[Bug 2083754] Re: [SRU] Failed to upgrade xdiagnose (3.8.10ubuntu1) over (3.8.10)
Nathan Teodosio
2083754 at bugs.launchpad.net
Mon Dec 16 10:14:23 UTC 2024
In 24.10 I enabled proposed and installed xdiagnose with 'apt install
xdiagnose/oracular-proposed'.
The installation completed normally and dpkg -l xdiagnose says
ii xdiagnose 3.8.12~24.10.1 all X.org diagnosis tool
** Description changed:
Impact
------
Xdiagnose fails to install and causes disruption on upgrades. This very
bug has many people affected and a handful of duplicates, and there are
some external reports:
https://askubuntu.com/questions/1530070/problem-installing-xdiagnose
https://ubuntuforums.org/showthread.php?t=2502192
Test case
---------
Install the package from the proposed pocket. It should install and not
raise a Dpkg error. 'dpkg -l xdiagnose' should say
- ii xdiagnose 3.8.11ubuntu1 all X.org diagnosis tool
+ ii xdiagnose ${versionInProposed} all X.org diagnosis
+ tool
Regression potential
--------------------
Regression could manifest as a missing failsafe-x Systemd service. This
can be ruled out with 'systemctl status failsafe-x'.
Notes
-----
There will be a bunch of Python "SyntaxWarning: invalid escape sequence"
when installing. These warnings do not have to do with the fix and are
already tracked elsewhere (LP:2089003).
Original report
---------------
System was upgraded from 24.04 to 24.10. Now, when I attempt to install
available package upgrades, I get this error:
$ sudo aptitude upgrade
The following packages will be upgraded:
xdiagnose
1 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/57.4 kB of archives. After unpacking 2,048 B will be freed.
Do you want to continue? [Y/n/?] y
(Reading database ... 291217 files and directories currently installed.)
Preparing to unpack .../xdiagnose_3.8.10ubuntu1_all.deb ...
Unpacking xdiagnose (3.8.10ubuntu1) over (3.8.10) ...
dpkg: error processing archive /var/cache/apt/archives/xdiagnose_3.8.10ubuntu1_all.deb (--unpack):
unable to open '/usr/lib/systemd/system/failsafe-x.service.dpkg-new': No such file or directory
No apport report written because the error message indicates an issue on the local system
/usr/lib/python3/dist-packages/xdiagnose/applet.py:185: SyntaxWarning: invalid escape sequence '\w'
re_kparam = re.compile("^([\w\.]+)=(.*)")
/usr/lib/python3/dist-packages/xdiagnose/applet.py:195: SyntaxWarning: invalid escape sequence '\w'
re_kparam = re.compile("^([\w\.]+)=(.*)")
/usr/lib/python3/dist-packages/xdiagnose/applet.py:324: SyntaxWarning: invalid escape sequence '\['
re_xorg_error = re.compile("^\[\s*([\d\.]+)\] \(EE\) (.*)$")
/usr/lib/python3/dist-packages/xdiagnose/applet.py:325: SyntaxWarning: invalid escape sequence '\['
re_dmesg_error = re.compile("^\[\s*(\d+\.\d+)\] (.*(?:BUG|ERROR|WARNING).*)$")
/usr/lib/python3/dist-packages/xdiagnose/applet.py:326: SyntaxWarning: invalid escape sequence '\d'
re_jockey_error = re.compile("^(\d+\-\d+-\d+ \d+:\d+:\d+,\d+) ERROR: (.*)$")
/usr/lib/python3/dist-packages/xdiagnose/config_update.py:105: SyntaxWarning: invalid escape sequence '\s'
re_param = re.compile("^\s*(\w+)\s*"+delim+"\s*(.*)")
/usr/lib/python3/dist-packages/xdiagnose/config_update.py:105: SyntaxWarning: invalid escape sequence '\s'
re_param = re.compile("^\s*(\w+)\s*"+delim+"\s*(.*)")
/usr/lib/python3/dist-packages/xdiagnose/config_update.py:133: SyntaxWarning: invalid escape sequence '\s'
p = re.compile("^\s*"+key+"\s*"+delim+"\s*(\"?)(.*)(\"?)")
/usr/lib/python3/dist-packages/xdiagnose/config_update.py:133: SyntaxWarning: invalid escape sequence '\s'
p = re.compile("^\s*"+key+"\s*"+delim+"\s*(\"?)(.*)(\"?)")
/usr/lib/python3/dist-packages/xdiagnose/config_update.py:133: SyntaxWarning: invalid escape sequence '\s'
p = re.compile("^\s*"+key+"\s*"+delim+"\s*(\"?)(.*)(\"?)")
/usr/lib/python3/dist-packages/xdiagnose/config_update.py:145: SyntaxWarning: invalid escape sequence '\s'
p = re.compile("^\s*"+key+"\s*"+delim)
/usr/lib/python3/dist-packages/xdiagnose/config_update.py:145: SyntaxWarning: invalid escape sequence '\s'
p = re.compile("^\s*"+key+"\s*"+delim)
/usr/lib/python3/dist-packages/xdiagnose/config_update.py:175: SyntaxWarning: invalid escape sequence '\o'
'BAR': 'f(1&&2*$i^2) # \o/',
/usr/lib/python3/dist-packages/xdiagnose/edid.py:67: SyntaxWarning: invalid escape sequence '\('
re_head = re.compile("\(II\) .*\(\d+\): EDID \(in hex\):$")
/usr/lib/python3/dist-packages/xdiagnose/edid.py:68: SyntaxWarning: invalid escape sequence '\('
re_edid = re.compile("\(II\) .*\(\d+\):\s\t([0-9a-f]{32})$")
/usr/lib/python3/dist-packages/xdiagnose/edid.py:287: SyntaxWarning: invalid escape sequence '\('
regex = re.compile("\(II\) .*\(\d+\):\s+(.*)$")
/usr/lib/python3/dist-packages/xdiagnose/pci_devices.py:97: SyntaxWarning: invalid escape sequence '\/'
PciDevice('i945g', '(8086:2772|945G[ \/])', [INTEL], gen='i945', opengl='1.4' ),
/usr/lib/python3/dist-packages/xdiagnose/pci_devices.py:99: SyntaxWarning: invalid escape sequence '\/'
PciDevice('i945gm', '(8086:27a2|945GM[ \/])', [INTEL], gen='i945', opengl='1.4' ),
/usr/lib/python3/dist-packages/xdiagnose/utils/config.py:16: SyntaxWarning: invalid escape sequence '\)'
'''Yet another INI-style config file parser.
/usr/lib/python3/dist-packages/xdiagnose/xorglog.py:94: SyntaxWarning: invalid escape sequence '\('
m = re.search('\(II\) Loading.*modules\/drivers\/(.+)_drv\.so', line)
Errors were encountered while processing:
/var/cache/apt/archives/xdiagnose_3.8.10ubuntu1_all.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
** Tags removed: verification-needed-oracular
** Tags added: verification-done-oracular
** Changed in: xdiagnose (Ubuntu Noble)
Status: Fix Committed => Triaged
--
You received this bug notification because you are a member of Ubuntu
Sponsors, which is subscribed to the bug report.
https://bugs.launchpad.net/bugs/2083754
Title:
[SRU] Failed to upgrade xdiagnose (3.8.10ubuntu1) over (3.8.10)
Status in xdiagnose:
New
Status in xdiagnose package in Ubuntu:
Fix Released
Status in xdiagnose source package in Noble:
Triaged
Status in xdiagnose source package in Oracular:
Fix Committed
Bug description:
Impact
------
Xdiagnose fails to install and causes disruption on upgrades. This
very bug has many people affected and a handful of duplicates, and
there are some external reports:
https://askubuntu.com/questions/1530070/problem-installing-xdiagnose
https://ubuntuforums.org/showthread.php?t=2502192
Test case
---------
Install the package from the proposed pocket. It should install and
not raise a Dpkg error. 'dpkg -l xdiagnose' should say
ii xdiagnose ${versionInProposed} all X.org diagnosis
tool
Regression potential
--------------------
Regression could manifest as a missing failsafe-x Systemd service.
This can be ruled out with 'systemctl status failsafe-x'.
Notes
-----
There will be a bunch of Python "SyntaxWarning: invalid escape
sequence" when installing. These warnings do not have to do with the
fix and are already tracked elsewhere (LP:2089003).
Original report
---------------
System was upgraded from 24.04 to 24.10. Now, when I attempt to
install available package upgrades, I get this error:
$ sudo aptitude upgrade
The following packages will be upgraded:
xdiagnose
1 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/57.4 kB of archives. After unpacking 2,048 B will be freed.
Do you want to continue? [Y/n/?] y
(Reading database ... 291217 files and directories currently installed.)
Preparing to unpack .../xdiagnose_3.8.10ubuntu1_all.deb ...
Unpacking xdiagnose (3.8.10ubuntu1) over (3.8.10) ...
dpkg: error processing archive /var/cache/apt/archives/xdiagnose_3.8.10ubuntu1_all.deb (--unpack):
unable to open '/usr/lib/systemd/system/failsafe-x.service.dpkg-new': No such file or directory
No apport report written because the error message indicates an issue on the local system
/usr/lib/python3/dist-packages/xdiagnose/applet.py:185: SyntaxWarning: invalid escape sequence '\w'
re_kparam = re.compile("^([\w\.]+)=(.*)")
/usr/lib/python3/dist-packages/xdiagnose/applet.py:195: SyntaxWarning: invalid escape sequence '\w'
re_kparam = re.compile("^([\w\.]+)=(.*)")
/usr/lib/python3/dist-packages/xdiagnose/applet.py:324: SyntaxWarning: invalid escape sequence '\['
re_xorg_error = re.compile("^\[\s*([\d\.]+)\] \(EE\) (.*)$")
/usr/lib/python3/dist-packages/xdiagnose/applet.py:325: SyntaxWarning: invalid escape sequence '\['
re_dmesg_error = re.compile("^\[\s*(\d+\.\d+)\] (.*(?:BUG|ERROR|WARNING).*)$")
/usr/lib/python3/dist-packages/xdiagnose/applet.py:326: SyntaxWarning: invalid escape sequence '\d'
re_jockey_error = re.compile("^(\d+\-\d+-\d+ \d+:\d+:\d+,\d+) ERROR: (.*)$")
/usr/lib/python3/dist-packages/xdiagnose/config_update.py:105: SyntaxWarning: invalid escape sequence '\s'
re_param = re.compile("^\s*(\w+)\s*"+delim+"\s*(.*)")
/usr/lib/python3/dist-packages/xdiagnose/config_update.py:105: SyntaxWarning: invalid escape sequence '\s'
re_param = re.compile("^\s*(\w+)\s*"+delim+"\s*(.*)")
/usr/lib/python3/dist-packages/xdiagnose/config_update.py:133: SyntaxWarning: invalid escape sequence '\s'
p = re.compile("^\s*"+key+"\s*"+delim+"\s*(\"?)(.*)(\"?)")
/usr/lib/python3/dist-packages/xdiagnose/config_update.py:133: SyntaxWarning: invalid escape sequence '\s'
p = re.compile("^\s*"+key+"\s*"+delim+"\s*(\"?)(.*)(\"?)")
/usr/lib/python3/dist-packages/xdiagnose/config_update.py:133: SyntaxWarning: invalid escape sequence '\s'
p = re.compile("^\s*"+key+"\s*"+delim+"\s*(\"?)(.*)(\"?)")
/usr/lib/python3/dist-packages/xdiagnose/config_update.py:145: SyntaxWarning: invalid escape sequence '\s'
p = re.compile("^\s*"+key+"\s*"+delim)
/usr/lib/python3/dist-packages/xdiagnose/config_update.py:145: SyntaxWarning: invalid escape sequence '\s'
p = re.compile("^\s*"+key+"\s*"+delim)
/usr/lib/python3/dist-packages/xdiagnose/config_update.py:175: SyntaxWarning: invalid escape sequence '\o'
'BAR': 'f(1&&2*$i^2) # \o/',
/usr/lib/python3/dist-packages/xdiagnose/edid.py:67: SyntaxWarning: invalid escape sequence '\('
re_head = re.compile("\(II\) .*\(\d+\): EDID \(in hex\):$")
/usr/lib/python3/dist-packages/xdiagnose/edid.py:68: SyntaxWarning: invalid escape sequence '\('
re_edid = re.compile("\(II\) .*\(\d+\):\s\t([0-9a-f]{32})$")
/usr/lib/python3/dist-packages/xdiagnose/edid.py:287: SyntaxWarning: invalid escape sequence '\('
regex = re.compile("\(II\) .*\(\d+\):\s+(.*)$")
/usr/lib/python3/dist-packages/xdiagnose/pci_devices.py:97: SyntaxWarning: invalid escape sequence '\/'
PciDevice('i945g', '(8086:2772|945G[ \/])', [INTEL], gen='i945', opengl='1.4' ),
/usr/lib/python3/dist-packages/xdiagnose/pci_devices.py:99: SyntaxWarning: invalid escape sequence '\/'
PciDevice('i945gm', '(8086:27a2|945GM[ \/])', [INTEL], gen='i945', opengl='1.4' ),
/usr/lib/python3/dist-packages/xdiagnose/utils/config.py:16: SyntaxWarning: invalid escape sequence '\)'
'''Yet another INI-style config file parser.
/usr/lib/python3/dist-packages/xdiagnose/xorglog.py:94: SyntaxWarning: invalid escape sequence '\('
m = re.search('\(II\) Loading.*modules\/drivers\/(.+)_drv\.so', line)
Errors were encountered while processing:
/var/cache/apt/archives/xdiagnose_3.8.10ubuntu1_all.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
To manage notifications about this bug go to:
https://bugs.launchpad.net/xdiagnose/+bug/2083754/+subscriptions
More information about the Ubuntu-sponsors
mailing list