terratec phase x24 and freebob

[altern]

hi

i am trying to run my firewire terratec phase x24 with freebob under 
UbuntuStudio. I have been trying all kinds of solutions with no luck. 
This is the error i get when running qjackctl

**********************
22:00:58.210 /usr/bin/jackd -R -dfreebob -r44100 -p1024 -n2 -i0 -o0
22:00:58.211 JACK was started with PID=8876 (0x22ac).
cannot write to jackstart sync pipe 4 (Bad file descriptor)
jackd: wait for startup process exit failed
jackd 0.102.20
Copyright 2001-2005 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK compiled with System V SHM support.
cannot remove `/dev/shm/jack-1002' (Permission denied)
loading driver ..
Freebob using Firewire port 0, node -1
Warning (bebob_light/bebob_light_avdevice.cpp)[995] 
discoverStep10Plug: discoverStep10Plug: unknown stream format for 
channel (1)
Warning (bebob_light/bebob_light_avdevice.cpp)[995] 
discoverStep10Plug: discoverStep10Plug: unknown stream format for 
channel (1)
Warning (bebob_light/bebob_light_avdevice.cpp)[995] 
discoverStep10Plug: discoverStep10Plug: unknown stream format for 
channel (1)
Warning (bebob_light/bebob_light_avdevice.cpp)[995] 
discoverStep10Plug: discoverStep10Plug: unknown stream format for 
channel (1)
Warning (bebob_light/bebob_light_avdevice.cpp)[995] 
discoverStep10Plug: discoverStep10Plug: unknown stream format for 
channel (1)
Warning (bebob_light/bebob_light_avdevice.cpp)[995] 
discoverStep10Plug: discoverStep10Plug: unknown stream format for 
channel (1)
Warning (bebob_light/bebob_light_avdevice.cpp)[995] 
discoverStep10Plug: discoverStep10Plug: unknown stream format for 
channel (1)
Warning (bebob_light/bebob_light_avdevice.cpp)[995] 
discoverStep10Plug: discoverStep10Plug: unknown stream format for 
channel (1)
Warning (bebob_light/bebob_light_avdevice.cpp)[995] 
discoverStep10Plug: discoverStep10Plug: unknown stream format for 
channel (1)
Warning (bebob_light/bebob_light_avdevice.cpp)[995] 
discoverStep10Plug: discoverStep10Plug: unknown stream format for 
channel (1)
Warning (bebob_light/bebob_light_avdevice.cpp)[995] 
discoverStep10Plug: discoverStep10Plug: unknown stream format for 
channel (1)
Warning (bebob_light/bebob_light_avdevice.cpp)[995] 
discoverStep10Plug: discoverStep10Plug: unknown stream format for 
channel (1)
FreeBoB ERR: FREEBOB: Error creating virtual device
cannot load driver module freebob
22:00:59.313 JACK was stopped successfully.
22:00:59.313 Post-shutdown script...
22:00:59.314 killall jackd
jackd: ez da prozesurik hil
22:00:59.535 Post-shutdown script terminated with exit status=256.
22:01:00.274 Could not connect to JACK server as client. Please check 
the messages window for more info.
**********************

if i run qjackctl as sudo the only difference is that i dont get the
"cannot remove `/dev/shm/jack-1002' (Permission denied)"
but the rest is the same. I can see that raw1394 is loaded if i do 
lsmod. I already tried changing permissions to /dev/raw1394 and I also 
tried to change
sudo gedit /etc/udev/rules.d/40-permissions.rules
KERNEL=="raw1394", GROUP="disk"
to
KERNEL=="raw1394", GROUP="audio"

same error always. I am trying to reset the bus with scanbus and 
restarting the machine but no changes at all.

I am running 2.6.20-16-lowlatency kernel with ubuntu Feisty on a IBM X32 
laptop.

The funniest of all is that I tried to run PureDyne live cd and the 
soundcard works fine out of the box. So it can be done...

any tips will be welcome. thanks

enrike