[Bug 1020436] [NEW] Multiple filesystems cannot read superblock after fibre path failover
Steve Fisher
stefan.nicolaivic at gmail.com
Tue Jul 3 07:18:06 UTC 2012
Public bug reported:
This might not be multipath-tools, but it's the likeliest candidate.
If fibre channel connectivity is disrupted on an active path, I can see
the multipath daemon rejuggling active paths as expected. However
instead of utilising a new path, the server continues trying active i/o
down the same path until it fails, and the superblock on the lun is
marked unreadable.
The luns simply cannot be remounted even after the paths are recovered.
However, after a simple reboot, the luns are again readable _regardless_
of the visible path. (Eg I shut the active FC port then rebooted, and
the storage was mountable per normal over a different path).
I've replicated this behaviour using both xfs and ext4 filesystems, on
multiple different luns presented to the server.
The luns are visible over four FC paths, and the /dev/mapper/mpathX
identity is used as the physical volume for an LVM2 volume group, into
which the logical volume(s) and filesystem are created.
root@<host>:~# lsb_release -rd
Description: Ubuntu 10.04.3 LTS
Release: 10.04
As you can see here, the /dev/test and /dev/test2 volume groups are both
active, yet showing i/o errors after a pathing fail.
root@<host>:~# lvscan
/dev/test2/lvol0: read failed after 0 of 4096 at 0: Input/output error
/dev/test/lvol0: read failed after 0 of 4096 at 0: Input/output error
ACTIVE '/dev/test2/lvol0' [4.00 GiB] inherit
ACTIVE '/dev/test/lvol0' [4.00 GiB] inherit
ACTIVE '/dev/mvsan/san' [500.00 GiB] inherit
root@<host>:~# pvscan
/dev/test2/lvol0: read failed after 0 of 4096 at 4290707456: Input/output error
/dev/test2/lvol0: read failed after 0 of 4096 at 4290764800: Input/output error
/dev/test2/lvol0: read failed after 0 of 4096 at 0: Input/output error
/dev/test2/lvol0: read failed after 0 of 4096 at 4096: Input/output error
/dev/test2/lvol0: read failed after 0 of 4096 at 0: Input/output error
/dev/test/lvol0: read failed after 0 of 4096 at 4290707456: Input/output error
/dev/test/lvol0: read failed after 0 of 4096 at 4290764800: Input/output error
/dev/test/lvol0: read failed after 0 of 4096 at 0: Input/output error
/dev/test/lvol0: read failed after 0 of 4096 at 4096: Input/output error
/dev/test/lvol0: read failed after 0 of 4096 at 0: Input/output error
PV /dev/mapper/mpath2 VG test2 lvm2 [4.00 GiB / 0 free]
PV /dev/mapper/mpath1 VG test lvm2 [4.00 GiB / 0 free]
PV /dev/mapper/mpath0 VG mvsan lvm2 [500.00 GiB / 0 free]
root@<host>:~# multipath -ll
mpath2 (360060e80058a070000008a0700000023) dm-7 HITACHI ,OPEN-V
[size=4.0G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=4][active]
\_ 6:0:0:2 sdd 8:48 [active][ready]
\_ 6:0:1:2 sdg 8:96 [active][ready]
\_ 7:0:0:2 sdj 8:144 [active][ready]
\_ 7:0:1:2 sdp 8:240 [active][ready]
mpath1 (360060e80058a070000008a070000000e) dm-6 HITACHI ,OPEN-V
[size=4.0G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=4][active]
\_ 6:0:0:1 sdc 8:32 [active][ready]
\_ 6:0:1:1 sdf 8:80 [active][ready]
\_ 7:0:0:1 sdi 8:128 [active][ready]
\_ 7:0:1:1 sdo 8:224 [active][ready]
mpath0 (360060e80058a070000008a0700002417) dm-5 HITACHI ,OPEN-V
[size=500G][features=1 queue_if_no_path][hwhandler=0]
\_ round-robin 0 [prio=4][active]
\_ 6:0:0:0 sdb 8:16 [active][ready]
\_ 6:0:1:0 sde 8:64 [active][ready]
\_ 7:0:0:0 sdh 8:112 [active][ready]
\_ 7:0:1:0 sdk 8:160 [active][ready]
The dmesg output is very instructive, but still doesn't help with the
root cause per se. I set the scsi-timeouts nice and high (90 seconds)
to accommodate any potential delays in path failover. The path checks
(test unit ready/TUR) occur about every 20 seconds.
See below:
[ 2192.891962] qla2xxx 0000:24:00.0: LOOP DOWN detected (2 3 0).
[ 2222.820850] rport-7:0-0: blocked FC remote port time out: removing target and saving binding
[ 2222.821297] rport-7:0-1: blocked FC remote port time out: removing target and saving binding
[ 2222.827286] device-mapper: multipath: Failing path 8:112.
[ 2222.827369] device-mapper: multipath: Failing path 8:160.
So this is all as expected.
Then:
[ 2222.924665] sd 7:0:0:0: [sdh] Synchronizing SCSI cache
[ 2222.924696] sd 7:0:0:0: [sdh] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2222.926071] device-mapper: multipath: Failing path 8:160.
[ 2222.976444] sd 7:0:1:2: [sdm] Unhandled error code
[ 2222.976446] sd 7:0:1:2: [sdm] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2222.976449] sd 7:0:1:2: [sdm] CDB: Read(10): 28 00 00 7f e1 00 00 00 01 00
[ 2222.976455] end_request: I/O error, dev sdm, sector 8380672
[ 2222.980258] sd 7:0:1:2: [sdm] Unhandled error code
[ 2222.980260] sd 7:0:1:2: [sdm] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2222.980262] sd 7:0:1:2: [sdm] CDB: Read(10): 28 00 00 7f e1 70 00 00 01 00
[ 2222.980267] end_request: I/O error, dev sdm, sector 8380784
[ 2222.984139] sd 7:0:1:2: [sdm] Unhandled error code
[ 2222.984141] sd 7:0:1:2: [sdm] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2222.984142] sd 7:0:1:2: [sdm] CDB: Read(10): 28 00 00 00 01 80 00 00 01 00
[ 2222.984147] end_request: I/O error, dev sdm, sector 384
[ 2222.988137] sd 7:0:1:2: [sdm] Unhandled error code
[ 2222.988139] sd 7:0:1:2: [sdm] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2222.988141] sd 7:0:1:2: [sdm] CDB: Read(10): 28 00 00 00 01 88 00 00 01 00
[ 2222.988145] end_request: I/O error, dev sdm, sector 392
[ 2222.992274] sd 7:0:1:2: [sdm] Unhandled error code
[ 2222.992276] sd 7:0:1:2: [sdm] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2222.992278] sd 7:0:1:2: [sdm] CDB: Read(10): 28 00 00 00 01 80 00 00 04 00
[ 2222.992282] end_request: I/O error, dev sdm, sector 384
[ 2222.996583] sd 7:0:1:1: [sdl] Unhandled error code
[ 2222.996585] sd 7:0:1:1: [sdl] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2222.996587] sd 7:0:1:1: [sdl] CDB: Read(10): 28 00 00 7f e1 00 00 00 08 00
[ 2222.996592] end_request: I/O error, dev sdl, sector 8380672
[ 2223.000980] sd 7:0:1:1: [sdl] Unhandled error code
[ 2223.000983] sd 7:0:1:1: [sdl] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.000985] sd 7:0:1:1: [sdl] CDB: Read(10): 28 00 00 7f e1 70 00 00 08 00
[ 2223.000992] end_request: I/O error, dev sdl, sector 8380784
[ 2223.005571] sd 7:0:1:1: [sdl] Unhandled error code
[ 2223.005573] sd 7:0:1:1: [sdl] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.005576] sd 7:0:1:1: [sdl] CDB: Read(10): 28 00 00 00 01 80 00 00 08 00
[ 2223.005583] end_request: I/O error, dev sdl, sector 384
[ 2223.010258] sd 7:0:1:1: [sdl] Unhandled error code
[ 2223.010260] sd 7:0:1:1: [sdl] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.010263] sd 7:0:1:1: [sdl] CDB: Read(10): 28 00 00 00 01 88 00 00 08 00
[ 2223.010269] end_request: I/O error, dev sdl, sector 392
[ 2223.015062] sd 7:0:1:1: [sdl] Unhandled error code
[ 2223.015065] sd 7:0:1:1: [sdl] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.015068] sd 7:0:1:1: [sdl] CDB: Read(10): 28 00 00 00 01 80 00 00 08 00
[ 2223.015072] end_request: I/O error, dev sdl, sector 384
[ 2223.046324] sd 7:0:0:2: [sdj] Unhandled error code
[ 2223.046325] sd 7:0:0:2: [sdj] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.046328] sd 7:0:0:2: [sdj] CDB: Read(10): 28 00 00 7f ff 80 00 00 08 00
[ 2223.046333] end_request: I/O error, dev sdj, sector 8388480
[ 2223.051339] sd 7:0:0:2: [sdj] Unhandled error code
[ 2223.051341] sd 7:0:0:2: [sdj] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.051343] sd 7:0:0:2: [sdj] CDB: Read(10): 28 00 00 7f ff f0 00 00 08 00
[ 2223.051347] end_request: I/O error, dev sdj, sector 8388592
[ 2223.051841] sd 7:0:0:1: [sdi] Synchronizing SCSI cache
[ 2223.051868] sd 7:0:0:1: [sdi] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.056574] sd 7:0:1:0: [sdk] Unhandled error code
[ 2223.056576] sd 7:0:1:0: [sdk] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.056578] sd 7:0:1:0: [sdk] CDB: Read(10): 28 00 3e 7f ff 80 00 00 08 00
[ 2223.056583] end_request: I/O error, dev sdk, sector 1048575872
[ 2223.061961] sd 7:0:1:0: [sdk] Unhandled error code
[ 2223.061962] sd 7:0:1:0: [sdk] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.061964] sd 7:0:1:0: [sdk] CDB: Read(10): 28 00 3e 7f ff f0 00 00 08 00
[ 2223.061969] end_request: I/O error, dev sdk, sector 1048575984
[ 2223.067450] sd 7:0:1:0: [sdk] Unhandled error code
[ 2223.067453] sd 7:0:1:0: [sdk] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.067456] sd 7:0:1:0: [sdk] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2223.067462] end_request: I/O error, dev sdk, sector 0
[ 2223.073081] sd 7:0:1:0: [sdk] Unhandled error code
[ 2223.073083] sd 7:0:1:0: [sdk] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.073085] sd 7:0:1:0: [sdk] CDB: Read(10): 28 00 00 00 00 08 00 00 08 00
[ 2223.073089] end_request: I/O error, dev sdk, sector 8
[ 2223.078824] sd 7:0:1:0: [sdk] Unhandled error code
[ 2223.078825] sd 7:0:1:0: [sdk] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.078827] sd 7:0:1:0: [sdk] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2223.078832] end_request: I/O error, dev sdk, sector 0
[ 2223.084675] sd 7:0:1:1: [sdl] Unhandled error code
[ 2223.084677] sd 7:0:1:1: [sdl] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.084679] sd 7:0:1:1: [sdl] CDB: Read(10): 28 00 00 7f ff 80 00 00 08 00
[ 2223.084683] end_request: I/O error, dev sdl, sector 8388480
[ 2223.090671] sd 7:0:1:1: [sdl] Unhandled error code
[ 2223.090672] sd 7:0:1:1: [sdl] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.090674] sd 7:0:1:1: [sdl] CDB: Read(10): 28 00 00 7f ff f0 00 00 08 00
[ 2223.090679] end_request: I/O error, dev sdl, sector 8388592
[ 2223.096830] sd 7:0:1:1: [sdl] Unhandled error code
[ 2223.096832] sd 7:0:1:1: [sdl] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.096834] sd 7:0:1:1: [sdl] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2223.096838] end_request: I/O error, dev sdl, sector 0
[ 2223.103075] sd 7:0:1:1: [sdl] Unhandled error code
[ 2223.103077] sd 7:0:1:1: [sdl] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.103079] sd 7:0:1:1: [sdl] CDB: Read(10): 28 00 00 00 00 08 00 00 08 00
[ 2223.103083] end_request: I/O error, dev sdl, sector 8
[ 2223.109441] sd 7:0:1:1: [sdl] Unhandled error code
[ 2223.109444] sd 7:0:1:1: [sdl] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.109446] sd 7:0:1:1: [sdl] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2223.109453] end_request: I/O error, dev sdl, sector 0
[ 2223.115922] sd 7:0:1:2: [sdm] Unhandled error code
[ 2223.115924] sd 7:0:1:2: [sdm] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.115926] sd 7:0:1:2: [sdm] CDB: Read(10): 28 00 00 7f ff 80 00 00 08 00
[ 2223.115930] end_request: I/O error, dev sdm, sector 8388480
[ 2223.122543] sd 7:0:1:2: [sdm] Unhandled error code
[ 2223.122545] sd 7:0:1:2: [sdm] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.122547] sd 7:0:1:2: [sdm] CDB: Read(10): 28 00 00 7f ff f0 00 00 08 00
[ 2223.122551] end_request: I/O error, dev sdm, sector 8388592
[ 2223.128957] sd 7:0:1:2: [sdm] Unhandled error code
[ 2223.128959] sd 7:0:1:2: [sdm] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.128961] sd 7:0:1:2: [sdm] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2223.128965] end_request: I/O error, dev sdm, sector 0
[ 2223.135176] sd 7:0:1:2: [sdm] Unhandled error code
[ 2223.135178] sd 7:0:1:2: [sdm] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.135180] sd 7:0:1:2: [sdm] CDB: Read(10): 28 00 00 00 00 08 00 00 08 00
[ 2223.135185] end_request: I/O error, dev sdm, sector 8
[ 2223.140962] sd 7:0:1:2: [sdm] Unhandled error code
[ 2223.140964] sd 7:0:1:2: [sdm] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.140965] sd 7:0:1:2: [sdm] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2223.140970] end_request: I/O error, dev sdm, sector 0
[ 2223.164023] sd 7:0:0:2: [sdj] Synchronizing SCSI cache
[ 2223.164050] sd 7:0:0:2: [sdj] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.178664] sd 7:0:1:2: [sdm] Unhandled error code
[ 2223.178666] sd 7:0:1:2: [sdm] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.178668] sd 7:0:1:2: [sdm] CDB: Read(10): 28 00 00 00 01 80 00 00 04 00
[ 2223.178673] end_request: I/O error, dev sdm, sector 384
[ 2223.183803] sd 7:0:1:1: [sdl] Unhandled error code
[ 2223.183805] sd 7:0:1:1: [sdl] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.183807] sd 7:0:1:1: [sdl] CDB: Read(10): 28 00 00 00 01 80 00 00 08 00
[ 2223.183812] end_request: I/O error, dev sdl, sector 384
[ 2223.191271] sd 7:0:1:1: [sdl] Unhandled error code
[ 2223.191273] sd 7:0:1:1: [sdl] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.191275] sd 7:0:1:1: [sdl] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2223.191280] end_request: I/O error, dev sdl, sector 0
[ 2223.195433] sd 7:0:1:2: [sdm] Unhandled error code
[ 2223.195435] sd 7:0:1:2: [sdm] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.195438] sd 7:0:1:2: [sdm] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2223.195444] end_request: I/O error, dev sdm, sector 0
[ 2223.236558] sd 7:0:1:2: [sdm] Unhandled error code
[ 2223.236560] sd 7:0:1:2: [sdm] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.236563] sd 7:0:1:2: [sdm] CDB: Read(10): 28 00 00 7f e1 00 00 00 01 00
[ 2223.236568] end_request: I/O error, dev sdm, sector 8380672
[ 2223.240754] sd 7:0:1:2: [sdm] Unhandled error code
[ 2223.240756] sd 7:0:1:2: [sdm] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.240758] sd 7:0:1:2: [sdm] CDB: Read(10): 28 00 00 7f e1 70 00 00 01 00
[ 2223.240763] end_request: I/O error, dev sdm, sector 8380784
[ 2223.241440] sd 7:0:1:0: [sdk] Synchronizing SCSI cache
[ 2223.241531] sd 7:0:1:0: [sdk] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.244982] sd 7:0:1:2: [sdm] Unhandled error code
[ 2223.244984] sd 7:0:1:2: [sdm] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.244986] sd 7:0:1:2: [sdm] CDB: Read(10): 28 00 00 00 01 80 00 00 01 00
[ 2223.244991] end_request: I/O error, dev sdm, sector 384
[ 2223.249170] sd 7:0:1:2: [sdm] Unhandled error code
[ 2223.249173] sd 7:0:1:2: [sdm] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.249176] sd 7:0:1:2: [sdm] CDB: Read(10): 28 00 00 00 01 88 00 00 01 00
[ 2223.249183] end_request: I/O error, dev sdm, sector 392
[ 2223.253313] sd 7:0:1:2: [sdm] Unhandled error code
[ 2223.253315] sd 7:0:1:2: [sdm] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.253318] sd 7:0:1:2: [sdm] CDB: Read(10): 28 00 00 00 01 80 00 00 04 00
[ 2223.253325] end_request: I/O error, dev sdm, sector 384
[ 2223.270352] sd 7:0:1:2: [sdm] Unhandled error code
[ 2223.270355] sd 7:0:1:2: [sdm] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.270359] sd 7:0:1:2: [sdm] CDB: Read(10): 28 00 00 7f ff 80 00 00 08 00
[ 2223.270366] end_request: I/O error, dev sdm, sector 8388480
[ 2223.274548] sd 7:0:1:2: [sdm] Unhandled error code
[ 2223.274550] sd 7:0:1:2: [sdm] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.274552] sd 7:0:1:2: [sdm] CDB: Read(10): 28 00 00 7f ff f0 00 00 08 00
[ 2223.274557] end_request: I/O error, dev sdm, sector 8388592
[ 2223.278653] sd 7:0:1:2: [sdm] Unhandled error code
[ 2223.278654] sd 7:0:1:2: [sdm] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.278656] sd 7:0:1:2: [sdm] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2223.278661] end_request: I/O error, dev sdm, sector 0
[ 2223.282759] sd 7:0:1:2: [sdm] Unhandled error code
[ 2223.282760] sd 7:0:1:2: [sdm] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.282762] sd 7:0:1:2: [sdm] CDB: Read(10): 28 00 00 00 00 08 00 00 08 00
[ 2223.282767] end_request: I/O error, dev sdm, sector 8
[ 2223.286863] sd 7:0:1:2: [sdm] Unhandled error code
[ 2223.286865] sd 7:0:1:2: [sdm] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.286867] sd 7:0:1:2: [sdm] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2223.286872] end_request: I/O error, dev sdm, sector 0
[ 2223.321219] sd 7:0:1:2: [sdm] Unhandled error code
[ 2223.321221] sd 7:0:1:2: [sdm] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.321223] sd 7:0:1:2: [sdm] CDB: Read(10): 28 00 00 00 01 80 00 00 04 00
[ 2223.321229] end_request: I/O error, dev sdm, sector 384
[ 2223.321231] sd 7:0:1:1: [sdl] Synchronizing SCSI cache
[ 2223.321261] sd 7:0:1:1: [sdl] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2223.443319] sd 7:0:1:2: [sdm] Synchronizing SCSI cache
[ 2223.443351] sd 7:0:1:2: [sdm] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
And then:
[ 2241.094148] Aborting journal on device dm-3-8.
[ 2241.098327] __ratelimit: 24 callbacks suppressed
[ 2241.098330] Buffer I/O error on device dm-3, logical block 458752
[ 2241.102730] lost page write due to I/O error on dm-3
[ 2241.102743] JBD2: I/O error detected when updating journal superblock for dm-3-8.
[ 2265.843946] EXT4-fs error (device dm-3): ext4_journal_start_sb: Detected aborted journal
[ 2265.855469] EXT4-fs (dm-3): Remounting filesystem read-only
[ 2280.676139] I/O error in filesystem ("dm-2") meta-data dev dm-2 block 0x18 ("xfs_trans_read_buf") error 5 buf count 4096
This is very disturbing as it means that the multipathing is not in fact
working at all - You can see that the I/O errors are pointing at 'dm-3'
rather than the mpath associated device, but thats normal as the logical
volume appears in that place.
The filesystems are healthy, when you reboot the server and check them
there are zero errors. There's something wrong with the way that the
pathing failover is being handled, but I'm not sure where I'd find the
ultimate root cause of this.
This segfault occurs after the above issues have already manifested:
[ 4057.146508] multipathd[3261]: segfault at a ip 00007f89bdce798a sp
00007fffd25c2780 error 4 in libc-2.11.1.so[7f89bdc70000+17a000].
root@<host>:~# apt-cache policy multipath-tools
multipath-tools:
Installed: 0.4.8-14ubuntu4.10.04.2
Candidate: 0.4.8-14ubuntu4.10.04.2
Version table:
*** 0.4.8-14ubuntu4.10.04.2 0
500 http://au.archive.ubuntu.com/ubuntu/ lucid-updates/main Packages
100 /var/lib/dpkg/status
0.4.8-14ubuntu4 0
500 http://au.archive.ubuntu.com/ubuntu/ lucid/main Packages
Let me know if you need further details.
ProblemType: Bug
DistroRelease: Ubuntu 10.04
Package: multipath-tools 0.4.8-14ubuntu4.10.04.2
ProcVersionSignature: Ubuntu 2.6.32-41.91-server 2.6.32.59+drm33.24
Uname: Linux 2.6.32-41-server x86_64
Architecture: amd64
Date: Tue Jul 3 15:13:23 2012
InstallationMedia: Ubuntu-Server 10.04.3 LTS "Lucid Lynx" - Release amd64 (20110719.2)
ProcEnviron:
LANG=en_AU.UTF8
SHELL=/bin/bash
SourcePackage: multipath-tools
** Affects: multipath-tools (Ubuntu)
Importance: Undecided
Status: New
** Tags: amd64 apport-bug lucid
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to multipath-tools in Ubuntu.
https://bugs.launchpad.net/bugs/1020436
Title:
Multiple filesystems cannot read superblock after fibre path failover
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/multipath-tools/+bug/1020436/+subscriptions
More information about the Ubuntu-server-bugs
mailing list