Hardware vs software raid

[Diego Xirinachs]

Again, thanks all for the input,

Michael, great information! just to be clear, I meant RAID 1 not 0 (little
typo there). I currently have RAID 1 software raid on a samba server I
mantain. I think Im going to use the same type for this server (only that
with hardware RAID) because of the easy troubleshooting in case of failure
(just replace RAID card and thats it).

Also, I was wondering if you can provide the Dell mailist list subscribe
link? or where can I find it?



El jueves 20 de octubre de 2011, Aaron C. de Bruyn escribió:

> I'n not sure about the whole hardware -vs- software faster/slower
> issue--but I do know when we picked hardware RAID, we had issues with
> cards failing and the underlying drives being inaccessible without the
> card.
> You'd think if you have two drives in a RAID1 and the card died you
> could simply plug one of the disks directly into the motherboard and
> continue on without the card--but that doesn't seem to be the case.
>
> The partition tables are usually offset because the card reserves an
> initial chunk of the drive for its data.  We would regularly have to
> run the linux 'testdisk' command to locate and re-write the partition
> table in the correct spot.  Then re-RAIDing the drives after the RAID
> card came in would be a huge hassle because one drive would have
> issues because we re-wrote the partition table.
>
> On the flip-side, I've never had trouble with software RAID in Linux.
> It *seems* a little slower to me, but I've never run any tests.
>
> -A
>
> On Thu, Oct 20, 2011 at 07:46, Dan Trevino <dantrevino at gmail.com> wrote:
> > Software raid.  The biggest impacts to your performance are going to be
> > outside the hardware/software raid decision (network, DB, etc, etc).
> >
> > Also, I'm not sure if this applies in your case, but never depend on
> drivers
> > that are only available from a single source.
> >
> > Dan
> >
> > On Oct 19, 2011 7:36 PM, "Diego Xirinachs" <dxiri343 at gmail.com> wrote:
> >>
> >> Hi list,
> >>
> >> We are about to implement open bravo on our organization and need a new
> >> server.
> >>
> >> I decided to get a dell r310 but I dont know if I should get the
> hardware
> >> raid or just configure software raid on the server.
> >>
> >> I have been reading about this but still I am undecided.
> >>
> >> What do you think?
> >>
> >> Cheers
> >>
> >> --
> >> ubuntu-server mailing list
> >> ubuntu-server at lists.ubuntu.com
> >> https://lists.ubuntu.com/mailman/listinfo/ubuntu-server
> >> More info: https://wiki.ubuntu.com/ServerTeam
> >
> > --
> > ubuntu-server mailing list
> > ubuntu-server at lists.ubuntu.com
> > https://lists.ubuntu.com/mailman/listinfo/ubuntu-server
> > More info: https://wiki.ubuntu.com/ServerTeam
> >
>


-- 
X1R1
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ubuntu.com/archives/ubuntu-server/attachments/20111020/59d8475f/attachment.html>