[Bug 1877617] Re: open-iscsi automatic scans disable AND groovy merge with upstream

Mon May 11 19:23:37 UTC 2020

Sure Ben,

I have also suggested Debian maintainers:

https://salsa.debian.org/linux-blocks-team/open-iscsi/-/merge_requests/1
https://salsa.debian.org/linux-blocks-team/open-iscsi/-/merge_requests/2
https://salsa.debian.org/linux-blocks-team/open-iscsi/-/merge_requests/3

to sync with upstream. Will give them a while to provide answers so I
can merge/sync with Debian. If, by any chance, they don't sync with
upstream, I'll move Ubuntu forward to 2.1.1 and let them to catch up
eventually.

Cheers

-- 
You received this bug notification because you are a member of Ubuntu
Sponsors Team, which is subscribed to the bug report.
https://bugs.launchpad.net/bugs/1877617

Title:
  open-iscsi automatic scans disable AND groovy merge with upstream

Status in open-iscsi package in Ubuntu:
  Triaged
Status in open-iscsi source package in Bionic:
  In Progress
Status in open-iscsi source package in Eoan:
  In Progress
Status in open-iscsi source package in Focal:
  In Progress
Status in open-iscsi source package in Groovy:
  Triaged

Bug description:
  [Impact]

  When using iSCSI storage underneath cloud applications such as
  OpenStack or Kubernetes, the automatic bus scan on login causes
  problems, because it results in SCSI disks being registered in the
  kernel that will never get cleaned up, and when those disks are
  eventually deleted off the server, I/O errors begin to accumulate,
  eventually slowing down the whole SCSI subsystem, spamming the kernel
  log, and causing timeouts at higher levels such that users are forced
  to reboot the node to get back to a usable state.

  [Test Case]

  ################

  # To demonstrate this problem, I create a VM running Ubuntu 20.04.0

  # Install both iSCSI initiator and target on this host
  sudo apt-get -y install open-iscsi targetcli-fb

  # Start the services
  sudo systemctl start iscsid.service targetclid.service

  # Create a randomly generated target IQN
  TARGET_IQN=$(iscsi-iname)

  # Get the initator IQN
  INITIATOR_IQN=$(sudo awk -F = '/InitiatorName=/ {print $2}' /etc/iscsi/initiatorname.iscsi)

  # Set up an iSCSI target and target portal, and grant access to ourselves
  sudo targetcli /iscsi create $TARGET_IQN
  sudo targetcli /iscsi/$TARGET_IQN/tpg1/acls create $INITIATOR_IQN

  # Create two 1GiB LUNs backed by files, and expose them through the target portal
  sudo targetcli /backstores/fileio create lun1 /lun1 1G
  sudo targetcli /iscsi/$TARGET_IQN/tpg1/luns create /backstores/fileio/lun1 1
  sudo targetcli /backstores/fileio create lun2 /lun2 1G
  sudo targetcli /iscsi/$TARGET_IQN/tpg1/luns create /backstores/fileio/lun2 2

  # Truncate the kernel log so we can see messages after this point only
  sudo dmesg -C

  # Register the local iSCSI target with out initiator, and login
  sudo iscsiadm -m node -p 127.0.0.1 -T $TARGET_IQN -o new
  sudo iscsiadm -m node -p 127.0.0.1 -T $TARGET_IQN --login

  # Get the list of disks from the iSCSI session, and stash it in an array
  eval "DISKS=\$(sudo iscsiadm -m session -P3 | awk '/Attached scsi disk/ {print \$4}')"

  # Print the list
  echo $DISKS

  # Note that there are two disks found already (the two LUNs we created
  # above) despite the fact that we only just logged in.

  # Now delete a LUN from the target
  sudo targetcli /iscsi/$TARGET_IQN/tpg1/luns delete lun2
  sudo targetcli /backstores/fileio delete lun2

  # Attempt to read each of the disks
  for DISK in $DISKS ; do sudo blkid /dev/$DISK || true ; done

  # Look at the kernel log
  dmesg

  # Notice I/O errors related to the disk that the kernel remembers

  ################

  # Now to demostrate how this problem is fixed, I create a new Ubuntu
  20.04.0 VM

  # Add PPA with modified version of open-iscsi
  sudo add-apt-repository -y ppa:bswartz/open-iscsi
  sudo apt-get update

  # Install both iSCSI initiator and target on this host
  sudo apt-get -y install open-iscsi targetcli-fb

  # Start the services
  sudo systemctl start iscsid.service targetclid.service

  # Set the scan option to "manual"
  sudo sed -i 's/^\(node.session.scan\).*/\1 = manual/' /etc/iscsi/iscsid.conf
  sudo systemctl restart iscsid.service

  # Create a randomly generated target IQN
  TARGET_IQN=$(iscsi-iname)

  # Get the initator IQN
  INITIATOR_IQN=$(sudo awk -F = '/InitiatorName=/ {print $2}' /etc/iscsi/initiatorname.iscsi)

  # Set up an iSCSI target and target portal, and grant access to ourselves
  sudo targetcli /iscsi create $TARGET_IQN
  sudo targetcli /iscsi/$TARGET_IQN/tpg1/acls create $INITIATOR_IQN

  # Create two 1GiB LUNs backed by files, and expose them through the target portal
  sudo targetcli /backstores/fileio create lun1 /lun1 1G
  sudo targetcli /iscsi/$TARGET_IQN/tpg1/luns create /backstores/fileio/lun1 1
  sudo targetcli /backstores/fileio create lun2 /lun2 1G
  sudo targetcli /iscsi/$TARGET_IQN/tpg1/luns create /backstores/fileio/lun2 2

  # Truncate the kernel log so we can see messages after this point only
  sudo dmesg -C

  # Register the local iSCSI target with out initiator, and login
  sudo iscsiadm -m node -p 127.0.0.1 -T $TARGET_IQN -o new
  sudo iscsiadm -m node -p 127.0.0.1 -T $TARGET_IQN --login

  # Get the list of disks from the iSCSI session, and stash it in an array
  eval "DISKS=\$(sudo iscsiadm -m session -P3 | awk '/Attached scsi disk/ {print \$4}')"

  # Print the list
  echo $DISKS

  # Note that the list is empty!

  # Get the iSCSI host
  SCSI_HOST=$(ls /sys/class/iscsi_host)

  # Specifically scan the one disk we want
  sudo sh -c "echo '0 0 1' > /sys/class/scsi_host/$SCSI_HOST/scan"

  # Get the list of disks from the iSCSI session, and stash it in an array
  eval "DISKS=\$(sudo iscsiadm -m session -P3 | awk '/Attached scsi disk/ {print \$4}')"

  # Print the list
  echo $DISKS

  # This time notice there's exactly one disk

  # Now delete the other LUN from the target
  sudo targetcli /iscsi/$TARGET_IQN/tpg1/luns delete lun2
  sudo targetcli /backstores/fileio delete lun2

  # Attempt to read each of the disks
  for DISK in $DISKS ; do sudo blkid /dev/$DISK || true ; done

  # Look at the kernel log
  dmesg

  # No errors in the log

  ################

  [Regression Potential]

  These changes have been proven safe by 3 years of soak time in the
  RedHat ecosystem, so I don't see much risk to taking them into Ubuntu.
  They apply cleanly to the most recent versions of focal, bionic, and
  xenial.

  The change introduces a new config option in iscsid.conf but the default is to do exactly what it used to do. Only users who explicitly change this option will get altered behavior, and the behavior with the option set is
  superior for the above mentioned cloud use cases.

  [Other Info]

  RedHat discovered this problem more than 3 years ago and fixed it
  upstream.

  https://bugzilla.redhat.com/show_bug.cgi?id=1422941

  I had hoped that Debian would eventually pick up the version in which
  it was fixed, but another LTS has gone by without picking up the newer
  upstream version, and this is a critical problem, so I propose
  backporting the fixes.

  The 2 patches that need porting are:
  https://github.com/open-iscsi/open-iscsi/pull/40
  https://github.com/open-iscsi/open-iscsi/pull/49

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/open-iscsi/+bug/1877617/+subscriptions