[Bug 763467] Re: SIOCGMIIREG errors on e1000e interface

[Anders Bruun Olsen]

This problem also affects servers in my farm.

>From syslog:
Aug  8 11:08:22 webcache1 Keepalived_vrrp: SIOCGMIIREG on eth1 failed: Input/output error
Aug  8 11:08:22 webcache1 Keepalived_vrrp: last message repeated 21 times
Aug  8 11:08:22 webcache1 Keepalived_healthcheckers: SIOCGMIIREG on eth1 failed: Input/output error

# dmesg | grep eth1
[    1.833254] 0000:05:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:23:7d:fd:81:12
[    1.833258] 0000:05:00.0: eth1: Intel(R) PRO/1000 Network Connection
[    1.833343] 0000:05:00.0: eth1: MAC: 1, PHY: 4, PBA No: d70413-004
[    8.543925] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   11.463533] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[   11.464415] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   21.962572] eth1: no IPv6 routers present

# dpkg -l keepalived
ii  keepalived                                            1.1.17-2ubuntu1                                       Failover and monitoring daemon for LVS clusters

# lspci -vvv -s 05:00.0
05:00.0 Ethernet controller: Intel Corporation 82572EI Gigabit Ethernet Controller (Copper) (rev 06)
	Subsystem: Hewlett-Packard Company Device 704a
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 28
	Region 0: Memory at ec120000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at ec100000 (32-bit, non-prefetchable) [size=128K]
	Region 2: I/O ports at 2000 [size=32]
	[virtual] Expansion ROM at e8000000 [disabled] [size=128K]
	Capabilities: [c8] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
		Address: 00000000fee0100c  Data: 4191
	Capabilities: [e0] Express (v1) Endpoint, MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <4us, L1 <64us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
	Capabilities: [100] Advanced Error Reporting <?>
	Capabilities: [140] Device Serial Number 12-81-fd-ff-ff-7d-23-00
	Kernel driver in use: e1000e
	Kernel modules: e1000e

Can we please have a fix for this?

** Changed in: keepalived (Ubuntu)
       Status: Expired => New

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to keepalived in Ubuntu.
https://bugs.launchpad.net/bugs/763467

Title:
  SIOCGMIIREG errors on e1000e interface

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/keepalived/+bug/763467/+subscriptions