dubbla skärmar - redigering av xorg.conf

[Magnus Koch]

Hej
Compiz funkar inte med dubbla skärmar. Bifogar en xorg.conf för dubbla
skärmar som funkar med mitt NVIDIA-kort.

Magnus

tis 2008-03-25 klockan 17:33 +0100 skrev Anders Wallenquist:

> tor 2008-03-20 klockan 16:29 +0100 skrev lali:
> > 
> > Hej
> > har problem att få till redigeringen i xorg så mina två
> > skärmar fungerar. Får bara vga-skärmen att visa nåt.
> > Dessutom erkänner den inte alls att två skärmar finns.
> > Jag har prövat att redigera i xorg.conf efter olika tips
> > från Google, men när jag tycker det är rätt
> > så hittar den inte nån skärm istället. 
> > 
> > Grafikkort Nvidia 6200, två skärmar en vga och en dvi widescreens från
> > acer 22" och 19"
> > Kubuntu 7.10
> 
> Har konfigurerat dubbla skärmar via "System/Administration/Skärmar och
> grafik"
> 
> Ubuntu 7.10
> Nvidia 6150
> 2x19" 1280x1024
> 
> Kan dock inte blanda dubbla skärmar och Compiz utan Gnome faller
> tillbaka på metacity.
> 
> /Anders
> > 
> > Så, om nån är haj på det där med xorg.conf-redigiering får denna gärna
> > hjälpa mig. Jag bifogar relevanta delar ur min xorg.conf här under.
> > 
> > mvh Christian Malmborg
> > 
> > Section "Device"
> > Identifier "6200 0"
> > 
> > Driver "nvidia"
> > Option "NoLogo" "true"
> > Option "RenderAccel" "true"
> > Screen 0
> > BusID "PCI:2:0:0"
> > EndSection
> > 
> > Section "Device"
> > Identifier "6200 1"
> > 
> > Driver "nvidia"
> > Option "NoLogo" "true"
> > Option "RenderAccel" "true"
> > Screen 1
> > BusID "PCI:2:0:0"
> > EndSection
> > 
> > Section "Screen"
> > Identifier "Screen 0"
> > 
> > Device "6200 0"
> > Monitor "Monitor 0"
> > DefaultDepth 24
> > Option "ConnectedMonitor" "CRT-0"
> > Subsection "Display"
> > Depth 24
> > Modes "1400x900" "1280x1024"
> > 
> > EndSubsection
> > EndSection
> > 
> > Section "Screen"
> > Identifier "Screen 1"
> > Device "6200 1"
> > Monitor "Monitor 1"
> > DefaultDepth 24
> > Option "ConnectedMonitor" "DFP-0"
> > 
> > Subsection "Display"
> > Depth 24
> > Modes "1680x1050" "1280x1024"
> > EndSubsection
> > EndSection
> > 
> > 
> > 
> > Section "ServerLayout"
> > 	Identifier	"Default Layout"
> > Screen 0 "Screen 0"
> > 
> > Screen 1 "Screen 1" LeftOf "Screen 0"
> > 	Inputdevice	"Generic Keyboard"
> > 	Inputdevice	"Configured Mouse"
> > 	
> > 	# Uncomment if you have a wacom tablet
> > 	#	InputDevice     "stylus"	"SendCoreEvents"
> > 
> > 	#	InputDevice     "cursor"	"SendCoreEvents"
> > 	#	InputDevice     "eraser"	"SendCoreEvents"
> > EndSection
> > Section "Module"
> > 	Load		"glx"
> > EndSection
> > 
> 



-------------- next part --------------
En HTML-bilaga skiljdes ut...
URL: https://lists.ubuntu.com/archives/ubuntu-se/attachments/20080325/9325b87b/attachment.htm 
-------------- next part --------------
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildmeister at builder3)  Thu Dec 13 19:10:32 PST 2007

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    Screen      1  "Screen1" RightOf "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
    RgbPath         "/usr/lib/X11/rgb"
EndSection

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
    Load           "glx"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "1"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Acer AL1722"
    HorizSync       30.0 - 83.0
    VertRefresh     55.0 - 75.0
    Option         "DPMS"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "Hansol H750"
    HorizSync       30.0 - 81.0
    VertRefresh     56.0 - 77.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 7600 GS"
    BusID          "PCI:7:0:0"
    Screen          0
EndSection

Section "Device"
    Identifier     "Videocard1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 7600 GS"
    BusID          "PCI:7:0:0"
    Screen          1
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Videocard0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "DFP: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen1"
    Device         "Videocard1"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "TwinViewXineramaInfoOrder" "CRT-0"
    Option         "metamodes" "CRT: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection