[Bug 187971] Re: Samba randomly doesn't connect to local server

Václav Čermák vaclav.cermak at gmail.com
Thu Feb 21 17:29:46 GMT 2008


Attached.

Vaclav

2008/2/21, Chuck Short <chuck.short at canonical.com>:
>
> Sure run the following command from the commandline:
>
> dmesg > dmesg.txt
>
> And attach the file dmesg.txt.
>
> Thanks
>
> chuck
>
>
> --
> Samba randomly doesn't connect to local server
> https://bugs.launchpad.net/bugs/187971
> You received this bug notification because you are a direct subscriber
> of the bug.
>


[    0.000000] Linux version 2.6.22-14-generic (buildd at terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 07:42:25 UTC 2008 (Ubuntu 2.6.22-14.52-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003efd0000 (usable)
[    0.000000]  BIOS-e820: 000000003efd0000 - 000000003efde000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003efde000 - 000000003f000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed13000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] 111MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000ff780
[    0.000000] Entering add_active_range(0, 0, 258000) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   258000
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   258000
[    0.000000] On node 0 totalpages: 258000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 223 pages used for memmap
[    0.000000]   HighMem zone: 28401 pages, LIFO batch:7
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP signature @ 0xC00F8BD0 checksum 0
[    0.000000] ACPI: RSDP 000F8BD0, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT 3EFD0000, 003C (r1 A M I  OEMRSDT  11000524 MSFT       97)
[    0.000000] ACPI: FACP 3EFD0200, 0084 (r2 A M I  OEMFACP  11000524 MSFT       97)
[    0.000000] ACPI: DSDT 3EFD0430, 3FC3 (r1 UW____ F24_____        0 INTL  2002026)
[    0.000000] ACPI: FACS 3EFDE000, 0040
[    0.000000] ACPI: APIC 3EFD0390, 0054 (r1 A M I  OEMAPIC  11000524 MSFT       97)
[    0.000000] ACPI: MCFG 3EFD03F0, 003C (r1 A M I  OEMMCFG  11000524 MSFT       97)
[    0.000000] ACPI: OEMB 3EFDE040, 0046 (r1 A M I  AMI_OEM  11000524 MSFT       97)
[    0.000000] ACPI: MCFG 3EFD4400, 003C (r1 A M I  OEMMCFG  11000524 MSFT       97)
[    0.000000] ACPI: SSDT 3EFD4440, 03E7 (r1   AMI0   CPU1PM        1 INTL  2002026)
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:13 APIC version 20
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 3f000000:a1000000)
[    0.000000] Built 1 zonelists.  Total pages: 255985
[    0.000000] Kernel command line: root=UUID=939153e7-f054-4a21-b5dc-30397e418ece ro quiet splash
[    0.000000] mapped APIC to ffffd000 (fee00000)
[    0.000000] mapped IOAPIC to ffffc000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 1700.167 MHz processor.
[    7.340626] Console: colour VGA+ 80x25
[    7.341043] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    7.341531] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    7.377196] Memory: 1011388k/1032000k available (2015k kernel code, 19856k reserved, 915k data, 364k init, 114496k highmem)
[    7.377206] virtual kernel memory layout:
[    7.377208]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
[    7.377209]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    7.377210]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[    7.377212]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[    7.377213]       .init : 0xc03e3000 - 0xc043e000   ( 364 kB)
[    7.377214]       .data : 0xc02f7e86 - 0xc03dce84   ( 915 kB)
[    7.377215]       .text : 0xc0100000 - 0xc02f7e86   (2015 kB)
[    7.377219] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[    7.377257] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[    7.457241] Calibrating delay using timer specific routine.. 3402.98 BogoMIPS (lpj=6805971)
[    7.457267] Security Framework v1.0.0 initialized
[    7.457274] SELinux:  Disabled at boot.
[    7.457290] Mount-cache hash table entries: 512
[    7.457424] CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000
[    7.457436] CPU: L1 I cache: 32K, L1 D cache: 32K
[    7.457439] CPU: L2 cache: 2048K
[    7.457442] CPU: After all inits, caps: afe9fbff 00000000 00000000 00002040 00000180 00000000 00000000
[    7.457451] Compat vDSO mapped to ffffe000.
[    7.457463] Checking 'hlt' instruction... OK.
[    7.473336] SMP alternatives: switching to UP code
[    7.473536] Freeing SMP alternatives: 11k freed
[    7.473803] Early unpacking initramfs... done
[    7.820793] ACPI: Core revision 20070126
[    7.820862] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[    7.834668] CPU0: Intel(R) Pentium(R) M processor 1.70GHz stepping 08
[    7.834691] Total of 1 processors activated (3402.98 BogoMIPS).
[    7.834846] ENABLING IO-APIC IRQs
[    7.835030] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[    7.981034] Brought up 1 CPUs
[    7.981145] Booting paravirtualized kernel on bare hardware
[    7.981206] Time: 17:23:48  Date: 01/21/108
[    7.981228] NET: Registered protocol family 16
[    7.981310] EISA bus registered
[    7.981322] ACPI: bus type pci registered
[    7.981466] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[    7.981468] PCI: Using configuration type 1
[    7.981470] Setting up standard PCI resources
[    7.993832] ACPI: EC: Look up EC in DSDT
[    7.993966] ACPI: EC: GPE=0x18, ports=0x66, 0x62
[    8.006162] ACPI: Interpreter enabled
[    8.006165] ACPI: (supports S0 S3 S4 S5)
[    8.006182] ACPI: Using IOAPIC for interrupt routing
[    8.012872] ACPI: EC: GPE=0x18, ports=0x66, 0x62
[    8.012963] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    8.012975] PCI: Probing PCI hardware (bus 00)
[    8.013491] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[    8.013495] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[    8.013887] PCI: Transparent bridge - 0000:00:1e.0
[    8.013920] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    8.014055] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    8.014164] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    8.030632] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    8.030734] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    8.030834] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    8.030934] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    8.031033] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    8.031134] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    8.031233] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    8.031333] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    8.031423] Linux Plug and Play Support v0.97 (c) Adam Belay
[    8.031431] pnp: PnP ACPI init
[    8.031438] ACPI: bus type pnp registered
[    8.033023] pnp: PnP ACPI: found 12 devices
[    8.033025] ACPI: ACPI bus type pnp unregistered
[    8.033031] PnPBIOS: Disabled by ACPI PNP
[    8.033076] PCI: Using ACPI for IRQ routing
[    8.033079] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    8.033084] PCI: Cannot allocate resource region 7 of bridge 0000:00:1e.0
[    8.033151] PCI: Cannot allocate resource region 0 of device 0000:01:0c.0
[    8.037909] NET: Registered protocol family 8
[    8.037911] NET: Registered protocol family 20
[    8.037965] pnp: 00:01: iomem range 0xfed13000-0xfed19fff could not be reserved
[    8.037972] pnp: 00:08: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[    8.037975] pnp: 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
[    8.037979] pnp: 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
[    8.037982] pnp: 00:08: iomem range 0xfff80000-0xffffffff could not be reserved
[    8.037987] pnp: 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[    8.037990] pnp: 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[    8.037994] pnp: 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved
[    8.037999] pnp: 00:0b: iomem range 0x0-0x9ffff could not be reserved
[    8.038002] pnp: 00:0b: iomem range 0x0-0x0 could not be reserved
[    8.038005] pnp: 00:0b: iomem range 0xe0000-0xfffff could not be reserved
[    8.038008] pnp: 00:0b: iomem range 0x100000-0x3effffff could not be reserved
[    8.040970] Time: tsc clocksource has been installed.
[    8.068264] PCI: Bridge: 0000:00:1c.0
[    8.068267]   IO window: d000-dfff
[    8.068272]   MEM window: bfc00000-bfcfffff
[    8.068277]   PREFETCH window: bfd00000-bfdfffff
[    8.068284] PCI: Bridge: 0000:00:1e.0
[    8.068287]   IO window: 1000-1fff
[    8.068292]   MEM window: ffc00000-ffcfffff
[    8.068295]   PREFETCH window: disabled.
[    8.068314] PCI: Enabling device 0000:00:1c.0 (0106 -> 0107)
[    8.068321] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[    8.068327] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    8.068337] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    8.068348] NET: Registered protocol family 2
[    8.104967] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    8.105038] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[    8.106486] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    8.107190] TCP: Hash tables configured (established 131072 bind 65536)
[    8.107194] TCP reno registered
[    8.117106] checking if image is initramfs... it is
[    8.568724] Switched to high resolution mode on CPU 0
[    8.795714] Freeing initrd memory: 7116k freed
[    8.796136] audit: initializing netlink socket (disabled)
[    8.796155] audit(1203614628.052:1): initialized
[    8.796233] highmem bounce pool size: 64 pages
[    8.798048] VFS: Disk quotas dquot_6.5.1
[    8.798097] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    8.798198] io scheduler noop registered
[    8.798200] io scheduler anticipatory registered
[    8.798202] io scheduler deadline registered
[    8.798219] io scheduler cfq registered (default)
[    8.798236] Boot video device is 0000:00:02.0
[    8.798389] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    8.798427] assign_interrupt_mode Found MSI capability
[    8.798431] Allocate Port Service[0000:00:1c.0:pcie00]
[    8.798463] Allocate Port Service[0000:00:1c.0:pcie02]
[    8.798600] isapnp: Scanning for PnP cards...
[    9.151732] isapnp: No Plug & Play device found
[    9.176850] Real Time Clock Driver v1.12ac
[    9.176973] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    9.178140] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[    9.178355] input: Macintosh mouse button emulation as /class/input/input0
[    9.178430] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    9.183512] i8042.c: Detected active multiplexing controller, rev 1.0.
[    9.184336] serio: i8042 KBD port at 0x60,0x64 irq 1
[    9.184344] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    9.184347] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    9.184349] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    9.184352] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    9.184521] mice: PS/2 mouse device common for all mice
[    9.185030] EISA: Probing bus 0 at eisa.0
[    9.185040] Cannot allocate resource for EISA slot 1
[    9.185061] EISA: Detected 0 cards.
[    9.185168] TCP cubic registered
[    9.185184] NET: Registered protocol family 1
[    9.185211] Using IPI No-Shortcut mode
[    9.185421]   Magic number: 12:179:391
[    9.185781] Freeing unused kernel memory: 364k freed
[    9.224387] input: AT Translated Set 2 keyboard as /class/input/input1
[   10.386101] AppArmor: AppArmor initialized<5>audit(1203614629.552:2):  type=1505 info="AppArmor initialized" pid=1200
[   10.391487] fuse init (API version 7.8)
[   10.396747] Failure registering capabilities with primary security module.
[   10.411292] ACPI: CPU0 (power states: C1[C1] C2[C2])
[   10.411297] ACPI: Processor [CPU1] (supports 8 throttling states)
[   10.415731] ACPI: Thermal Zone [THRM] (40 C)
[   10.816653] usbcore: registered new interface driver usbfs
[   10.816683] usbcore: registered new interface driver hub
[   10.816706] usbcore: registered new device driver usb
[   10.817457] USB Universal Host Controller Interface driver v3.0
[   10.817532] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 17
[   10.817542] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   10.817546] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   10.817743] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   10.817772] uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000e400
[   10.817888] usb usb1: configuration #1 chosen from 1 choice
[   10.817912] hub 1-0:1.0: USB hub found
[   10.817918] hub 1-0:1.0: 2 ports detected
[   10.910211] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[   10.919541] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
[   10.919554] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   10.919558] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   10.919585] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   10.919615] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000e480
[   10.919712] usb usb2: configuration #1 chosen from 1 choice
[   10.919737] hub 2-0:1.0: USB hub found
[   10.919743] hub 2-0:1.0: 2 ports detected
[   10.942800] SCSI subsystem initialized
[   10.948001] libata version 2.21 loaded.
[   11.023502] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
[   11.023516] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   11.023520] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   11.023543] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   11.023573] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000e800
[   11.023668] usb usb3: configuration #1 chosen from 1 choice
[   11.023696] hub 3-0:1.0: USB hub found
[   11.023703] hub 3-0:1.0: 2 ports detected
[   11.127427] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[   11.127441] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   11.127445] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   11.127468] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[   11.127499] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e880
[   11.127595] usb usb4: configuration #1 chosen from 1 choice
[   11.127620] hub 4-0:1.0: USB hub found
[   11.127627] hub 4-0:1.0: 2 ports detected
[    3.644000] Marking TSC unstable due to: possible TSC halt in C2.
[    3.648000] Time: acpi_pm clocksource has been installed.
[    3.744000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 17
[    3.744000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    3.744000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.744000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[    3.744000] ehci_hcd 0000:00:1d.7: debug port 1
[    3.744000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[    3.744000] ehci_hcd 0000:00:1d.7: irq 17, io mem 0xffe3fc00
[    3.748000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.748000] usb usb5: configuration #1 chosen from 1 choice
[    3.748000] hub 5-0:1.0: USB hub found
[    3.748000] hub 5-0:1.0: 8 ports detected
[    3.852000] 8139cp 0000:01:0c.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[    3.852000] 8139cp 0000:01:0c.0: Try the "8139too" driver instead.
[    3.852000] 8139too Fast Ethernet driver 0.9.28
[    3.852000] ACPI: PCI Interrupt 0000:01:0c.0[A] -> GSI 19 (level, low) -> IRQ 18
[    3.852000] eth0: RealTek RTL8139 at 0xf883ec00, 00:03:0d:48:8d:2d, IRQ 18
[    3.852000] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[    3.852000] ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 18 (level, low) -> IRQ 19
[    3.904000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[ffcff000-ffcff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    3.904000] ata_piix 0000:00:1f.2: version 2.11
[    3.904000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    3.904000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18
[    3.904000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    3.904000] scsi0 : ata_piix
[    3.904000] scsi1 : ata_piix
[    3.904000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
[    3.904000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
[    4.068000] ata1.00: ATA-7: FUJITSU MHV2080BH, 00000029, max UDMA/100
[    4.068000] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    4.084000] ata1.00: configured for UDMA/100
[    4.404000] ata2.00: ATAPI: _NEC DVD_RW ND-6750A, 2.41, max UDMA/33
[    4.576000] ata2.00: configured for UDMA/33
[    4.576000] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2080B 0000 PQ: 0 ANSI: 5
[    4.576000] scsi 1:0:0:0: CD-ROM            _NEC     DVD_RW ND-6750A  2.41 PQ: 0 ANSI: 5
[    4.596000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[    4.596000] sd 0:0:0:0: [sda] Write Protect is off
[    4.596000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.596000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.596000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[    4.596000] sd 0:0:0:0: [sda] Write Protect is off
[    4.596000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.596000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.596000]  sda:sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    4.596000] Uniform CD-ROM driver Revision: 3.20
[    4.596000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    4.600000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.600000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    4.680000]  sda1 sda2 sda3 < sda5 >
[    4.708000] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.940000] Attempting manual resume
[    4.940000] swsusp: Resume From Partition 8:2
[    4.940000] PM: Checking swsusp image.
[    4.940000] PM: Resume from disk failed.
[    4.980000] kjournald starting.  Commit interval 5 seconds
[    4.980000] EXT3-fs: mounted filesystem with ordered data mode.
[    5.176000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00030d4950ebad0b]
[   12.440000] Linux agpgart interface v0.102 (c) Dave Jones
[   12.468000] agpgart: Detected an Intel 915GM Chipset.
[   12.468000] agpgart: Detected 16124K stolen memory.
[   12.504000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   12.616000] agpgart: AGP aperture is 256M @ 0xd0000000
[   12.616000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.968000] intel_rng: FWH not detected
[   13.856000] iTCO_vendor_support: vendor-support=0
[   13.860000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[   13.924000] ieee80211_crypt: registered algorithm 'NULL'
[   13.924000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   13.924000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno at linux.intel.com>
[   14.020000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq
[   14.020000] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[   14.020000] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 20
[   14.020000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[   14.296000] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
[   14.352000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[   14.352000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   14.444000] Synaptics Touchpad, model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0
[   14.484000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[   14.488000] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x0860)
[   14.488000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   14.488000] input: PC Speaker as /class/input/input3
[   14.712000] hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
[   15.140000] lp: driver loaded but no devices found
[   15.236000] Adding 979956k swap on /dev/sda2.  Priority:-1 extents:1 across:979956k
[   15.688000] EXT3 FS on sda1, internal journal
[   16.428000] kjournald starting.  Commit interval 5 seconds
[   16.428000] EXT3 FS on sda5, internal journal
[   16.428000] EXT3-fs: mounted filesystem with ordered data mode.
[   17.364000] No dock devices found.
[   17.664000] ACPI: Battery Slot [BAT0] (battery present)
[   17.760000] input: Power Button (FF) as /class/input/input4
[   17.764000] ACPI: Power Button (FF) [PWRF]
[   17.804000] input: Lid Switch as /class/input/input5
[   17.808000] ACPI: Lid Switch [LID]
[   17.852000] input: Sleep Button (CM) as /class/input/input6
[   17.856000] ACPI: Sleep Button (CM) [SLPB]
[   17.896000] input: Power Button (CM) as /class/input/input7
[   17.900000] ACPI: Power Button (CM) [PWRB]
[   17.920000] ACPI: Video Device [IGD] (multi-head: yes  rom: no  post: no)
[   17.940000] ACPI: AC Adapter [AC0] (off-line)
[   18.576000] Clocksource tsc unstable (delta = -160795192 ns)
[   19.476000] ppdev: user-space parallel port driver
[   19.608000] eth0: link down
[   20.104000] audit(1203614647.645:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4723 profile="/usr/sbin/cupsd"
[   20.160000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[   20.160000] apm: overridden by ACPI.
[   21.416000] Failure registering capabilities with primary security module.
[   21.664000] Bluetooth: Core ver 2.11
[   21.664000] NET: Registered protocol family 31
[   21.664000] Bluetooth: HCI device and connection manager initialized
[   21.664000] Bluetooth: HCI socket layer initialized
[   21.692000] Bluetooth: L2CAP ver 2.8
[   21.692000] Bluetooth: L2CAP socket layer initialized
[   21.820000] Bluetooth: RFCOMM socket layer initialized
[   21.820000] Bluetooth: RFCOMM TTY layer initialized
[   21.820000] Bluetooth: RFCOMM ver 1.8
[   25.032000] [drm] Initialized drm 1.1.0 20060810
[   25.040000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[   25.040000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[   71.020000] NET: Registered protocol family 10
[   71.024000] lo: Disabled Privacy Extensions
[   71.024000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   81.076000] eth1: no IPv6 routers present

-- 
Samba randomly doesn't connect to local server
https://bugs.launchpad.net/bugs/187971
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to samba in ubuntu.



More information about the Ubuntu-server-bugs mailing list