3w-9xxx: scsi0: ERROR

Fri Nov 20 12:29:44 UTC 2009

On Fri, Nov 20, 2009 at 5:02 PM, Andy Smith <andy at strugglers.net> wrote:
> Hi Kaushal,
>
> On Fri, Nov 20, 2009 at 12:30:27PM +0530, Kaushal Shriyan wrote:
>> I have the below information in the syslog.
>>
>> Nov 19 22:55:22 host0104 kernel: [19938.001554] program smartctl is
>> using a deprecated SCSI ioctl, please convert it to SG_IO
>> Nov 19 22:55:22 host0104 kernel: [19938.002814] 3w-9xxx: scsi0: ERROR:
>> (0x03:0x0101): Invalid command opcode:opcode=0x80.
>>
>> Any ideas to fix the above issue?
>
> Do you know that it's an actual problem?  I believe I have seen this
> before when SMART commands are sent to the wrong device.
>
> Do you have something like smartctld or hddtemp installed or did you
> simply run smartctl?
>
> On my machines with 3ware 9xxx cards, the way to call smartctl is:
>
> sudo smartctl -d 3ware,0 -a /dev/twa0
>
> where the number after the comma is the disk number, e.g. 0 is the
> first disk.

Hi Andy,

I did that too already. The issue is that the server is very much
unstable and it freezes.

Below are the details of the SMART Test

# smartctl -i -d 3ware,0 /dev/twa0
smartctl version 5.37 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6
Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar RE Serial ATA series
Device Model:     WDC WD4000YR-01PLB0
Serial Number:    WD-WMAMY1085515
Firmware Version: 01.06A01
User Capacity:    400,088,457,216 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  ATA/ATAPI-7 published, ANSI INCITS 397-2005
Local Time is:    Thu Nov 19 23:36:10 2009 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

# smartctl -l error -d 3ware,0 /dev/twa0
smartctl version 5.37 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6
Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
No Errors Logged

# smartctl -A -d 3ware,0 /dev/twa0
smartctl version 5.37 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6
Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE
UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   200   200   051    Pre-fail
Always       -       0
  3 Spin_Up_Time            0x0007   247   227   021    Pre-fail
Always       -       4691
  4 Start_Stop_Count        0x0032   100   100   040    Old_age
Always       -       55
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail
Always       -       0
  7 Seek_Error_Rate         0x000b   200   200   051    Pre-fail
Always       -       0
  9 Power_On_Hours          0x0032   051   051   000    Old_age
Always       -       36479
 10 Spin_Retry_Count        0x0013   100   253   051    Pre-fail
Always       -       0
 11 Calibration_Retry_Count 0x0013   100   253   051    Pre-fail
Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age
Always       -       55
194 Temperature_Celsius     0x0022   137   118   000    Old_age
Always       -       15
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age
Always       -       0
197 Current_Pending_Sector  0x0012   200   200   000    Old_age
Always       -       0
198 Offline_Uncorrectable   0x0012   200   200   000    Old_age
Always       -       0
199 UDMA_CRC_Error_Count    0x000a   200   253   000    Old_age
Always       -       0
200 Multi_Zone_Error_Rate   0x0009   200   200   051    Pre-fail
Offline      -       0

# smartctl -Hc -d 3ware,0 /dev/twa0
smartctl version 5.37 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6
Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84)    Offline data collection activity
                    was suspended by an interrupting command from host.
                    Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)    The previous self-test
routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:          (10530) seconds.
Offline data collection
capabilities:              (0x7b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      ( 152) minutes.
Conveyance self-test routine
recommended polling time:      (   5) minutes.

smartctl -l selftest -d 3ware,0 /dev/twa0
smartctl version 5.37 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6
Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining
LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%
2         -

Please suggest/guide.

Thanks,

Kaushal