[ubuntu-studio-users] using apogee duet audio interface

[Eddie Coffey]

I want to thank everyone for their imput. This is the first usb powered
device i have tried with ubuntu. I borrowed it from my son, who uses a mac
book pro.I figure if the system sees it, I should be able to make it work.
If successful i will post settings for anyone else wanting to use it. thank
once again everyone for their help


On Thu, Oct 24, 2013 at 10:00 PM, Mike Holstein <mikeh789 at gmail.com> wrote:

>
>
>
> On Thu, Oct 24, 2013 at 10:36 PM, Eddie Coffey <ecoffey57 at gmail.com>wrote:
>
>> with a stereo track, it clips with a phantom powered mic with no power on
>> the mic. The mute button doesn't stop it. am confused.
>>
>
> id keep it simple in the beginning.. just try and get something playing
> back through the unit. try and get something playing back through some
> effects or other software, then through the unit. if ardour is confusing,
> test with something simpler when you get to testing audio input. remember
> that, as far as i see it, you are just a few hours from having gotten this
> thing working in linux, so, relax.. there are many things to absorb. good
> luck!
>
>
>>
>>
>> On Thu, Oct 24, 2013 at 9:27 PM, Eddie Coffey <ecoffey57 at gmail.com>wrote:
>>
>>> something i've noticed in ardour, is if i create a mono track, i barely
>>> get a signal, if a create a stereo track, i get so much signal i can't
>>> control it. i can run the volume on the track all the way to zero and it
>>> still clips, so any ideas?
>>>
>>>
>>> On Thu, Oct 24, 2013 at 8:37 PM, Eddie Coffey <ecoffey57 at gmail.com>wrote:
>>>
>>>> eddie at eddie-MS-7529:~$ amixer -c1
>>>> Simple mixer control 'Input Volume Control',0
>>>>   Capabilities: cvolume penum
>>>>   Capture channels: Front Left - Front Right
>>>>   Limits: Capture 0 - 75
>>>>   Front Left: Capture 75 [100%] [75.00dB]
>>>>   Front Right: Capture 75 [100%] [75.00dB]
>>>> Simple mixer control 'Output Volume Control',0
>>>>   Capabilities: pvolume pswitch penum
>>>>   Playback channels: Front Left - Front Right - Rear Left - Rear Right
>>>>   Limits: Playback 0 - 64
>>>>   Mono:
>>>>   Front Left: Playback 64 [100%] [0.00dB] [on]
>>>>   Front Right: Playback 64 [100%] [0.00dB] [on]
>>>>   Rear Left: Playback 64 [100%] [0.00dB] [on]
>>>>   Rear Right: Playback 64 [100%] [0.00dB] [on]
>>>> Simple mixer control 'Output Volume Control',1
>>>>   Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
>>>>   Playback channels: Mono
>>>>   Limits: Playback 0 - 64
>>>>   Mono: Playback 64 [100%] [0.00dB] [on]
>>>> eddie at eddie-MS-7529:~$
>>>>
>>>>
>>>> On Thu, Oct 24, 2013 at 8:21 PM, Ralf Mardorf <
>>>> ralf.mardorf at alice-dsl.net> wrote:
>>>>
>>>>> On Thu, 2013-10-24 at 19:55 -0500, Eddie Coffey wrote:
>>>>> > In jack i chose hw1, which is duet usb, for input and output device.
>>>>> > In alsa mixer in the capture screen initally the digital output was
>>>>> 24
>>>>> > and all other outputs in the capture screen were 0. I maxed the
>>>>> > digital, capture1 capture L&R, front and rear mic imputs out. With a
>>>>> > sm58 mic, I am getting some signal, but not usable. still not getting
>>>>> > any phantom power
>>>>>
>>>>> amixer -c1 contents
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> ubuntu-studio-users mailing list
>>>>> ubuntu-studio-users at lists.ubuntu.com
>>>>> Modify settings or unsubscribe at:
>>>>> https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
>>>>>
>>>>
>>>>
>>>
>>
>> --
>> ubuntu-studio-users mailing list
>> ubuntu-studio-users at lists.ubuntu.com
>> Modify settings or unsubscribe at:
>> https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
>>
>>
>
>
> --
> MH
>
> mikeholstein.info <http://www.mikeholstein.info/>
>
>
> --
> ubuntu-studio-users mailing list
> ubuntu-studio-users at lists.ubuntu.com
> Modify settings or unsubscribe at:
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ubuntu.com/archives/ubuntu-studio-users/attachments/20131024/ffdde773/attachment.html>