[Bug 116929] [NEW] cannot adjust headset volume with keyboard or headset
Launchpad Bug Tracker
116929 at bugs.launchpad.net
Thu Feb 17 09:40:28 UTC 2011
You have been subscribed to a public bug by Daniel Holbach (dholbach):
The controls on my headset and keyboard control some sort of volume dial (a graphic pops up for this) and both control the
volume that comes out of the speakers (my monitor speakers) but it does not affect the volume coming out of my headset
(which is connected in one of the USB ports).
Under "Volume Control => Change Device to Headset" I can manually change the volume setting of my headset and
this succesfully changes the sound level I hear with the headeset. Conversely, when I check the volume level in
Volume Control (the window you get when you right-click on the sound icon on the top right of the screen) I can see that
this goes up in down along with adjusting volume with the keyboard/headset-controls but when I change device to
my headset, the volume bar for this does not go up or down when I use the keyboard or headset controls for adjusting
volume.
In "System=>Preferences=>Sound" (which is the same as gnome-sound-properties) the top-level menu options are "Devices", "Sounds" and "System Beep". At the bottom of the "Devices" window it says,
"Select the device and tracks to control with the keyboard. Use the Shift and Control keys to select multiple tracks if required."
I select Bass, Treble & PCM for my Plantronics Headset, but again, this does not make a difference.
To do these test I'm running Skype and both Skype and System->Preferences->Sound are set to ALSA. Also note that
when playing videos on YouTube the audio is only coming out of my monitor speakers and not my headset (which is
what I would like) and when I'm using Skype the audio is set to only come out the headset and not my monitor speakers
(again, this is my preferred setting).
I am using a fresh install of Ubuntu 7.04 (Feisty) on a Shuttle SD39P2
box.
Here's the asked for output for sound bugs:
:~$ tail -2 /proc/asound/oss/sndstat
0: Realtek ALC888
1: USB Mixer
:~$ amixer
Simple mixer control 'Headphone',0
Capabilities: pswitch
Playback channels: Front Left - Front Right
Mono:
Front Left: Playback [on]
Front Right: Playback [on]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 102 [40%] [-30.60dB]
Front Right: Playback 102 [40%] [-30.60dB]
Simple mixer control 'Front',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 25 [81%] [-9.00dB] [on]
Front Right: Playback 25 [81%] [-9.00dB] [on]
Simple mixer control 'Front Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [on]
Front Right: Playback 0 [0%] [-34.50dB] [on]
Simple mixer control 'Surround',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-46.50dB] [on]
Front Right: Playback 0 [0%] [-46.50dB] [on]
Simple mixer control 'Center',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 0 [0%] [-46.50dB] [on]
Simple mixer control 'LFE',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 0 [0%] [-46.50dB] [on]
Simple mixer control 'Side',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-46.50dB] [on]
Front Right: Playback 0 [0%] [-46.50dB] [on]
Simple mixer control 'Line',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [on]
Front Right: Playback 0 [0%] [-34.50dB] [on]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined cswitch cswitch-joined
Playback channels: Mono
Capture channels: Mono
Mono: Playback [off] Capture [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 31
Front Left: Capture 0 [0%] [-16.50dB] [on]
Front Right: Capture 0 [0%] [-16.50dB] [on]
Simple mixer control 'Capture',1
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 31
Front Left: Capture 0 [0%] [-16.50dB] [on]
Front Right: Capture 0 [0%] [-16.50dB] [on]
Simple mixer control 'Input Source',0
Capabilities: enum
Items: 'Front Mic' 'Line'
Item0: 'Front Mic'
Simple mixer control 'Input Source',1
Capabilities: enum
Items: 'Front Mic' 'Line'
Item0: 'Front Mic'
:~$ lspci -nv
00:00.0 0600: 8086:277c (rev c0)
Subsystem: 1297:5104
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>
00:01.0 0604: 8086:277d (rev c0) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fa000000-fcffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Capabilities: <access denied>
00:1b.0 0403: 8086:27d8 (rev 01)
Subsystem: 1297:5104
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at fdff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
00:1c.0 0604: 8086:27d0 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff
Capabilities: <access denied>
00:1d.0 0c03: 8086:27c8 (rev 01) (prog-if 00 [UHCI])
Subsystem: 1297:5104
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at ff00 [size=32]
00:1d.1 0c03: 8086:27c9 (rev 01) (prog-if 00 [UHCI])
Subsystem: 1297:5104
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at fe00 [size=32]
00:1d.2 0c03: 8086:27ca (rev 01) (prog-if 00 [UHCI])
Subsystem: 1297:5104
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at fd00 [size=32]
00:1d.3 0c03: 8086:27cb (rev 01) (prog-if 00 [UHCI])
Subsystem: 1297:5104
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at fc00 [size=32]
00:1d.7 0c03: 8086:27cc (rev 01) (prog-if 20 [EHCI])
Subsystem: 1297:5104
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at fdfff000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1e.0 0604: 8086:244e (rev e1) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fdd00000-fddfffff
Prefetchable memory behind bridge: 00000000fdc00000-00000000fdcfffff
Capabilities: <access denied>
00:1f.0 0601: 8086:27b8 (rev 01)
Subsystem: 1297:5104
Flags: bus master, medium devsel, latency 0
Capabilities: <access denied>
00:1f.1 0101: 8086:27df (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: 1297:5104
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at fb00 [size=16]
00:1f.2 0101: 8086:27c0 (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: 1297:5104
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
I/O ports at fa00 [size=8]
I/O ports at f900 [size=4]
I/O ports at f800 [size=8]
I/O ports at f700 [size=4]
I/O ports at f600 [size=16]
Memory at fdffe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1f.3 0c05: 8086:27da (rev 01)
Subsystem: 1297:5104
Flags: medium devsel, IRQ 15
I/O ports at 0500 [size=32]
01:00.0 0300: 10de:0392 (rev a1) (prog-if 00 [VGA])
Subsystem: 1682:2221
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at fb000000 (64-bit, non-prefetchable) [size=16M]
I/O ports at cf00 [size=128]
[virtual] Expansion ROM at fc000000 [disabled] [size=128K]
Capabilities: <access denied>
02:00.0 0200: 14e4:169d (rev 21)
Subsystem: 1297:5065
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at fdef0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
03:0a.0 0c00: 1106:3044 (rev c0) (prog-if 10 [OHCI])
Subsystem: 1297:5065
Flags: bus master, medium devsel, latency 64, IRQ 18
Memory at fddff000 (32-bit, non-prefetchable) [size=2K]
I/O ports at df00 [size=128]
Capabilities: <access denied>
:~$ asoundconf list
Names of available sound cards:
Intel
Headset
:~$ cat /etc/asound.conf ~/.asoundrc*
cat: /etc/asound.conf: No such file or directory
cat: /home/hornby/.asoundrc*: No such file or directory
:~$ dmesg
[ 0.000000] Linux version 2.6.20-15-generic (root at yellow) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 06:17:24 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] Command line: root=UUID=87cd2b21-e912-4899-ba08-ac1df0d53ca4 ro quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfff0000 (usable)
[ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000cfff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfff3000 - 00000000d0000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 851952) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used
[ 0.000000] end_pfn_map = 1245184
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP (v000 Shuttl ) @ 0x00000000000f9270
[ 0.000000] ACPI: RSDT (v001 Shuttl Shuttle 0x42302e31 AWRD 0x00000000) @ 0x00000000cfff3040
[ 0.000000] ACPI: FADT (v001 Shuttl Shuttle 0x42302e31 AWRD 0x00000000) @ 0x00000000cfff30c0
[ 0.000000] ACPI: HPET (v001 Shuttl Shuttle 0x42302e31 AWRD 0x00000098) @ 0x00000000cfff7580
[ 0.000000] ACPI: MCFG (v001 Shuttl Shuttle 0x42302e31 AWRD 0x00000000) @ 0x00000000cfff7600
[ 0.000000] ACPI: SLIC (v001 Shuttl Shuttle 0x42302e31 AWRD 0x00000000) @ 0x00000000cfff7680
[ 0.000000] ACPI: MADT (v001 Shuttl Shuttle 0x42302e31 AWRD 0x00000000) @ 0x00000000cfff7480
[ 0.000000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20041203) @ 0x00000000cfff7e60
[ 0.000000] ACPI: DSDT (v001 SHUTTL SD39V10 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000130000000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 851952) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1245184
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 851952
[ 0.000000] 0: 1048576 -> 1245184
[ 0.000000] On node 0 totalpages: 1048463
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1103 pages reserved
[ 0.000000] DMA zone: 2840 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833576 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to physical flat
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000
[ 0.000000] Nosave address range: 00000000000a0000 - 00000000000f0000
[ 0.000000] Nosave address range: 00000000000f0000 - 0000000000100000
[ 0.000000] Nosave address range: 00000000cfff0000 - 00000000cfff3000
[ 0.000000] Nosave address range: 00000000cfff3000 - 00000000d0000000
[ 0.000000] Nosave address range: 00000000d0000000 - 00000000e0000000
[ 0.000000] Nosave address range: 00000000e0000000 - 00000000f0000000
[ 0.000000] Nosave address range: 00000000f0000000 - 00000000fec00000
[ 0.000000] Nosave address range: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 1030336
[ 0.000000] Kernel command line: root=UUID=87cd2b21-e912-4899-ba08-ac1df0d53ca4 ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 22.978039] Console: colour VGA+ 80x25
[ 22.980752] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 22.983661] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 22.983916] Checking aperture...
[ 22.983924] Calgary: detecting Calgary via BIOS EBDA area
[ 22.983926] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 22.983928] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 23.039169] Placing software IO TLB between 0x164c000 - 0x564c000
[ 23.086073] Memory: 4041680k/4980736k available (2217k kernel code, 152172k reserved, 1162k data, 304k init)
[ 23.163020] Calibrating delay using timer specific routine.. 4805.57 BogoMIPS (lpj=9611145)
[ 23.163069] Security Framework v1.0.0 initialized
[ 23.163074] SELinux: Disabled at boot.
[ 23.163095] Mount-cache hash table entries: 256
[ 23.163237] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 23.163239] CPU: L2 cache: 4096K
[ 23.163241] CPU 0/0 -> Node 0
[ 23.163242] using mwait in idle threads.
[ 23.163244] CPU: Physical Processor ID: 0
[ 23.163245] CPU: Processor Core ID: 0
[ 23.163251] CPU0: Thermal monitoring enabled (TM1)
[ 23.163260] SMP alternatives: switching to UP code
[ 23.163492] Early unpacking initramfs... done
[ 23.444657] ACPI: Core revision 20060707
[ 23.450243] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 23.499546] Using local APIC timer interrupts.
[ 23.541149] result 16671400
[ 23.541151] Detected 16.671 MHz APIC timer.
[ 23.542661] SMP alternatives: switching to SMP code
[ 23.542777] Booting processor 1/2 APIC 0x1
[ 23.554088] Initializing CPU#1
[ 23.630419] Calibrating delay using timer specific routine.. 4801.53 BogoMIPS (lpj=9603070)
[ 23.630425] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 23.630426] CPU: L2 cache: 4096K
[ 23.630428] CPU 1/1 -> Node 0
[ 23.630430] CPU: Physical Processor ID: 0
[ 23.630431] CPU: Processor Core ID: 1
[ 23.630435] CPU1: Thermal monitoring enabled (TM2)
[ 23.630844] Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
[ 23.634429] Brought up 2 CPUs
[ 23.634468] time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
[ 23.634470] time.c: Detected 2400.681 MHz processor.
[ 23.727002] migration_cost=31
[ 23.727264] Time: 17:22:33 Date: 04/25/107
[ 23.727291] NET: Registered protocol family 16
[ 23.727352] ACPI: bus type pci registered
[ 23.727358] PCI: Using configuration type 1
[ 23.736250] ACPI: Interpreter enabled
[ 23.736252] ACPI: Using IOAPIC for interrupt routing
[ 23.736670] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 23.736674] PCI: Probing PCI hardware (bus 00)
[ 23.737183] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 23.737186] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 23.737364] Boot video device is 0000:01:00.0
[ 23.737617] PCI: Transparent bridge - 0000:00:1e.0
[ 23.737654] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 23.745639] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 23.746288] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 23.748630] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 23.748823] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 23.749018] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 23.749212] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12 14 *15)
[ 23.749406] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 23.749598] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 23.749791] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 23.749985] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 23.750187] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 23.750194] pnp: PnP ACPI init
[ 23.752493] pnp: PnP ACPI: found 12 devices
[ 23.752529] PCI: Using ACPI for IRQ routing
[ 23.752531] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 23.752591] NET: Registered protocol family 8
[ 23.752593] NET: Registered protocol family 20
[ 23.752601] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 23.752604] hpet0: 3 64-bit timers, 14318180 Hz
[ 23.753612] PCI-GART: No AMD northbridge found.
[ 23.753892] pnp: 00:08: ioport range 0x400-0x4bf could not be reserved
[ 23.754124] PCI: Bridge: 0000:00:01.0
[ 23.754126] IO window: c000-cfff
[ 23.754129] MEM window: fa000000-fcffffff
[ 23.754131] PREFETCH window: d0000000-dfffffff
[ 23.754134] PCI: Bridge: 0000:00:1c.0
[ 23.754136] IO window: e000-efff
[ 23.754139] MEM window: fde00000-fdefffff
[ 23.754142] PREFETCH window: fdb00000-fdbfffff
[ 23.754146] PCI: Bridge: 0000:00:1e.0
[ 23.754148] IO window: d000-dfff
[ 23.754152] MEM window: fdd00000-fddfffff
[ 23.754155] PREFETCH window: fdc00000-fdcfffff
[ 23.754165] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 23.754169] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 23.754181] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 23.754185] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 23.754193] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 23.754220] NET: Registered protocol family 2
[ 23.790253] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 23.790474] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 23.792349] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 23.792921] TCP: Hash tables configured (established 262144 bind 65536)
[ 23.792923] TCP reno registered
[ 23.806337] checking if image is initramfs... it is
[ 24.355749] Freeing initrd memory: 7306k freed
[ 24.359302] audit: initializing netlink socket (disabled)
[ 24.359321] audit(1180113753.348:1): initialized
[ 24.359472] VFS: Disk quotas dquot_6.5.1
[ 24.359490] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 24.359535] io scheduler noop registered
[ 24.359537] io scheduler anticipatory registered
[ 24.359539] io scheduler deadline registered
[ 24.359549] io scheduler cfq registered (default)
[ 32.351174] 0000:00:1d.7 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
[ 32.351311] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 32.351335] assign_interrupt_mode Found MSI capability
[ 32.351338] Allocate Port Service[0000:00:01.0:pcie00]
[ 32.351403] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 32.351435] assign_interrupt_mode Found MSI capability
[ 32.351436] Allocate Port Service[0000:00:1c.0:pcie00]
[ 32.351460] Allocate Port Service[0000:00:1c.0:pcie02]
[ 32.368172] Real Time Clock Driver v1.12ac
[ 32.368299] hpet_resources: 0xfed00000 is busy
[ 32.368315] Linux agpgart interface v0.102 (c) Dave Jones
[ 32.368317] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 32.368727] mice: PS/2 mouse device common for all mice
[ 32.369171] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 32.369288] input: Macintosh mouse button emulation as /class/input/input0
[ 32.369314] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 32.369317] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 32.369508] PNP: No PS/2 controller found. Probing ports directly.
[ 32.370359] i8042.c: No controller found.
[ 32.370430] TCP cubic registered
[ 32.370437] NET: Registered protocol family 1
[ 32.370498] ACPI: (supports S0 S1 S4 S5)
[ 32.370532] Magic number: 7:498:391
[ 32.370621] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 32.370692] Freeing unused kernel memory: 304k freed
[ 33.493918] Capability LSM initialized
[ 33.517141] ACPI: Fan [FAN] (on)
[ 33.519616] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
[ 33.519844] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
[ 33.519875] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 33.519879] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 33.520656] ACPI: Thermal Zone [THRM] (-73 C)
[ 33.745211] usbcore: registered new interface driver usbfs
[ 33.745227] usbcore: registered new interface driver hub
[ 33.758722] SCSI subsystem initialized
[ 33.761910] libata version 2.20 loaded.
[ 33.763796] ata_piix 0000:00:1f.1: version 2.10ac1
[ 33.763812] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 33.763826] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 33.763856] ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001fb00 irq 14
[ 33.763888] usbcore: registered new device driver usb
[ 33.769465] ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001fb08 irq 15
[ 33.769489] scsi0 : ata_piix
[ 33.769656] USB Universal Host Controller Interface driver v3.0
[ 33.796014] ieee1394: Initialized config rom entry `ip1394'
[ 33.805858] Floppy drive(s): fd0 is 1.44M
[ 33.828888] FDC 0 is a post-1991 82077
[ 33.940466] ATA: abnormal status 0x7F on port 0x00000000000101f7
[ 33.940482] scsi1 : ata_piix
[ 33.940535] ata2: port disabled. ignoring.
[ 33.940789] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 33.940811] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 33.940826] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 33.940848] ata3: SATA max UDMA/133 cmd 0x000000000001fa00 ctl 0x000000000001f902 bmdma 0x000000000001f600 irq 19
[ 33.940865] ata4: SATA max UDMA/133 cmd 0x000000000001f800 ctl 0x000000000001f702 bmdma 0x000000000001f608 irq 19
[ 33.940874] scsi2 : ata_piix
[ 34.330147] ata3.00: ata_hpa_resize 1: sectors = 976773168, hpa_sectors = 976773168
[ 34.330150] ata3.00: ATA-7: ST3500630AS, 3.AAE, max UDMA/133
[ 34.330152] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 34.330155] ata3.01: ATAPI, max UDMA/100
[ 34.396693] ata3.00: ata_hpa_resize 1: sectors = 976773168, hpa_sectors = 976773168
[ 34.396696] ata3.00: configured for UDMA/133
[ 34.580468] ata3.01: configured for UDMA/100
[ 34.580471] scsi3 : ata_piix
[ 34.750772] ATA: abnormal status 0x7F on port 0x000000000001f807
[ 34.750854] scsi 2:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5
[ 34.752080] scsi 2:0:1:0: CD-ROM LITE-ON DVDRW LH-20A1S 9L05 PQ: 0 ANSI: 5
[ 34.752327] tg3.c:v3.72 (January 8, 2007)
[ 34.752341] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 34.752348] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 34.761009] SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
[ 34.762242] sda: Write Protect is off
[ 34.762244] sda: Mode Sense: 00 3a 00 00
[ 34.764723] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 34.766343] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 34.766345] Uniform CD-ROM driver Revision: 3.20
[ 34.766369] sr 2:0:1:0: Attached scsi CD-ROM sr0
[ 34.766419] SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
[ 34.766427] sda: Write Protect is off
[ 34.766428] sda: Mode Sense: 00 3a 00 00
[ 34.766439] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 34.766443] sda:<5>sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 34.768592] sr 2:0:1:0: Attached scsi generic sg1 type 5
[ 34.785711] sda1 sda2 sda3
[ 34.798296] sd 2:0:0:0: Attached scsi disk sda
[ 34.801487] eth0: Tigon3 [partno(BCM95789) rev 4201 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:30:1b:43:cc:8b
[ 34.801492] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
[ 34.801494] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 34.801520] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 34.801531] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 34.801534] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 34.801640] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 34.801664] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff00
[ 34.801777] usb usb1: configuration #1 chosen from 1 choice
[ 34.801797] hub 1-0:1.0: USB hub found
[ 34.801801] hub 1-0:1.0: 2 ports detected
[ 34.907977] ACPI: PCI Interrupt 0000:00:1d.1[B] -> <6>ACPI: PCI Interrupt 0000:03:0a.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 34.907983] GSI 19 (level, low) -> IRQ 19
[ 34.907985] PCI: Setting latency timer of device 0000:03:0a.0 to 64
[ 34.907991] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 34.907995] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 34.908014] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 34.908040] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fe00
[ 34.908107] usb usb2: configuration #1 chosen from 1 choice
[ 34.908124] hub 2-0:1.0: USB hub found
[ 34.908128] hub 2-0:1.0: 2 ports detected
[ 34.961063] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[18] MMIO=[fddff000-fddff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 34.998085] Attempting manual resume
[ 34.998087] swsusp: Resume From Partition 8:2
[ 34.998089] PM: Checking swsusp image.
[ 34.998325] PM: Resume from disk failed.
[ 35.015831] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 35.015840] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 35.015843] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 35.015858] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 35.015879] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fd00
[ 35.015945] usb usb3: configuration #1 chosen from 1 choice
[ 35.015963] hub 3-0:1.0: USB hub found
[ 35.015967] hub 3-0:1.0: 2 ports detected
[ 35.018891] kjournald starting. Commit interval 5 seconds
[ 35.018899] EXT3-fs: mounted filesystem with ordered data mode.
[ 35.123677] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 35.123685] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 35.123688] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 35.123704] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 35.123727] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00
[ 35.123795] usb usb4: configuration #1 chosen from 1 choice
[ 35.123812] hub 4-0:1.0: USB hub found
[ 35.123816] hub 4-0:1.0: 2 ports detected
[ 35.231671] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 35.231685] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 35.231688] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 35.231708] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 35.231739] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 35.231745] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
[ 35.235623] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 35.235673] usb usb5: configuration #1 chosen from 1 choice
[ 35.235690] hub 5-0:1.0: USB hub found
[ 35.235696] hub 5-0:1.0: 8 ports detected
[ 35.255430] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 36.138292] usb 5-5: new high speed USB device using ehci_hcd and address 3
[ 36.242258] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000000301b43ee73]
[ 36.274531] usb 5-5: configuration #1 chosen from 1 choice
[ 36.274622] hub 5-5:1.0: USB hub found
[ 36.274730] hub 5-5:1.0: 4 ports detected
[ 36.989193] usb 4-1: new low speed USB device using uhci_hcd and address 2
[ 37.179259] usb 4-1: configuration #1 chosen from 1 choice
[ 37.424633] usb 4-2: new low speed USB device using uhci_hcd and address 3
[ 37.614746] usb 4-2: configuration #1 chosen from 1 choice
[ 37.860087] usb 2-1: new full speed USB device using uhci_hcd and address 3
[ 38.099171] usb 2-1: configuration #1 chosen from 1 choice
[ 42.051637] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 42.065353] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 42.114405] input: PC Speaker as /class/input/input1
[ 42.143020] intel_rng: FWH not detected
[ 42.296586] usbcore: registered new interface driver hiddev
[ 42.377589] iTCO_vendor_support: vendor-support=0
[ 42.378408] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 42.378464] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
[ 42.378487] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 42.408558] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input2
[ 42.408598] input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.3-1
[ 42.440075] nvidia: module license 'NVIDIA' taints kernel.
[ 42.701215] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 42.701223] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 42.701266] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 1.0-9755 Mon Feb 26 23:16:31 PST 2007
[ 42.741895] NET: Registered protocol family 17
[ 42.742928] input: Microsoft Natural Ergonomic Keyboard 4000 as /class/input/input3
[ 42.742964] input: USB HID v1.11 Keyboard [Microsoft Natural Ergonomic Keyboard 4000] on usb-0000:00:1d.3-2
[ 42.764895] input: Microsoft Natural Ergonomic Keyboard 4000 as /class/input/input4
[ 42.764929] input: USB HID v1.11 Device [Microsoft Natural Ergonomic Keyboard 4000] on usb-0000:00:1d.3-2
[ 42.785529] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 42.785544] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 42.859694] input: Plantronics Plantronics Headset as /class/input/input5
[ 42.859731] input: USB HID v1.00 Device [Plantronics Plantronics Headset] on usb-0000:00:1d.1-1
[ 42.859744] usbcore: registered new interface driver usbhid
[ 42.859746] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 42.950795] usbcore: registered new interface driver snd-usb-audio
[ 42.950879] usbcore: registered new interface driver xpad
[ 42.950881] drivers/usb/input/xpad.c: driver for Xbox controllers v0.1.6
[ 42.993454] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 43.010672] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 43.010674] tg3: eth0: Flow control is on for TX and on for RX.
[ 43.200184] fuse init (API version 7.8)
[ 43.253051] lp: driver loaded but no devices found
[ 43.305499] Adding 2048276k swap on /dev/disk/by-uuid/b806dfc2-9159-461e-b501-95a94b8f5dc8. Priority:-1 extents:1 across:2048276k
[ 43.412793] EXT3 FS on sda1, internal journal
[ 43.618513] kjournald starting. Commit interval 5 seconds
[ 43.618705] EXT3 FS on sda3, internal journal
[ 43.618709] EXT3-fs: mounted filesystem with ordered data mode.
[ 49.721140] input: Power Button (FF) as /class/input/input6
[ 49.721159] ACPI: Power Button (FF) [PWRF]
[ 49.721186] input: Power Button (CM) as /class/input/input7
[ 49.721199] ACPI: Power Button (CM) [PWRB]
[ 49.760084] No dock devices found.
[ 49.785554] ibm_acpi: ec object not found
[ 49.876720] Using specific hotkey driver
[ 49.946530] pcc_acpi: loading...
[ 54.049410] ppdev: user-space parallel port driver
[ 54.770673] Bluetooth: Core ver 2.11
[ 54.770729] NET: Registered protocol family 31
[ 54.770730] Bluetooth: HCI device and connection manager initialized
[ 54.770733] Bluetooth: HCI socket layer initialized
[ 54.787581] Bluetooth: L2CAP ver 2.8
[ 54.787586] Bluetooth: L2CAP socket layer initialized
[ 54.922698] Bluetooth: RFCOMM socket layer initialized
[ 54.922711] Bluetooth: RFCOMM TTY layer initialized
[ 54.922713] Bluetooth: RFCOMM ver 1.8
:~$ cat /proc/interrupts
CPU0 CPU1
0: 4744870 0 IO-APIC-edge timer
6: 5 0 IO-APIC-edge floppy
8: 0 0 IO-APIC-edge rtc
9: 0 0 IO-APIC-fasteoi acpi
14: 0 0 IO-APIC-edge libata
15: 0 0 IO-APIC-edge libata
16: 2339565 0 IO-APIC-fasteoi uhci_hcd:usb4, eth0, HDA Intel, nvidia
18: 3 0 IO-APIC-fasteoi ohci1394, uhci_hcd:usb3
19: 847772 0 IO-APIC-fasteoi libata, uhci_hcd:usb2
23: 37 0 IO-APIC-fasteoi uhci_hcd:usb1, ehci_hcd:usb5
NMI: 0 0
LOC: 4744753 4744736
ERR: 0
:~$ amixer -c 1
Simple mixer control 'Bass',0
Capabilities: volume volume-joined
Playback channels: Mono
Capture channels: Mono
Limits: 0 - 48
Mono: 24 [50%]
Simple mixer control 'Bass Boost',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Treble',0
Capabilities: volume volume-joined
Playback channels: Mono
Capture channels: Mono
Limits: 0 - 48
Mono: 24 [50%]
Simple mixer control 'PCM',0
Capabilities: pvolume pswitch pswitch-joined
Playback channels: Front Left - Front Right
Limits: Playback 0 - 704
Mono:
Front Left: Playback 227 [32%] [-27.38dB] [on]
Front Right: Playback 227 [32%] [-27.38dB] [on]
Simple mixer control 'Mic',0
Capabilities: cvolume cswitch cswitch-joined
Capture channels: Mono
Limits: Capture 0 - 15
Mono: Capture 15 [100%] [31.00dB] [off]
Simple mixer control 'Auto Gain Control',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
** Affects: gnome-control-center
Importance: Medium
Status: Fix Released
** Affects: control-center (Ubuntu)
Importance: Low
Assignee: Ubuntu Desktop Bugs (desktop-bugs)
Status: Fix Released
** Tags: patch
--
cannot adjust headset volume with keyboard or headset
https://bugs.launchpad.net/bugs/116929
You received this bug notification because you are a member of Ubuntu Sponsors Team, which is a direct subscriber.
More information about the Ubuntu-sponsors
mailing list