system not booting after upgrading the kernel
Asif Iqbal
vadud3 at gmail.com
Fri Jan 13 17:36:09 UTC 2012
On Fri, Jan 13, 2012 at 12:09 PM, Asif Iqbal <vadud3 at gmail.com> wrote:
> My system is not booting to OS after upgrading the kernel from
> 2.6.32-36 to 2.6.32-37 on ubuntu lucid 64bit LTS
>
> [ 82.750869] scsi: killing requests for dead queue
> [ 82.750940] scsi: killing requests for dead queue
> [ 82.751020] scsi: killing requests for dead queue
> [ 82.751087] scsi: killing requests for dead queue
> [ 82.751157] scsi: killing requests for dead queue
> [ 82.751235] scsi: killing requests for dead queue
> [ 83.201503] scsi: killing requests for dead queue
> [ 83.201559] scsi: killing requests for dead queue
> [ 83.201625] scsi: killing requests for dead queue
> [ 83.201848] sd 3:0:0:0: Attached scsi generic sg1 type 0
> [ 83.201861] sd 3:0:0:0: [sda] 143134720 512-byte logical blocks:
> (73.2 GB/68.2 GiB)
> [ 83.201876] sd 3:0:0:0: [sda] Write Protect is off
> [ 83.201905] sd 3:0:0:0: [sda] Write cache: disabled, read cache:
> enabled, supports DPO and FUA
> [ 83.202019] sd 3:0:1:0: Attached scsi generic sg2 type 0
> [ 83.202066] sd 3:0:1:0: [sdb] 143134720 512-byte logical blocks:
> (73.2 GB/68.2 GiB)
> [ 83.202088] sd 3:0:1:0: [sdb] Write Protect is off
> [ 83.202094] sda:
> [ 83.202137] sd 3:0:2:0: Attached scsi generic sg3 type 0
> [ 83.202165] sd 3:0:1:0: [sdb] Write cache: disabled, read cache:
> enabled, supports DPO and FUA
> [ 83.202184] sd 3:0:2:0: [sdc] 143134720 512-byte logical blocks:
> (73.2 GB/68.2 GiB)
> [ 83.202201] sd 3:0:2:0: [sdc] Write Protect is off
> [ 83.202229] sd 3:0:2:0: [sdc] Write cache: disabled, read cache:
> enabled, supports DPO and FUA
> [ 83.202301] sda1 sda2
> [ 83.202349] sd 3:0:3:0: Attached scsi generic sg4 type 0
> [ 83.202408] sdb:
> [ 83.202419] sd 3:0:3:0: [sdd] 143134720 512-byte logical blocks:
> (73.2 GB/68.2 GiB)
> [ 83.202440] sd 3:0:3:0: [sdd] Write Protect is off
> [ 83.202477] sd 3:0:3:0: [sdd] Write cache: disabled, read cache:
> enabled, supports DPO and FUA
> [ 83.202506] sdb1 sdb2
> [ 83.202526] sdc:
> [ 83.202580] sd 3:0:4:0: Attached scsi generic sg5 type 0
> [ 83.202648] sdc1
> [ 83.202735] sd 3:0:5:0: Attached scsi generic sg6 type 0
> [ 83.202868] sd 3:0:6:0: Attached scsi generic sg7 type 0
> [ 83.202991] sd 3:0:7:0: Attached scsi generic sg8 type 0
> [ 83.203084] scsi 3:1:0:0: Attached scsi generic sg9 type 0
> [ 83.203175] scsi 3:1:1:0: Attached scsi generic sg10 type 0
> [ 83.203265] scsi 3:1:2:0: Attached scsi generic sg11 type 0
> [ 83.203349] scsi 3:1:3:0: Attached scsi generic sg12 type 0
> [ 83.203439] scsi 3:1:4:0: Attached scsi generic sg13 type 0
> [ 83.203529] scsi 3:1:5:0: Attached scsi generic sg14 type 0
> [ 83.203631] scsi 3:1:6:0: Attached scsi generic sg15 type 0
> [ 83.203725] scsi 3:1:7:0: Attached scsi generic sg16 type 0
> [ 83.203818] scsi 3:3:0:0: Attached scsi generic sg17 type 13
> [ 83.203931] scsi 3:3:1:0: Attached scsi generic sg18 type 13
> [ 83.652273] sd 3:0:4:0: [sde] 143134720 512-byte logical blocks:
> (73.2 GB/68.2 GiB)
> [ 83.652295] sd 3:0:4:0: [sde] Write Protect is off
> [ 83.652324] sd 3:0:4:0: [sde] Write cache: disabled, read cache:
> enabled, supports DPO and FUA
> [ 83.662740] sd 3:0:5:0: [sdf] 143134720 512-byte logical blocks:
> (73.2 GB/68.2 GiB)
> [ 83.662752] sd 3:0:5:0: [sdf] Write Protect is off
> [ 83.662776] sd 3:0:5:0: [sdf] Write cache: disabled, read cache:
> enabled, supports DPO and FUA
> [ 86.157374] sd 3:0:6:0: [sdg] 143134720 512-byte logical blocks:
> (73.2 GB/68.2 GiB)
> [ 86.157386] sd 3:0:6:0: [sdg] Write Protect is off
> [ 86.157410] sd 3:0:6:0: [sdg] Write cache: disabled, read cache:
> enabled, supports DPO and FUA
> [ 86.170053] sd 3:0:7:0: [sdh] 143134720 512-byte logical blocks:
> (73.2 GB/68.2 GiB)
> [ 86.170064] sd 3:0:7:0: [sdh] Write Protect is off
> [ 86.170087] sd 3:0:7:0: [sdh] Write cache: disabled, read cache:
> enabled, supports DPO and FUA
> [ 86.661916] sdd:
> [ 86.661982] sd 3:0:0:0: [sda] Attached SCSI removable disk
> [ 86.662049] sdd1
> [ 86.662065] sdh:
> [ 86.662336] sd 3:0:2:0: [sdc] Attached SCSI removable disk
> [ 86.662389] sdh1
> [ 86.662413] sdg:
> [ 86.662418] sd 3:0:1:0: [sdb] Attached SCSI removable disk
> [ 87.166186] sde: sdg1
> [ 87.478768] sde1
> [ 87.478933] sd 3:0:7:0: [sdh] Attached SCSI removable disk
> [ 87.507117] sdf: sdf1
> [ 87.507292] sd 3:0:6:0: [sdg] Attached SCSI removable disk
> [ 87.689976] sd 3:0:4:0: [sde] Attached SCSI removable disk
> [ 87.689997] sd 3:0:3:0: [sdd] Attached SCSI removable disk
> [ 87.690325] sd 3:0:5:0: [sdf] Attached SCSI removable disk
> [ 87.912605] md: bind<sdc1>
> [ 87.946695] md: bind<sdf1>
> [ 87.980220] md: bind<sda2>
> [ 88.013967] md: bind<sda1>
> ALERT! /dev/disk[ 88.062014] md: bind<sdb1>
> /by-uuid/08febc8[ 88.096453] md: bind<sdb2>
> 5-9ce2-40ac-a354[ 88.145336] md: bind<sdh1>
> -e006f709a586 do[ 88.193902] raid1: raid set md0 active with 2 out
> of 2 mirrors
> es not exist. Dr[ 88.280220] md0: detected capacity change from 0 to
> 31999328256
> opping to a shel[ 88.367718] raid1: raid set md1 active with 2 out
> of 2 mirrors
> l!
>
>
> BusyBox [ 88.368534] md0:v1.13.3 (Ubuntu
> 1:1.13.3-1ubuntu[ 88.491525] md1: detected capacity change from 0 to
> 41283420160
> 11) built-in she[ 88.491626] unknown partition table
> [ 88.491771] ses 3:3:0:0: Attached Enclosure device
> ll (ash)
> Enter [ 88.491780] ses 3:3:1:0: Attached Enclosure device
> 'help' for a lis[ 88.788890] md: bind<sdg1>
> t of built-in co[ 88.789441] md1:mmands.
>
> (init unknown partition table
> ramfs) [ 88.989019] md: bind<sdd1>
> [ 89.189178] md: bind<sde1>
> [ 89.223307] raid10: raid set md10 active with 6 out of 6 devices
> [ 89.295336] md10: detected capacity change from 0 to 219836645376
> [ 89.369302] md10: unknown partition table
>
> (initramfs)
>
>
> Any idea how to get it fixed?
>
--
Asif Iqbal
PGP Key: 0xE62693C5 KeyServer: pgp.mit.edu
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
More information about the ubuntu-server
mailing list