тормоза при копировании на флешку
-=Devil_InSide=-
devil_inside на mail.ru
Сб Май 5 14:00:19 UTC 2012
в дополнение к ошибкам ввода\вывода на.
[ 505.039164] sd 6:0:0:1: [sdd] CDB: Read(10): 28 00 00 00 20 20 00 00
08 00
[ 505.039169] end_request: I/O error, dev sdd, sector 8224
[ 505.039173] Buffer I/O error on device sdd1, logical block 4
[ 505.040270] sd 6:0:0:1: [sdd] Device not ready
[ 505.040273] sd 6:0:0:1: [sdd] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[ 505.040275] sd 6:0:0:1: [sdd] Sense Key : Not Ready [current]
[ 505.040278] Info fld=0x0
[ 505.040279] sd 6:0:0:1: [sdd] Add. Sense: Medium not present
[ 505.040282] sd 6:0:0:1: [sdd] CDB: Read(10): 28 00 00 00 30 00 00 00
08 00
вот вам:
[ 0.400157] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.400191] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low)
[ 0.400201] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.400232] ohci_hcd 0000:00:12.0: new USB bus registered, assigned
[ 0.400256] ohci_hcd 0000:00:12.0: irq 16, io mem 0xf9efe000
[ 0.464249] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low)
[ 0.464257] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 0.464298] ohci_hcd 0000:00:12.1: new USB bus registered, assigned
[ 0.464315] ohci_hcd 0000:00:12.1: irq 16, io mem 0xf9efd000
[ 0.524217] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low)
[ 0.524226] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.524256] ohci_hcd 0000:00:13.0: new USB bus registered, assigned
[ 0.524278] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf9efc000
[ 0.584215] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low)
[ 0.584224] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 0.584254] ohci_hcd 0000:00:13.1: new USB bus registered, assigned
[ 0.584272] ohci_hcd 0000:00:13.1: irq 18, io mem 0xf9efb000
[ 0.644211] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low)
[ 0.644222] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 0.644252] ohci_hcd 0000:00:14.5: new USB bus registered, assigned
[ 0.644269] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf9ef9000
[ 0.970027] usb 3-3: new low speed USB device using ohci_hcd and
копайтесь либо в модулях, либо в железе.
,-----[Максим, 5 May 2012 10:14]:
>> разбирайтесь со своим там убунтовиндоколхозом и доложите о
>> (не)результативных результатах и предпринятых исследовательских
>> исследованиях.
> Кароче, отформатировал ЦД в ext3 и в NTFS - разницы не ощутил.
>
>>
>> а заодно залезьте в интернеты и найдите статью "как правильно задавать
>> вопросы"
>> очень прям хорошая она.
>>
> Статью не нашел.
> Дайте ссылку.
>
> А вот и dmesg, но я там ничего не понимаю.
>
>
> 0.336262] pnp: PnP ACPI: found 14 devices
> [ 0.336264] ACPI: ACPI bus type pnp unregistered
> [ 0.336275] system 00:07: iomem range 0xfec00000-0xfec00fff could not
> be reserved
> [ 0.336278] system 00:07: iomem range 0xfee00000-0xfee00fff has been
> reserved
> [ 0.336284] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
> [ 0.336286] system 00:08: ioport range 0x40b-0x40b has been reserved
> [ 0.336288] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
> [ 0.336290] system 00:08: ioport range 0xc00-0xc01 has been reserved
> [ 0.336293] system 00:08: ioport range 0xc14-0xc14 has been reserved
> [ 0.336295] system 00:08: ioport range 0xc50-0xc51 has been reserved
> [ 0.336297] system 00:08: ioport range 0xc52-0xc52 has been reserved
> [ 0.336300] system 00:08: ioport range 0xc6c-0xc6c has been reserved
> [ 0.336302] system 00:08: ioport range 0xc6f-0xc6f has been reserved
> [ 0.336304] system 00:08: ioport range 0xcd0-0xcd1 has been reserved
> [ 0.336307] system 00:08: ioport range 0xcd2-0xcd3 has been reserved
> [ 0.336309] system 00:08: ioport range 0xcd4-0xcd5 has been reserved
> [ 0.336311] system 00:08: ioport range 0xcd6-0xcd7 has been reserved
> [ 0.336314] system 00:08: ioport range 0xcd8-0xcdf has been reserved
> [ 0.336316] system 00:08: ioport range 0x800-0x89f has been reserved
> [ 0.336318] system 00:08: ioport range 0xb00-0xb0f has been reserved
> [ 0.336321] system 00:08: ioport range 0xb20-0xb3f has been reserved
> [ 0.336323] system 00:08: ioport range 0x900-0x90f has been reserved
> [ 0.336325] system 00:08: ioport range 0x910-0x91f has been reserved
> [ 0.336328] system 00:08: ioport range 0xfe00-0xfefe has been
> reserved
> [ 0.336330] system 00:08: iomem range 0xffb80000-0xffbfffff has been
> reserved
> [ 0.336333] system 00:08: iomem range 0xfec10000-0xfec1001f has been
> reserved
> [ 0.336338] system 00:0b: ioport range 0x280-0x28f has been reserved
> [ 0.336340] system 00:0b: ioport range 0x290-0x29f has been reserved
> [ 0.336349] system 00:0c: iomem range 0xe0000000-0xefffffff has been
> reserved
> [ 0.336354] system 00:0d: iomem range 0xfec00000-0xffffffff could not
> be reserved
> [ 0.341042] Switching to clocksource acpi_pm
> [ 0.341321] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
> [ 0.341321] pci 0000:00:02.0: IO window: 0xe000-0xefff
> [ 0.341321] pci 0000:00:02.0: MEM window: 0xfa000000-0xfebfffff
> [ 0.341321] pci 0000:00:02.0: PREFETCH window:
> 0x000000d0000000-0x000000dfffffff
> [ 0.341321] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:01
> [ 0.341321] pci 0000:00:0a.0: IO window: 0xd000-0xdfff
> [ 0.341321] pci 0000:00:0a.0: MEM window: 0xf9f00000-0xf9ffffff
> [ 0.341321] pci 0000:00:0a.0: PREFETCH window:
> 0x000000cff00000-0x000000cfffffff
> [ 0.341321] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03
> [ 0.341321] pci 0000:00:14.4: IO window: disabled
> [ 0.341321] pci 0000:00:14.4: MEM window: disabled
> [ 0.341321] pci 0000:00:14.4: PREFETCH window: disabled
> [ 0.341321] alloc irq_desc for 18 on node 0
> [ 0.341321] alloc kstat_irqs on node 0
> [ 0.341321] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ
> 18
> [ 0.341321] pci 0000:00:02.0: setting latency timer to 64
> [ 0.341321] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ
> 18
> [ 0.341321] pci 0000:00:0a.0: setting latency timer to 64
> [ 0.341321] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
> [ 0.341321] pci_bus 0000:00: resource 1 mem:
> [0x000000-0xffffffffffffffff]
> [ 0.341321] pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
> [ 0.341321] pci_bus 0000:02: resource 1 mem: [0xfa000000-0xfebfffff]
> [ 0.341321] pci_bus 0000:02: resource 2 pref mem
> [0xd0000000-0xdfffffff]
> [ 0.341321] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
> [ 0.341321] pci_bus 0000:01: resource 1 mem: [0xf9f00000-0xf9ffffff]
> [ 0.341321] pci_bus 0000:01: resource 2 pref mem
> [0xcff00000-0xcfffffff]
> [ 0.341321] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
> [ 0.341321] pci_bus 0000:03: resource 4 mem:
> [0x000000-0xffffffffffffffff]
> [ 0.341321] NET: Registered protocol family 2
> [ 0.341321] IP route cache hash table entries: 65536 (order: 7,
> 524288 bytes)
> [ 0.341321] TCP established hash table entries: 262144 (order: 10,
> 4194304 bytes)
> [ 0.343184] TCP bind hash table entries: 65536 (order: 8, 1048576
> bytes)
> [ 0.343743] TCP: Hash tables configured (established 262144 bind
> 65536)
> [ 0.343745] TCP reno registered
> [ 0.343876] NET: Registered protocol family 1
> [ 0.343998] pci 0000:02:00.0: Boot video device
> [ 0.345011] Scanning for low memory corruption every 60 seconds
> [ 0.345122] audit: initializing netlink socket (disabled)
> [ 0.345131] type=2000 audit(1336222532.340:1): initialized
> [ 0.352548] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 0.353721] VFS: Disk quotas dquot_6.5.2
> [ 0.353768] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 0.354290] fuse init (API version 7.13)
> [ 0.354357] msgmni has been set to 4000
> [ 0.354542] alg: No test for stdrng (krng)
> [ 0.354583] Block layer SCSI generic (bsg) driver version 0.4 loaded
> (major 253)
> [ 0.354586] io scheduler noop registered
> [ 0.354587] io scheduler anticipatory registered
> [ 0.354589] io scheduler deadline registered
> [ 0.354638] io scheduler cfq registered (default)
> [ 0.354782] alloc irq_desc for 24 on node 0
> [ 0.354784] alloc kstat_irqs on node 0
> [ 0.354792] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
> [ 0.354799] pcieport 0000:00:02.0: setting latency timer to 64
> [ 0.354900] alloc irq_desc for 25 on node 0
> [ 0.354901] alloc kstat_irqs on node 0
> [ 0.354906] pcieport 0000:00:0a.0: irq 25 for MSI/MSI-X
> [ 0.354911] pcieport 0000:00:0a.0: setting latency timer to 64
> [ 0.354972] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 0.354993] pciehp: PCI Express Hot Plug Controller Driver version:
> 0.4
> [ 0.355088] input: Power Button
> as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
> [ 0.355092] ACPI: Power Button [PWRB]
> [ 0.355132] input: Power Button
> as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
> [ 0.355134] ACPI: Power Button [PWRF]
> [ 0.355478] processor LNXCPU:00: registered as cooling_device0
> [ 0.355508] processor LNXCPU:01: registered as cooling_device1
> [ 0.357261] ACPI Error: No handler for Region [SACS]
> (ffff88007db3aa68) [PCI_Config] (20090903/evregion-319)
> [ 0.357266] ACPI Error: Region PCI_Config(2) has no handler
> (20090903/exfldio-295)
> [ 0.357270] ACPI Error (psparse-0537): Method parse/execution failed
> [\PRID.P_D0._STA] (Node ffff88007d0481e0), AE_NOT_EXIST
> [ 0.357291] ACPI Error (uteval-0250): Method execution failed
> [\PRID.P_D0._STA] (Node ffff88007d0481e0), AE_NOT_EXIST
> [ 0.357311] ACPI Error: No handler for Region [SACS]
> (ffff88007db3aa68) [PCI_Config] (20090903/evregion-319)
> [ 0.357315] ACPI Error: Region PCI_Config(2) has no handler
> (20090903/exfldio-295)
> [ 0.357319] ACPI Error (psparse-0537): Method parse/execution failed
> [\PRID.P_D1._STA] (Node ffff88007d0482c0), AE_NOT_EXIST
> [ 0.357338] ACPI Error (uteval-0250): Method execution failed
> [\PRID.P_D1._STA] (Node ffff88007d0482c0), AE_NOT_EXIST
> [ 0.357365] ACPI Error: No handler for Region [SACS]
> (ffff88007db3aa68) [PCI_Config] (20090903/evregion-319)
> [ 0.357369] ACPI Error: Region PCI_Config(2) has no handler
> (20090903/exfldio-295)
> [ 0.357373] ACPI Error (psparse-0537): Method parse/execution failed
> [\SECD.S_D0._STA] (Node ffff88007d0484a0), AE_NOT_EXIST
> [ 0.357392] ACPI Error (uteval-0250): Method execution failed
> [\SECD.S_D0._STA] (Node ffff88007d0484a0), AE_NOT_EXIST
> [ 0.357412] ACPI Error: No handler for Region [SACS]
> (ffff88007db3aa68) [PCI_Config] (20090903/evregion-319)
> [ 0.357415] ACPI Error: Region PCI_Config(2) has no handler
> (20090903/exfldio-295)
> [ 0.357419] ACPI Error (psparse-0537): Method parse/execution failed
> [\SECD.S_D1._STA] (Node ffff88007d048580), AE_NOT_EXIST
> [ 0.357439] ACPI Error (uteval-0250): Method execution failed
> [\SECD.S_D1._STA] (Node ffff88007d048580), AE_NOT_EXIST
> [ 0.358610] hpet_acpi_add: no address or irqs in _CRS
> [ 0.358622] Linux agpgart interface v0.103
> [ 0.358652] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [ 0.358767] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 0.359056] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 0.359882] brd: module loaded
> [ 0.360344] loop: module loaded
> [ 0.360420] input: Macintosh mouse button emulation
> as /devices/virtual/input/input2
> [ 0.360611] alloc irq_desc for 16 on node 0
> [ 0.360613] alloc kstat_irqs on node 0
> [ 0.360619] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low)
> -> IRQ 16
> [ 0.360657] pata_acpi 0000:00:14.1: setting latency timer to 64
> [ 0.360945] Fixed MDIO Bus: probed
> [ 0.360972] PPP generic driver version 2.4.2
> [ 0.360999] tun: Universal TUN/TAP device driver, 1.6
> [ 0.361001] tun: (C) 1999-2004 Max Krasnyansky <maxk на qualcomm.com>
> [ 0.361067] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
> Driver
> [ 0.361115] alloc irq_desc for 17 on node 0
> [ 0.361117] alloc kstat_irqs on node 0
> [ 0.361120] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low)
> -> IRQ 17
> [ 0.361139] ehci_hcd 0000:00:12.2: EHCI Host Controller
> [ 0.361169] ehci_hcd 0000:00:12.2: new USB bus registered, assigned
> bus number 1
> [ 0.361206] ehci_hcd 0000:00:12.2: debug port 1
> [ 0.361231] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf9eff000
> [ 0.380026] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
> [ 0.380102] usb usb1: configuration #1 chosen from 1 choice
> [ 0.380126] hub 1-0:1.0: USB hub found
> [ 0.380134] hub 1-0:1.0: 6 ports detected
> [ 0.380213] alloc irq_desc for 19 on node 0
> [ 0.380214] alloc kstat_irqs on node 0
> [ 0.380218] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low)
> -> IRQ 19
> [ 0.380232] ehci_hcd 0000:00:13.2: EHCI Host Controller
> [ 0.380259] ehci_hcd 0000:00:13.2: new USB bus registered, assigned
> bus number 2
> [ 0.380289] ehci_hcd 0000:00:13.2: debug port 1
> [ 0.380308] ehci_hcd 0000:00:13.2: irq 19, io mem 0xf9efa800
> [ 0.400018] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
> [ 0.400073] usb usb2: configuration #1 chosen from 1 choice
> [ 0.400095] hub 2-0:1.0: USB hub found
> [ 0.400101] hub 2-0:1.0: 6 ports detected
> [ 0.400157] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 0.400191] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low)
> -> IRQ 16
> [ 0.400201] ohci_hcd 0000:00:12.0: OHCI Host Controller
> [ 0.400232] ohci_hcd 0000:00:12.0: new USB bus registered, assigned
> bus number 3
> [ 0.400256] ohci_hcd 0000:00:12.0: irq 16, io mem 0xf9efe000
> [ 0.454263] Freeing initrd memory: 8172k freed
> [ 0.464085] usb usb3: configuration #1 chosen from 1 choice
> [ 0.464107] hub 3-0:1.0: USB hub found
> [ 0.464116] hub 3-0:1.0: 3 ports detected
> [ 0.464249] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low)
> -> IRQ 16
> [ 0.464257] ohci_hcd 0000:00:12.1: OHCI Host Controller
> [ 0.464298] ohci_hcd 0000:00:12.1: new USB bus registered, assigned
> bus number 4
> [ 0.464315] ohci_hcd 0000:00:12.1: irq 16, io mem 0xf9efd000
> [ 0.524085] usb usb4: configuration #1 chosen from 1 choice
> [ 0.524109] hub 4-0:1.0: USB hub found
> [ 0.524118] hub 4-0:1.0: 3 ports detected
> [ 0.524217] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low)
> -> IRQ 18
> [ 0.524226] ohci_hcd 0000:00:13.0: OHCI Host Controller
> [ 0.524256] ohci_hcd 0000:00:13.0: new USB bus registered, assigned
> bus number 5
> [ 0.524278] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf9efc000
> [ 0.584086] usb usb5: configuration #1 chosen from 1 choice
> [ 0.584110] hub 5-0:1.0: USB hub found
> [ 0.584118] hub 5-0:1.0: 3 ports detected
> [ 0.584215] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low)
> -> IRQ 18
> [ 0.584224] ohci_hcd 0000:00:13.1: OHCI Host Controller
> [ 0.584254] ohci_hcd 0000:00:13.1: new USB bus registered, assigned
> bus number 6
> [ 0.584272] ohci_hcd 0000:00:13.1: irq 18, io mem 0xf9efb000
> [ 0.644081] usb usb6: configuration #1 chosen from 1 choice
> [ 0.644103] hub 6-0:1.0: USB hub found
> [ 0.644112] hub 6-0:1.0: 3 ports detected
> [ 0.644211] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low)
> -> IRQ 18
> [ 0.644222] ohci_hcd 0000:00:14.5: OHCI Host Controller
> [ 0.644252] ohci_hcd 0000:00:14.5: new USB bus registered, assigned
> bus number 7
> [ 0.644269] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf9ef9000
> [ 0.704084] usb usb7: configuration #1 chosen from 1 choice
> [ 0.704106] hub 7-0:1.0: USB hub found
> [ 0.704114] hub 7-0:1.0: 2 ports detected
> [ 0.704185] uhci_hcd: USB Universal Host Controller Interface driver
> [ 0.704264] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
> [ 0.704266] PNP: PS/2 appears to have AUX port disabled, if this is
> incorrect please boot with i8042.nopnp
> [ 0.704929] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 0.705049] mice: PS/2 mouse device common for all mice
> [ 0.705143] rtc_cmos 00:02: RTC can wake from S4
> [ 0.705184] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
> [ 0.705208] rtc0: alarms up to one month, y3k, 114 bytes nvram
> [ 0.705322] device-mapper: uevent: version 1.0.3
> [ 0.705446] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01)
> initialised: dm-devel на redhat.com
> [ 0.705592] device-mapper: multipath: version 1.1.0 loaded
> [ 0.705595] device-mapper: multipath round-robin: version 1.0.0
> loaded
> [ 0.705838] cpuidle: using governor ladder
> [ 0.705840] cpuidle: using governor menu
> [ 0.706156] TCP cubic registered
> [ 0.706279] NET: Registered protocol family 10
> [ 0.706956] NET: Registered protocol family 17
> [ 0.706991] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core
> Processor 5200+ processors (2 cpu cores) (version 2.20.00)
> [ 0.707000] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS
> objects found.
> [ 0.707001] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
> [ 0.707083] PM: Resume from disk failed.
> [ 0.707095] registered taskstats version 1
> [ 0.707432] Magic number: 12:530:935
> [ 0.707524] rtc_cmos 00:02: setting system clock to 2012-05-05
> 12:55:32 UTC (1336222532)
> [ 0.707526] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> [ 0.707528] EDD information not available.
> [ 0.707583] Freeing unused kernel memory: 884k freed
> [ 0.708039] Write protecting the kernel read-only data: 7716k
> [ 0.722393] input: AT Translated Set 2 keyboard
> as /devices/platform/i8042/serio0/input/input3
> [ 0.722659] udev: starting version 151
> [ 0.784107] ahci 0000:00:11.0: version 3.0
> [ 0.784130] alloc irq_desc for 22 on node 0
> [ 0.784133] alloc kstat_irqs on node 0
> [ 0.784141] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) ->
> IRQ 22
> [ 0.784195] alloc irq_desc for 26 on node 0
> [ 0.784197] alloc kstat_irqs on node 0
> [ 0.784208] ahci 0000:00:11.0: irq 26 for MSI/MSI-X
> [ 0.784315] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps
> 0xf impl SATA mode
> [ 0.784318] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo
> pmp pio slum part ccc
> [ 0.792289] scsi0 : ahci
> [ 0.803478] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
> [ 0.803500] r8169 0000:01:00.0: PCI INT A -> GSI 18 (level, low) ->
> IRQ 18
> [ 0.803538] r8169 0000:01:00.0: setting latency timer to 64
> [ 0.803575] alloc irq_desc for 27 on node 0
> [ 0.803577] alloc kstat_irqs on node 0
> [ 0.803589] r8169 0000:01:00.0: irq 27 for MSI/MSI-X
> [ 0.804117] eth0: RTL8168d/8111d at 0xffffc90000356000,
> 00:19:66:e6:68:b9, XID 081000c0 IRQ 27
> [ 0.826497] Floppy drive(s): fd0 is 1.44M
> [ 0.844673] FDC 0 is a post-1991 82077
> [ 0.854822] scsi1 : ahci
> [ 0.854916] scsi2 : ahci
> [ 0.854979] scsi3 : ahci
> [ 0.855022] ata1: SATA max UDMA/133 abar m1024 на 0xf9eff800 port
> 0xf9eff900 irq 26
> [ 0.855025] ata2: SATA max UDMA/133 abar m1024 на 0xf9eff800 port
> 0xf9eff980 irq 26
> [ 0.855029] ata3: SATA max UDMA/133 abar m1024 на 0xf9eff800 port
> 0xf9effa00 irq 26
> [ 0.855032] ata4: SATA max UDMA/133 abar m1024 на 0xf9eff800 port
> 0xf9effa80 irq 26
> [ 0.855268] scsi4 : pata_atiixp
> [ 0.855363] scsi5 : pata_atiixp
> [ 0.856587] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00
> irq 14
> [ 0.856589] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08
> irq 15
> [ 0.970027] usb 3-3: new low speed USB device using ohci_hcd and
> address 2
> [ 1.094453] ata5.00: ATA-7: WDC WD1600AAJS-75PSA0, 05.06H05, max
> UDMA/133
> [ 1.094456] ata5.00: 312500000 sectors, multi 16: LBA48 NCQ (depth
> 0/32)
> [ 1.094481] ata5.01: ATAPI: Optiarc DVD RW AD-7170S, 1.02, max
> UDMA/66
> [ 1.130574] ata5.00: configured for UDMA/100
> [ 1.154187] usb 3-3: configuration #1 chosen from 1 choice
> [ 1.180421] ata5.01: configured for UDMA/66
> [ 1.200056] ata1: SATA link down (SStatus 0 SControl 300)
> [ 1.200868] ata2: SATA link down (SStatus 0 SControl 300)
> [ 1.200898] ata3: SATA link down (SStatus 0 SControl 300)
> [ 1.270025] usb 2-5: new high speed USB device using ehci_hcd and
> address 2
> [ 1.370036] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 1.373293] ata4.00: ATA-8: WDC WD15EARS-00Z5B1, 80.00A80, max
> UDMA/133
> [ 1.373296] ata4.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth
> 31/32), AA
> [ 1.376669] ata4.00: configured for UDMA/133
> [ 1.390163] scsi 3:0:0:0: Direct-Access ATA WDC WD15EARS-00Z
> 80.0 PQ: 0 ANSI: 5
> [ 1.390302] sd 3:0:0:0: [sda] 2930277168 512-byte logical blocks:
> (1.50 TB/1.36 TiB)
> [ 1.390324] sd 3:0:0:0: Attached scsi generic sg0 type 0
> [ 1.390398] sd 3:0:0:0: [sda] Write Protect is off
> [ 1.390401] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 1.390423] sd 3:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 1.390448] scsi 4:0:0:0: Direct-Access ATA WDC WD1600AAJS-7
> 05.0 PQ: 0 ANSI: 5
> [ 1.390554] sd 4:0:0:0: Attached scsi generic sg1 type 0
> [ 1.390559] sda:
> [ 1.391028] sd 4:0:0:0: [sdb] 312500000 512-byte logical blocks: (160
> GB/149 GiB)
> [ 1.391628] scsi 4:0:1:0: CD-ROM Optiarc DVD RW AD-7170S
> 1.02 PQ: 0 ANSI: 5
> [ 1.391656] sd 4:0:0:0: [sdb] Write Protect is off
> [ 1.391658] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> [ 1.391676] sd 4:0:0:0: [sdb] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 1.395564] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw
> xa/form2 cdda tray
> [ 1.395567] Uniform CD-ROM driver Revision: 3.20
> [ 1.395597] sdb:
> [ 1.395657] sr 4:0:1:0: Attached scsi CD-ROM sr0
> [ 1.395695] sr 4:0:1:0: Attached scsi generic sg2 type 5
> [ 1.396080] sda1
> [ 1.396292] sd 3:0:0:0: [sda] Attached SCSI disk
> [ 1.402688] sdb1 sdb2 < sdb5
> [ 1.422688] usb 2-5: configuration #1 chosen from 1 choice
> [ 1.429242] Initializing USB Mass Storage driver...
> [ 1.429427] scsi6 : SCSI emulation for USB Mass Storage devices
> [ 1.429525] usb-storage: device found at 2
> [ 1.429527] usb-storage: waiting for device to settle before scanning
> [ 1.429535] usbcore: registered new interface driver usb-storage
> [ 1.429537] USB Mass Storage support registered.
> [ 1.440741] sdb6 sdb7 sdb8 >
> [ 1.459373] sd 4:0:0:0: [sdb] Attached SCSI disk
> [ 1.570601] ata6.00: ATAPI: TOSHIBA ODD-DVD SD-R5272, 1030, max
> UDMA/33
> [ 1.610557] ata6.00: configured for UDMA/33
> [ 1.616916] scsi 5:0:0:0: CD-ROM TOSHIBA ODD-DVD SD-R5272
> 1030 PQ: 0 ANSI: 5
> [ 1.624965] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda
> tray
> [ 1.625040] sr 5:0:0:0: Attached scsi CD-ROM sr1
> [ 1.625098] sr 5:0:0:0: Attached scsi generic sg3 type 5
> [ 1.628867] usbcore: registered new interface driver hiddev
> [ 1.634439] input: Logitech USB-PS/2 Optical Mouse
> as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input4
> [ 1.634534] generic-usb 0003:046D:C00E.0001: input,hidraw0: USB HID
> v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on
> usb-0000:00:12.0-3/input0
> [ 1.634567] usbcore: registered new interface driver usbhid
> [ 1.634570] usbhid: v2.6:USB HID core driver
> [ 2.118785] EXT4-fs (sdb6): mounted filesystem with ordered data mode
> [ 6.420255] usb-storage: device scan complete
> [ 6.420845] scsi 6:0:0:0: Direct-Access Generic- Compact Flash
> 1.01 PQ: 0 ANSI: 0
> [ 6.421337] scsi 6:0:0:1: Direct-Access Multiple Flash Reader
> 1.05 PQ: 0 ANSI: 0
> [ 6.421816] sd 6:0:0:0: Attached scsi generic sg4 type 0
> [ 6.421946] sd 6:0:0:1: Attached scsi generic sg5 type 0
> [ 6.916430] sd 6:0:0:0: [sdc] Attached SCSI removable disk
> [ 6.917057] sd 6:0:0:1: [sdd] 7716864 512-byte logical blocks: (3.95
> GB/3.67 GiB)
> [ 6.917807] sd 6:0:0:1: [sdd] Write Protect is off
> [ 6.917810] sd 6:0:0:1: [sdd] Mode Sense: 03 00 00 00
> [ 6.917812] sd 6:0:0:1: [sdd] Assuming drive cache: write through
> [ 6.920059] sd 6:0:0:1: [sdd] Assuming drive cache: write through
> [ 6.920062] sdd: sdd1
> [ 6.922925] sd 6:0:0:1: [sdd] Assuming drive cache: write through
> [ 6.922928] sd 6:0:0:1: [sdd] Attached SCSI removable disk
> [ 13.845631] udev: starting version 151
> [ 13.848559] Adding 1998840k swap on /dev/sdb7. Priority:-1 extents:1
> across:1998840k
> [ 13.909854] vga16fb: initializing
> [ 13.909860] vga16fb: mapped to 0xffff8800000a0000
> [ 13.909965] fb0: VGA16 VGA frame buffer device
> [ 13.979356] lp: driver loaded but no devices found
> [ 14.053126] type=1505 audit(1336197345.843:2):
> operation="profile_load" pid=609 name="/sbin/dhclient3"
> [ 14.053357] type=1505 audit(1336197345.843:3):
> operation="profile_load" pid=609
> name="/usr/lib/NetworkManager/nm-dhcp-client.action"
> [ 14.053491] type=1505 audit(1336197345.843:4):
> operation="profile_load" pid=609
> name="/usr/lib/connman/scripts/dhclient-script"
> [ 14.164093] nvidia: module license 'NVIDIA' taints kernel.
> [ 14.164096] Disabling lock debugging due to kernel taint
> [ 14.340341] ACPI: resource piix4_smbus [0xb00-0xb07] conflicts with
> ACPI region SOR1 [0xb00-0xb0f]
> [ 14.340346] ACPI: If an ACPI driver is available for this device, you
> should use it instead of the native driver
> [ 14.346567] EDAC MC: Ver: 2.1.0 Jan 4 2012
> [ 14.352364] nvidia 0000:02:00.0: PCI INT A -> GSI 18 (level, low) ->
> IRQ 18
> [ 14.352375] nvidia 0000:02:00.0: setting latency timer to 64
> [ 14.352380] vgaarb: device changed decodes:
> PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
> [ 14.353102] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 290.10
> Wed Nov 16 17:39:29 PST 2011
> [ 14.355145] k8temp 0000:00:18.3: Temperature readouts might be wrong
> - check erratum #141
> [ 14.366972] EDAC amd64_edac: Ver: 3.2.0 Jan 4 2012
> [ 14.466018] EXT4-fs (sdb8): mounted filesystem with ordered data mode
> [ 14.490502] EDAC amd64: This node reports that Memory ECC is
> currently disabled, set F3x44[22] (0000:00:18.3).
> [ 14.490515] EDAC amd64: ECC disabled in the BIOS or no ECC
> capability, module will not load.
> [ 14.490516] Either enable ECC checking or force module loading by
> setting 'ecc_enable_override'.
> [ 14.490517] (Note that use of the override may cause unknown side
> effects.)
> [ 14.490547] amd64_edac: probe of 0000:00:18.2 failed with error -22
> [ 14.491881] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low)
> -> IRQ 16
> [ 14.546655] Console: switching to colour frame buffer device 80x30
> [ 16.040617] r8169: eth0: link up
> [ 16.040610] r8169: eth0: link up
> [ 16.082716] type=1505 audit(1336197347.872:5):
> operation="profile_load" pid=994
> name="/usr/share/gdm/guest-session/Xsession"
> [ 16.084511] type=1505 audit(1336197347.872:6):
> operation="profile_replace" pid=995 name="/sbin/dhclient3"
> [ 16.084738] type=1505 audit(1336197347.872:7):
> operation="profile_replace" pid=995
> name="/usr/lib/NetworkManager/nm-dhcp-client.action"
> [ 16.084871] type=1505 audit(1336197347.872:8):
> operation="profile_replace" pid=995
> name="/usr/lib/connman/scripts/dhclient-script"
> [ 16.088765] type=1505 audit(1336197347.872:9):
> operation="profile_load" pid=998 name="/usr/lib/cups/backend/cups-pdf"
> [ 16.089061] type=1505 audit(1336197347.872:10):
> operation="profile_load" pid=998 name="/usr/sbin/cupsd"
> [ 16.096688] type=1505 audit(1336197347.882:11):
> operation="profile_load" pid=996 name="/usr/bin/evince"
> [ 16.415458] ppdev: user-space parallel port driver
> [ 16.791292] CPU0 attaching NULL sched-domain.
> [ 16.791298] CPU1 attaching NULL sched-domain.
> [ 17.030087] CPU0 attaching sched-domain:
> [ 17.030090] domain 0: span 0-1 level MC
> [ 17.030092] groups: 0 1
> [ 17.030097] CPU1 attaching sched-domain:
> [ 17.030098] domain 0: span 0-1 level MC
> [ 17.030100] groups: 1 0
> [ 17.250213] r8169: WARNING! Changing of MTU on this NIC may lead to
> frame reception errors!
> [ 20.630060] CPU0 attaching NULL sched-domain.
> [ 20.630068] CPU1 attaching NULL sched-domain.
> [ 20.670939] CPU0 attaching sched-domain:
> [ 20.670944] domain 0: span 0-1 level MC
> [ 20.670946] groups: 0 1
> [ 20.670952] CPU1 attaching sched-domain:
> [ 20.670954] domain 0: span 0-1 level MC
> [ 20.670956] groups: 1 0
> [ 26.670016] eth0: no IPv6 routers present
> [ 414.882463] __ratelimit: 15 callbacks suppressed
> [ 414.882468] npviewer.bin[1967]: segfault at 218 ip 00000000f5b6e9c6
> sp 00000000ffec2998 error 6 in libflashplayer.so[f5842000+fc8000]
> [ 505.036282] sd 6:0:0:1: [sdd] Device not ready
> [ 505.036287] sd 6:0:0:1: [sdd] Result: hostbyte=DID_OK
> driverbyte=DRIVER_SENSE
> [ 505.036290] sd 6:0:0:1: [sdd] Sense Key : Not Ready [current]
> [ 505.036294] Info fld=0x0
> [ 505.036295] sd 6:0:0:1: [sdd] Add. Sense: Medium not present
> [ 505.036301] sd 6:0:0:1: [sdd] CDB: Read(10): 28 00 00 00 22 00 00 00
> 08 00
> [ 505.036307] end_request: I/O error, dev sdd, sector 8704
> [ 505.036312] Buffer I/O error on device sdd1, logical block 64
> [ 505.037278] sd 6:0:0:1: [sdd] Device not ready
> [ 505.037282] sd 6:0:0:1: [sdd] Result: hostbyte=DID_OK
> driverbyte=DRIVER_SENSE
> [ 505.037285] sd 6:0:0:1: [sdd] Sense Key : Not Ready [current]
> [ 505.037288] Info fld=0x0
> [ 505.037290] sd 6:0:0:1: [sdd] Add. Sense: Medium not present
> [ 505.037295] sd 6:0:0:1: [sdd] CDB: Read(10): 28 00 00 00 22 00 00 00
> 08 00
> [ 505.037302] end_request: I/O error, dev sdd, sector 8704
> [ 505.037306] Buffer I/O error on device sdd1, logical block 64
> [ 505.038270] sd 6:0:0:1: [sdd] Device not ready
> [ 505.038272] sd 6:0:0:1: [sdd] Result: hostbyte=DID_OK
> driverbyte=DRIVER_SENSE
> [ 505.038274] sd 6:0:0:1: [sdd] Sense Key : Not Ready [current]
> [ 505.038277] Info fld=0x0
> [ 505.038278] sd 6:0:0:1: [sdd] Add. Sense: Medium not present
> [ 505.038281] sd 6:0:0:1: [sdd] CDB: Read(10): 28 00 00 00 20 20 00 00
> 08 00
> [ 505.038287] end_request: I/O error, dev sdd, sector 8224
> [ 505.038289] Buffer I/O error on device sdd1, logical block 4
> [ 505.039149] sd 6:0:0:1: [sdd] Device not ready
> [ 505.039153] sd 6:0:0:1: [sdd] Result: hostbyte=DID_OK
> driverbyte=DRIVER_SENSE
> [ 505.039155] sd 6:0:0:1: [sdd] Sense Key : Not Ready [current]
> [ 505.039158] Info fld=0x0
> [ 505.039159] sd 6:0:0:1: [sdd] Add. Sense: Medium not present
> [ 505.039164] sd 6:0:0:1: [sdd] CDB: Read(10): 28 00 00 00 20 20 00 00
> 08 00
> [ 505.039169] end_request: I/O error, dev sdd, sector 8224
> [ 505.039173] Buffer I/O error on device sdd1, logical block 4
> [ 505.040270] sd 6:0:0:1: [sdd] Device not ready
> [ 505.040273] sd 6:0:0:1: [sdd] Result: hostbyte=DID_OK
> driverbyte=DRIVER_SENSE
> [ 505.040275] sd 6:0:0:1: [sdd] Sense Key : Not Ready [current]
> [ 505.040278] Info fld=0x0
> [ 505.040279] sd 6:0:0:1: [sdd] Add. Sense: Medium not present
> [ 505.040282] sd 6:0:0:1: [sdd] CDB: Read(10): 28 00 00 00 30 00 00 00
> 08 00
> [ 505.040287] end_request: I/O error, dev sdd, sector 12288
> [ 505.040290] Buffer I/O error on device sdd1, logical block 512
> [ 505.041267] sd 6:0:0:1: [sdd] Device not ready
> [ 505.041269] sd 6:0:0:1: [sdd] Result: hostbyte=DID_OK
> driverbyte=DRIVER_SENSE
> [ 505.041271] sd 6:0:0:1: [sdd] Sense Key : Not Ready [current]
> [ 505.041274] Info fld=0x0
> [ 505.041275] sd 6:0:0:1: [sdd] Add. Sense: Medium not present
> [ 505.041278] sd 6:0:0:1: [sdd] CDB: Read(10): 28 00 00 00 30 00 00 00
> 08 00
> [ 505.041283] end_request: I/O error, dev sdd, sector 12288
> [ 505.041285] Buffer I/O error on device sdd1, logical block 512
> [ 626.150038] usb 2-5: USB disconnect, address 2
>
>
>
>
Подробная информация о списке рассылки ubuntu-ru