[Bug 1014460] [NEW] Touchpad sometimes not working upon system startup

[Launchpad Bug Tracker]

You have been subscribed to a public bug by Sebastien Bacher (seb128):

This happens very infrequently. The symptom is touchpad not working
after boot up unless a reboot is made, or a manual "modprobe psmouse" is
performed on the command line. Movement or click activities on the
touchpad during system startup will increase the chance of happening of
this issue.

The root cause is a race condition upon system startup, that the serio1
device (i.e. the AUX port) could be temporarily binded to the keyboard
driver, and thus udev rule will ignore the event by not loading psmouse
at all. A detailed explanation of the theory is as follows:

1. serio ports (e.g. AUX port for touchpad) are different than other devices that:
   - the kernel is using a dedicated kernel thread kseriod to handle the events
   - interrupts on serio port will trigger connect attempt, as the OS has no idea when a keyboard/mouse could be plugged into the computer

2. The AT keyboard driver atkbd.c is built-in to the kernel for speed up
as there will be normally an AT keyboard present, however, as on a
normal PC, the keyboard can be connected to either the keyboard PS/2
port (i.e. KBD port), or the mouse PS/2 port (i.e. AUX port), the atkbd
driver will be probed each time an interrupt is generated on the AUX
port, in case there is a plug

3. When doing the probing, the serio1 device will be temporarily binded
with atkbd, and this is in the context of kseriod

4. udev has the chance of being launched at the same time, the time that
udev is launched, there will be a trigger to replay all uevents

5. that trigger will request uevents to be generated from the kernel,
and if serio1 happens to be in the middle of a probing (most likely with
atkbd), the uevent generated will have DRIVER=atkbd with it

6. psmouse is being built as a module, udev is following the rule below
to load psmouse ondemand:

  /lib/udev/rules.d/80-drivers.rules:
  ...
  DRIVER!="?*", ENV{MODALIAS}=="?*", RUN+="/sbin/modprobe -bv $env{MODALIAS}"

7. So if uevent for serio1 happens to be with DRIVER entry, this rule
will _not_ be performed as DRIVER!="?*" is _not_ matched, thus modprobe
will not load psmouse on demand

8. One simple fix is to add one additional rule to 80-drivers.rules, so
that serio events are treated special that modprobe will anyway be
performed, e.g.

  SUBSYSTEM=="serio", ENV{MODALIAS}=="?*", RUN+="/sbin/modprobe -bv
$env{MODALIAS}"

** Affects: udev (Ubuntu)
     Importance: Undecided
         Status: New


** Tags: blocks-hwcert-enablement patch
-- 
Touchpad sometimes not working upon system startup
https://bugs.launchpad.net/bugs/1014460
You received this bug notification because you are a member of Ubuntu Sponsors Team, which is subscribed to the bug report.