Call for Testing: Ubuntu Server Quantal
George Dunlap
dunlapg at umich.edu
Fri Sep 21 10:22:43 UTC 2012
On Fri, Sep 21, 2012 at 12:16 AM, Clint Byrum <clint at ubuntu.com> wrote:
> Excerpts from George Dunlap's message of 2012-09-20 09:45:28 -0700:
>> I just spent 10 minutes trying to figure out how to *actually report a
>> bug* on launchpad, and I give up.
>>
>
> Hi George. There are two easy ways. If you are reporting a bug on a running
> system, just run
>
> ubuntu-bug [package name]
>
> The package name is optional, but highly recommended so that apport knows
> what extra info to attach.
>
> Since you are reporting installer errors that might be hard to do, so go here:
>
> https://launchpad.net/ubuntu
>
> And click "report a bug" on the right side.
...that takes me to this wiki page, which proved singularly unhelpful
in my circumstances:
https://help.ubuntu.com/community/ReportingBugs
Perhaps there's been a mistake, or perhaps some overly-zealous person
has decided that all bug reports need to come through "ubuntu-bug" or
something like that?
>> The netboot images for amd64 appear to be broken -- they don't work on
>> either of my two test boxes (one an AMD, one an Intel). The AMD
>> hangs, the Intel reboots. Below is the config I'm using:
>>
>> label ubuntu-quantal-amd64
>> kernel ubuntu-quantal-amd64/linux
>> append vga=normal initrd=ubuntu-quantal-amd64/initrd.gz -- quiet
>>
>> The files in question were just downloaded today:
>>
>> -rw-r--r-- 1 mikemc xendev 9306616 Sep 20 16:39 initrd.gz
>> -rw-r--r-- 1 mikemc xendev 5127712 Sep 20 16:39 linux
>
>
> Can you give more information on the details of your hardware so others can
> try to reproduce?
I wasn't sure what information would be helpful, and since it's failed
on two completely different kinds of processors, I figured it should
be easy to reproduce. Has anyone gotten it to work?
In any case, attached are the out put of "cpuid" and "dmesg" for my
AMD and Intel boxes when booted on the existing installations.
Unfortunately there's no serial output.
Thanks,
-George
-------------- next part --------------
processor : 0
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : AMD Engineering Sample
stepping : 0
microcode : 0x1000067
cpu MHz : 1995.071
cache size : 512 KB
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu de tsc msr pae cx8 apic cmov pat clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni cx16 popcnt hypervisor lahf_lm cmp_legacy extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch
bogomips : 3990.14
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
processor : 1
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : AMD Engineering Sample
stepping : 0
microcode : 0x1000067
cpu MHz : 1995.071
cache size : 512 KB
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu de tsc msr pae cx8 apic cmov pat clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni cx16 popcnt hypervisor lahf_lm cmp_legacy extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch
bogomips : 3990.14
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
processor : 2
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : AMD Engineering Sample
stepping : 0
microcode : 0x1000067
cpu MHz : 1995.071
cache size : 512 KB
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu de tsc msr pae cx8 apic cmov pat clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni cx16 popcnt hypervisor lahf_lm cmp_legacy extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch
bogomips : 3990.14
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
processor : 3
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : AMD Engineering Sample
stepping : 0
microcode : 0x1000067
cpu MHz : 1995.071
cache size : 512 KB
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu de tsc msr pae cx8 apic cmov pat clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni cx16 popcnt hypervisor lahf_lm cmp_legacy extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch
bogomips : 3990.14
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
processor : 4
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : AMD Engineering Sample
stepping : 0
microcode : 0x1000067
cpu MHz : 1995.071
cache size : 512 KB
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu de tsc msr pae cx8 apic cmov pat clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni cx16 popcnt hypervisor lahf_lm cmp_legacy extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch
bogomips : 3990.14
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
processor : 5
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : AMD Engineering Sample
stepping : 0
microcode : 0x1000067
cpu MHz : 1995.071
cache size : 512 KB
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu de tsc msr pae cx8 apic cmov pat clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni cx16 popcnt hypervisor lahf_lm cmp_legacy extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch
bogomips : 3990.14
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
processor : 6
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : AMD Engineering Sample
stepping : 0
microcode : 0x1000067
cpu MHz : 1995.071
cache size : 512 KB
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu de tsc msr pae cx8 apic cmov pat clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni cx16 popcnt hypervisor lahf_lm cmp_legacy extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch
bogomips : 3990.14
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
processor : 7
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : AMD Engineering Sample
stepping : 0
microcode : 0x1000067
cpu MHz : 1995.071
cache size : 512 KB
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu de tsc msr pae cx8 apic cmov pat clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni cx16 popcnt hypervisor lahf_lm cmp_legacy extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch
bogomips : 3990.14
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-26-generic (buildd at batsu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012 (Ubuntu 3.2.0-26.41-generic 3.2.19)
[ 0.000000] Command line: placeholder root=/dev/mapper/exile-root ro console=hvc0 earlyprintk=xen nomodeset
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Freeing 9c-100 pfn range: 100 pages freed
[ 0.000000] 1-1 mapping on 9c->100
[ 0.000000] Freeing cfee0-f4a8d pfn range: 150445 pages freed
[ 0.000000] 1-1 mapping on cfee0->100000
[ 0.000000] Released 150545 pages of unused memory
[ 0.000000] Set 196996 page(s) to 1-1 mapping
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009c000 (usable)
[ 0.000000] Xen: 000000000009c400 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 00000000cfee0000 (usable)
[ 0.000000] Xen: 00000000cfee0000 - 00000000cfee5000 (ACPI data)
[ 0.000000] Xen: 00000000cfee5000 - 00000000cfef1000 (ACPI NVS)
[ 0.000000] Xen: 00000000cfef1000 - 00000000d0000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec03000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] Xen: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: empty empty/S3993, BIOS EXPA-DR0024 05-14-2008 : AGESA 3.1.8.0 Deerhound 05/15/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f80b0] f80b0
[ 0.000000] initial memory mapped : 0 - 0478f000
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfee0000
[ 0.000000] 0000000000 - 00cfee0000 page 4k
[ 0.000000] kernel direct mapping tables up to cfee0000 @ 97b000-1000000
[ 0.000000] xen: setting RW the range fd2000 - 1000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[ 0.000000] 0100000000 - 0130000000 page 4k
[ 0.000000] kernel direct mapping tables up to 130000000 @ cf55a000-cfee0000
[ 0.000000] xen: setting RW the range cf6db000 - cfee0000
[ 0.000000] RAMDISK: 0205f000 - 0478f000
[ 0.000000] ACPI: RSDP 00000000000f8080 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 00000000cfee01fe 0005C (v01 BRCM EXPLOSN 06040000 PTL 02000001)
[ 0.000000] ACPI: FACP 00000000cfee02ce 000F4 (v03 BRCM EXPLOSN 06040000 MSFT 02000001)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0xC (20110623/tbfadt-560)
[ 0.000000] ACPI: DSDT 00000000cfee03c2 04949 (v02 BRCM EXPLOSN 06040000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000cfef0fc0 00040
[ 0.000000] ACPI: TCPA 00000000cfee4d0b 00032 (v01 BRCM EXPLOSN 06040000 PTL 20000001)
[ 0.000000] ACPI: SRAT 00000000cfee4d3d 00128 (v01 AMD FAM_F_10 06040000 AMD 00000001)
[ 0.000000] ACPI: HPET 00000000cfee4e65 00038 (v01 BRCM EXPLOSN 06040000 BRCM 02000001)
[ 0.000000] ACPI: SSDT 00000000cfee4e9d 00049 (v01 BRCM PRT0 06040000 BRCM 02000001)
[ 0.000000] ACPI: SPCR 00000000cfee4ee6 00050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001)
[ 0.000000] ACPI: APIC 00000000cfee4f36 000CA (v01 BRCM EXPLOSN 06040000 PTL 02000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] Number of physical nodes 2
[ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000130000000
[ 0.000000] Skipping disabled node 1
[ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [00000000cfedb000 - 00000000cfedffff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009c
[ 0.000000] 0: 0x00000100 -> 0x000cfee0
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1048172
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 1628 pages reserved
[ 0.000000] DMA zone: 2288 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 831264 pages, LIFO batch:31
[ 0.000000] Normal zone: 3072 pages used for memmap
[ 0.000000] Normal zone: 193536 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 255, address 0xfec00000, GSI 0-255
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[16])
[ 0.000000] IOAPIC[1]: apic_id 9, version 255, address 0xfec01000, GSI 16-271
[ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec02000] gsi_base[32])
[ 0.000000] IOAPIC[2]: apic_id 10, version 255, address 0xfec02000, GSI 32-287
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x1166a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 304
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee5000
[ 0.000000] PM: Registered nosave memory: 00000000cfee5000 - 00000000cfef1000
[ 0.000000] PM: Registered nosave memory: 00000000cfef1000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec03000
[ 0.000000] PM: Registered nosave memory: 00000000fec03000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000
[ 0.000000] PM: Registered nosave memory: 00000000fff80000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.2.0-rc2 (preserve-AD)
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800cfc00000 s83072 r8192 d23424 u262144
[ 0.000000] pcpu-alloc: s83072 r8192 d23424 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027088
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: placeholder root=/dev/mapper/exile-root ro console=hvc0 earlyprintk=xen nomodeset
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Placing 64MB software IO TLB between ffff8800c7000000 - ffff8800cb000000
[ 0.000000] software IO TLB at phys 0xc7000000 - 0xcb000000
[ 0.000000] Memory: 3201556k/4980736k available (6555k kernel code, 788048k absent, 991132k reserved, 6645k data, 920k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:2048 16
[ 0.000000] xen: sci override: global_irq=9 trigger=0 polarity=1
[ 0.000000] xen: registering gsi 9 triggering 0 polarity 1
[ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9)
[ 0.000000] xen: acpi sci 9
[ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1)
[ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2)
[ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3)
[ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4)
[ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5)
[ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6)
[ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7)
[ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8)
[ 0.000000] xen: --> pirq=10 -> irq=10 (gsi=10)
[ 0.000000] xen: --> pirq=11 -> irq=11 (gsi=11)
[ 0.000000] xen: --> pirq=12 -> irq=12 (gsi=12)
[ 0.000000] xen: --> pirq=13 -> irq=13 (gsi=13)
[ 0.000000] xen: --> pirq=14 -> irq=14 (gsi=14)
[ 0.000000] xen: --> pirq=15 -> irq=15 (gsi=15)
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [hvc0] enabled, bootconsole disabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Xen: using vcpuop timer interface
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] Detected 1995.071 MHz processor.
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.14 BogoMIPS (lpj=7980284)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] Security Framework initialized
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Yama: becoming mindful.
[ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.006796] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.007819] Mount-cache hash table entries: 256
[ 0.008092] Initializing cgroup subsys cpuacct
[ 0.008107] Initializing cgroup subsys memory
[ 0.008137] Initializing cgroup subsys devices
[ 0.008145] Initializing cgroup subsys freezer
[ 0.008152] Initializing cgroup subsys blkio
[ 0.008173] Initializing cgroup subsys perf_event
[ 0.008282] tseg: 00cff80000
[ 0.008288] CPU: Physical Processor ID: 0
[ 0.008294] CPU: Processor Core ID: 0
[ 0.010776] ACPI: Core revision 20110623
[ 0.020103] ftrace: allocating 26991 entries in 106 pages
[ 0.024229] cpu 0 spinlock event irq 305
[ 0.024374] Performance Events: Broken PMU hardware detected, using software events only.
[ 0.024711] NMI watchdog disabled (cpu0): hardware events not enabled
[ 0.024893] installing Xen timer for CPU 1
[ 0.024923] cpu 1 spinlock event irq 311
[ 0.025407] NMI watchdog disabled (cpu1): hardware events not enabled
[ 0.025619] installing Xen timer for CPU 2
[ 0.025648] cpu 2 spinlock event irq 317
[ 0.026115] NMI watchdog disabled (cpu2): hardware events not enabled
[ 0.026315] installing Xen timer for CPU 3
[ 0.026344] cpu 3 spinlock event irq 323
[ 0.026801] NMI watchdog disabled (cpu3): hardware events not enabled
[ 0.027003] installing Xen timer for CPU 4
[ 0.027024] cpu 4 spinlock event irq 329
[ 0.027582] NMI watchdog disabled (cpu4): hardware events not enabled
[ 0.027806] installing Xen timer for CPU 5
[ 0.027828] cpu 5 spinlock event irq 335
[ 0.028287] NMI watchdog disabled (cpu5): hardware events not enabled
[ 0.028490] installing Xen timer for CPU 6
[ 0.028511] cpu 6 spinlock event irq 341
[ 0.029071] NMI watchdog disabled (cpu6): hardware events not enabled
[ 0.029291] installing Xen timer for CPU 7
[ 0.029314] cpu 7 spinlock event irq 347
[ 0.029885] NMI watchdog disabled (cpu7): hardware events not enabled
[ 0.029976] Brought up 8 CPUs
[ 0.030330] devtmpfs: initialized
[ 0.032681] EVM: security.selinux
[ 0.032687] EVM: security.SMACK64
[ 0.032691] EVM: security.capability
[ 0.032774] PM: Registering ACPI NVS region at cfee5000 (49152 bytes)
[ 0.033238] Grant table initialized
[ 0.033344] print_constraints: dummy:
[ 0.053780] RTC time: 10:01:32, date: 09/21/12
[ 0.053852] NET: Registered protocol family 16
[ 0.054067] Trying to unpack rootfs image as initramfs...
[ 0.080355] node 0 link 2: io port [1000, 7fff]
[ 0.080368] TOM: 00000000d0000000 aka 3328M
[ 0.080384] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.080390] node 0 link 2: mmio [d8000000, d851ffff]
[ 0.080396] node 0 link 2: mmio [d0000000, d7ffffff]
[ 0.080401] node 0 link 2: mmio [e8000000, efffffff] ==> none
[ 0.080406] node 0 link 2: mmio [fec00000, fec0ffff]
[ 0.080413] node 0 link 2: mmio [a0000, bffff]
[ 0.080419] TOM2: 0000000130000000 aka 4864M
[ 0.080425] bus: [00, ff] on node 0 link 2
[ 0.080427] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.080430] bus: 00 index 1 [mem 0xd0000000-0xdfffffff]
[ 0.080432] bus: 00 index 2 [mem 0xf0000000-0xffffffff]
[ 0.080434] bus: 00 index 3 [mem 0x000a0000-0x000bffff]
[ 0.080437] bus: 00 index 4 [mem 0x130000000-0xfcffffffff]
[ 0.080459] Extended Config Space enabled on 2 nodes
[ 0.080658] ACPI: bus type pci registered
[ 0.080798] PCI: Using configuration type 1 for base access
[ 0.080805] PCI: Using configuration type 1 for extended access
[ 0.082291] bio: create slab <bio-0> at 0
[ 0.082513] ACPI: Added _OSI(Module Device)
[ 0.082521] ACPI: Added _OSI(Processor Device)
[ 0.082527] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.082532] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.083960] ACPI: EC: Look up EC in DSDT
[ 0.088090] ACPI: Interpreter enabled
[ 0.088102] ACPI: (supports S0 S1 S4 S5)
[ 0.088132] ACPI: Using IOAPIC for interrupt routing
[ 0.094459] ACPI: No dock devices found.
[ 0.094472] HEST: Table not found.
[ 0.094479] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.095625] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
[ 0.113462] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
[ 0.113482] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0fff]
[ 0.113489] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
[ 0.113496] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.113504] pci_root PNP0A08:00: host bridge window [io 0x1000-0x7fff]
[ 0.113510] pci_root PNP0A08:00: host bridge window [io 0x8000-0xffff]
[ 0.113517] pci_root PNP0A08:00: host bridge window [mem 0xd8000000-0xd85fffff]
[ 0.113524] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xd7ffffff]
[ 0.113531] pci_root PNP0A08:00: host bridge window [mem 0xfe000000-0xfebfffff]
[ 0.113538] pci_root PNP0A08:00: host bridge window [mem 0xfec04000-0xfecfffff]
[ 0.113545] pci_root PNP0A08:00: host bridge window [mem 0xfed00400-0xfed07fff]
[ 0.113552] pci_root PNP0A08:00: host bridge window [mem 0xfed08008-0xfedfffff]
[ 0.113560] pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xffffffff]
[ 0.113636] pci 0000:00:01.0: [1166:0036] type 1 class 0x000604
[ 0.113735] pci 0000:00:01.0: Enabling HT MSI Mapping
[ 0.113929] pci 0000:00:02.0: [1166:0205] type 0 class 0x000600
[ 0.114075] pci 0000:00:02.1: [1166:0214] type 0 class 0x000101
[ 0.114130] pci 0000:00:02.1: reg 10: [io 0x01f0-0x01f7]
[ 0.114146] pci 0000:00:02.1: reg 14: [io 0x03f4-0x03f7]
[ 0.114162] pci 0000:00:02.1: reg 18: [io 0x0170-0x0177]
[ 0.114177] pci 0000:00:02.1: reg 1c: [io 0x0374-0x0377]
[ 0.114193] pci 0000:00:02.1: reg 20: [io 0x4800-0x480f]
[ 0.114315] pci 0000:00:02.2: [1166:0234] type 0 class 0x000601
[ 0.114508] pci 0000:00:03.0: [1166:0223] type 0 class 0x000c03
[ 0.114546] pci 0000:00:03.0: reg 10: [mem 0xd8510000-0xd8510fff]
[ 0.114568] pci 0000:00:03.0: reg 14: [io 0x4c00-0x4cff]
[ 0.114745] pci 0000:00:03.1: [1166:0223] type 0 class 0x000c03
[ 0.114781] pci 0000:00:03.1: reg 10: [mem 0xd8511000-0xd8511fff]
[ 0.114798] pci 0000:00:03.1: reg 14: [io 0x5000-0x50ff]
[ 0.114968] pci 0000:00:03.2: [1166:0223] type 0 class 0x000c03
[ 0.115004] pci 0000:00:03.2: reg 10: [mem 0xd8512000-0xd8512fff]
[ 0.115021] pci 0000:00:03.2: reg 14: [io 0x5400-0x54ff]
[ 0.115144] pci 0000:00:03.2: supports D1 D2
[ 0.115163] pci 0000:00:03.2: PME# supported from D0 D1 D2 D3hot
[ 0.115170] pci 0000:00:03.2: PME# disabled
[ 0.115233] pci 0000:00:04.0: [1002:515e] type 0 class 0x000300
[ 0.115270] pci 0000:00:04.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
[ 0.115291] pci 0000:00:04.0: reg 14: [io 0x5800-0x58ff]
[ 0.115315] pci 0000:00:04.0: reg 18: [mem 0xd8500000-0xd850ffff]
[ 0.115380] pci 0000:00:04.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.115433] pci 0000:00:04.0: supports D1 D2
[ 0.115488] pci 0000:00:06.0: [1166:0140] type 1 class 0x000604
[ 0.115619] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.115637] pci 0000:00:06.0: PME# disabled
[ 0.115696] pci 0000:00:07.0: [1166:0142] type 1 class 0x000604
[ 0.115814] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.115832] pci 0000:00:07.0: PME# disabled
[ 0.115891] pci 0000:00:08.0: [1166:0144] type 1 class 0x000604
[ 0.116006] pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
[ 0.116006] pci 0000:00:08.0: PME# disabled
[ 0.116114] pci 0000:00:09.0: [1166:0142] type 1 class 0x000604
[ 0.116265] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.116283] pci 0000:00:09.0: PME# disabled
[ 0.116347] pci 0000:00:0a.0: [1166:0144] type 1 class 0x000604
[ 0.116474] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.116488] pci 0000:00:0a.0: PME# disabled
[ 0.116592] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.116708] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.116776] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.116860] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.116948] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.117043] pci 0000:00:19.0: [1022:1200] type 0 class 0x000600
[ 0.117166] pci 0000:00:19.1: [1022:1201] type 0 class 0x000600
[ 0.117238] pci 0000:00:19.2: [1022:1202] type 0 class 0x000600
[ 0.117313] pci 0000:00:19.3: [1022:1203] type 0 class 0x000600
[ 0.117401] pci 0000:00:19.4: [1022:1204] type 0 class 0x000600
[ 0.117582] pci 0000:01:0d.0: [1166:0104] type 1 class 0x000604
[ 0.117755] pci 0000:01:0e.0: [1166:024b] type 0 class 0x000101
[ 0.117787] pci 0000:01:0e.0: reg 10: [io 0x6040-0x6047]
[ 0.117804] pci 0000:01:0e.0: reg 14: [io 0x6034-0x6037]
[ 0.117817] pci 0000:01:0e.0: reg 18: [io 0x6038-0x603f]
[ 0.117830] pci 0000:01:0e.0: reg 1c: [io 0x6030-0x6033]
[ 0.117843] pci 0000:01:0e.0: reg 20: [io 0x6000-0x600f]
[ 0.117857] pci 0000:01:0e.0: reg 24: [mem 0xd8300000-0xd8301fff]
[ 0.117878] pci 0000:01:0e.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.118012] pci 0000:01:0e.1: [1166:024b] type 0 class 0x000101
[ 0.118035] pci 0000:01:0e.1: reg 10: [io 0x6058-0x605f]
[ 0.118065] pci 0000:01:0e.1: reg 14: [io 0x604c-0x604f]
[ 0.118088] pci 0000:01:0e.1: reg 18: [io 0x6050-0x6057]
[ 0.118101] pci 0000:01:0e.1: reg 1c: [io 0x6048-0x604b]
[ 0.118114] pci 0000:01:0e.1: reg 20: [io 0x6020-0x602f]
[ 0.118255] pci 0000:00:01.0: PCI bridge to [bus 01-02]
[ 0.118272] pci 0000:00:01.0: bridge window [io 0x6000-0x6fff]
[ 0.118278] pci 0000:00:01.0: bridge window [mem 0xd8300000-0xd83fffff]
[ 0.118392] pci 0000:01:0d.0: PCI bridge to [bus 02-02]
[ 0.118508] pci 0000:00:06.0: PCI bridge to [bus 03-03]
[ 0.118616] pci 0000:00:07.0: PCI bridge to [bus 04-04]
[ 0.118717] pci 0000:00:08.0: PCI bridge to [bus 05-05]
[ 0.118872] pci 0000:06:00.0: [1000:0056] type 0 class 0x000100
[ 0.118902] pci 0000:06:00.0: reg 10: [io 0x7000-0x70ff]
[ 0.118923] pci 0000:06:00.0: reg 14: [mem 0xd8210000-0xd8213fff 64bit]
[ 0.118952] pci 0000:06:00.0: reg 1c: [mem 0xd8200000-0xd820ffff 64bit]
[ 0.118987] pci 0000:06:00.0: reg 30: [mem 0x00000000-0x000fffff pref]
[ 0.119068] pci 0000:06:00.0: supports D1 D2
[ 0.119103] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.119124] pci 0000:00:09.0: PCI bridge to [bus 06-06]
[ 0.119135] pci 0000:00:09.0: bridge window [io 0x7000-0x7fff]
[ 0.119140] pci 0000:00:09.0: bridge window [mem 0xd8200000-0xd82fffff]
[ 0.119286] pci 0000:07:00.0: [1166:0103] type 1 class 0x000604
[ 0.119415] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 0.119421] pci 0000:07:00.0: PME# disabled
[ 0.119452] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.119475] pci 0000:00:0a.0: PCI bridge to [bus 07-08]
[ 0.119499] pci 0000:00:0a.0: bridge window [mem 0xd8400000-0xd84fffff]
[ 0.119602] pci 0000:08:04.0: [14e4:1678] type 0 class 0x000200
[ 0.119653] pci 0000:08:04.0: reg 10: [mem 0xd8410000-0xd841ffff 64bit]
[ 0.119676] pci 0000:08:04.0: reg 18: [mem 0xd8400000-0xd840ffff 64bit]
[ 0.119790] pci 0000:08:04.0: PME# supported from D3hot D3cold
[ 0.119796] pci 0000:08:04.0: PME# disabled
[ 0.119848] pci 0000:08:04.1: [14e4:1678] type 0 class 0x000200
[ 0.119889] pci 0000:08:04.1: reg 10: [mem 0xd8430000-0xd843ffff 64bit]
[ 0.119911] pci 0000:08:04.1: reg 18: [mem 0xd8420000-0xd842ffff 64bit]
[ 0.120006] pci 0000:08:04.1: PME# supported from D3hot D3cold
[ 0.120006] pci 0000:08:04.1: PME# disabled
[ 0.120081] pci 0000:07:00.0: PCI bridge to [bus 08-08]
[ 0.120103] pci 0000:07:00.0: bridge window [mem 0xd8400000-0xd84fffff]
[ 0.120210] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.120408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXB_._PRT]
[ 0.120455] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXB_.PPBX._PRT]
[ 0.120497] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB0._PRT]
[ 0.120540] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB1._PRT]
[ 0.120580] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB2._PRT]
[ 0.120620] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB3._PRT]
[ 0.120662] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB4._PRT]
[ 0.120702] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.120714] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.120723] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.126737] ACPI: PCI Interrupt Link [LNKU] (IRQs *10 11)
[ 0.126795] ACPI: PCI Interrupt Link [LNKW] (IRQs 10 11) *0, disabled.
[ 0.126882] ACPI: PCI Interrupt Link [LNKS] (IRQs 5 *7 11)
[ 0.126934] ACPI: PCI Interrupt Link [LN00] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.126995] ACPI: PCI Interrupt Link [LN01] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.127059] ACPI: PCI Interrupt Link [LN02] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.127120] ACPI: PCI Interrupt Link [LN03] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.127185] ACPI: PCI Interrupt Link [LN04] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.127255] ACPI: PCI Interrupt Link [LN05] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.127320] ACPI: PCI Interrupt Link [LN06] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.127386] ACPI: PCI Interrupt Link [LN07] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.127452] ACPI: PCI Interrupt Link [LN08] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.127516] ACPI: PCI Interrupt Link [LN09] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.127594] ACPI: PCI Interrupt Link [LN0A] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.127659] ACPI: PCI Interrupt Link [LN0B] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.127729] ACPI: PCI Interrupt Link [LN0C] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.127791] ACPI: PCI Interrupt Link [LN0D] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.127856] ACPI: PCI Interrupt Link [LN0E] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.127912] ACPI: PCI Interrupt Link [LN0F] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.128007] ACPI: PCI Interrupt Link [LN10] (IRQs 3 4 5 7 *11 12 14 15)
[ 0.144137] ACPI: PCI Interrupt Link [LN11] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.144242] ACPI: PCI Interrupt Link [LN12] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.144354] ACPI: PCI Interrupt Link [LN13] (IRQs 3 4 *5 7 11 12 14 15)
[ 0.144451] ACPI: PCI Interrupt Link [LN14] (IRQs 3 4 5 7 *11 12 14 15)
[ 0.144507] ACPI: PCI Interrupt Link [LN15] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.144573] ACPI: PCI Interrupt Link [LN16] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.144636] ACPI: PCI Interrupt Link [LN17] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.144710] ACPI: PCI Interrupt Link [LN18] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.144771] ACPI: PCI Interrupt Link [LN19] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.144836] ACPI: PCI Interrupt Link [LN1A] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.144929] ACPI: PCI Interrupt Link [LN1B] (IRQs 3 4 *5 7 11 12 14 15)
[ 0.144990] ACPI: PCI Interrupt Link [LN1C] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.145050] ACPI: PCI Interrupt Link [LN1D] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.145113] ACPI: PCI Interrupt Link [LN1E] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.145173] ACPI: PCI Interrupt Link [LN1F] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
[ 0.145287] xen/balloon: Initialising balloon driver.
[ 0.150213] xen-balloon: Initialising balloon driver.
[ 0.150260] xen/balloon: Xen selfballooning driver disabled for domain0.
[ 0.150473] vgaarb: device added: PCI:0000:00:04.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.150514] vgaarb: loaded
[ 0.150518] vgaarb: bridge control possible 0000:00:04.0
[ 0.150690] i2c-core: driver [aat2870] using legacy suspend method
[ 0.150699] i2c-core: driver [aat2870] using legacy resume method
[ 0.150824] SCSI subsystem initialized
[ 0.151012] libata version 3.00 loaded.
[ 0.151101] usbcore: registered new interface driver usbfs
[ 0.151131] usbcore: registered new interface driver hub
[ 0.151219] usbcore: registered new device driver usb
[ 0.151451] PCI: Using ACPI for IRQ routing
[ 0.151463] PCI: pci_cache_line_size set to 64 bytes
[ 0.151677] reserve RAM buffer: 000000000009c000 - 000000000009ffff
[ 0.151681] reserve RAM buffer: 00000000cfee0000 - 00000000cfffffff
[ 0.151858] NetLabel: Initializing
[ 0.151868] NetLabel: domain hash size = 128
[ 0.151873] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.151893] NetLabel: unlabeled traffic allowed by default
[ 0.152103] Switching to clocksource xen
[ 0.163349] AppArmor: AppArmor Filesystem Enabled
[ 0.163422] pnp: PnP ACPI init
[ 0.163455] ACPI: bus type pnp registered
[ 0.163554] pnp 00:00: [mem 0xfed08000-0xfed08007]
[ 0.163670] system 00:00: [mem 0xfed08000-0xfed08007] has been reserved
[ 0.163685] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.164529] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.164625] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.164637] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.164684] pnp 00:02: [mem 0xfed00000-0xfed003ff]
[ 0.164687] pnp 00:02: [irq 0 disabled]
[ 0.164695] xen: registering gsi 8 triggering 1 polarity 0
[ 0.164713] pnp 00:02: [irq 8]
[ 0.164760] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.165644] pnp 00:03: [bus 00-7f]
[ 0.165648] pnp 00:03: [io 0x0000-0x03af window]
[ 0.165650] pnp 00:03: [io 0x03e0-0x0fff window]
[ 0.165653] pnp 00:03: [io 0x03b0-0x03df window]
[ 0.165655] pnp 00:03: [mem 0x000a0000-0x000bffff window]
[ 0.165658] pnp 00:03: [io 0x1000-0x7fff window]
[ 0.165660] pnp 00:03: [io 0x8000-0xffff window]
[ 0.165662] pnp 00:03: [mem 0xd8000000-0xd85fffff window]
[ 0.165665] pnp 00:03: [mem 0xd0000000-0xd7ffffff window]
[ 0.165667] pnp 00:03: [mem 0xfe000000-0xfebfffff window]
[ 0.165670] pnp 00:03: [mem 0xfec04000-0xfecfffff window]
[ 0.165672] pnp 00:03: [mem 0xffffffff-0x00000000 window]
[ 0.165675] pnp 00:03: [mem 0xfed00400-0xfed07fff window]
[ 0.165677] pnp 00:03: [mem 0xfed08008-0xfedfffff window]
[ 0.165680] pnp 00:03: [mem 0xfee01000-0xffffffff window]
[ 0.165779] pnp 00:03: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.165883] pnp 00:04: [io 0x0060]
[ 0.165885] pnp 00:04: [io 0x0064]
[ 0.165889] xen: registering gsi 1 triggering 1 polarity 0
[ 0.165897] pnp 00:04: [irq 1]
[ 0.165961] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.166000] pnp 00:05: [io 0x0000-0x001f]
[ 0.166002] pnp 00:05: [io 0x0080-0x008f]
[ 0.166004] pnp 00:05: [io 0x00c0-0x00df]
[ 0.166007] pnp 00:05: [dma 4]
[ 0.166060] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.166093] pnp 00:06: [io 0x0070-0x0071]
[ 0.166095] pnp 00:06: [io 0x0072-0x0073]
[ 0.166141] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.166164] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.166167] xen: registering gsi 13 triggering 1 polarity 0
[ 0.166173] pnp 00:07: [irq 13]
[ 0.166227] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.166248] pnp 00:08: [io 0x0061]
[ 0.166302] pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.166314] xen: registering gsi 12 triggering 1 polarity 0
[ 0.166320] pnp 00:09: [irq 12]
[ 0.166379] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.166402] pnp 00:0a: [mem 0xfec00000-0xfec02fff]
[ 0.166449] pnp 00:0a: Plug and Play ACPI device, IDs PNP0003 (active)
[ 0.166492] pnp 00:0b: [io 0x002e-0x002f]
[ 0.166494] pnp 00:0b: [io 0x0092]
[ 0.166496] pnp 00:0b: [io 0x040b]
[ 0.166498] pnp 00:0b: [io 0x04d0-0x04d1]
[ 0.166500] pnp 00:0b: [io 0x04d6]
[ 0.166502] pnp 00:0b: [io 0x0500-0x0560]
[ 0.166504] pnp 00:0b: [io 0x0558-0x055b]
[ 0.166506] pnp 00:0b: [io 0x0580-0x058f]
[ 0.166508] pnp 00:0b: [io 0x0590-0x0593]
[ 0.166510] pnp 00:0b: [io 0x0600-0x061f]
[ 0.166512] pnp 00:0b: [io 0x0620-0x0623]
[ 0.166515] pnp 00:0b: [io 0x0700-0x0703]
[ 0.166517] pnp 00:0b: [io 0x0c00-0x0c01]
[ 0.166519] pnp 00:0b: [io 0x0c06-0x0c08]
[ 0.166521] pnp 00:0b: [io 0x0c14]
[ 0.166523] pnp 00:0b: [io 0x0c49-0x0c4a]
[ 0.166525] pnp 00:0b: [io 0x0c50-0x0c53]
[ 0.166527] pnp 00:0b: [io 0x0c6c]
[ 0.166529] pnp 00:0b: [io 0x0c6f]
[ 0.166531] pnp 00:0b: [io 0x0cd6-0x0cd7]
[ 0.166533] pnp 00:0b: [io 0x0cf9]
[ 0.166535] pnp 00:0b: [io 0x0f50-0x0f58]
[ 0.166641] system 00:0b: [io 0x040b] has been reserved
[ 0.166652] system 00:0b: [io 0x04d0-0x04d1] has been reserved
[ 0.166660] system 00:0b: [io 0x04d6] has been reserved
[ 0.166666] system 00:0b: [io 0x0500-0x0560] has been reserved
[ 0.166673] system 00:0b: [io 0x0558-0x055b] has been reserved
[ 0.166680] system 00:0b: [io 0x0580-0x058f] has been reserved
[ 0.166687] system 00:0b: [io 0x0590-0x0593] has been reserved
[ 0.166694] system 00:0b: [io 0x0600-0x061f] has been reserved
[ 0.166700] system 00:0b: [io 0x0620-0x0623] has been reserved
[ 0.166707] system 00:0b: [io 0x0700-0x0703] has been reserved
[ 0.166714] system 00:0b: [io 0x0c00-0x0c01] has been reserved
[ 0.166721] system 00:0b: [io 0x0c06-0x0c08] has been reserved
[ 0.166727] system 00:0b: [io 0x0c14] has been reserved
[ 0.166734] system 00:0b: [io 0x0c49-0x0c4a] has been reserved
[ 0.166740] system 00:0b: [io 0x0c50-0x0c53] has been reserved
[ 0.166747] system 00:0b: [io 0x0c6c] has been reserved
[ 0.166753] system 00:0b: [io 0x0c6f] has been reserved
[ 0.166759] system 00:0b: [io 0x0cd6-0x0cd7] has been reserved
[ 0.166766] system 00:0b: [io 0x0cf9] could not be reserved
[ 0.166773] system 00:0b: [io 0x0f50-0x0f58] has been reserved
[ 0.166781] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.166956] pnp 00:0c: [io 0x03f8-0x03ff]
[ 0.166960] xen: registering gsi 4 triggering 1 polarity 0
[ 0.166965] pnp 00:0c: [irq 4]
[ 0.167061] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.167229] pnp 00:0d: [io 0x02f8-0x02ff]
[ 0.167234] xen: registering gsi 3 triggering 1 polarity 0
[ 0.167240] pnp 00:0d: [irq 3]
[ 0.167325] pnp 00:0d: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.167409] pnp 00:0e: [io 0x03f0-0x03f5]
[ 0.167412] pnp 00:0e: [io 0x03f7]
[ 0.167414] xen: registering gsi 6 triggering 1 polarity 0
[ 0.167420] pnp 00:0e: [irq 6]
[ 0.167422] pnp 00:0e: [dma 2]
[ 0.167490] pnp 00:0e: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.167515] pnp 00:0f: [mem 0xfed40000-0xfed44fff]
[ 0.167518] pnp 00:0f: [io 0x004e-0x004f]
[ 0.167520] pnp 00:0f: [io 0x4700-0x470f]
[ 0.167577] pnp 00:0f: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 0.167604] pnp: PnP ACPI: found 16 devices
[ 0.167612] ACPI: ACPI bus type pnp unregistered
[ 0.175909] PM-Timer failed consistency check (0x0xffffff) - aborting.
[ 0.175960] PCI: max bus depth: 2 pci_try_num: 3
[ 0.176074] pci 0000:00:01.0: BAR 15: assigned [mem 0xd8000000-0xd80fffff pref]
[ 0.176085] pci 0000:00:09.0: BAR 15: assigned [mem 0xd8100000-0xd81fffff pref]
[ 0.176094] pci 0000:00:04.0: BAR 6: assigned [mem 0xd8520000-0xd853ffff pref]
[ 0.176104] pci 0000:01:0e.0: BAR 6: assigned [mem 0xd8000000-0xd801ffff pref]
[ 0.176112] pci 0000:01:0d.0: PCI bridge to [bus 02-02]
[ 0.176132] pci 0000:00:01.0: PCI bridge to [bus 01-02]
[ 0.176140] pci 0000:00:01.0: bridge window [io 0x6000-0x6fff]
[ 0.176151] pci 0000:00:01.0: bridge window [mem 0xd8300000-0xd83fffff]
[ 0.176161] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xd80fffff pref]
[ 0.176175] pci 0000:00:06.0: PCI bridge to [bus 03-03]
[ 0.176193] pci 0000:00:07.0: PCI bridge to [bus 04-04]
[ 0.176210] pci 0000:00:08.0: PCI bridge to [bus 05-05]
[ 0.176228] pci 0000:06:00.0: BAR 6: assigned [mem 0xd8100000-0xd81fffff pref]
[ 0.176236] pci 0000:00:09.0: PCI bridge to [bus 06-06]
[ 0.176244] pci 0000:00:09.0: bridge window [io 0x7000-0x7fff]
[ 0.176254] pci 0000:00:09.0: bridge window [mem 0xd8200000-0xd82fffff]
[ 0.176264] pci 0000:00:09.0: bridge window [mem 0xd8100000-0xd81fffff pref]
[ 0.176277] pci 0000:07:00.0: PCI bridge to [bus 08-08]
[ 0.176288] pci 0000:07:00.0: bridge window [mem 0xd8400000-0xd84fffff]
[ 0.176305] pci 0000:00:0a.0: PCI bridge to [bus 07-08]
[ 0.176315] pci 0000:00:0a.0: bridge window [mem 0xd8400000-0xd84fffff]
[ 0.176359] xen: registering gsi 32 triggering 0 polarity 1
[ 0.176394] xen: --> pirq=32 -> irq=32 (gsi=32)
[ 0.176406] pci 0000:00:06.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 0.176421] pci 0000:00:06.0: setting latency timer to 64
[ 0.176430] xen: registering gsi 32 triggering 0 polarity 1
[ 0.176433] Already setup the GSI :32
[ 0.176438] pci 0000:00:07.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 0.176448] pci 0000:00:07.0: setting latency timer to 64
[ 0.176456] xen: registering gsi 32 triggering 0 polarity 1
[ 0.176459] Already setup the GSI :32
[ 0.176465] pci 0000:00:08.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 0.176474] pci 0000:00:08.0: setting latency timer to 64
[ 0.176482] xen: registering gsi 32 triggering 0 polarity 1
[ 0.176485] Already setup the GSI :32
[ 0.176490] pci 0000:00:09.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 0.176500] pci 0000:00:09.0: setting latency timer to 64
[ 0.176508] xen: registering gsi 32 triggering 0 polarity 1
[ 0.176510] Already setup the GSI :32
[ 0.176515] pci 0000:00:0a.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 0.176525] pci 0000:00:0a.0: setting latency timer to 64
[ 0.176536] pci 0000:07:00.0: setting latency timer to 64
[ 0.176544] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.176546] pci_bus 0000:00: resource 5 [io 0x03e0-0x0fff]
[ 0.176549] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.176552] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[ 0.176554] pci_bus 0000:00: resource 8 [io 0x1000-0x7fff]
[ 0.176557] pci_bus 0000:00: resource 9 [io 0x8000-0xffff]
[ 0.176560] pci_bus 0000:00: resource 10 [mem 0xd8000000-0xd85fffff]
[ 0.176562] pci_bus 0000:00: resource 11 [mem 0xd0000000-0xd7ffffff]
[ 0.176565] pci_bus 0000:00: resource 12 [mem 0xfe000000-0xfebfffff]
[ 0.176568] pci_bus 0000:00: resource 13 [mem 0xfec04000-0xfecfffff]
[ 0.176570] pci_bus 0000:00: resource 14 [mem 0xfed00400-0xfed07fff]
[ 0.176573] pci_bus 0000:00: resource 15 [mem 0xfed08008-0xfedfffff]
[ 0.176576] pci_bus 0000:00: resource 16 [mem 0xfee01000-0xffffffff]
[ 0.176579] pci_bus 0000:01: resource 0 [io 0x6000-0x6fff]
[ 0.176582] pci_bus 0000:01: resource 1 [mem 0xd8300000-0xd83fffff]
[ 0.176585] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xd80fffff pref]
[ 0.176589] pci_bus 0000:06: resource 0 [io 0x7000-0x7fff]
[ 0.176592] pci_bus 0000:06: resource 1 [mem 0xd8200000-0xd82fffff]
[ 0.176595] pci_bus 0000:06: resource 2 [mem 0xd8100000-0xd81fffff pref]
[ 0.176598] pci_bus 0000:07: resource 1 [mem 0xd8400000-0xd84fffff]
[ 0.176601] pci_bus 0000:08: resource 1 [mem 0xd8400000-0xd84fffff]
[ 0.176688] NET: Registered protocol family 2
[ 0.177504] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.184045] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.188982] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.189509] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.189518] TCP reno registered
[ 0.189591] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.189680] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.189939] NET: Registered protocol family 1
[ 0.190150] pci 0000:00:02.0: disabled boot interrupts on device [1166:0205]
[ 0.190365] ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 10
[ 0.190375] xen: registering gsi 10 triggering 0 polarity 1
[ 0.190393] pci 0000:00:03.0: PCI INT A -> Link[LNKU] -> GSI 10 (level, low) -> IRQ 10
[ 0.200756] Freeing initrd memory: 40128k freed
[ 0.244204] pci 0000:00:03.0: PCI INT A disabled
[ 0.244245] xen: registering gsi 10 triggering 0 polarity 1
[ 0.244250] Already setup the GSI :10
[ 0.244257] pci 0000:00:03.1: PCI INT A -> Link[LNKU] -> GSI 10 (level, low) -> IRQ 10
[ 0.300152] pci 0000:00:03.1: PCI INT A disabled
[ 0.300188] xen: registering gsi 10 triggering 0 polarity 1
[ 0.300193] Already setup the GSI :10
[ 0.300199] pci 0000:00:03.2: PCI INT A -> Link[LNKU] -> GSI 10 (level, low) -> IRQ 10
[ 0.300433] pci 0000:00:03.2: PCI INT A disabled
[ 0.300468] pci 0000:00:04.0: Boot video device
[ 0.300567] PCI: CLS 64 bytes, default 64
[ 0.301792] audit: initializing netlink socket (disabled)
[ 0.301825] type=2000 audit(1348221692.316:1): initialized
[ 0.345138] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.347355] VFS: Disk quotas dquot_6.5.2
[ 0.347468] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.348282] fuse init (API version 7.17)
[ 0.348466] msgmni has been set to 6331
[ 0.349347] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.349438] io scheduler noop registered
[ 0.349445] io scheduler deadline registered
[ 0.349504] io scheduler cfq registered (default)
[ 0.350832] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.350878] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.351149] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0C:00/input/input0
[ 0.351169] ACPI: Power Button [PWRB]
[ 0.351245] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.351256] ACPI: Power Button [PWRF]
[ 0.351342] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input2
[ 0.351352] ACPI: Sleep Button [SLPF]
[ 0.353690] ERST: Table is not found!
[ 0.353700] GHES: HEST is not enabled!
[ 0.354476] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.375363] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.456857] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.597380] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.660923] 00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.704649] hpet_acpi_add: no address or irqs in _CRS
[ 0.704744] Linux agpgart interface v0.103
[ 0.709632] brd: module loaded
[ 0.710904] loop: module loaded
[ 0.712316] ACPI: PCI Interrupt Link [LNKS] enabled at IRQ 11
[ 0.712331] xen: registering gsi 11 triggering 0 polarity 1
[ 0.712350] pata_acpi 0000:01:0e.0: PCI INT A -> Link[LNKS] -> GSI 11 (level, low) -> IRQ 11
[ 0.712399] pata_acpi 0000:01:0e.0: PCI INT A disabled
[ 0.712495] xen: registering gsi 11 triggering 0 polarity 1
[ 0.712499] Already setup the GSI :11
[ 0.712505] pata_acpi 0000:01:0e.1: PCI INT A -> Link[LNKS] -> GSI 11 (level, low) -> IRQ 11
[ 0.712543] pata_acpi 0000:01:0e.1: PCI INT A disabled
[ 0.713180] Fixed MDIO Bus: probed
[ 0.713213] tun: Universal TUN/TAP device driver, 1.6
[ 0.713219] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[ 0.713360] PPP generic driver version 2.4.2
[ 0.713600] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.713709] xen: registering gsi 10 triggering 0 polarity 1
[ 0.713714] Already setup the GSI :10
[ 0.713720] ehci_hcd 0000:00:03.2: PCI INT A -> Link[LNKU] -> GSI 10 (level, low) -> IRQ 10
[ 0.714075] ehci_hcd 0000:00:03.2: EHCI Host Controller
[ 0.714407] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
[ 0.736122] ehci_hcd 0000:00:03.2: irq 10, io mem 0xd8512000
[ 0.748080] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00
[ 0.748282] hub 1-0:1.0: USB hub found
[ 0.748293] hub 1-0:1.0: 4 ports detected
[ 0.748484] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.748615] xen: registering gsi 10 triggering 0 polarity 1
[ 0.748621] Already setup the GSI :10
[ 0.748628] ohci_hcd 0000:00:03.0: PCI INT A -> Link[LNKU] -> GSI 10 (level, low) -> IRQ 10
[ 0.748677] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 0.748785] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 0.748813] ohci_hcd 0000:00:03.0: irq 10, io mem 0xd8510000
[ 0.804274] hub 2-0:1.0: USB hub found
[ 0.804288] hub 2-0:1.0: 2 ports detected
[ 0.804490] xen: registering gsi 10 triggering 0 polarity 1
[ 0.804494] Already setup the GSI :10
[ 0.804502] ohci_hcd 0000:00:03.1: PCI INT A -> Link[LNKU] -> GSI 10 (level, low) -> IRQ 10
[ 0.804552] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 0.804661] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 0.804694] ohci_hcd 0000:00:03.1: irq 10, io mem 0xd8511000
[ 0.860339] hub 3-0:1.0: USB hub found
[ 0.860352] hub 3-0:1.0: 2 ports detected
[ 0.860475] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.860580] usbcore: registered new interface driver libusual
[ 0.860648] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 0.863813] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.863828] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.864076] mousedev: PS/2 mouse device common for all mice
[ 0.864424] rtc_cmos 00:06: RTC can wake from S4
[ 0.864650] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.864711] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 0.864853] device-mapper: uevent: version 1.0.3
[ 0.864986] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel at redhat.com
[ 0.865006] EFI Variables Facility v0.08 2004-May-17
[ 0.865407] TCP cubic registered
[ 0.865574] NET: Registered protocol family 10
[ 0.866480] NET: Registered protocol family 17
[ 0.866499] Registering the dns_resolver key type
[ 0.866786] PM: Hibernation image not present or could not be loaded.
[ 0.866809] registered taskstats version 1
[ 0.981082] Magic number: 12:616:22
[ 0.981416] rtc_cmos 00:06: setting system clock to 2012-09-21 10:01:32 UTC (1348221692)
[ 0.981561] powernow-k8: Found 1 AMD Engineering Sample (8 cpu cores) (version 2.20.00)
[ 0.981610] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.981617] EDD information not available.
[ 0.982667] Freeing unused kernel memory: 920k freed
[ 0.983129] Write protecting the kernel read-only data: 12288k
[ 0.996865] Freeing unused kernel memory: 1616k freed
[ 0.998805] Freeing unused kernel memory: 1200k freed
[ 1.316222] usb 2-2: new low-speed USB device number 2 using ohci_hcd
[ 1.523012] udevd[153]: starting version 175
[ 1.612987] input: Avocent Dell 03R874 as /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0/input/input3
[ 1.613925] generic-usb 0003:0624:0294.0001: input,hidraw0: USB HID v1.10 Keyboard [Avocent Dell 03R874] on usb-0000:00:03.0-2/input0
[ 1.622743] input: Avocent Dell 03R874 as /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.1/input/input4
[ 1.624852] generic-usb 0003:0624:0294.0002: input,hidraw1: USB HID v1.10 Mouse [Avocent Dell 03R874] on usb-0000:00:03.0-2/input1
[ 1.624932] usbcore: registered new interface driver usbhid
[ 1.624938] usbhid: USB HID core driver
[ 2.043844] Floppy drive(s): fd0 is 1.44M
[ 2.061144] FDC 0 is a National Semiconductor PC87306
[ 2.148671] scsi0 : pata_serverworks
[ 2.149556] scsi1 : pata_serverworks
[ 2.150152] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0x4800 irq 14
[ 2.150179] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0x4808 irq 15
[ 2.197945] sata_svw 0000:01:0e.0: version 2.3
[ 2.198055] xen: registering gsi 11 triggering 0 polarity 1
[ 2.198065] Already setup the GSI :11
[ 2.198085] sata_svw 0000:01:0e.0: PCI INT A -> Link[LNKS] -> GSI 11 (level, low) -> IRQ 11
[ 2.199082] scsi2 : sata_svw
[ 2.199242] scsi3 : sata_svw
[ 2.199358] scsi4 : sata_svw
[ 2.200276] scsi5 : sata_svw
[ 2.200436] ata3: SATA max UDMA/133 mmio m8192 at 0xd8300000 port 0xd8300000 irq 11
[ 2.200448] ata4: SATA max UDMA/133 mmio m8192 at 0xd8300000 port 0xd8300100 irq 11
[ 2.200458] ata5: SATA max UDMA/133 mmio m8192 at 0xd8300000 port 0xd8300200 irq 11
[ 2.200466] ata6: SATA max UDMA/133 mmio m8192 at 0xd8300000 port 0xd8300300 irq 11
[ 2.204745] xen: registering gsi 11 triggering 0 polarity 1
[ 2.204763] Already setup the GSI :11
[ 2.204790] sata_svw 0000:01:0e.1: PCI INT A -> Link[LNKS] -> GSI 11 (level, low) -> IRQ 11
[ 2.312739] ata1.01: ATAPI: DV-28E-R, 1.8A, max UDMA/33
[ 2.328678] ata1.01: configured for UDMA/33
[ 2.334709] scsi 0:0:1:0: CD-ROM TEAC DV-28E-R 1.8A PQ: 0 ANSI: 5
[ 2.340527] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 2.340548] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.341000] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 2.341276] sr 0:0:1:0: Attached scsi generic sg0 type 5
[ 2.428674] tg3.c:v3.121 (November 2, 2011)
[ 2.428723] xen: registering gsi 36 triggering 0 polarity 1
[ 2.428766] xen: --> pirq=36 -> irq=36 (gsi=36)
[ 2.428785] tg3 0000:08:04.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36
[ 2.485199] tg3 0000:08:04.0: eth0: Tigon3 [partno(BCM95715) rev 9003] (PCIX:133MHz:64-bit) MAC address 00:e0:81:80:1d:a0
[ 2.485218] tg3 0000:08:04.0: eth0: attached PHY is 5714 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 2.485228] tg3 0000:08:04.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.485237] tg3 0000:08:04.0: eth0: dma_rwctrl[76148000] dma_mask[40-bit]
[ 2.485493] xen: registering gsi 36 triggering 0 polarity 1
[ 2.485501] Already setup the GSI :36
[ 2.485509] tg3 0000:08:04.1: PCI INT B -> GSI 36 (level, low) -> IRQ 36
[ 2.524108] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.550636] tg3 0000:08:04.1: eth1: Tigon3 [partno(BCM95715) rev 9003] (PCIX:133MHz:64-bit) MAC address 00:e0:81:80:1d:a1
[ 2.550649] tg3 0000:08:04.1: eth1: attached PHY is 5714 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 2.550659] tg3 0000:08:04.1: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.550667] tg3 0000:08:04.1: eth1: dma_rwctrl[76148000] dma_mask[40-bit]
[ 2.575734] ata3.00: ATA-7: ST3160815AS, 3.AAC, max UDMA/133
[ 2.575742] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.642460] ata3.00: configured for UDMA/133
[ 2.642904] scsi 2:0:0:0: Direct-Access ATA ST3160815AS 3.AA PQ: 0 ANSI: 5
[ 2.643452] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.643550] sd 2:0:0:0: [sda] Write Protect is off
[ 2.643560] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.643593] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.643624] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.696388] sda: sda1 sda2 < sda5 >
[ 2.697086] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.964130] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.973304] ata4.00: ATA-8: WDC WD5000AAKS-00V1A0, 05.01D05, max UDMA/133
[ 2.973313] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.981289] ata4.00: configured for UDMA/133
[ 2.981617] scsi 3:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 05.0 PQ: 0 ANSI: 5
[ 2.981983] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.982069] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.982076] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.982107] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.982164] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 3.003571] sdb: sdb1 sdb2 sdb3
[ 3.004231] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 3.314650] ata5: SATA link down (SStatus 4 SControl 300)
[ 3.642638] ata6: SATA link down (SStatus 4 SControl 300)
[ 3.648429] Fusion MPT base driver 3.04.20
[ 3.648456] Copyright (c) 1999-2008 LSI Corporation
[ 3.655074] Fusion MPT SAS Host driver 3.04.20
[ 3.656752] xen: registering gsi 35 triggering 0 polarity 1
[ 3.656807] xen: --> pirq=35 -> irq=35 (gsi=35)
[ 3.656832] mptsas 0000:06:00.0: PCI INT A -> GSI 35 (level, low) -> IRQ 35
[ 3.657167] mptbase: ioc0: Initiating bringup
[ 4.384115] ioc0: LSISAS1064E B1: Capabilities={Initiator}
[ 4.384232] mptsas 0000:06:00.0: setting latency timer to 64
[ 7.906115] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
[ 9.803647] scsi6 : ioc0: LSISAS1064E B1, FwRev=010a0000h, Ports=1, MaxQ=511, IRQ=35
[ 18.473127] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.473145] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 18.584390] udevd[512]: starting version 175
[ 18.649458] Adding 4194300k swap on /dev/mapper/exile-swap_1. Priority:-1 extents:1 across:4194300k
[ 18.828140] lp: driver loaded but no devices found
[ 18.960620] EXT4-fs (dm-6): re-mounted. Opts: errors=remount-ro
[ 19.481908] tpm_tis 00:0f: 1.2 TPM (device-id 0xB, rev-id 16)
[ 19.551477] piix4_smbus 0000:00:02.0: SMBus Host Controller at 0x580, revision 0
[ 19.653001] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 19.672408] [drm] Initialized drm 1.1.0 20060810
[ 19.742123] MCE: In-kernel MCE decoding enabled.
[ 19.746789] EDAC MC: Ver: 2.1.0
[ 19.752015] AMD64 EDAC driver v3.4.0
[ 19.754081] [drm] VGACON disable radeon kernel modesetting.
[ 19.754447] xen: registering gsi 43 triggering 0 polarity 1
[ 19.754526] xen: --> pirq=43 -> irq=43 (gsi=43)
[ 19.754566] pci 0000:00:04.0: PCI INT A -> GSI 43 (level, low) -> IRQ 43
[ 19.755688] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 19.755693] [drm] No driver support for vblank timestamp query.
[ 19.755700] [drm] Initialized radeon 1.33.0 20080528 for 0000:00:04.0 on minor 0
[ 19.760571] EDAC amd64: DRAM ECC disabled.
[ 19.760686] EDAC amd64: NB MCE bank disabled, set MSR 0x0000017b[4] on node 0 to enable.
[ 19.760690] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 19.760692] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 19.760693] (Note that use of the override may cause unknown side effects.)
[ 19.762679] EDAC amd64: DRAM ECC disabled.
[ 19.762797] EDAC amd64: NB MCE bank disabled, set MSR 0x0000017b[4] on node 1 to enable.
[ 19.762800] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 19.762802] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 19.762803] (Note that use of the override may cause unknown side effects.)
[ 19.778325] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[ 19.784669] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
[ 19.981052] AMD64 EDAC driver v3.4.0
[ 20.008678] EDAC amd64: DRAM ECC disabled.
[ 20.008895] EDAC amd64: NB MCE bank disabled, set MSR 0x0000017b[4] on node 0 to enable.
[ 20.008903] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 20.008905] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 20.008907] (Note that use of the override may cause unknown side effects.)
[ 20.012812] EDAC amd64: DRAM ECC disabled.
[ 20.012927] EDAC amd64: NB MCE bank disabled, set MSR 0x0000017b[4] on node 1 to enable.
[ 20.012931] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 20.012933] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 20.012934] (Note that use of the override may cause unknown side effects.)
[ 20.152360] tpm_tis 00:0f: Adjusting TPM timeout parameters.
[ 20.879978] type=1400 audit(1348221712.393:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=762 comm="apparmor_parser"
[ 20.886167] type=1400 audit(1348221712.401:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=762 comm="apparmor_parser"
[ 20.886662] type=1400 audit(1348221712.401:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=762 comm="apparmor_parser"
[ 20.992398] Bridge firewalling registered
[ 21.139954] device eth0 entered promiscuous mode
[ 21.349114] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.489841] ADDRCONF(NETDEV_UP): xenbr0: link is not ready
[ 21.913688] RPC: Registered named UNIX socket transport module.
[ 21.913696] RPC: Registered udp transport module.
[ 21.913699] RPC: Registered tcp transport module.
[ 21.913701] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 21.925121] FS-Cache: Loaded
[ 21.943386] FS-Cache: Netfs 'nfs' registered for caching
[ 22.000753] Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
[ 24.551693] tg3 0000:08:04.0: eth0: Link is up at 1000 Mbps, full duplex
[ 24.551699] tg3 0000:08:04.0: eth0: Flow control is on for TX and on for RX
[ 24.552760] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 24.553017] xenbr0: port 1(eth0) entering forwarding state
[ 24.553055] xenbr0: port 1(eth0) entering forwarding state
[ 24.553881] ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready
[ 34.908090] xenbr0: no IPv6 routers present
[ 39.580091] xenbr0: port 1(eth0) entering forwarding state
[ 63.487282] init: udev-fallback-graphics main process (1232) terminated with status 1
[ 64.183533] init: failsafe main process (944) killed by TERM signal
[ 65.097548] type=1400 audit(1348221756.613:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=1318 comm="apparmor_parser"
[ 65.098184] type=1400 audit(1348221756.613:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1321 comm="apparmor_parser"
[ 65.102615] type=1400 audit(1348221756.617:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/libvirtd" pid=1319 comm="apparmor_parser"
[ 65.103536] type=1400 audit(1348221756.617:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1317 comm="apparmor_parser"
[ 65.104878] type=1400 audit(1348221756.621:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1317 comm="apparmor_parser"
[ 65.105388] type=1400 audit(1348221756.621:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1317 comm="apparmor_parser"
[ 66.587114] init: libvirt-bin main process (1378) terminated with status 127
[ 66.589632] init: libvirt-bin main process ended, respawning
-------------- next part --------------
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 26
model name : Intel(R) Xeon(R) CPU E5520 @ 2.27GHz
stepping : 5
cpu MHz : 2261.022
cache size : 8192 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
apicid : 0
initial apicid : 16
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu de tsc msr pae mce cx8 apic sep mtrr mca cmov pat clflush acpi mmx fxsr sse sse2 ss ht nx constant_tsc up nonstop_tsc aperfmperf pni est ssse3 sse4_1 sse4_2 popcnt hypervisor ida
bogomips : 4546.27
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:
-------------- next part --------------
[ 0.000000] Reserving virtual address space above 0xfdc00000
[ 0.000000] Linux version 2.6.32.43-0.4.1.xs1.5.50.705.170739xen (geeko at buildhost) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-51)) #1 SMP Mon Jul 30 16:37:52 EDT 2012
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 9.263851] Xen-provided machine memory map:
[ 9.263854] BIOS: 0000000000000000 - 00000000000a0000 (usable)
[ 9.263857] BIOS: 0000000000100000 - 00000000bf699000 (usable)
[ 9.263860] BIOS: 00000000bf699000 - 00000000bf6af000 (reserved)
[ 9.263862] BIOS: 00000000bf6af000 - 00000000bf6ce000 (ACPI data)
[ 9.263864] BIOS: 00000000bf6ce000 - 00000000c0000000 (reserved)
[ 9.263866] BIOS: 00000000e0000000 - 00000000f0000000 (reserved)
[ 9.263868] BIOS: 00000000fe000000 - 0000000100000000 (reserved)
[ 9.263870] BIOS: 0000000100000000 - 0000000840000000 (usable)
[ 9.263872] Xen-provided physical RAM map:
[ 9.263874] Xen: 0000000000000000 - 000000002f800000 (usable)
[ 9.264013] DMI 2.6 present.
[ 9.264526] last_pfn = 0x2f800 max_arch_pfn = 0x10000000
[ 9.264529] initial memory mapped : 0 - 00000000
[ 9.264531] init_memory_mapping: 0000000000000000-000000002f800000
[ 9.264537] NX (Execute Disable) protection: active
[ 9.264540] 0000000000 - 002f800000 page 4k
[ 9.264636] kernel direct mapping tables up to 2f800000 @ e41000-fc2000
[ 9.583514] RAMDISK: 006a2000 - 00d73c00
[ 9.586174] ACPI: RSDP 000f1630 00024 (v02 DELL )
[ 9.586179] ACPI: XSDT 000f1734 0009C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 9.586186] ACPI: FACP bf6c3f9c 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
[ 9.586196] ACPI: DSDT bf6af000 0320F (v01 DELL PE_SC3 00000001 INTL 20050624)
[ 9.586201] ACPI: FACS bf6c6000 00040
[ 9.586205] ACPI: APIC bf6c3478 0015E (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 9.586211] ACPI: SPCR bf6c35d8 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 9.586216] ACPI: HPET bf6c362c 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 9.586221] ACPI: XMAR bf6c3668 001C0 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 9.586226] ACPI: MCFG bf6c38c4 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 9.586231] ACPI: WD__ bf6c3904 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 9.586236] ACPI: SLIC bf6c3a3c 00024 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 9.586242] ACPI: ERST bf6b2390 00270 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 9.586247] ACPI: HEST bf6b2600 0027C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 9.586252] ACPI: BERT bf6b2210 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 9.586257] ACPI: EINJ bf6b2240 00150 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 9.586262] ACPI: SRAT bf6c3bc0 00370 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 9.586268] ACPI: TCPA bf6c3f34 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
[ 9.586273] ACPI: SSDT bf6c7000 04194 (v01 INTEL PPM RCM 80000001 INTL 20061109)
[ 9.586295] 0MB HIGHMEM available.
[ 9.586296] 760MB LOWMEM available.
[ 9.586299] mapped low ram: 0 - 2f800000
[ 9.586300] low ram: 0 - 2f800000
[ 9.586307] node 0 low ram: 00000000 - 2f000000
[ 9.586309] node 0 bootmap 00000000 - 00005e00
[ 9.587764] (5 early reservations) ==> bootmem [0000000000 - 002f000000]
[ 9.587766] #0 [0000100000 - 0000681e14] TEXT DATA BSS ==> [0000100000 - 0000681e14]
[ 9.587780] #1 [00006a2000 - 0000e41000] Xen provided ==> [00006a2000 - 0000e41000]
[ 9.587797] #2 [0000682000 - 00006823d5] BRK ==> [0000682000 - 00006823d5]
[ 9.587800] #3 [0000e41000 - 0000fb7000] PGTABLE ==> [0000e41000 - 0000fb7000]
[ 9.587805] #4 [0000000000 - 0000006000] BOOTMAP ==> [0000000000 - 0000006000]
[ 9.587822] found SMP MP-table at [fdbf9710] 000fe710
[ 9.593702] Zone PFN ranges:
[ 9.593705] DMA 0x00000000 -> 0x00001000
[ 9.593706] Normal 0x00001000 -> 0x0002f800
[ 9.593708] HighMem 0x0002f800 -> 0x0002f800
[ 9.593709] Movable zone start PFN for each node
[ 9.593710] early_node_map[2] active PFN ranges
[ 9.593712] 0: 0x00000000 -> 0x0002f000
[ 9.593714] 0: 0x0002f800 -> 0x0002f800
[ 9.593716] On node 0 totalpages: 192512
[ 9.594519] free_area_init_node: node 0, pgdat c055dd80, node_mem_map c1002000
[ 9.594521] DMA zone: 32 pages used for memmap
[ 9.594523] DMA zone: 0 pages reserved
[ 9.594527] DMA zone: 4064 pages, LIFO batch:0
[ 9.594594] Normal zone: 1488 pages used for memmap
[ 9.594597] Normal zone: 186928 pages, LIFO batch:31
[ 9.597891] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 9.597894] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled)
[ 9.597896] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[ 9.597897] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
[ 9.597899] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
[ 9.597901] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x04] enabled)
[ 9.597902] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
[ 9.597904] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x06] enabled)
[ 9.597905] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled)
[ 9.597907] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x01] enabled)
[ 9.597909] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)
[ 9.597910] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x03] enabled)
[ 9.597912] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] enabled)
[ 9.597913] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x05] enabled)
[ 9.597915] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] enabled)
[ 9.597917] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x07] enabled)
[ 9.597918] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
[ 9.597920] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
[ 9.597922] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
[ 9.597923] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
[ 9.597925] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
[ 9.597926] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
[ 9.597928] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
[ 9.597930] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
[ 9.597931] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
[ 9.597933] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
[ 9.597935] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
[ 9.597936] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
[ 9.597938] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
[ 9.597939] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
[ 9.597941] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
[ 9.597943] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
[ 9.597949] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 9.597953] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 9.597962] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 9.597964] ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])
[ 9.597969] IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
[ 9.597973] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 9.597976] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 9.597979] ACPI: IRQ0 used by override.
[ 9.597980] ACPI: IRQ2 used by override.
[ 9.597983] ACPI: IRQ9 used by override.
[ 9.597988] Using ACPI (MADT) for SMP configuration information
[ 9.598011] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 9.598016] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 9.598035] PERCPU: Embedded 10 pages/cpu @c16b9000 s18072 r0 d22888 u65536
[ 9.598040] pcpu-alloc: s18072 r0 d22888 u65536 alloc=16*4096
[ 9.598041] pcpu-alloc: [0] 0
[ 9.598063] Swapping MFNs for PFN 5c7 and 16bb (MFN be5c7 and be945)
[ 9.598086] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 190992
[ 9.598090] Kernel command line: root=LABEL=root-xsdyygyw ro console=tty0 xencons=hvc console=hvc0
[ 9.598116] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 9.598192] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 9.598393] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 9.598629] Enabling fast FPU save and restore... done.
[ 9.598636] Enabling unmasked SIMD FPU exception support... done.
[ 9.598639] Initializing CPU#0
[ 9.634983] Software IO TLB enabled:
[ 9.634984] Aperture: 64 megabytes
[ 9.634985] Address size: 28 bits
[ 9.634986] Kernel range: c1788000 - c5788000
[ 9.634989] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 9.639165] Initializing HighMem for node 0 (00000000:00000000)
[ 9.639169] Memory: 682000k/778240k available (2921k kernel code, 87856k reserved, 1591k data, 388k init, 0k highmem)
[ 9.639174] virtual kernel memory layout:
[ 9.639175] fixmap : 0xfd877000 - 0xfdbff000 (3616 kB)
[ 9.639176] pkmap : 0xfd400000 - 0xfd600000 (2048 kB)
[ 9.639177] vmalloc : 0xf0000000 - 0xfd3fe000 ( 211 MB)
[ 9.639178] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 9.639179] .init : 0xc0569000 - 0xc05ca000 ( 388 kB)
[ 9.639180] .data : 0xc03da6d4 - 0xc056847c (1591 kB)
[ 9.639181] .text : 0xc0100000 - 0xc03da6d4 (2921 kB)
[ 9.639183] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 9.639268] Hierarchical RCU implementation.
[ 9.639273] NR_IRQS:2048
[ 9.639509] Extended CMOS year: 2000
[ 9.639513] Xen reported: 2261.022 MHz processor.
[ 9.641968] Console: colour VGA+ 80x25
[ 9.654835] console [tty0] enabled
[ 9.670126] console [hvc0] enabled
[ 9.796261] Calibrating delay using timer specific routine.. 4546.27 BogoMIPS (lpj=22731369)
[ 9.796473] pid_max: default: 32768 minimum: 301
[ 9.796599] Mount-cache hash table entries: 512
[ 9.796796] mce: CPU supports 9 MCE banks
[ 9.796917] Checking 'hlt' instruction... OK.
[ 9.797495] SMP alternatives: switching to UP code
[ 9.817325] Freeing SMP alternatives: 19k freed
[ 9.817422] ACPI: Core revision 20090903
[ 9.825261] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 9.825357] ftrace: allocating 13093 entries in 26 pages
[ 9.829933] Brought up 1 CPUs
[ 9.834309] Grant table version 2
[ 9.834442] NET: Registered protocol family 16
[ 9.834774] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 9.834889] ACPI: bus type pci registered
[ 9.835014] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 9.835112] PCI: MCFG area at e0000000 reserved in E820
[ 9.835205] PCI: Using MMCONFIG for extended config space
[ 9.835327] PCI: Using configuration type 1 for base access
[ 9.836571] bio: create slab <bio-0> at 0
[ 9.837150] ACPI: EC: Look up EC in DSDT
[ 9.838386] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
[ 9.838637] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_._OSC] (Node ee81d5d8), AE_NOT_FOUND
[ 9.839408] ACPI: BIOS _OSI(Linux) query ignored
[ 9.839561] ACPI: Interpreter enabled
[ 9.839650] ACPI: (supports S0 S5)
[ 9.839879] ACPI: Using IOAPIC for interrupt routing
[ 9.845123] ACPI: No dock devices found.
[ 9.845218] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 9.845670] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 9.845916] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 9.846015] pci 0000:00:00.0: PME# disabled
[ 9.846234] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 9.846362] pci 0000:00:01.0: PME# disabled
[ 9.846604] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 9.846702] pci 0000:00:03.0: PME# disabled
[ 9.846923] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 9.848529] pci 0000:00:04.0: PME# disabled
[ 9.848750] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 9.848848] pci 0000:00:05.0: PME# disabled
[ 9.849069] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 9.849196] pci 0000:00:06.0: PME# disabled
[ 9.849417] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 9.849515] pci 0000:00:07.0: PME# disabled
[ 9.849738] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 9.849836] pci 0000:00:09.0: PME# disabled
[ 9.850332] pci 0000:00:1a.0: reg 20 io port: [0xcc40-0xcc5f]
[ 9.850455] pci 0000:00:1a.1: reg 20 io port: [0xcc60-0xcc7f]
[ 9.850613] pci 0000:00:1a.7: reg 10 32bit mmio: [0xdfcff800-0xdfcffbff]
[ 9.850706] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 9.850805] pci 0000:00:1a.7: PME# disabled
[ 9.850988] pci 0000:00:1d.0: reg 20 io port: [0xcc80-0xcc9f]
[ 9.851111] pci 0000:00:1d.1: reg 20 io port: [0xcca0-0xccbf]
[ 9.851239] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdfcffc00-0xdfcfffff]
[ 9.851332] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 9.851431] pci 0000:00:1d.7: PME# disabled
[ 9.851738] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
[ 9.851853] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
[ 9.851996] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f)
[ 9.852197] pci 0000:00:1f.2: reg 10 io port: [0xcc10-0xcc17]
[ 9.852206] pci 0000:00:1f.2: reg 14 io port: [0xcc08-0xcc0b]
[ 9.852215] pci 0000:00:1f.2: reg 18 io port: [0xcc18-0xcc1f]
[ 9.852224] pci 0000:00:1f.2: reg 1c io port: [0xcc0c-0xcc0f]
[ 9.852232] pci 0000:00:1f.2: reg 20 io port: [0xcc20-0xcc2f]
[ 9.852241] pci 0000:00:1f.2: reg 24 io port: [0xcc30-0xcc3f]
[ 9.852382] pci 0000:01:00.0: reg 10 64bit mmio: [0xd6000000-0xd7ffffff]
[ 9.852476] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 9.852574] pci 0000:01:00.0: PME# disabled
[ 9.852751] pci 0000:01:00.1: reg 10 64bit mmio: [0xd8000000-0xd9ffffff]
[ 9.852845] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
[ 9.852943] pci 0000:01:00.1: PME# disabled
[ 9.853100] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 9.853200] pci 0000:00:01.0: bridge 32bit mmio: [0xd6000000-0xd9ffffff]
[ 9.853316] pci 0000:02:00.0: reg 10 64bit mmio: [0xda000000-0xdbffffff]
[ 9.853410] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 9.853507] pci 0000:02:00.0: PME# disabled
[ 9.853685] pci 0000:02:00.1: reg 10 64bit mmio: [0xdc000000-0xddffffff]
[ 9.853778] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[ 9.853876] pci 0000:02:00.1: PME# disabled
[ 9.854034] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 9.854133] pci 0000:00:03.0: bridge 32bit mmio: [0xda000000-0xddffffff]
[ 9.854188] pci 0000:03:00.0: reg 10 io port: [0xfc00-0xfcff]
[ 9.854205] pci 0000:03:00.0: reg 14 64bit mmio: [0xdfeec000-0xdfeeffff]
[ 9.854221] pci 0000:03:00.0: reg 1c 64bit mmio: [0xdfef0000-0xdfefffff]
[ 9.854237] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xdfd00000-0xdfdfffff]
[ 9.854277] pci 0000:03:00.0: supports D1 D2
[ 9.854341] pci 0000:00:04.0: PCI bridge to [bus 03-03]
[ 9.854437] pci 0000:00:04.0: bridge io port: [0xf000-0xffff]
[ 9.854442] pci 0000:00:04.0: bridge 32bit mmio: [0xdfd00000-0xdfefffff]
[ 9.854503] pci 0000:00:05.0: PCI bridge to [bus 04-04]
[ 9.854740] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 9.854839] pci 0000:05:00.0: PME# disabled
[ 9.854989] pci 0000:00:06.0: PCI bridge to [bus 05-08]
[ 9.855085] pci 0000:00:06.0: bridge io port: [0xd000-0xefff]
[ 9.855090] pci 0000:00:06.0: bridge 32bit mmio: [0xdf000000-0xdfbfffff]
[ 9.855204] pci 0000:06:02.0: PME# supported from D0 D3hot D3cold
[ 9.855303] pci 0000:06:02.0: PME# disabled
[ 9.855509] pci 0000:06:04.0: PME# supported from D0 D3hot D3cold
[ 9.855608] pci 0000:06:04.0: PME# disabled
[ 9.855766] pci 0000:05:00.0: PCI bridge to [bus 06-08]
[ 9.855867] pci 0000:05:00.0: bridge io port: [0xd000-0xefff]
[ 9.855873] pci 0000:05:00.0: bridge 32bit mmio: [0xdf000000-0xdfbfffff]
[ 9.855959] pci 0000:07:00.0: reg 10 32bit mmio: [0xdf7c0000-0xdf7dffff]
[ 9.855970] pci 0000:07:00.0: reg 14 32bit mmio: [0xdf800000-0xdf9fffff]
[ 9.855981] pci 0000:07:00.0: reg 18 io port: [0xecc0-0xecdf]
[ 9.855992] pci 0000:07:00.0: reg 1c 32bit mmio: [0xdf7b8000-0xdf7bbfff]
[ 9.856205] pci 0000:07:00.1: reg 10 32bit mmio: [0xdf7e0000-0xdf7fffff]
[ 9.856216] pci 0000:07:00.1: reg 14 32bit mmio: [0xdfa00000-0xdfbfffff]
[ 9.856227] pci 0000:07:00.1: reg 18 io port: [0xece0-0xecff]
[ 9.856238] pci 0000:07:00.1: reg 1c 32bit mmio: [0xdf7bc000-0xdf7bffff]
[ 9.856420] pci 0000:06:02.0: PCI bridge to [bus 07-07]
[ 9.856521] pci 0000:06:02.0: bridge io port: [0xe000-0xefff]
[ 9.856527] pci 0000:06:02.0: bridge 32bit mmio: [0xdf600000-0xdfbfffff]
[ 9.856783] pci 0000:08:00.0: reg 10 32bit mmio: [0xdf1c0000-0xdf1dffff]
[ 9.856795] pci 0000:08:00.0: reg 14 32bit mmio: [0xdf200000-0xdf3fffff]
[ 9.856806] pci 0000:08:00.0: reg 18 io port: [0xdcc0-0xdcdf]
[ 9.856817] pci 0000:08:00.0: reg 1c 32bit mmio: [0xdf1b8000-0xdf1bbfff]
[ 9.857001] pci 0000:08:00.1: reg 10 32bit mmio: [0xdf1e0000-0xdf1fffff]
[ 9.857012] pci 0000:08:00.1: reg 14 32bit mmio: [0xdf400000-0xdf5fffff]
[ 9.857023] pci 0000:08:00.1: reg 18 io port: [0xdce0-0xdcff]
[ 9.857034] pci 0000:08:00.1: reg 1c 32bit mmio: [0xdf1bc000-0xdf1bffff]
[ 9.857216] pci 0000:06:04.0: PCI bridge to [bus 08-08]
[ 9.857319] pci 0000:06:04.0: bridge io port: [0xd000-0xdfff]
[ 9.857324] pci 0000:06:04.0: bridge 32bit mmio: [0xdf000000-0xdf5fffff]
[ 9.857447] pci 0000:00:07.0: PCI bridge to [bus 09-09]
[ 9.857605] pci 0000:00:09.0: PCI bridge to [bus 0a-0a]
[ 9.857770] pci 0000:0b:03.0: reg 10 32bit mmio pref: [0xd5800000-0xd5ffffff]
[ 9.857780] pci 0000:0b:03.0: reg 14 32bit mmio: [0xde7fc000-0xde7fffff]
[ 9.857790] pci 0000:0b:03.0: reg 18 32bit mmio: [0xde800000-0xdeffffff]
[ 9.857824] pci 0000:0b:03.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 9.857924] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] (subtractive decode)
[ 9.858028] pci 0000:00:1e.0: bridge 32bit mmio: [0xde000000-0xdeffffff]
[ 9.858038] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd5800000-0xd5ffffff]
[ 9.858040] pci 0000:00:1e.0: bridge window [0x00-0xffff] (subtractive decode)
[ 9.858042] pci 0000:00:1e.0: bridge window [0x000000-0xffffffffffffffff] (subtractive decode)
[ 9.858099] pci_bus 0000:00: on NUMA node 0
[ 9.858102] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 9.858409] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 9.858468] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 9.858526] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 9.858584] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[ 9.858642] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
[ 9.858700] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
[ 9.858759] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX9._PRT]
[ 9.858851] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
[ 9.862020] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
[ 9.862927] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)
[ 9.863857] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 9.864786] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 9.865684] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 9.866612] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)
[ 9.867554] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 9.868641] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15)
[ 9.869575] xen_mem: Initialising balloon driver.
[ 9.869824] vgaarb: device added: PCI:0000:0b:03.0,decodes=io+mem,owns=io+mem,locks=none
[ 9.869968] vgaarb: loaded
[ 9.870138] PCI: Using ACPI for IRQ routing
[ 9.870480] Switching to clocksource xen
[ 9.871450] pnp: PnP ACPI init
[ 9.871547] ACPI: bus type pnp registered
[ 9.874916] pnp: PnP ACPI: found 13 devices
[ 9.875008] ACPI: ACPI bus type pnp unregistered
[ 9.875110] system 00:07: ioport range 0x800-0x87f has been reserved
[ 9.875205] system 00:07: ioport range 0x880-0x8ff has been reserved
[ 9.875300] system 00:07: ioport range 0x900-0x91f has been reserved
[ 9.875396] system 00:07: ioport range 0x920-0x923 has been reserved
[ 9.875521] system 00:07: ioport range 0x924-0x924 has been reserved
[ 9.875616] system 00:07: ioport range 0xc00-0xc7f has been reserved
[ 9.875711] system 00:07: ioport range 0xca0-0xca7 has been reserved
[ 9.875807] system 00:07: ioport range 0xca9-0xcab has been reserved
[ 9.875902] system 00:07: ioport range 0xcad-0xcaf has been reserved
[ 9.876000] system 00:08: ioport range 0xca8-0xca8 has been reserved
[ 9.876095] system 00:08: ioport range 0xcac-0xcac has been reserved
[ 9.876194] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 9.876293] system 00:0c: iomem range 0xfed90000-0xfed91fff has been reserved
[ 9.877266] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 9.877362] pci 0000:00:01.0: IO window: disabled
[ 9.877459] pci 0000:00:01.0: MEM window: 0xd6000000-0xd9ffffff
[ 9.877557] pci 0000:00:01.0: PREFETCH window: disabled
[ 9.877657] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 9.877750] pci 0000:00:03.0: IO window: disabled
[ 9.877847] pci 0000:00:03.0: MEM window: 0xda000000-0xddffffff
[ 9.877944] pci 0000:00:03.0: PREFETCH window: disabled
[ 9.878047] pci 0000:00:04.0: PCI bridge, secondary bus 0000:03
[ 9.878143] pci 0000:00:04.0: IO window: 0xf000-0xffff
[ 9.878270] pci 0000:00:04.0: MEM window: 0xdfd00000-0xdfefffff
[ 9.878367] pci 0000:00:04.0: PREFETCH window: disabled
[ 9.878466] pci 0000:00:05.0: PCI bridge, secondary bus 0000:04
[ 9.878559] pci 0000:00:05.0: IO window: disabled
[ 9.878655] pci 0000:00:05.0: MEM window: disabled
[ 9.878750] pci 0000:00:05.0: PREFETCH window: disabled
[ 9.878850] pci 0000:06:02.0: PCI bridge, secondary bus 0000:07
[ 9.878946] pci 0000:06:02.0: IO window: 0xe000-0xefff
[ 9.879045] pci 0000:06:02.0: MEM window: 0xdf600000-0xdfbfffff
[ 9.879143] pci 0000:06:02.0: PREFETCH window: disabled
[ 9.879244] pci 0000:06:04.0: PCI bridge, secondary bus 0000:08
[ 9.879340] pci 0000:06:04.0: IO window: 0xd000-0xdfff
[ 9.879438] pci 0000:06:04.0: MEM window: 0xdf000000-0xdf5fffff
[ 9.879536] pci 0000:06:04.0: PREFETCH window: disabled
[ 9.879667] pci 0000:05:00.0: PCI bridge, secondary bus 0000:06
[ 9.879763] pci 0000:05:00.0: IO window: 0xd000-0xefff
[ 9.879862] pci 0000:05:00.0: MEM window: 0xdf000000-0xdfbfffff
[ 9.879961] pci 0000:05:00.0: PREFETCH window: disabled
[ 9.880063] pci 0000:00:06.0: PCI bridge, secondary bus 0000:05
[ 9.880158] pci 0000:00:06.0: IO window: 0xd000-0xefff
[ 9.880255] pci 0000:00:06.0: MEM window: 0xdf000000-0xdfbfffff
[ 9.880352] pci 0000:00:06.0: PREFETCH window: disabled
[ 9.880452] pci 0000:00:07.0: PCI bridge, secondary bus 0000:09
[ 9.880546] pci 0000:00:07.0: IO window: disabled
[ 9.880642] pci 0000:00:07.0: MEM window: disabled
[ 9.880736] pci 0000:00:07.0: PREFETCH window: disabled
[ 9.880835] pci 0000:00:09.0: PCI bridge, secondary bus 0000:0a
[ 9.880929] pci 0000:00:09.0: IO window: disabled
[ 9.881056] pci 0000:00:09.0: MEM window: disabled
[ 9.881151] pci 0000:00:09.0: PREFETCH window: disabled
[ 9.881252] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0b
[ 9.881345] pci 0000:00:1e.0: IO window: disabled
[ 9.881442] pci 0000:00:1e.0: MEM window: 0xde000000-0xdeffffff
[ 9.881539] pci 0000:00:1e.0: PREFETCH window: 0x000000d5800000-0x000000d5ffffff
[ 9.881703] pci 0000:00:01.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 9.881803] pci 0000:00:01.0: setting latency timer to 64
[ 9.881814] pci 0000:00:03.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 9.881913] pci 0000:00:03.0: setting latency timer to 64
[ 9.881924] pci 0000:00:04.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 9.882022] pci 0000:00:04.0: setting latency timer to 64
[ 9.882033] pci 0000:00:05.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 9.882132] pci 0000:00:05.0: setting latency timer to 64
[ 9.882143] pci 0000:00:06.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 9.882242] pci 0000:00:06.0: setting latency timer to 64
[ 9.882258] pci 0000:05:00.0: setting latency timer to 64
[ 9.882274] pci 0000:06:02.0: setting latency timer to 64
[ 9.882290] pci 0000:06:04.0: setting latency timer to 64
[ 9.882302] pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 9.882430] pci 0000:00:07.0: setting latency timer to 64
[ 9.882441] pci 0000:00:09.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 9.882540] pci 0000:00:09.0: setting latency timer to 64
[ 9.882549] pci 0000:00:1e.0: setting latency timer to 64
[ 9.882554] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 9.882556] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 9.882558] pci_bus 0000:01: resource 1 mem: [0xd6000000-0xd9ffffff]
[ 9.882560] pci_bus 0000:02: resource 1 mem: [0xda000000-0xddffffff]
[ 9.882562] pci_bus 0000:03: resource 0 io: [0xf000-0xffff]
[ 9.882564] pci_bus 0000:03: resource 1 mem: [0xdfd00000-0xdfefffff]
[ 9.882566] pci_bus 0000:05: resource 0 io: [0xd000-0xefff]
[ 9.882568] pci_bus 0000:05: resource 1 mem: [0xdf000000-0xdfbfffff]
[ 9.882570] pci_bus 0000:06: resource 0 io: [0xd000-0xefff]
[ 9.882571] pci_bus 0000:06: resource 1 mem: [0xdf000000-0xdfbfffff]
[ 9.882573] pci_bus 0000:07: resource 0 io: [0xe000-0xefff]
[ 9.882575] pci_bus 0000:07: resource 1 mem: [0xdf600000-0xdfbfffff]
[ 9.882577] pci_bus 0000:08: resource 0 io: [0xd000-0xdfff]
[ 9.882579] pci_bus 0000:08: resource 1 mem: [0xdf000000-0xdf5fffff]
[ 9.882581] pci_bus 0000:0b: resource 1 mem: [0xde000000-0xdeffffff]
[ 9.882583] pci_bus 0000:0b: resource 2 pref mem [0xd5800000-0xd5ffffff]
[ 9.882585] pci_bus 0000:0b: resource 4 io: [0x00-0xffff]
[ 9.882587] pci_bus 0000:0b: resource 5 mem: [0x000000-0xffffffffffffffff]
[ 9.882602] NET: Registered protocol family 2
[ 9.882714] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 9.882875] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 9.883241] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 9.883455] TCP: Hash tables configured (established 131072 bind 65536)
[ 9.883550] TCP reno registered
[ 9.883674] NET: Registered protocol family 1
[ 9.898877] pci 0000:07:00.0: Disabling L0s
[ 9.898991] pci 0000:07:00.1: Disabling L0s
[ 9.899133] pci 0000:08:00.0: Disabling L0s
[ 9.899244] pci 0000:08:00.1: Disabling L0s
[ 9.899368] pci 0000:0b:03.0: Boot video device
[ 9.899393] Trying to unpack rootfs image as initramfs...
[ 9.903549] Freeing initrd memory: 6983k freed
[ 9.905612] MCE: bind virq for DOM0 logging
[ 9.912059] VFS: Disk quotas dquot_6.5.2
[ 9.912162] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 9.912283] msgmni has been set to 379
[ 9.912472] alg: No test for stdrng (krng)
[ 9.912600] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 9.912713] io scheduler noop registered
[ 9.912803] io scheduler anticipatory registered
[ 9.912924] io scheduler deadline registered
[ 9.913020] io scheduler cfq registered (default)
[ 9.913321] pcieport 0000:00:01.0: get owner: 7ff0
[ 9.913458] pcieport 0000:00:01.0: irq 1279 (310) for MSI/MSI-X
[ 9.913472] pcieport 0000:00:01.0: setting latency timer to 64
[ 9.913709] pcieport 0000:00:03.0: get owner: 7ff0
[ 9.913834] pcieport 0000:00:03.0: irq 1278 (309) for MSI/MSI-X
[ 9.913846] pcieport 0000:00:03.0: setting latency timer to 64
[ 9.914082] pcieport 0000:00:04.0: get owner: 7ff0
[ 9.914207] pcieport 0000:00:04.0: irq 1277 (308) for MSI/MSI-X
[ 9.914219] pcieport 0000:00:04.0: setting latency timer to 64
[ 9.914484] pcieport 0000:00:05.0: get owner: 7ff0
[ 9.914608] pcieport 0000:00:05.0: irq 1276 (307) for MSI/MSI-X
[ 9.914621] pcieport 0000:00:05.0: setting latency timer to 64
[ 9.914856] pcieport 0000:00:06.0: get owner: 7ff0
[ 9.914980] pcieport 0000:00:06.0: irq 1275 (306) for MSI/MSI-X
[ 9.914993] pcieport 0000:00:06.0: setting latency timer to 64
[ 9.915232] pcieport 0000:00:07.0: get owner: 7ff0
[ 9.915356] pcieport 0000:00:07.0: irq 1274 (305) for MSI/MSI-X
[ 9.915369] pcieport 0000:00:07.0: setting latency timer to 64
[ 9.915603] pcieport 0000:00:09.0: get owner: 7ff0
[ 9.915757] pcieport 0000:00:09.0: irq 1273 (304) for MSI/MSI-X
[ 9.915770] pcieport 0000:00:09.0: setting latency timer to 64
[ 9.915978] pcieport 0000:05:00.0: setting latency timer to 64
[ 9.916186] pcieport 0000:06:02.0: get owner: 7ff0
[ 9.916322] pcieport 0000:06:02.0: irq 1272 (303) for MSI/MSI-X
[ 9.916337] pcieport 0000:06:02.0: setting latency timer to 64
[ 9.916576] pcieport 0000:06:04.0: get owner: 7ff0
[ 9.916712] pcieport 0000:06:04.0: irq 1271 (302) for MSI/MSI-X
[ 9.916727] pcieport 0000:06:04.0: setting latency timer to 64
[ 9.917258] aer 0000:00:01.0:pcie02: service driver aer loaded
[ 9.917342] aer 0000:00:03.0:pcie02: service driver aer loaded
[ 9.917423] aer 0000:00:04.0:pcie02: service driver aer loaded
[ 9.917503] aer 0000:00:05.0:pcie02: service driver aer loaded
[ 9.917618] aer 0000:00:06.0:pcie02: service driver aer loaded
[ 9.917697] aer 0000:00:07.0:pcie02: service driver aer loaded
[ 9.917776] aer 0000:00:09.0:pcie02: service driver aer loaded
[ 9.942620] floppy0: Unable to grab DMA2 for the floppy driver
[ 12.958615] floppy0: no floppy controllers found
[ 12.959920] brd: module loaded
[ 12.970871] loop: module loaded
[ 12.971074] Xen virtual console successfully installed as hvc0
[ 12.971216] Event-channel device installed.
[ 12.971349] blktap_device_init: blktap device major 253
[ 12.971444] blktap_ring_init: blktap ring major: 253
[ 12.971902] netfront: Initialising virtual ethernet driver.
[ 12.972129] Uniform Multi-Platform E-IDE driver
[ 12.972685] PNP: No PS/2 controller found. Probing ports directly.
[ 12.975531] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 12.975627] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 12.975901] mice: PS/2 mouse device common for all mice
[ 12.976147] NET: Registered protocol family 17
[ 12.976401] registered taskstats version 1
[ 12.977629] PCI IO multiplexer device installed.
[ 12.977738] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 12.977967] Freeing unused kernel memory: 388k freed
[ 13.319305] usbcore: registered new interface driver usbfs
[ 13.319453] usbcore: registered new interface driver hub
[ 13.319597] usbcore: registered new device driver usb
[ 13.322468] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 13.322647] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 13.322766] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 13.322770] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 13.322876] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 13.323040] ehci_hcd 0000:00:1a.7: debug port 1
[ 13.327007] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 13.327112] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdfcff800
[ 13.348604] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 13.348834] usb usb1: configuration #1 chosen from 1 choice
[ 13.348972] hub 1-0:1.0: USB hub found
[ 13.349074] hub 1-0:1.0: 4 ports detected
[ 13.349288] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 13.349401] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 13.349404] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 13.349502] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 13.349656] ehci_hcd 0000:00:1d.7: debug port 1
[ 13.353618] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 13.353684] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xdfcffc00
[ 13.368604] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 13.368817] usb usb2: configuration #1 chosen from 1 choice
[ 13.368955] hub 2-0:1.0: USB hub found
[ 13.369055] hub 2-0:1.0: 4 ports detected
[ 13.371490] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 13.373874] uhci_hcd: USB Universal Host Controller Interface driver
[ 13.374030] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 13.374133] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 13.374137] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 13.374240] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 13.374442] uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000cc40
[ 13.374657] usb usb3: configuration #1 chosen from 1 choice
[ 13.374795] hub 3-0:1.0: USB hub found
[ 13.374926] hub 3-0:1.0: 2 ports detected
[ 13.375134] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 13.375236] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 13.375240] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 13.375336] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 13.375537] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000cc60
[ 13.375750] usb usb4: configuration #1 chosen from 1 choice
[ 13.375889] hub 4-0:1.0: USB hub found
[ 13.375990] hub 4-0:1.0: 2 ports detected
[ 13.376160] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 13.376294] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 13.376298] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 13.376394] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 13.376533] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000cc80
[ 13.376741] usb usb5: configuration #1 chosen from 1 choice
[ 13.376878] hub 5-0:1.0: USB hub found
[ 13.376979] hub 5-0:1.0: 2 ports detected
[ 13.377186] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 13.377289] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 13.377293] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 13.377389] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 13.377619] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000cca0
[ 13.377832] usb usb6: configuration #1 chosen from 1 choice
[ 13.377969] hub 6-0:1.0: USB hub found
[ 13.378069] hub 6-0:1.0: 2 ports detected
[ 13.429494] SCSI subsystem initialized
[ 13.442308] Fusion MPT base driver 4.28.00.00
[ 13.442402] Copyright (c) 1999-2010 LSI Corporation
[ 13.452996] Fusion MPT SAS Host driver 4.28.00.00
[ 13.453165] mptsas 0000:03:00.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33
[ 13.453268] mptbase: ioc0: 32 BIT PCI BUS DMA ADDRESSING SUPPORTED, total memory = 777420 kB
[ 13.453436] mptbase: ioc0: Initiating bringup
[ 13.728608] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 13.879080] usb 1-3: configuration #1 chosen from 1 choice
[ 13.879413] hub 1-3:1.0: USB hub found
[ 13.879629] hub 1-3:1.0: 3 ports detected
[ 14.278606] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 14.463662] usb 3-1: configuration #1 chosen from 1 choice
[ 14.768606] usb 5-2: new full speed USB device using uhci_hcd and address 2
[ 14.939750] usb 5-2: configuration #1 chosen from 1 choice
[ 15.048600] ioc0: LSISAS1068E B3: Capabilities={Initiator}
[ 15.049100] mptsas 0000:03:00.0: setting latency timer to 64
[ 34.112438] scsi0 : ioc0: LSISAS1068E B3, FwRev=00192f00h, Ports=1, MaxQ=266, IRQ=33
[ 35.148602] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x1221000000000000
[ 35.148846] target0:0:0: mptsas: ioc0: add device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x1221000000000000
[ 35.151181] scsi 0:0:0:0: Direct-Access ATA WDC WD2502ABYS-1 3B04 PQ: 0 ANSI: 5
[ 35.152660] scsi 0:0:0:0: mptscsih: ioc0: qdepth=64, tagged=1, simple=1, ordered=0, scsi_level=6, cmd_que=1
[ 35.152792] sdev dma_alignment 511
[ 35.154545] sd 0:0:0:0: [sda] 488281250 512-byte logical blocks: (250 GB/232 GiB)
[ 35.162615] sd 0:0:0:0: [sda] Write Protect is off
[ 35.162708] sd 0:0:0:0: [sda] Mode Sense: 73 00 00 08
[ 35.164594] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 35.175030] sda: detected capacity change from 0 to 250000000000
[ 35.175139] sda:
[ 35.228829] Alternate GPT is invalid, using primary GPT.
[ 35.229035] sda1 sda2 sda3
[ 35.240486] sd 0:0:0:0: [sda] Attached SCSI disk
[ 35.246830] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel at redhat.com
[ 46.527455] kjournald starting. Commit interval 15 seconds
[ 46.527608] EXT3-fs: mounted filesystem with ordered data mode.
[ 51.676329] input: PC Speaker as /class/input/input0
[ 52.112706] libata version 3.00 loaded.
[ 52.122932] ata_piix 0000:00:1f.2: version 2.13
[ 52.122999] ata_piix 0000:00:1f.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[ 52.123006] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 52.277436] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 52.320771] bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.1j (Mar 07, 2012)
[ 52.320837] bnx2 0000:01:00.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36
[ 52.320846] bnx2 0000:01:00.0: setting latency timer to 64
[ 52.321386] bnx2 0000:01:00.0: eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d6000000, IRQ 36, node addr 00:24:e8:39:bb:b6
[ 52.321456] bnx2 0000:01:00.1: PCI INT B -> GSI 48 (level, low) -> IRQ 48
[ 52.321463] bnx2 0000:01:00.1: setting latency timer to 64
[ 52.321942] bnx2 0000:01:00.1: eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d8000000, IRQ 48, node addr 00:24:e8:39:bb:b8
[ 52.322010] bnx2 0000:02:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 52.322017] bnx2 0000:02:00.0: setting latency timer to 64
[ 52.322526] bnx2 0000:02:00.0: eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem da000000, IRQ 32, node addr 00:24:e8:39:bb:ba
[ 52.322594] bnx2 0000:02:00.1: PCI INT B -> GSI 42 (level, low) -> IRQ 42
[ 52.322601] bnx2 0000:02:00.1: setting latency timer to 64
[ 52.323078] bnx2 0000:02:00.1: eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 42, node addr 00:24:e8:39:bb:bc
[ 52.327011] scsi1 : ata_piix
[ 52.335321] scsi2 : ata_piix
[ 52.335353] ata1: SATA max UDMA/133 cmd 0xcc10 ctl 0xcc08 bmdma 0xcc20 irq 23
[ 52.335358] ata2: SATA max UDMA/133 cmd 0xcc18 ctl 0xcc0c bmdma 0xcc28 irq 23
[ 52.880583] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 52.900861] ata1.00: ATAPI: TEAC DVD-ROM DV28SV, D.0K, max UDMA/100
[ 52.941323] ata1.00: configured for UDMA/100
[ 52.954067] scsi 1:0:0:0: CD-ROM TEAC DVD-ROM DV28SV D.0K PQ: 0 ANSI: 5
[ 53.248539] input: Power Button as /class/input/input1
[ 53.248545] ACPI: Power Button [PWRF]
[ 53.523979] ata2: failed to resume link (SControl 0)
[ 53.535459] ata2: SATA link down (SStatus 4 SControl 0)
[ 53.543580] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 53.543820] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 53.560638] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 53.567692] rtc_cmos 00:04: RTC can wake from S4
[ 53.567732] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 53.567813] rtc0: alarms up to one day, y3k, 242 bytes nvram
[ 53.689986] Intel(R) Gigabit Ethernet Network Driver - version 3.3.6
[ 53.689989] Copyright (c) 2007-2011 Intel Corporation.
[ 53.690104] igb 0000:07:00.0: PCI INT A -> GSI 45 (level, low) -> IRQ 45
[ 53.690177] igb 0000:07:00.0: setting latency timer to 64
[ 53.690551] igb 0000:07:00.0: get owner: 7ff0
[ 53.690634] igb 0000:07:00.0: irq 1270 (301) for MSI/MSI-X
[ 53.690636] igb 0000:07:00.0: get owner: 7ff0
[ 53.690700] igb 0000:07:00.0: irq 1269 (300) for MSI/MSI-X
[ 54.077965] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 54.077968] igb 0000:07:00.0: eth4: (PCIe:2.5GT/s:Width x4
[ 54.077969] )
[ 54.077970] igb 0000:07:00.0: eth4: MAC: 00:1b:21:3e:fe:90
[ 54.078055] igb 0000:07:00.0: eth4: PBA No: D96950-006
[ 54.078082] igb 0000:07:00.0: LRO is disabled
[ 54.078084] igb 0000:07:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
[ 54.078189] igb 0000:07:00.1: PCI INT B -> GSI 47 (level, low) -> IRQ 47
[ 54.078262] igb 0000:07:00.1: setting latency timer to 64
[ 54.078645] igb 0000:07:00.1: get owner: 7ff0
[ 54.078728] igb 0000:07:00.1: irq 1268 (299) for MSI/MSI-X
[ 54.078730] igb 0000:07:00.1: get owner: 7ff0
[ 54.078796] igb 0000:07:00.1: irq 1267 (298) for MSI/MSI-X
[ 54.348494] igb 0000:07:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 54.348497] igb 0000:07:00.1: eth5: (PCIe:2.5GT/s:Width x4
[ 54.348498] )
[ 54.348500] igb 0000:07:00.1: eth5: MAC: 00:1b:21:3e:fe:91
[ 54.348584] igb 0000:07:00.1: eth5: PBA No: D96950-006
[ 54.348612] igb 0000:07:00.1: LRO is disabled
[ 54.348614] igb 0000:07:00.1: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
[ 54.348721] igb 0000:08:00.0: PCI INT A -> GSI 35 (level, low) -> IRQ 35
[ 54.348793] igb 0000:08:00.0: setting latency timer to 64
[ 54.349174] igb 0000:08:00.0: get owner: 7ff0
[ 54.349256] igb 0000:08:00.0: irq 1266 (297) for MSI/MSI-X
[ 54.349258] igb 0000:08:00.0: get owner: 7ff0
[ 54.349321] igb 0000:08:00.0: irq 1265 (296) for MSI/MSI-X
[ 54.620319] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 54.620322] igb 0000:08:00.0: eth6: (PCIe:2.5GT/s:Width x4
[ 54.620323] )
[ 54.620324] igb 0000:08:00.0: eth6: MAC: 00:1b:21:3e:fe:94
[ 54.620408] igb 0000:08:00.0: eth6: PBA No: D96950-006
[ 54.620435] igb 0000:08:00.0: LRO is disabled
[ 54.620436] igb 0000:08:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
[ 54.620542] igb 0000:08:00.1: PCI INT B -> GSI 46 (level, low) -> IRQ 46
[ 54.620614] igb 0000:08:00.1: setting latency timer to 64
[ 54.620997] igb 0000:08:00.1: get owner: 7ff0
[ 54.621079] igb 0000:08:00.1: irq 1264 (295) for MSI/MSI-X
[ 54.621081] igb 0000:08:00.1: get owner: 7ff0
[ 54.621143] igb 0000:08:00.1: irq 1263 (294) for MSI/MSI-X
[ 54.765004] usbcore: registered new interface driver hiddev
[ 54.778756] input: Avocent Dell 03R874 as /class/input/input2
[ 54.778764] generic-usb 0003:0624:0294.0001: input: USB HID v1.10 Keyboard [Avocent Dell 03R874] on usb-0000:00:1a.0-1/input0
[ 54.801783] input: Avocent Dell 03R874 as /class/input/input3
[ 54.801852] generic-usb 0003:0624:0294.0002: input: USB HID v1.10 Mouse [Avocent Dell 03R874] on usb-0000:00:1a.0-1/input1
[ 54.806816] input: Avocent USB Composite Device-0 as /class/input/input4
[ 54.806822] generic-usb 0003:0624:0248.0003: input: USB HID v1.00 Keyboard [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input0
[ 54.811210] input: Avocent USB Composite Device-0 as /class/input/input5
[ 54.811243] generic-usb 0003:0624:0248.0004: input: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input1
[ 54.811262] usbcore: registered new interface driver usbhid
[ 54.811264] usbhid: v2.6:USB HID core driver
[ 54.891185] igb 0000:08:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 54.891189] igb 0000:08:00.1: eth7: (PCIe:2.5GT/s:Width x4
[ 54.891189] )
[ 54.891191] igb 0000:08:00.1: eth7: MAC: 00:1b:21:3e:fe:95
[ 54.891275] igb 0000:08:00.1: eth7: PBA No: D96950-006
[ 54.891301] igb 0000:08:00.1: LRO is disabled
[ 54.891302] igb 0000:08:00.1: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
[ 55.491419] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 55.491454] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 58.269076] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 58.269079] Uniform CD-ROM driver Revision: 3.20
[ 58.269184] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 59.890762] Non-volatile memory driver v1.3
[ 59.957706] lp: driver loaded but no devices found
[ 60.210890] md: Autodetecting RAID arrays.
[ 60.210893] md: Scanned 0 and added 0 devices.
[ 60.210894] md: autorun ...
[ 60.210895] md: ... autorun DONE.
[ 60.507733] EXT3 FS on sda1, internal journal
[ 60.607846] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 60.621887] ISO 9660 Extensions: RRIP_1991A
[ 61.470422] Adding 524280k swap on /var/swap/swap.001. Priority:-1 extents:137 across:533376k
[ 62.451372] Microcode Update Driver: v2.00-xen <tigran at aivazian.fsnet.co.uk>, Peter Oruba
[ 62.519772] Microcode Update Driver: v2.00-xen removed.
[ 62.990331] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 63.085001] nf_conntrack version 0.5.0 (12147 buckets, 48588 max)
[ 63.347323] openvswitch: Open vSwitch switching datapath 1.4.2, built Aug 3 2012 11:17:41
[ 66.143858] device xenbr0 entered promiscuous mode
[ 66.161777] bnx2 0000:01:00.0: get owner: 7ff0
[ 66.161863] bnx2 0000:01:00.0: irq 1262 (293) for MSI/MSI-X
[ 66.161865] bnx2 0000:01:00.0: get owner: 7ff0
[ 66.161919] bnx2 0000:01:00.0: irq 1261 (292) for MSI/MSI-X
[ 66.161920] bnx2 0000:01:00.0: get owner: 7ff0
[ 66.161974] bnx2 0000:01:00.0: irq 1260 (291) for MSI/MSI-X
[ 66.239657] bnx2 0000:01:00.0: eth0: using MSIX
[ 66.249179] device eth0 entered promiscuous mode
[ 69.377694] bnx2 0000:01:00.0: eth0: NIC Copper Link is Up, 1000 Mbps full duplexbnx2:
[ 72.275737] RPC: Registered udp transport module.
[ 72.275740] RPC: Registered tcp transport module.
[ 72.275741] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 74.196167] warning: `ntpdate' uses 32-bit capabilities (legacy support in use)
[ 75.736563] suspend: event channel 32
[ 86.231967] device xenbr6 entered promiscuous mode
[ 86.466034] device eth6 entered promiscuous mode
[ 86.674247] device xenbr3 entered promiscuous mode
[ 86.692396] bnx2 0000:02:00.1: get owner: 7ff0
[ 86.692483] bnx2 0000:02:00.1: irq 1259 (290) for MSI/MSI-X
[ 86.692485] bnx2 0000:02:00.1: get owner: 7ff0
[ 86.692539] bnx2 0000:02:00.1: irq 1258 (289) for MSI/MSI-X
[ 86.692541] bnx2 0000:02:00.1: get owner: 7ff0
[ 86.692594] bnx2 0000:02:00.1: irq 1257 (288) for MSI/MSI-X
[ 86.769680] bnx2 0000:02:00.1: eth3: using MSIX
[ 86.780068] device eth3 entered promiscuous mode
[ 86.979878] device xenbr2 entered promiscuous mode
[ 86.998321] bnx2 0000:02:00.0: get owner: 7ff0
[ 86.998408] bnx2 0000:02:00.0: irq 1256 (287) for MSI/MSI-X
[ 86.998410] bnx2 0000:02:00.0: get owner: 7ff0
[ 86.998464] bnx2 0000:02:00.0: irq 1255 (286) for MSI/MSI-X
[ 86.998466] bnx2 0000:02:00.0: get owner: 7ff0
[ 86.998520] bnx2 0000:02:00.0: irq 1254 (285) for MSI/MSI-X
[ 87.069707] bnx2 0000:02:00.0: eth2: using MSIX
[ 87.080072] device eth2 entered promiscuous mode
[ 87.286305] device xenbr7 entered promiscuous mode
[ 87.504796] device eth7 entered promiscuous mode
[ 87.706110] device xenbr1 entered promiscuous mode
[ 87.724834] bnx2 0000:01:00.1: get owner: 7ff0
[ 87.724921] bnx2 0000:01:00.1: irq 1253 (284) for MSI/MSI-X
[ 87.724923] bnx2 0000:01:00.1: get owner: 7ff0
[ 87.724978] bnx2 0000:01:00.1: irq 1252 (283) for MSI/MSI-X
[ 87.724980] bnx2 0000:01:00.1: get owner: 7ff0
[ 87.725034] bnx2 0000:01:00.1: irq 1251 (282) for MSI/MSI-X
[ 87.799620] bnx2 0000:01:00.1: eth1: using MSIX
[ 87.811025] device eth1 entered promiscuous mode
[ 88.190980] device xenbr5 entered promiscuous mode
[ 88.410118] device eth5 entered promiscuous mode
[ 88.612173] device xenbr4 entered promiscuous mode
[ 88.825874] device eth4 entered promiscuous mode
[ 90.649844] igb: eth4 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 90.719080] igb: eth5 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 90.968374] bnx2 0000:01:00.1: eth1: NIC Copper Link is Up, 1000 Mbps full duplexbnx2:
More information about the ubuntu-server
mailing list