[ubuntu-studio-users] [solved] Jack can´t start

[Joao Bruno]

On Wed, Mar 30, 2016 at 4:02 PM, Joao Bruno <joaobrunogalhetas at gmail.com>
wrote:

> looks like now is working well, should be that change of buttons on the
> interface, now i used the one on the right and starts by itself working
> well, without start in jackd in terminal.
> To be honest never noticed that button before..
>
> Thank you very much, JB
>
> PS- i will make several trials and if still working good i will put as
> solved.
>
> On Wed, Mar 30, 2016 at 3:44 PM, Joao Bruno <joaobrunogalhetas at gmail.com>
> wrote:
>
>> Ok,  I will do it. Just to be more precise, QjackCtl only works after I
>> run jackd from terminal and after run a software, I'm using ardour, if I
>> run QjackCtl before open ardour it fails and send me the usual failure
>> message.
>> On 30 Mar 2016 5:36 p.m., "Kaj Ailomaa" <zequence at mousike.me> wrote:
>>
>>> On Wed, Mar 30, 2016, at 04:33 PM, Kaj Ailomaa wrote:
>>> > On Wed, Mar 30, 2016, at 04:10 PM, Joao Bruno wrote:
>>> > > In this case I put default,  but I also did it with the both devices
>>> that
>>> > > appears, hw:0 or plughw:0, doesn't work as well. At this moment I
>>> started
>>> > > jackd by the terminal and after opened the QjackCtl and looks like is
>>> > > working correctly,  with the settings as default.
>>> > >
>>> > > Thank you, it was by your advice that jackd was working by terminal
>>> that
>>> > > I
>>> > > did this way, at least is working,  not by the regular way but is
>>> > > working.
>>> > >
>>> > > Thank you very much, JB
>>> > >
>>> >  default means hw:0. Better to choose the correct device in
>>> "Interface",
>>> >  rather than default. Why? Because each time you boot your computer,
>>> the
>>> >  device may be in a different order.
>>> >
>>> > Again, under "Interface", select the correct device, the start jack.
>>>
>>> btw, there are two buttons next to "Interface". Confusing, I know. It is
>>> the one to the right you should use, no the one to the left.
>>>
>>> --
>>> ubuntu-studio-users mailing list
>>> ubuntu-studio-users at lists.ubuntu.com
>>> Modify settings or unsubscribe at:
>>> https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ubuntu.com/archives/ubuntu-studio-users/attachments/20160330/d3f4e165/attachment.html>