol family 17 [ 42.147506] input: PC Speaker as /class/input/input2 [ 42.502455] input: PS/2 Mouse as /class/input/input3 [ 42.516972] input: AlpsPS/2 ALPS GlidePoint as /class/input/input4 [ 43.001321] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 43.075065] Linux agpgart interface v0.102 (c) Dave Jones [ 43.118075] Intel 82802 RNG detected [ 43.183829] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 43.234732] agpgart: Detected an Intel i815 Chipset. [ 43.402032] agpgart: AGP aperture is 64M @ 0xf8000000 [ 43.402097] i810_smbus 0000:00:02.0: i810/i815 i2c device found. [ 43.626836] iTCO_vendor_support: vendor-support=0 [ 43.891268] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 43.903894] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware [ 43.903921] iTCO_wdt: No card detected [ 44.664604] parport_pc 00:0b: reported by Plug and Play ACPI [ 44.664673] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 45.006520] Yenta: CardBus bridge found at 0000:01:02.0 [104d:80df] [ 45.128927] Yenta: ISA IRQ mask 0x0c38, PCI irq 9 [ 45.128938] Socket status: 30000006 [ 45.128944] Yenta: Raising subordinate bus# of parent bus (#01) from #01 to #05 [ 45.128961] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff [ 45.128972] cs: IO port probe 0x3000-0x3fff: clean. [ 45.129438] pcmcia: parent PCI bridge Memory window: 0xf4100000 - 0xf41fffff [ 45.129446] pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x27ffffff [ 45.130582] Yenta: CardBus bridge found at 0000:01:02.1 [104d:80df] [ 45.252880] Yenta: ISA IRQ mask 0x0c38, PCI irq 9 [ 45.252889] Socket status: 30000006 [ 45.252895] Yenta: Raising subordinate bus# of parent bus (#01) from #05 to #09 [ 45.252908] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff [ 45.252916] cs: IO port probe 0x3000-0x3fff: clean. [ 45.253379] pcmcia: parent PCI bridge Memory window: 0xf4100000 - 0xf41fffff [ 45.253387] pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x27ffffff [ 45.767421] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9 [ 45.767466] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 46.030650] cs: IO port probe 0x100-0x3af: clean. [ 46.033375] cs: IO port probe 0x100-0x3af: clean. [ 46.035903] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 46.037315] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 46.038286] cs: IO port probe 0x820-0x8ff: clean. [ 46.039193] cs: IO port probe 0x820-0x8ff: clean. [ 46.039839] cs: IO port probe 0xc00-0xcf7: clean. [ 46.040820] cs: IO port probe 0xc00-0xcf7: clean. [ 46.042369] cs: IO port probe 0xa00-0xaff: clean. [ 46.045327] cs: IO port probe 0xa00-0xaff: clean. [ 46.179980] intel8x0_measure_ac97_clock: measured 50614 usecs [ 46.179995] intel8x0: clocking to 48000 [ 47.090938] loop: module loaded [ 47.164384] lp0: using parport0 (interrupt-driven). [ 47.387044] Adding 746980k swap on /dev/sda5. Priority:-1 extents:1 across:746980k [ 50.983044] EXT3 FS on sda4, internal journal [ 51.668936] NET: Registered protocol family 10 [ 51.669110] lo: Disabled Privacy Extensions [ 62.053912] eth0: no IPv6 routers present [ 62.725840] kjournald starting. Commit interval 5 seconds [ 62.726617] EXT3 FS on sda2, internal journal [ 62.726629] EXT3-fs: mounted filesystem with ordered data mode. [ 65.168002] input: Lid Switch as /class/input/input5 [ 65.168693] ACPI: Lid Switch [LID] [ 65.169763] input: Power Button (CM) as /class/input/input6 [ 65.170508] ACPI: Power Button (CM) [PWRB] [ 65.370047] No dock devices found. [ 65.482417] ACPI: Battery Slot [BAT1] (battery present) [ 65.483299] ACPI: Battery Slot [BAT2] (battery absent) [ 65.702834] ACPI: AC Adapter [ACAD] (on-line) [ 65.827258] ACPI: Video Device [GCH0] (multi-head: yes rom: yes post: no) [ 66.365122] speedstep: frequency transition measured seems out of range (6000 nSec), falling back to a safe one of 500000 nSec. [ 67.993915] ppdev: user-space parallel port driver [ 68.235713] audit(1194188713.906:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4850 profile="/usr/sbin/cupsd" [ 68.340091] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 68.340104] apm: overridden by ACPI. [ 68.647986] sonypi: Sony Programmable I/O Controller Driver v1.26. [ 68.652608] sonypi: please try the sony-laptop module instead and report failures, see also http://www.linux.it/~malattia/wiki/index.php/Sony_drivers [ 68.658692] sonypi: detected type2 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on [ 68.658712] sonypi: enabled at irq=11, port1=0x1080, port2=0x1084 [ 68.658717] sonypi: device allocated minor is 63 [ 68.662884] input: Sony Vaio Jogdial as /class/input/input7 [ 68.666056] input: Sony Vaio Keys as /class/input/input8 [ 68.928335] sony-laptop: Sony Notebook Control Driver v0.5. [ 68.935989] input: Sony Vaio Keys as /class/input/input9 [ 68.945796] input: Sony Vaio Jogdial as /class/input/input10 [ 69.728644] Failure registering capabilities with primary security module. [ 101.363808] Marking TSC unstable due to: cpufreq changes. [ 101.908028] Clocksource tsc unstable (delta = -150027610 ns)