[ubuntu-studio-users] Geonkick&EQ10Q en UBUNTU

[Erich Eickmeyer]

Hello again,


On 5/28/2020 11:44 PM, Yves Yves wrote:
> Thank-you for your reply & YES , requesting Geonkick is packaged for
> Debian would make it
> easier for everyone to install it in the future but we don't even know
> how to do that ?
> Nor do we know how to remove all traces of the older version, yet.
> Were guessing that to build the Redkite GUI toolkitwould be similar to
> the instructions you provided to build & install Geonkick?
>
>    git clone   https://github.com/iurie-sw/redkite
>
> |apt-get install build-essential apt-get install cmake apt-get install
> libcairo2-dev |
>
> Clone the code repository, compile and install
>
> |git clone https://gitlab.com/geontime/redkite.git mkdir redkite/build
> cd redkite/build cmake ../ make make install  &/or then:apt-get
> install build-essential apt-get install cmakeapt-get install qjackctl
> libjack-dev libsndfile-dev apt-get install rapidjson-devapt-get
> install lv2-dev followed by this;|
> git clonehttps://gitlab.com/iurie-sw/geonkick.git
> <https://gitlab.com/iurie-sw/geonkick.git>
>     mkdir geonkick/build
>     cd geonkick/build
>     cmake ../
>     make
>     make install
>
>  
> ------------------------------------------------------------------------
> *From:* ubuntu-studio-users
> <ubuntu-studio-users-bounces at lists.ubuntu.com> on behalf of Ross
> Gammon <rosco at ubuntustudio.org>
> *Sent:* Tuesday, May 26, 2020 2:02 PM
> *To:* ubuntu-studio-users at lists.ubuntu.com
> <ubuntu-studio-users at lists.ubuntu.com>
> *Subject:* Re: [ubuntu-studio-users] Geonkick&EQ10Q en UBUNTU
>  
> Hi,
>
> You will need to remove all traces of the old version to avoid problems.
>
> The location of the downloaded tarball should not matter according to
> the projects build instructions (see the README text at the bottom). You
> can build it in your home partition with normal user permissions. The
> "make install" step is where you will probably need "sudo" for
> permission to install it (normally under /usr):
> https://github.com/iurie-sw/geonkick
> It is a pretty standard make & make install build system with cmake.
> Although you need to build the Redkite GUI toolkit first.
>
> I copy the instructions here:
> On Debian, Ubuntu, Ubuntu Studio install:
>
> build and install first Redkite, than:
> apt-get install build-essential
> apt-get install cmake
> apt-get install qjackctl libjack-dev libsndfile-dev
> apt-get install rapidjson-dev
> apt-get install lv2-dev
>
> Build & install Geonkick
>
> Clone the Geonkick code repository, compile and install
>
>     git clone https://gitlab.com/iurie-sw/geonkick.git
>     mkdir geonkick/build
>     cd geonkick/build
>     cmake ../
>     make
>     make install
>
> Have you considered requesting that it is packaged for Debian to make it
> easy for everyone to install it in the future? Debian packages will
> eventually migrate to Ubuntu. It looks like it is Free software - GPL-3.
> https://wiki.debian.org/RFP
>
> On 25/05/2020 21:15, Yves Yves wrote:
> > Aloha Amigos.
> >
> >   We got Geonkick (Version *1.9.0*) thanks to UNFA's U-Tube video
> > instructions (starting at 20:16);
> > /https://www.youtube.com/watch?v=EtWSnbmdB9w/
> >
> > Now we would like to update that Geonkick version to the latest
> > (*2.1.1*) but this must be done with the tarball, which we downloaded
> > from GitHub ;
> > /https://github.com/iurie-sw/geonkick/releases/
> >
> > & extracted into a folder we made via the terminal called ; (
> > */usr/local/src* )
> >
> > btw; The previous Geonkick Version *1.9.0* appears to be located in the
> > folder called; ( */usr/lib/lv2/geonkick.lv2/* ) *?*
> >
> > We also prep'ed our system for making packages by running;
> >
> > |sudo apt-get install build-essential checkinstall sudo apt-get install
> > cvs subversion git-core mercurial sudo chown $USER /usr/local/src sudo
> > chmod u+rwx /usr/local/src |
> >
> > Due to a lack of knowledge, now we are STUCK & don't know how to proceed
> > . Nor how to get the GUI for the equalizer '*EQ10Q*' to appear in
> > Ardour, even after visiting their web-page & reading their instructions
> > ! Any help available for these two problems from anyone who can provide
> > instructions for a 'beginner' (/please/) ?
> >
> >
> >
>
>
>
I just wanted to mention that geonkick has been accepted and added to the Ubuntu repositories for Groovy Gorilla (future 20.10). It will be included in Ubuntu Studio's 20.10 release.
-- 
Erich Eickmeyer
Project Leader
Ubuntu Studio

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ubuntu.com/archives/ubuntu-studio-users/attachments/20200904/7edfbfa8/attachment.html>