[Bug 1463046] Re: installation of multipath-tools-boot can break boot
Scott Moser
smoser at ubuntu.com
Fri Jun 12 15:29:44 UTC 2015
** Changed in: multipath-tools (Ubuntu)
Status: New => Confirmed
** Changed in: multipath-tools (Ubuntu)
Importance: Undecided => Medium
** Description changed:
installing multipath-tools-boot puts multipath code into initramfs.
This code can then cause failure to boot of what would otherwise be fine.
Note, this system does not have multipath , so it should not need this
package, but installation of the package should not break boot.
Here is what is the crux of the issue i think:
$ for d in /dev/sda /dev/sdb; do echo "$d:'$(sudo /lib/udev/scsi_id --whitelisted --device=$d)'"; done
/dev/sda:'35000c5001feb99f0'
/dev/sdb:'35000c5001feb99f0'
Those are *not* multipath devices, but appear as such to dm-multipath.
Related bugs:
* bug 1463043: some SM15K systems fail to boot after deployment - drop into initramfs shell
+ * bug 1462530: multipath errors on vivid and wily kernel?
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-35-generic (buildd at panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #62-Ubuntu SMP Fri Aug 15 01:58:42 UTC 2014 (Ubuntu 3.13.0-35.62-generic 3.13.11.6)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-35-generic root=UUID=1a50ebe5-c215-40e8-88ee-7348f02cb11e ro console=ttyS0,9600n8
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009cc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bef62fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bef63000-0x00000000bf162fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf163000-0x00000000bf5befff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf5bf000-0x00000000bf6befff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf6bf000-0x00000000bf7befff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf7bf000-0x00000000bf7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x440000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] init_memory_mapping: [mem 0x43fe00000-0x43fffffff]
[ 0.000000] init_memory_mapping: [mem 0x43c000000-0x43fdfffff]
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x43bffffff]
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbef62fff]
[ 0.000000] init_memory_mapping: [mem 0xbf163000-0xbf5befff]
[ 0.000000] init_memory_mapping: [mem 0xbf7ff000-0xbf7fffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] RAMDISK: [mem 0x35034000-0x36811fff]
[ 0.000000] ACPI: RSDP 00000000000fe020 000024 (v02 INSYDE)
[ 0.000000] ACPI: XSDT 00000000bf7fe120 000084 (v01 INSYDE IS CRB 00000003 01000013)
[ 0.000000] ACPI: FACP 00000000bf7fc000 00010C (v05 INSYDE IS CRB 00000003 ACPI 00040000)
[ 0.000000] ACPI: DSDT 00000000bf7f3000 004305 (v01 INSYDE IS CRB F0000000 ACPI 00040000)
[ 0.000000] ACPI: FACS 00000000bf79a000 000040
[ 0.000000] ACPI: UEFI 00000000bf7fd000 000236 (v01 INSYDE IS CRB 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 00000000bf7fb000 000038 (v01 INSYDE IS CRB 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 00000000bf7f9000 00003C (v01 INSYDE IS CRB 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 00000000bf7f8000 0000A5 (v32 INSYDE IS CRB 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 00000000bf7f2000 000028 (v01 INSYDE IS CRB 00000001 ACPI 00040000)
[ 0.000000] ACPI: SLIC 00000000bf7f1000 000176 (v01 INSYDE IS CRB 00000001 ACPI 00040000)
[ 0.000000] ACPI: SPCR 00000000bf7f0000 000050 (v01 INSYDE IS CRB 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 00000000bf7ee000 000044 (v01 INSYDE IS CRB 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 00000000bf7ec000 00009E (v01 INSYDE IS CRB 00000001 ACPI 00040000)
[ 0.000000] ACPI: SRAT 00000000bf7eb000 000128 (v02 AMD AGESA 00000001 AMD 00000001)
[ 0.000000] ACPI: SLIT 00000000bf7ea000 00002D (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.000000] SRAT: PXM 0 -> APIC 0x10 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x11 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x12 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x13 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x14 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x15 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x16 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x17 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x43fffffff]
[ 0.000000] ACPI: SLIT table looks invalid. Not used.
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x43fffffff] -> [mem 0x00000000-0x43fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x43fffffff]
[ 0.000000] NODE_DATA [mem 0x43fff9000-0x43fffdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x43fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009bfff]
[ 0.000000] node 0: [mem 0x00100000-0xbef62fff]
[ 0.000000] node 0: [mem 0xbf163000-0xbf5befff]
[ 0.000000] node 0: [mem 0xbf7ff000-0xbf7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x43fffffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x16] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x17] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xc0008000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 1, version 33, address 0xc0008000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x1002a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbef63000-0xbf162fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf5bf000-0xbf6befff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf6bf000-0xbf7befff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7bf000-0xbf7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb01000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88043fc00000 s86336 r8192 d24256 u262144
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4125559
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-35-generic root=UUID=1a50ebe5-c215-40e8-88ee-7348f02cb11e ro console=ttyS0,9600n8
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ b4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[ 0.000000] Memory: 16328524K/16764268K available (7372K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1440K bss, 435744K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] NR_IRQS:16640 nr_irqs:1288 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.004000] tsc: Fast TSC calibration using PIT
[ 0.008000] tsc: Detected 2000.168 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.33 BogoMIPS (lpj=8000672)
[ 0.127656] pid_max: default: 32768 minimum: 301
[ 0.183156] Security Framework initialized
[ 0.232380] AppArmor: AppArmor initialized
[ 0.281586] Yama: becoming mindful.
[ 0.325272] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.419527] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.508669] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.591336] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.679551] Initializing cgroup subsys memory
[ 0.731893] Initializing cgroup subsys devices
[ 0.785274] Initializing cgroup subsys freezer
[ 0.838654] Initializing cgroup subsys blkio
[ 0.889945] Initializing cgroup subsys perf_event
[ 0.946458] Initializing cgroup subsys hugetlb
[ 0.999863] CPU: Physical Processor ID: 0
[ 1.048020] CPU: Processor Core ID: 0
[ 1.091999] mce: CPU supports 7 MCE banks
[ 1.140164] LVT offset 0 assigned for vector 0xf9
[ 1.196686] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 1.196686] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 1.196686] tlb_flushall_shift: 5
[ 1.379703] Freeing SMP alternatives memory: 32K (ffffffff81e6d000 - ffffffff81e75000)
[ 1.476015] ACPI: Core revision 20131115
[ 1.525469] ACPI: All ACPI Tables successfully acquired
[ 1.589905] ftrace: allocating 28537 entries in 112 pages
[ 1.668679] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 1.780549] smpboot: CPU0: AMD Opteron(tm) Processor 4365 EE (fam: 15, model: 02, stepping: 00)
[ 1.992896] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 2.069582] ... version: 0
[ 2.117737] ... bit width: 48
[ 2.166934] ... generic registers: 6
[ 2.215092] ... value mask: 0000ffffffffffff
[ 2.278916] ... max period: 00007fffffffffff
[ 2.342737] ... fixed-purpose events: 0
[ 2.390890] ... event mask: 000000000000003f
[ 2.457093] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 2.553392] x86: Booting SMP configuration:
[ 2.603638] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 2.761210] x86: Booted up 1 node, 8 CPUs
[ 2.811561] smpboot: Total of 8 processors activated (32002.68 BogoMIPS)
[ 2.909363] devtmpfs: initialized
[ 2.954679] EVM: security.selinux
[ 2.994482] EVM: security.SMACK64
[ 3.034282] EVM: security.ima
[ 3.069905] EVM: security.capability
[ 3.112912] PM: Registering ACPI NVS region [mem 0xbef63000-0xbf162fff] (2097152 bytes)
[ 3.209171] PM: Registering ACPI NVS region [mem 0xbf6bf000-0xbf7befff] (1048576 bytes)
[ 3.306627] pinctrl core: initialized pinctrl subsystem
[ 3.369489] regulator-dummy: no parameters
[ 3.418723] RTC time: 12:41:00, date: 06/08/15
[ 3.472150] NET: Registered protocol family 16
[ 3.525686] cpuidle: using governor ladder
[ 3.574885] cpuidle: using governor menu
[ 3.622088] ACPI: bus type PCI registered
[ 3.670242] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 3.747730] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 3.859600] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 3.962795] PCI: Using configuration type 1 for base access
[ 4.031603] bio: create slab <bio-0> at 0
[ 4.080047] ACPI: Added _OSI(Module Device)
[ 4.130297] ACPI: Added _OSI(Processor Device)
[ 4.183674] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 4.240187] ACPI: Added _OSI(Processor Aggregator Device)
[ 4.307520] ACPI: Executed 1 blocks of module-level executable AML code
[ 4.389143] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 4.462354] ACPI: Interpreter enabled
[ 4.506338] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 4.617382] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 4.728426] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580)
[ 4.839466] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20131115/hwxface-580)
[ 4.950514] ACPI: (supports S0 S5)
[ 4.991357] ACPI: Using IOAPIC for interrupt routing
[ 5.051097] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 5.161042] ACPI: No dock devices found.
[ 5.216753] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 5.291024] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 5.389848] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 5.486540] PCI host bridge to bus 0000:00
[ 5.535744] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 5.601656] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 5.675923] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 5.750193] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 5.832823] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 5.915451] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 5.998076] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 6.080698] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 6.163323] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 6.245950] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 6.328574] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 6.411199] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 6.493822] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 6.576448] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 6.659074] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 6.741699] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 6.824323] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xf7ffffff]
[ 6.906949] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff]
[ 6.989574] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff]
[ 7.072499] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 7.140656] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 7.208820] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 7.276979] pci 0000:00:05.0: System wakeup disabled by ACPI
[ 7.345136] pci 0000:00:06.0: System wakeup disabled by ACPI
[ 7.413296] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 7.481453] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 7.549606] pci 0000:00:0a.0: System wakeup disabled by ACPI
[ 7.618116] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 7.692908] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 7.760906] pci 0000:00:03.0: PCI bridge to [bus 02]
[ 7.820648] acpiphp: Slot [1] registered
[ 7.872908] pci 0000:00:04.0: PCI bridge to [bus 03]
[ 7.940905] pci 0000:00:05.0: PCI bridge to [bus 04]
[ 8.008905] pci 0000:00:06.0: PCI bridge to [bus 05]
[ 8.076905] pci 0000:00:07.0: PCI bridge to [bus 06]
[ 8.144905] pci 0000:00:09.0: PCI bridge to [bus 07]
[ 8.212904] pci 0000:00:0a.0: PCI bridge to [bus 08]
[ 8.272652] pci 0000:00:14.4: PCI bridge to [bus 09] (subtractive decode)
[ 8.355015] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 8.452673] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 8.550345] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 8.647994] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 8.745662] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 8.843331] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 8.940999] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 9.038656] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 9.136399] ACPI: Enabled 3 GPEs in block 00 to 1F
[ 9.194354] vgaarb: loaded
[ 9.227087] SCSI subsystem initialized
[ 9.272207] ACPI: bus type USB registered
[ 9.320383] usbcore: registered new interface driver usbfs
[ 9.386305] usbcore: registered new interface driver hub
[ 9.450173] usbcore: registered new device driver usb
[ 9.511044] PCI: Using ACPI for IRQ routing
[ 9.570593] NetLabel: Initializing
[ 9.611438] NetLabel: domain hash size = 128
[ 9.663773] NetLabel: protocols = UNLABELED CIPSOv4
[ 9.723437] NetLabel: unlabeled traffic allowed by default
[ 9.790464] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 9.852731] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 9.924916] Switched to clocksource hpet
[ 9.980978] AppArmor: AppArmor Filesystem Enabled
[ 10.037513] pnp: PnP ACPI init
[ 10.074195] ACPI: bus type PNP registered
[ 10.122619] system 00:00: [mem 0xfea00000-0xfea01fff] has been reserved
[ 10.202119] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 10.281618] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 10.361114] system 00:00: [mem 0xc0008000-0xc0009fff] could not be reserved
[ 10.445239] system 00:06: [io 0x0400-0x04cf] could not be reserved
[ 10.520554] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 10.591697] system 00:06: [io 0x04d6] has been reserved
[ 10.655526] system 00:06: [io 0x0500-0x0507] has been reserved
[ 10.726664] system 00:06: [io 0x0680-0x06ff] has been reserved
[ 10.797804] system 00:06: [io 0x077a] has been reserved
[ 10.861636] system 00:06: [io 0x0c00-0x0c01] has been reserved
[ 10.932778] system 00:06: [io 0x0c14] has been reserved
[ 10.996610] system 00:06: [io 0x0c50-0x0c52] has been reserved
[ 11.067751] system 00:06: [io 0x0c6c] has been reserved
[ 11.131581] system 00:06: [io 0x0c6f] has been reserved
[ 11.195411] system 00:06: [io 0x0cd0-0x0cdb] has been reserved
[ 11.266555] system 00:06: [io 0x0e00-0x0e7f] has been reserved
[ 11.337806] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[ 11.421479] system 00:07: [mem 0xffc00000-0xffffffff] has been reserved
[ 11.501400] pnp: PnP ACPI: found 8 devices
[ 11.550606] ACPI: bus type PNP unregistered
[ 11.608047] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 11.667700] pci 0000:00:02.0: bridge window [io 0x9000-0x9fff]
[ 11.740934] pci 0000:00:02.0: bridge window [mem 0xc0900000-0xc09fffff]
[ 11.822520] pci 0000:00:03.0: PCI bridge to [bus 02]
[ 11.882170] pci 0000:00:03.0: bridge window [io 0x8000-0x8fff]
[ 11.955404] pci 0000:00:03.0: bridge window [mem 0xc0800000-0xc08fffff]
[ 12.036996] pci 0000:00:04.0: PCI bridge to [bus 03]
[ 12.096647] pci 0000:00:04.0: bridge window [io 0x7000-0x7fff]
[ 12.169874] pci 0000:00:04.0: bridge window [mem 0xc0700000-0xc07fffff]
[ 12.251461] pci 0000:00:05.0: PCI bridge to [bus 04]
[ 12.311113] pci 0000:00:05.0: bridge window [io 0x6000-0x6fff]
[ 12.384344] pci 0000:00:05.0: bridge window [mem 0xc0600000-0xc06fffff]
[ 12.465934] pci 0000:00:06.0: PCI bridge to [bus 05]
[ 12.525582] pci 0000:00:06.0: bridge window [io 0x5000-0x5fff]
[ 12.598809] pci 0000:00:06.0: bridge window [mem 0xc0500000-0xc05fffff]
[ 12.680396] pci 0000:00:07.0: PCI bridge to [bus 06]
[ 12.740047] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]
[ 12.813278] pci 0000:00:07.0: bridge window [mem 0xc0400000-0xc04fffff]
[ 12.894868] pci 0000:00:09.0: PCI bridge to [bus 07]
[ 12.954519] pci 0000:00:09.0: bridge window [io 0x3000-0x3fff]
[ 13.027752] pci 0000:00:09.0: bridge window [mem 0xc0300000-0xc03fffff]
[ 13.109341] pci 0000:00:0a.0: PCI bridge to [bus 08]
[ 13.168993] pci 0000:00:0a.0: bridge window [io 0x2000-0x2fff]
[ 13.242224] pci 0000:00:0a.0: bridge window [mem 0xc0200000-0xc02fffff]
[ 13.323812] pci 0000:00:14.4: PCI bridge to [bus 09]
[ 13.383462] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff]
[ 13.456911] NET: Registered protocol family 2
[ 13.509566] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 13.598899] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 13.679674] TCP: Hash tables configured (established 131072 bind 65536)
[ 13.759211] TCP: reno registered
[ 13.798008] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 13.871327] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 13.949935] NET: Registered protocol family 1
[ 14.002467] Trying to unpack rootfs image as initramfs...
[ 14.603607] Freeing initrd memory: 24440K (ffff880035034000 - ffff880036812000)
[ 14.691968] PCI-DMA: Disabling AGP.
[ 14.735828] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 14.802790] PCI-DMA: using GART IOMMU.
[ 14.847814] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 14.931251] Simple Boot Flag at 0x44 set to 0x1
[ 14.986041] perf: AMD NB counters detected
[ 15.035309] [Firmware Bug]: cpu 6, try to use APIC500 (LVT offset 0) for vector 0x10400, but the register is already in use for vector 0xf9 on another cpu
[ 15.201497] [Firmware Bug]: cpu 6, IBS interrupt offset 0 not available (MSRC001103A=0x0000000000000100)
[ 15.315459] Failed to setup IBS, -22
[ 15.358456] microcode: CPU0: patch_level=0x0600081c
[ 15.417061] microcode: CPU1: patch_level=0x0600081c
[ 15.475672] microcode: CPU2: patch_level=0x0600081c
[ 15.534283] microcode: CPU3: patch_level=0x0600081c
[ 15.592896] microcode: CPU4: patch_level=0x0600081c
[ 15.651502] microcode: CPU5: patch_level=0x0600081c
[ 15.710106] microcode: CPU6: patch_level=0x0600081c
[ 15.768715] microcode: CPU7: patch_level=0x0600081c
[ 15.827381] microcode: Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
[ 15.932989] Scanning for low memory corruption every 60 seconds
[ 16.004132] tsc: Refined TSC clocksource calibration: 2000.070 MHz
[ 16.078795] Initialise system trusted keyring
[ 16.131182] audit: initializing netlink socket (disabled)
[ 16.196072] type=2000 audit(1433767252.528:1): initialized
[ 16.296517] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 16.374889] zbud: loaded
[ 16.405479] VFS: Disk quotas dquot_6.5.2
[ 16.452646] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 16.530679] fuse init (API version 7.22)
[ 16.577905] msgmni has been set to 32068
[ 16.625094] Key type big_key registered
[ 16.671799] Key type asymmetric registered
[ 16.721003] Asymmetric key parser 'x509' registered
[ 16.779643] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 16.868609] io scheduler noop registered
[ 16.915725] io scheduler deadline registered (default)
[ 16.977493] io scheduler cfq registered
[ 17.023679] pcieport 0000:00:02.0: device [1002:5a16] has invalid IRQ; check vendor BIOS
[ 17.120954] Switched to clocksource tsc
[ 17.121180] pcieport 0000:00:03.0: device [1002:5a17] has invalid IRQ; check vendor BIOS
[ 17.121350] pcieport 0000:00:04.0: device [1002:5a18] has invalid IRQ; check vendor BIOS
[ 17.121518] pcieport 0000:00:05.0: device [1002:5a19] has invalid IRQ; check vendor BIOS
[ 17.121682] pcieport 0000:00:06.0: device [1002:5a1a] has invalid IRQ; check vendor BIOS
[ 17.121850] pcieport 0000:00:07.0: device [1002:5a1b] has invalid IRQ; check vendor BIOS
[ 17.122013] pcieport 0000:00:09.0: device [1002:5a1c] has invalid IRQ; check vendor BIOS
[ 17.122179] pcieport 0000:00:0a.0: device [1002:5a1d] has invalid IRQ; check vendor BIOS
[ 17.122383] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 17.122384] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 17.122386] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 17.122408] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
[ 17.122409] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 17.122410] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
[ 17.122434] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
[ 17.122435] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 17.122436] pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
[ 17.122458] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
[ 17.122460] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 17.122461] pci 0000:04:00.1: Signaling PME through PCIe PME interrupt
[ 17.122483] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
[ 17.122484] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 17.122486] pci 0000:05:00.1: Signaling PME through PCIe PME interrupt
[ 17.122509] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
[ 17.122510] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 17.122511] pci 0000:06:00.1: Signaling PME through PCIe PME interrupt
[ 17.122536] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
[ 17.122537] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
[ 17.122539] pci 0000:07:00.1: Signaling PME through PCIe PME interrupt
[ 17.122560] pcieport 0000:00:0a.0: Signaling PME through PCIe PME interrupt
[ 17.122562] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
[ 17.122563] pci 0000:08:00.1: Signaling PME through PCIe PME interrupt
[ 17.122582] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 17.122601] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 19.918592] efifb: probing for efifb
[ 19.961552] efifb: framebuffer at 0xa0000, mapped to 0xffff8800000a0000, using 64k, total 64k
[ 20.064025] efifb: mode is 640x480x1, linelength=80, pages=1
[ 20.132025] efifb: scrolling: redraw
[ 20.174957] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 20.245420] Console: switching to colour frame buffer device 80x30
[ 20.323151] fb0: EFI VGA frame buffer device
[ 20.374459] ipmi message handler version 39.2
[ 20.426872] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 20.525177] ACPI: Power Button [PWRB]
[ 20.569208] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 20.658104] ACPI: Power Button [PWRF]
[ 20.702396] GHES: HEST is not enabled!
[ 20.747528] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 20.844413] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 20.939152] Linux agpgart interface v0.103
[ 20.990095] brd: module loaded
[ 21.027660] loop: module loaded
[ 21.065891] libphy: Fixed MDIO Bus: probed
[ 21.115223] tun: Universal TUN/TAP device driver, 1.6
[ 21.175913] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[ 21.250284] PPP generic driver version 2.4.2
[ 21.301653] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 21.380111] ehci-pci: EHCI PCI platform driver
[ 21.433514] ehci-platform: EHCI generic platform driver
[ 21.496304] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 21.570573] ohci-pci: OHCI PCI platform driver
[ 21.623962] ohci-platform: OHCI generic platform driver
[ 21.686751] uhci_hcd: USB Universal Host Controller Interface driver
[ 21.763178] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 22.869644] i8042: No controller found
[ 22.914771] mousedev: PS/2 mouse device common for all mice
[ 22.981874] rtc_cmos 00:04: RTC can wake from S4
[ 23.037474] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 23.110731] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 23.202840] device-mapper: uevent: version 1.0.3
[ 23.258403] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel at redhat.com
[ 23.359839] ledtrig-cpu: registered to indicate activity on CPUs
[ 23.432147] TCP: cubic registered
[ 23.472071] NET: Registered protocol family 10
[ 23.525665] NET: Registered protocol family 17
[ 23.579049] Key type dns_resolver registered
[ 23.630893] Loading compiled-in X.509 certificates
[ 23.689722] Loaded X.509 cert 'Magrathea: Glacier signing key: b1414ae96c1b0ebb7c141fa405c1f6c98e8a66f0'
[ 23.803703] registered taskstats version 1
[ 23.855851] Key type trusted registered
[ 23.903926] Key type encrypted registered
[ 23.954176] AppArmor: AppArmor sha1 policy hashing enabled
[ 24.020094] IMA: No TPM chip found, activating TPM-bypass!
[ 24.086504] regulator-dummy: disabling
[ 24.131595] Magic number: 3:6:683
[ 24.173564] rtc_cmos 00:04: setting system clock to 2015-06-08 12:41:21 UTC (1433767281)
[ 24.270915] powernow-k8: This CPU is not supported anymore, using acpi-cpufreq instead.
[ 24.368152] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 24.440332] EDD information not available.
[ 24.491514] Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
[ 24.585631] Write protecting the kernel read-only data: 12288k
[ 24.660161] Freeing unused kernel memory: 808K (ffff880001736000 - ffff880001800000)
[ 24.756892] Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
Loading, please [ 24.867435] systemd-udevd[151]: starting version 204
wait...
[ 24.952831] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 25.037563] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 25.168900] device-mapper: multipath: version 1.6.0 loaded
[ 25.414207] e1000 0000:01:00.1 eth0: (PCI-X:33MHz:32-bit) 00:22:99:e0:00:07
[ 25.497888] e1000 0000:01:00.1 eth0: Intel(R) PRO/1000 Network Connection
[ 25.579811] ahci 0000:01:00.0: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
[ 25.679157] ahci 0000:01:00.0: flags: led clo only pio ccc
[ 25.746767] scsi0 : ahci
[ 25.777293] scsi1 : ahci
[ 25.807786] scsi2 : ahci
[ 25.838279] scsi3 : ahci
[ 25.868739] ata1: SATA max UDMA/133 abar m65536 at 0xc0920000 port 0xc0920100 irq 24
[ 25.878823] e1000 0000:02:00.1 eth1: (PCI-X:33MHz:32-bit) 00:22:99:e0:00:06
[ 25.878826] e1000 0000:02:00.1 eth1: Intel(R) PRO/1000 Network Connection
[ 26.123916] ata2: SATA max UDMA/133 abar m65536 at 0xc0920000 port 0xc0920180 irq 24
[ 26.162827] e1000 0000:03:00.1 eth2: (PCI-X:33MHz:32-bit) 00:22:99:e0:00:00
[ 26.162829] e1000 0000:03:00.1 eth2: Intel(R) PRO/1000 Network Connection
[ 26.379094] ata3: SATA max UDMA/133 abar m65536 at 0xc0920000 port 0xc0920200 irq 24
[ 26.462839] e1000 0000:04:00.1 eth3: (PCI-X:33MHz:32-bit) 00:22:99:e0:00:01
[ 26.462841] e1000 0000:04:00.1 eth3: Intel(R) PRO/1000 Network Connection
[ 26.634281] ata4: SATA max UDMA/133 abar m65536 at 0xc0920000 port 0xc0920280 irq 24
[ 26.724452] ahci 0000:02:00.0: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
[ 26.762866] e1000 0000:05:00.1 eth4: (PCI-X:33MHz:32-bit) 00:22:99:e0:00:02
[ 26.762869] e1000 0000:05:00.1 eth4: Intel(R) PRO/1000 Network Connection
[ 26.989040] ahci 0000:02:00.0: flags: led clo only pio ccc
[ 27.041584] ata3: SATA link down (SStatus 0 SControl 300)
[ 27.041652] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 27.041709] ata4: SATA link down (SStatus 0 SControl 300)
[ 27.041773] ata2: SATA link down (SStatus 0 SControl 300)
[ 27.041870] ata1.00: failed to read native max address (err_mask=0x1)
[ 27.041871] ata1.00: HPA support seems broken, skipping HPA handling
[ 27.041874] ata1.00: ATA-8: SMvDi02lGylQfF1qfjGL9Go6, 0001, max UDMA/133
[ 27.041876] ata1.00: 419430400 sectors, multi 16: LBA48
[ 27.042006] ata1.00: configured for UDMA/133
[ 27.042173] scsi 0:0:0:0: Direct-Access ATA SMvDi02lGylQfF1q 0001 PQ: 0 ANSI: 5
[ 27.042334] sd 0:0:0:0: [sda] 419430400 512-byte logical blocks: (214 GB/200 GiB)
[ 27.042380] sd 0:0:0:0: [sda] Write Protect is off
[ 27.042392] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 27.042402] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 27.043027] sda: sda1
[ 27.043248] sd 0:0:0:0: [sda] Attached SCSI disk
[ 27.062863] e1000 0000:06:00.1 eth5: (PCI-X:33MHz:32-bit) 00:22:99:e0:00:03
[ 27.062865] e1000 0000:06:00.1 eth5: Intel(R) PRO/1000 Network Connection
[ 27.362879] e1000 0000:07:00.1 eth6: (PCI-X:33MHz:32-bit) 00:22:99:e0:00:04
[ 27.362881] e1000 0000:07:00.1 eth6: Intel(R) PRO/1000 Network Connection
[ 27.662873] e1000 0000:08:00.1 eth7: (PCI-X:33MHz:32-bit) 00:22:99:e0:00:05
[ 27.662875] e1000 0000:08:00.1 eth7: Intel(R) PRO/1000 Network Connection
[ 28.672787] scsi4 : ahci
[ 28.703312] scsi5 : ahci
[ 28.733838] scsi6 : ahci
[ 28.764339] scsi7 : ahci
[ 28.794826] ata5: SATA max UDMA/133 abar m65536 at 0xc0820000 port 0xc0820100 irq 28
[ 28.884770] ata6: SATA max UDMA/133 abar m65536 at 0xc0820000 port 0xc0820180 irq 28
[ 28.974716] ata7: SATA max UDMA/133 abar m65536 at 0xc0820000 port 0xc0820200 irq 28
[ 29.064659] ata8: SATA max UDMA/133 abar m65536 at 0xc0820000 port 0xc0820280 irq 28
[ 29.154836] ahci 0000:03:00.0: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
[ 29.254177] ahci 0000:03:00.0: flags: led clo only pio ccc
[ 29.321816] scsi8 : ahci
[ 29.352321] scsi9 : ahci
[ 29.382827] scsi10 : ahci
[ 29.414384] scsi11 : ahci
[ 29.445908] ata9: SATA max UDMA/133 abar m65536 at 0xc0720000 port 0xc0720100 irq 44
[ 29.469662] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 29.469835] ata5.00: failed to read native max address (err_mask=0x1)
[ 29.469836] ata5.00: HPA support seems broken, skipping HPA handling
[ 29.469839] ata5.00: ATA-8: SMvDkoWziOynRqDDMpLqadMA, 0001, max UDMA/133
[ 29.469841] ata5.00: 419430400 sectors, multi 16: LBA48
[ 29.469978] ata5.00: configured for UDMA/133
[ 29.470147] scsi 4:0:0:0: Direct-Access ATA SMvDkoWziOynRqDD 0001 PQ: 0 ANSI: 5
[ 29.470324] sd 4:0:0:0: [sdb] 419430400 512-byte logical blocks: (214 GB/200 GiB)
[ 29.470366] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 29.470433] sd 4:0:0:0: [sdb] Write Protect is off
[ 29.470473] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 29.471815] sdb: unknown partition table
[ 29.472057] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 29.577673] ata6: SATA link down (SStatus 0 SControl 300)
[ 29.577732] ata8: SATA link down (SStatus 0 SControl 300)
[ 29.577792] ata7: SATA link down (SStatus 0 SControl 300)
[ 30.674972] ata10: SATA max UDMA/133 abar m65536 at 0xc0720000 port 0xc0720180 irq 44
[ 30.765955] ata11: SATA max UDMA/133 abar m65536 at 0xc0720000 port 0xc0720200 irq 44
[ 30.856946] ata12: SATA max UDMA/133 abar m65536 at 0xc0720000 port 0xc0720280 irq 44
[ 30.948182] ahci 0000:04:00.0: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
[ 31.047534] ahci 0000:04:00.0: flags: led clo only pio ccc
[ 31.115179] scsi12 : ahci
[ 31.146723] scsi13 : ahci
[ 31.178267] scsi14 : ahci
[ 31.209809] scsi15 : ahci
[ 31.241314] ata13: SATA max UDMA/133 abar m65536 at 0xc0620000 port 0xc0620100 irq 46
[ 31.265728] ata11: SATA link down (SStatus 0 SControl 300)
[ 31.265788] ata9: SATA link down (SStatus 0 SControl 300)
[ 31.265845] ata10: SATA link down (SStatus 0 SControl 300)
[ 31.265901] ata12: SATA link down (SStatus 0 SControl 300)
[ 31.594880] ata14: SATA max UDMA/133 abar m65536 at 0xc0620000 port 0xc0620180 irq 46
[ 31.685858] ata15: SATA max UDMA/133 abar m65536 at 0xc0620000 port 0xc0620200 irq 46
[ 31.776840] ata16: SATA max UDMA/133 abar m65536 at 0xc0620000 port 0xc0620280 irq 46
[ 31.868018] ahci 0000:05:00.0: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
[ 31.967356] ahci 0000:05:00.0: flags: led clo only pio ccc
[ 32.034990] scsi16 : ahci
[ 32.066546] scsi17 : ahci
[ 32.098096] scsi18 : ahci
[ 32.129634] scsi19 : ahci
[ 32.161140] ata17: SATA max UDMA/133 abar m65536 at 0xc0520000 port 0xc0520100 irq 51
[ 32.185759] ata14: SATA link down (SStatus 0 SControl 300)
[ 32.185818] ata15: SATA link down (SStatus 0 SControl 300)
[ 32.185876] ata13: SATA link down (SStatus 0 SControl 300)
[ 32.185933] ata16: SATA link down (SStatus 0 SControl 300)
[ 32.515755] ata18: SATA max UDMA/133 abar m65536 at 0xc0520000 port 0xc0520180 irq 51
[ 32.606741] ata19: SATA max UDMA/133 abar m65536 at 0xc0520000 port 0xc0520200 irq 51
[ 32.697728] ata20: SATA max UDMA/133 abar m65536 at 0xc0520000 port 0xc0520280 irq 51
[ 32.788940] ahci 0000:06:00.0: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
[ 32.888290] ahci 0000:06:00.0: flags: led clo only pio ccc
[ 32.955928] scsi20 : ahci
[ 32.987480] scsi21 : ahci
[ 33.019023] scsi22 : ahci
[ 33.050564] scsi23 : ahci
[ 33.082062] ata21: SATA max UDMA/133 abar m65536 at 0xc0420000 port 0xc0420100 irq 50
[ 33.105791] ata19: SATA link down (SStatus 0 SControl 300)
[ 33.105849] ata17: SATA link down (SStatus 0 SControl 300)
[ 33.105908] ata18: SATA link down (SStatus 0 SControl 300)
[ 33.105965] ata20: SATA link down (SStatus 0 SControl 300)
[ 33.436672] ata22: SATA max UDMA/133 abar m65536 at 0xc0420000 port 0xc0420180 irq 50
[ 33.527655] ata23: SATA max UDMA/133 abar m65536 at 0xc0420000 port 0xc0420200 irq 50
[ 33.618637] ata24: SATA max UDMA/133 abar m65536 at 0xc0420000 port 0xc0420280 irq 50
[ 33.709817] ahci 0000:07:00.0: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
[ 33.809159] ahci 0000:07:00.0: flags: led clo only pio ccc
[ 33.876786] scsi24 : ahci
[ 33.908324] scsi25 : ahci
[ 33.939865] scsi26 : ahci
[ 33.971405] scsi27 : ahci
[ 34.002911] ata25: SATA max UDMA/133 abar m65536 at 0xc0320000 port 0xc0320100 irq 48
[ 34.025820] ata21: SATA link down (SStatus 0 SControl 300)
[ 34.025878] ata22: SATA link down (SStatus 0 SControl 300)
[ 34.025935] ata23: SATA link down (SStatus 0 SControl 300)
[ 34.025992] ata24: SATA link down (SStatus 0 SControl 300)
[ 34.357523] ata26: SATA max UDMA/133 abar m65536 at 0xc0320000 port 0xc0320180 irq 48
[ 34.448502] ata27: SATA max UDMA/133 abar m65536 at 0xc0320000 port 0xc0320200 irq 48
[ 34.539484] ata28: SATA max UDMA/133 abar m65536 at 0xc0320000 port 0xc0320280 irq 48
[ 34.630668] ahci 0000:08:00.0: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
[ 34.730014] ahci 0000:08:00.0: flags: led clo only pio ccc
[ 34.797667] scsi28 : ahci
[ 34.829211] scsi29 : ahci
[ 34.860755] scsi30 : ahci
[ 34.892294] scsi31 : ahci
[ 34.923796] ata29: SATA max UDMA/133 abar m65536 at 0xc0220000 port 0xc0220100 irq 47
[ 34.949857] ata26: SATA link down (SStatus 0 SControl 300)
[ 34.949913] ata28: SATA link down (SStatus 0 SControl 300)
[ 34.949970] ata25: SATA link down (SStatus 0 SControl 300)
[ 34.950027] ata27: SATA link down (SStatus 0 SControl 300)
[ 35.278415] ata30: SATA max UDMA/133 abar m65536 at 0xc0220000 port 0xc0220180 irq 47
[ 35.369398] ata31: SATA max UDMA/133 abar m65536 at 0xc0220000 port 0xc0220200 irq 47
[ 35.460387] ata32: SATA max UDMA/133 abar m65536 at 0xc0220000 port 0xc0220280 irq 47
[ 35.869878] ata30: SATA link down (SStatus 0 SControl 300)
[ 35.935835] ata31: SATA link down (SStatus 0 SControl 300)
[ 36.001793] ata29: SATA link down (SStatus 0 SControl 300)
[ 36.067756] ata32: SATA link down (SStatus 0 SControl 300)
[ 36.181302] random: multipath urandom read with 65 bits of entropy available
[ 36.268977] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 36.347679] bio: create slab <bio-1> at 1
Begin: Loading essential drivers[ 37.565238] random: nonblocking pool is initialized
... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting r[ 37.703712] hidraw: raw HID events driver (C) Jiri Kosina
oot file system [ 37.780349] usbcore: registered new interface driver usbhid
... Begin: Runni[ 37.861532] usbhid: USB HID core driver
ng /scripts/local-top ... Begin: Loading multipath modules ... Success: loaded module dm-multipath.
Failure: failed to load module dm-emc.
done.
Begin: Waiting for scsi storage ... done.
Begin: Discovering multipaths ... done.
done.
Begin: Running /scripts/local-premount ... done.
mount: mounting /dev/disk/by-uuid/1a50ebe5-c215-40e8-88ee-7348f02cb11e on /root failed: Device or resource busy
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... mount: mounting /dev on /root/dev failed: No such file or directory
done.
mount: mounting /sys on /root/sys failed: No such file or directory
mount: mounting /proc on /root/proc failed: No such file or directory
Target filesystem doesn't have requested /sbin/init.
No init found. Try passing init= bootarg.
BusyBox v1.21.1 (Ubuntu 1:1.21.0-1ubuntu1) built-in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs)
ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: multipath-tools 0.4.9-3ubuntu7.2
ProcVersionSignature: User Name 3.13.0-35.62-generic 3.13.11.6
Uname: Linux 3.13.0-35-generic x86_64
ApportVersion: 2.14.1-0ubuntu3.4
Architecture: amd64
Date: Mon Jun 8 14:06:45 2015
ProcEnviron:
TERM=screen
PATH=(custom, no user)
XDG_RUNTIME_DIR=<set>
LANG=en_US.UTF-8
SHELL=/bin/bash
SourcePackage: multipath-tools
UpgradeStatus: No upgrade log present (probably fresh install)
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to multipath-tools in Ubuntu.
https://bugs.launchpad.net/bugs/1463046
Title:
installation of multipath-tools-boot can break boot
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/multipath-tools/+bug/1463046/+subscriptions
More information about the Ubuntu-server-bugs
mailing list