тормоза при копировании на флешку

Максим maxyer на mail.ru
Сб Май 5 06:14:26 UTC 2012


> разбирайтесь со своим там убунтовиндоколхозом и доложите о 
> (не)результативных результатах и предпринятых исследовательских 
> исследованиях.
Кароче, отформатировал ЦД в ext3 и в NTFS - разницы не ощутил.

> 
> а заодно залезьте в интернеты и найдите статью "как правильно задавать 
> вопросы"
> очень прям хорошая она.
> 
Статью не нашел.
Дайте ссылку.

А вот и dmesg, но я там ничего не понимаю.


 0.336262] pnp: PnP ACPI: found 14 devices
[    0.336264] ACPI: ACPI bus type pnp unregistered
[    0.336275] system 00:07: iomem range 0xfec00000-0xfec00fff could not
be reserved
[    0.336278] system 00:07: iomem range 0xfee00000-0xfee00fff has been
reserved
[    0.336284] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.336286] system 00:08: ioport range 0x40b-0x40b has been reserved
[    0.336288] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
[    0.336290] system 00:08: ioport range 0xc00-0xc01 has been reserved
[    0.336293] system 00:08: ioport range 0xc14-0xc14 has been reserved
[    0.336295] system 00:08: ioport range 0xc50-0xc51 has been reserved
[    0.336297] system 00:08: ioport range 0xc52-0xc52 has been reserved
[    0.336300] system 00:08: ioport range 0xc6c-0xc6c has been reserved
[    0.336302] system 00:08: ioport range 0xc6f-0xc6f has been reserved
[    0.336304] system 00:08: ioport range 0xcd0-0xcd1 has been reserved
[    0.336307] system 00:08: ioport range 0xcd2-0xcd3 has been reserved
[    0.336309] system 00:08: ioport range 0xcd4-0xcd5 has been reserved
[    0.336311] system 00:08: ioport range 0xcd6-0xcd7 has been reserved
[    0.336314] system 00:08: ioport range 0xcd8-0xcdf has been reserved
[    0.336316] system 00:08: ioport range 0x800-0x89f has been reserved
[    0.336318] system 00:08: ioport range 0xb00-0xb0f has been reserved
[    0.336321] system 00:08: ioport range 0xb20-0xb3f has been reserved
[    0.336323] system 00:08: ioport range 0x900-0x90f has been reserved
[    0.336325] system 00:08: ioport range 0x910-0x91f has been reserved
[    0.336328] system 00:08: ioport range 0xfe00-0xfefe has been
reserved
[    0.336330] system 00:08: iomem range 0xffb80000-0xffbfffff has been
reserved
[    0.336333] system 00:08: iomem range 0xfec10000-0xfec1001f has been
reserved
[    0.336338] system 00:0b: ioport range 0x280-0x28f has been reserved
[    0.336340] system 00:0b: ioport range 0x290-0x29f has been reserved
[    0.336349] system 00:0c: iomem range 0xe0000000-0xefffffff has been
reserved
[    0.336354] system 00:0d: iomem range 0xfec00000-0xffffffff could not
be reserved
[    0.341042] Switching to clocksource acpi_pm
[    0.341321] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
[    0.341321] pci 0000:00:02.0:   IO window: 0xe000-0xefff
[    0.341321] pci 0000:00:02.0:   MEM window: 0xfa000000-0xfebfffff
[    0.341321] pci 0000:00:02.0:   PREFETCH window:
0x000000d0000000-0x000000dfffffff
[    0.341321] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:01
[    0.341321] pci 0000:00:0a.0:   IO window: 0xd000-0xdfff
[    0.341321] pci 0000:00:0a.0:   MEM window: 0xf9f00000-0xf9ffffff
[    0.341321] pci 0000:00:0a.0:   PREFETCH window:
0x000000cff00000-0x000000cfffffff
[    0.341321] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03
[    0.341321] pci 0000:00:14.4:   IO window: disabled
[    0.341321] pci 0000:00:14.4:   MEM window: disabled
[    0.341321] pci 0000:00:14.4:   PREFETCH window: disabled
[    0.341321]   alloc irq_desc for 18 on node 0
[    0.341321]   alloc kstat_irqs on node 0
[    0.341321] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ
18
[    0.341321] pci 0000:00:02.0: setting latency timer to 64
[    0.341321] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ
18
[    0.341321] pci 0000:00:0a.0: setting latency timer to 64
[    0.341321] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.341321] pci_bus 0000:00: resource 1 mem:
[0x000000-0xffffffffffffffff]
[    0.341321] pci_bus 0000:02: resource 0 io:  [0xe000-0xefff]
[    0.341321] pci_bus 0000:02: resource 1 mem: [0xfa000000-0xfebfffff]
[    0.341321] pci_bus 0000:02: resource 2 pref mem
[0xd0000000-0xdfffffff]
[    0.341321] pci_bus 0000:01: resource 0 io:  [0xd000-0xdfff]
[    0.341321] pci_bus 0000:01: resource 1 mem: [0xf9f00000-0xf9ffffff]
[    0.341321] pci_bus 0000:01: resource 2 pref mem
[0xcff00000-0xcfffffff]
[    0.341321] pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
[    0.341321] pci_bus 0000:03: resource 4 mem:
[0x000000-0xffffffffffffffff]
[    0.341321] NET: Registered protocol family 2
[    0.341321] IP route cache hash table entries: 65536 (order: 7,
524288 bytes)
[    0.341321] TCP established hash table entries: 262144 (order: 10,
4194304 bytes)
[    0.343184] TCP bind hash table entries: 65536 (order: 8, 1048576
bytes)
[    0.343743] TCP: Hash tables configured (established 262144 bind
65536)
[    0.343745] TCP reno registered
[    0.343876] NET: Registered protocol family 1
[    0.343998] pci 0000:02:00.0: Boot video device
[    0.345011] Scanning for low memory corruption every 60 seconds
[    0.345122] audit: initializing netlink socket (disabled)
[    0.345131] type=2000 audit(1336222532.340:1): initialized
[    0.352548] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.353721] VFS: Disk quotas dquot_6.5.2
[    0.353768] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.354290] fuse init (API version 7.13)
[    0.354357] msgmni has been set to 4000
[    0.354542] alg: No test for stdrng (krng)
[    0.354583] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[    0.354586] io scheduler noop registered
[    0.354587] io scheduler anticipatory registered
[    0.354589] io scheduler deadline registered
[    0.354638] io scheduler cfq registered (default)
[    0.354782]   alloc irq_desc for 24 on node 0
[    0.354784]   alloc kstat_irqs on node 0
[    0.354792] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
[    0.354799] pcieport 0000:00:02.0: setting latency timer to 64
[    0.354900]   alloc irq_desc for 25 on node 0
[    0.354901]   alloc kstat_irqs on node 0
[    0.354906] pcieport 0000:00:0a.0: irq 25 for MSI/MSI-X
[    0.354911] pcieport 0000:00:0a.0: setting latency timer to 64
[    0.354972] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.354993] pciehp: PCI Express Hot Plug Controller Driver version:
0.4
[    0.355088] input: Power Button
as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.355092] ACPI: Power Button [PWRB]
[    0.355132] input: Power Button
as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.355134] ACPI: Power Button [PWRF]
[    0.355478] processor LNXCPU:00: registered as cooling_device0
[    0.355508] processor LNXCPU:01: registered as cooling_device1
[    0.357261] ACPI Error: No handler for Region [SACS]
(ffff88007db3aa68) [PCI_Config] (20090903/evregion-319)
[    0.357266] ACPI Error: Region PCI_Config(2) has no handler
(20090903/exfldio-295)
[    0.357270] ACPI Error (psparse-0537): Method parse/execution failed
[\PRID.P_D0._STA] (Node ffff88007d0481e0), AE_NOT_EXIST
[    0.357291] ACPI Error (uteval-0250): Method execution failed
[\PRID.P_D0._STA] (Node ffff88007d0481e0), AE_NOT_EXIST
[    0.357311] ACPI Error: No handler for Region [SACS]
(ffff88007db3aa68) [PCI_Config] (20090903/evregion-319)
[    0.357315] ACPI Error: Region PCI_Config(2) has no handler
(20090903/exfldio-295)
[    0.357319] ACPI Error (psparse-0537): Method parse/execution failed
[\PRID.P_D1._STA] (Node ffff88007d0482c0), AE_NOT_EXIST
[    0.357338] ACPI Error (uteval-0250): Method execution failed
[\PRID.P_D1._STA] (Node ffff88007d0482c0), AE_NOT_EXIST
[    0.357365] ACPI Error: No handler for Region [SACS]
(ffff88007db3aa68) [PCI_Config] (20090903/evregion-319)
[    0.357369] ACPI Error: Region PCI_Config(2) has no handler
(20090903/exfldio-295)
[    0.357373] ACPI Error (psparse-0537): Method parse/execution failed
[\SECD.S_D0._STA] (Node ffff88007d0484a0), AE_NOT_EXIST
[    0.357392] ACPI Error (uteval-0250): Method execution failed
[\SECD.S_D0._STA] (Node ffff88007d0484a0), AE_NOT_EXIST
[    0.357412] ACPI Error: No handler for Region [SACS]
(ffff88007db3aa68) [PCI_Config] (20090903/evregion-319)
[    0.357415] ACPI Error: Region PCI_Config(2) has no handler
(20090903/exfldio-295)
[    0.357419] ACPI Error (psparse-0537): Method parse/execution failed
[\SECD.S_D1._STA] (Node ffff88007d048580), AE_NOT_EXIST
[    0.357439] ACPI Error (uteval-0250): Method execution failed
[\SECD.S_D1._STA] (Node ffff88007d048580), AE_NOT_EXIST
[    0.358610] hpet_acpi_add: no address or irqs in _CRS
[    0.358622] Linux agpgart interface v0.103
[    0.358652] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.358767] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.359056] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.359882] brd: module loaded
[    0.360344] loop: module loaded
[    0.360420] input: Macintosh mouse button emulation
as /devices/virtual/input/input2
[    0.360611]   alloc irq_desc for 16 on node 0
[    0.360613]   alloc kstat_irqs on node 0
[    0.360619] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[    0.360657] pata_acpi 0000:00:14.1: setting latency timer to 64
[    0.360945] Fixed MDIO Bus: probed
[    0.360972] PPP generic driver version 2.4.2
[    0.360999] tun: Universal TUN/TAP device driver, 1.6
[    0.361001] tun: (C) 1999-2004 Max Krasnyansky <maxk на qualcomm.com>
[    0.361067] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
[    0.361115]   alloc irq_desc for 17 on node 0
[    0.361117]   alloc kstat_irqs on node 0
[    0.361120] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low)
-> IRQ 17
[    0.361139] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    0.361169] ehci_hcd 0000:00:12.2: new USB bus registered, assigned
bus number 1
[    0.361206] ehci_hcd 0000:00:12.2: debug port 1
[    0.361231] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf9eff000
[    0.380026] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    0.380102] usb usb1: configuration #1 chosen from 1 choice
[    0.380126] hub 1-0:1.0: USB hub found
[    0.380134] hub 1-0:1.0: 6 ports detected
[    0.380213]   alloc irq_desc for 19 on node 0
[    0.380214]   alloc kstat_irqs on node 0
[    0.380218] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[    0.380232] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    0.380259] ehci_hcd 0000:00:13.2: new USB bus registered, assigned
bus number 2
[    0.380289] ehci_hcd 0000:00:13.2: debug port 1
[    0.380308] ehci_hcd 0000:00:13.2: irq 19, io mem 0xf9efa800
[    0.400018] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    0.400073] usb usb2: configuration #1 chosen from 1 choice
[    0.400095] hub 2-0:1.0: USB hub found
[    0.400101] hub 2-0:1.0: 6 ports detected
[    0.400157] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.400191] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[    0.400201] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    0.400232] ohci_hcd 0000:00:12.0: new USB bus registered, assigned
bus number 3
[    0.400256] ohci_hcd 0000:00:12.0: irq 16, io mem 0xf9efe000
[    0.454263] Freeing initrd memory: 8172k freed
[    0.464085] usb usb3: configuration #1 chosen from 1 choice
[    0.464107] hub 3-0:1.0: USB hub found
[    0.464116] hub 3-0:1.0: 3 ports detected
[    0.464249] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[    0.464257] ohci_hcd 0000:00:12.1: OHCI Host Controller
[    0.464298] ohci_hcd 0000:00:12.1: new USB bus registered, assigned
bus number 4
[    0.464315] ohci_hcd 0000:00:12.1: irq 16, io mem 0xf9efd000
[    0.524085] usb usb4: configuration #1 chosen from 1 choice
[    0.524109] hub 4-0:1.0: USB hub found
[    0.524118] hub 4-0:1.0: 3 ports detected
[    0.524217] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low)
-> IRQ 18
[    0.524226] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    0.524256] ohci_hcd 0000:00:13.0: new USB bus registered, assigned
bus number 5
[    0.524278] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf9efc000
[    0.584086] usb usb5: configuration #1 chosen from 1 choice
[    0.584110] hub 5-0:1.0: USB hub found
[    0.584118] hub 5-0:1.0: 3 ports detected
[    0.584215] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low)
-> IRQ 18
[    0.584224] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    0.584254] ohci_hcd 0000:00:13.1: new USB bus registered, assigned
bus number 6
[    0.584272] ohci_hcd 0000:00:13.1: irq 18, io mem 0xf9efb000
[    0.644081] usb usb6: configuration #1 chosen from 1 choice
[    0.644103] hub 6-0:1.0: USB hub found
[    0.644112] hub 6-0:1.0: 3 ports detected
[    0.644211] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[    0.644222] ohci_hcd 0000:00:14.5: OHCI Host Controller
[    0.644252] ohci_hcd 0000:00:14.5: new USB bus registered, assigned
bus number 7
[    0.644269] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf9ef9000
[    0.704084] usb usb7: configuration #1 chosen from 1 choice
[    0.704106] hub 7-0:1.0: USB hub found
[    0.704114] hub 7-0:1.0: 2 ports detected
[    0.704185] uhci_hcd: USB Universal Host Controller Interface driver
[    0.704264] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.704266] PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp
[    0.704929] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.705049] mice: PS/2 mouse device common for all mice
[    0.705143] rtc_cmos 00:02: RTC can wake from S4
[    0.705184] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.705208] rtc0: alarms up to one month, y3k, 114 bytes nvram
[    0.705322] device-mapper: uevent: version 1.0.3
[    0.705446] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01)
initialised: dm-devel на redhat.com
[    0.705592] device-mapper: multipath: version 1.1.0 loaded
[    0.705595] device-mapper: multipath round-robin: version 1.0.0
loaded
[    0.705838] cpuidle: using governor ladder
[    0.705840] cpuidle: using governor menu
[    0.706156] TCP cubic registered
[    0.706279] NET: Registered protocol family 10
[    0.706956] NET: Registered protocol family 17
[    0.706991] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core
Processor 5200+ processors (2 cpu cores) (version 2.20.00)
[    0.707000] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS
objects found.
[    0.707001] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[    0.707083] PM: Resume from disk failed.
[    0.707095] registered taskstats version 1
[    0.707432]   Magic number: 12:530:935
[    0.707524] rtc_cmos 00:02: setting system clock to 2012-05-05
12:55:32 UTC (1336222532)
[    0.707526] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.707528] EDD information not available.
[    0.707583] Freeing unused kernel memory: 884k freed
[    0.708039] Write protecting the kernel read-only data: 7716k
[    0.722393] input: AT Translated Set 2 keyboard
as /devices/platform/i8042/serio0/input/input3
[    0.722659] udev: starting version 151
[    0.784107] ahci 0000:00:11.0: version 3.0
[    0.784130]   alloc irq_desc for 22 on node 0
[    0.784133]   alloc kstat_irqs on node 0
[    0.784141] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) ->
IRQ 22
[    0.784195]   alloc irq_desc for 26 on node 0
[    0.784197]   alloc kstat_irqs on node 0
[    0.784208] ahci 0000:00:11.0: irq 26 for MSI/MSI-X
[    0.784315] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps
0xf impl SATA mode
[    0.784318] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo
pmp pio slum part ccc 
[    0.792289] scsi0 : ahci
[    0.803478] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.803500] r8169 0000:01:00.0: PCI INT A -> GSI 18 (level, low) ->
IRQ 18
[    0.803538] r8169 0000:01:00.0: setting latency timer to 64
[    0.803575]   alloc irq_desc for 27 on node 0
[    0.803577]   alloc kstat_irqs on node 0
[    0.803589] r8169 0000:01:00.0: irq 27 for MSI/MSI-X
[    0.804117] eth0: RTL8168d/8111d at 0xffffc90000356000,
00:19:66:e6:68:b9, XID 081000c0 IRQ 27
[    0.826497] Floppy drive(s): fd0 is 1.44M
[    0.844673] FDC 0 is a post-1991 82077
[    0.854822] scsi1 : ahci
[    0.854916] scsi2 : ahci
[    0.854979] scsi3 : ahci
[    0.855022] ata1: SATA max UDMA/133 abar m1024 на 0xf9eff800 port
0xf9eff900 irq 26
[    0.855025] ata2: SATA max UDMA/133 abar m1024 на 0xf9eff800 port
0xf9eff980 irq 26
[    0.855029] ata3: SATA max UDMA/133 abar m1024 на 0xf9eff800 port
0xf9effa00 irq 26
[    0.855032] ata4: SATA max UDMA/133 abar m1024 на 0xf9eff800 port
0xf9effa80 irq 26
[    0.855268] scsi4 : pata_atiixp
[    0.855363] scsi5 : pata_atiixp
[    0.856587] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00
irq 14
[    0.856589] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08
irq 15
[    0.970027] usb 3-3: new low speed USB device using ohci_hcd and
address 2
[    1.094453] ata5.00: ATA-7: WDC WD1600AAJS-75PSA0, 05.06H05, max
UDMA/133
[    1.094456] ata5.00: 312500000 sectors, multi 16: LBA48 NCQ (depth
0/32)
[    1.094481] ata5.01: ATAPI: Optiarc DVD RW AD-7170S, 1.02, max
UDMA/66
[    1.130574] ata5.00: configured for UDMA/100
[    1.154187] usb 3-3: configuration #1 chosen from 1 choice
[    1.180421] ata5.01: configured for UDMA/66
[    1.200056] ata1: SATA link down (SStatus 0 SControl 300)
[    1.200868] ata2: SATA link down (SStatus 0 SControl 300)
[    1.200898] ata3: SATA link down (SStatus 0 SControl 300)
[    1.270025] usb 2-5: new high speed USB device using ehci_hcd and
address 2
[    1.370036] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.373293] ata4.00: ATA-8: WDC WD15EARS-00Z5B1, 80.00A80, max
UDMA/133
[    1.373296] ata4.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[    1.376669] ata4.00: configured for UDMA/133
[    1.390163] scsi 3:0:0:0: Direct-Access     ATA      WDC WD15EARS-00Z
80.0 PQ: 0 ANSI: 5
[    1.390302] sd 3:0:0:0: [sda] 2930277168 512-byte logical blocks:
(1.50 TB/1.36 TiB)
[    1.390324] sd 3:0:0:0: Attached scsi generic sg0 type 0
[    1.390398] sd 3:0:0:0: [sda] Write Protect is off
[    1.390401] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.390423] sd 3:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[    1.390448] scsi 4:0:0:0: Direct-Access     ATA      WDC WD1600AAJS-7
05.0 PQ: 0 ANSI: 5
[    1.390554] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    1.390559]  sda:
[    1.391028] sd 4:0:0:0: [sdb] 312500000 512-byte logical blocks: (160
GB/149 GiB)
[    1.391628] scsi 4:0:1:0: CD-ROM            Optiarc  DVD RW AD-7170S
1.02 PQ: 0 ANSI: 5
[    1.391656] sd 4:0:0:0: [sdb] Write Protect is off
[    1.391658] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.391676] sd 4:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[    1.395564] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw
xa/form2 cdda tray
[    1.395567] Uniform CD-ROM driver Revision: 3.20
[    1.395597]  sdb:
[    1.395657] sr 4:0:1:0: Attached scsi CD-ROM sr0
[    1.395695] sr 4:0:1:0: Attached scsi generic sg2 type 5
[    1.396080]  sda1
[    1.396292] sd 3:0:0:0: [sda] Attached SCSI disk
[    1.402688]  sdb1 sdb2 < sdb5
[    1.422688] usb 2-5: configuration #1 chosen from 1 choice
[    1.429242] Initializing USB Mass Storage driver...
[    1.429427] scsi6 : SCSI emulation for USB Mass Storage devices
[    1.429525] usb-storage: device found at 2
[    1.429527] usb-storage: waiting for device to settle before scanning
[    1.429535] usbcore: registered new interface driver usb-storage
[    1.429537] USB Mass Storage support registered.
[    1.440741]  sdb6 sdb7 sdb8 >
[    1.459373] sd 4:0:0:0: [sdb] Attached SCSI disk
[    1.570601] ata6.00: ATAPI: TOSHIBA ODD-DVD SD-R5272, 1030, max
UDMA/33
[    1.610557] ata6.00: configured for UDMA/33
[    1.616916] scsi 5:0:0:0: CD-ROM            TOSHIBA  ODD-DVD SD-R5272
1030 PQ: 0 ANSI: 5
[    1.624965] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda
tray
[    1.625040] sr 5:0:0:0: Attached scsi CD-ROM sr1
[    1.625098] sr 5:0:0:0: Attached scsi generic sg3 type 5
[    1.628867] usbcore: registered new interface driver hiddev
[    1.634439] input: Logitech USB-PS/2 Optical Mouse
as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input4
[    1.634534] generic-usb 0003:046D:C00E.0001: input,hidraw0: USB HID
v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on
usb-0000:00:12.0-3/input0
[    1.634567] usbcore: registered new interface driver usbhid
[    1.634570] usbhid: v2.6:USB HID core driver
[    2.118785] EXT4-fs (sdb6): mounted filesystem with ordered data mode
[    6.420255] usb-storage: device scan complete
[    6.420845] scsi 6:0:0:0: Direct-Access     Generic- Compact Flash
1.01 PQ: 0 ANSI: 0
[    6.421337] scsi 6:0:0:1: Direct-Access     Multiple Flash Reader
1.05 PQ: 0 ANSI: 0
[    6.421816] sd 6:0:0:0: Attached scsi generic sg4 type 0
[    6.421946] sd 6:0:0:1: Attached scsi generic sg5 type 0
[    6.916430] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[    6.917057] sd 6:0:0:1: [sdd] 7716864 512-byte logical blocks: (3.95
GB/3.67 GiB)
[    6.917807] sd 6:0:0:1: [sdd] Write Protect is off
[    6.917810] sd 6:0:0:1: [sdd] Mode Sense: 03 00 00 00
[    6.917812] sd 6:0:0:1: [sdd] Assuming drive cache: write through
[    6.920059] sd 6:0:0:1: [sdd] Assuming drive cache: write through
[    6.920062]  sdd: sdd1
[    6.922925] sd 6:0:0:1: [sdd] Assuming drive cache: write through
[    6.922928] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[   13.845631] udev: starting version 151
[   13.848559] Adding 1998840k swap on /dev/sdb7.  Priority:-1 extents:1
across:1998840k 
[   13.909854] vga16fb: initializing
[   13.909860] vga16fb: mapped to 0xffff8800000a0000
[   13.909965] fb0: VGA16 VGA frame buffer device
[   13.979356] lp: driver loaded but no devices found
[   14.053126] type=1505 audit(1336197345.843:2):
operation="profile_load" pid=609 name="/sbin/dhclient3"
[   14.053357] type=1505 audit(1336197345.843:3):
operation="profile_load" pid=609
name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   14.053491] type=1505 audit(1336197345.843:4):
operation="profile_load" pid=609
name="/usr/lib/connman/scripts/dhclient-script"
[   14.164093] nvidia: module license 'NVIDIA' taints kernel.
[   14.164096] Disabling lock debugging due to kernel taint
[   14.340341] ACPI: resource piix4_smbus [0xb00-0xb07] conflicts with
ACPI region SOR1 [0xb00-0xb0f]
[   14.340346] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[   14.346567] EDAC MC: Ver: 2.1.0 Jan  4 2012
[   14.352364] nvidia 0000:02:00.0: PCI INT A -> GSI 18 (level, low) ->
IRQ 18
[   14.352375] nvidia 0000:02:00.0: setting latency timer to 64
[   14.352380] vgaarb: device changed decodes:
PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   14.353102] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  290.10
Wed Nov 16 17:39:29 PST 2011
[   14.355145] k8temp 0000:00:18.3: Temperature readouts might be wrong
- check erratum #141
[   14.366972] EDAC amd64_edac:  Ver: 3.2.0 Jan  4 2012
[   14.466018] EXT4-fs (sdb8): mounted filesystem with ordered data mode
[   14.490502] EDAC amd64: This node reports that Memory ECC is
currently disabled, set F3x44[22] (0000:00:18.3).
[   14.490515] EDAC amd64: ECC disabled in the BIOS or no ECC
capability, module will not load.
[   14.490516]  Either enable ECC checking or force module loading by
setting 'ecc_enable_override'.
[   14.490517]  (Note that use of the override may cause unknown side
effects.)
[   14.490547] amd64_edac: probe of 0000:00:18.2 failed with error -22
[   14.491881] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[   14.546655] Console: switching to colour frame buffer device 80x30
[   16.040617] r8169: eth0: link up
[   16.040610] r8169: eth0: link up
[   16.082716] type=1505 audit(1336197347.872:5):
operation="profile_load" pid=994
name="/usr/share/gdm/guest-session/Xsession"
[   16.084511] type=1505 audit(1336197347.872:6):
operation="profile_replace" pid=995 name="/sbin/dhclient3"
[   16.084738] type=1505 audit(1336197347.872:7):
operation="profile_replace" pid=995
name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   16.084871] type=1505 audit(1336197347.872:8):
operation="profile_replace" pid=995
name="/usr/lib/connman/scripts/dhclient-script"
[   16.088765] type=1505 audit(1336197347.872:9):
operation="profile_load" pid=998 name="/usr/lib/cups/backend/cups-pdf"
[   16.089061] type=1505 audit(1336197347.872:10):
operation="profile_load" pid=998 name="/usr/sbin/cupsd"
[   16.096688] type=1505 audit(1336197347.882:11):
operation="profile_load" pid=996 name="/usr/bin/evince"
[   16.415458] ppdev: user-space parallel port driver
[   16.791292] CPU0 attaching NULL sched-domain.
[   16.791298] CPU1 attaching NULL sched-domain.
[   17.030087] CPU0 attaching sched-domain:
[   17.030090]  domain 0: span 0-1 level MC
[   17.030092]   groups: 0 1
[   17.030097] CPU1 attaching sched-domain:
[   17.030098]  domain 0: span 0-1 level MC
[   17.030100]   groups: 1 0
[   17.250213] r8169: WARNING! Changing of MTU on this NIC may lead to
frame reception errors!
[   20.630060] CPU0 attaching NULL sched-domain.
[   20.630068] CPU1 attaching NULL sched-domain.
[   20.670939] CPU0 attaching sched-domain:
[   20.670944]  domain 0: span 0-1 level MC
[   20.670946]   groups: 0 1
[   20.670952] CPU1 attaching sched-domain:
[   20.670954]  domain 0: span 0-1 level MC
[   20.670956]   groups: 1 0
[   26.670016] eth0: no IPv6 routers present
[  414.882463] __ratelimit: 15 callbacks suppressed
[  414.882468] npviewer.bin[1967]: segfault at 218 ip 00000000f5b6e9c6
sp 00000000ffec2998 error 6 in libflashplayer.so[f5842000+fc8000]
[  505.036282] sd 6:0:0:1: [sdd] Device not ready
[  505.036287] sd 6:0:0:1: [sdd] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[  505.036290] sd 6:0:0:1: [sdd] Sense Key : Not Ready [current] 
[  505.036294] Info fld=0x0
[  505.036295] sd 6:0:0:1: [sdd] Add. Sense: Medium not present
[  505.036301] sd 6:0:0:1: [sdd] CDB: Read(10): 28 00 00 00 22 00 00 00
08 00
[  505.036307] end_request: I/O error, dev sdd, sector 8704
[  505.036312] Buffer I/O error on device sdd1, logical block 64
[  505.037278] sd 6:0:0:1: [sdd] Device not ready
[  505.037282] sd 6:0:0:1: [sdd] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[  505.037285] sd 6:0:0:1: [sdd] Sense Key : Not Ready [current] 
[  505.037288] Info fld=0x0
[  505.037290] sd 6:0:0:1: [sdd] Add. Sense: Medium not present
[  505.037295] sd 6:0:0:1: [sdd] CDB: Read(10): 28 00 00 00 22 00 00 00
08 00
[  505.037302] end_request: I/O error, dev sdd, sector 8704
[  505.037306] Buffer I/O error on device sdd1, logical block 64
[  505.038270] sd 6:0:0:1: [sdd] Device not ready
[  505.038272] sd 6:0:0:1: [sdd] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[  505.038274] sd 6:0:0:1: [sdd] Sense Key : Not Ready [current] 
[  505.038277] Info fld=0x0
[  505.038278] sd 6:0:0:1: [sdd] Add. Sense: Medium not present
[  505.038281] sd 6:0:0:1: [sdd] CDB: Read(10): 28 00 00 00 20 20 00 00
08 00
[  505.038287] end_request: I/O error, dev sdd, sector 8224
[  505.038289] Buffer I/O error on device sdd1, logical block 4
[  505.039149] sd 6:0:0:1: [sdd] Device not ready
[  505.039153] sd 6:0:0:1: [sdd] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[  505.039155] sd 6:0:0:1: [sdd] Sense Key : Not Ready [current] 
[  505.039158] Info fld=0x0
[  505.039159] sd 6:0:0:1: [sdd] Add. Sense: Medium not present
[  505.039164] sd 6:0:0:1: [sdd] CDB: Read(10): 28 00 00 00 20 20 00 00
08 00
[  505.039169] end_request: I/O error, dev sdd, sector 8224
[  505.039173] Buffer I/O error on device sdd1, logical block 4
[  505.040270] sd 6:0:0:1: [sdd] Device not ready
[  505.040273] sd 6:0:0:1: [sdd] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[  505.040275] sd 6:0:0:1: [sdd] Sense Key : Not Ready [current] 
[  505.040278] Info fld=0x0
[  505.040279] sd 6:0:0:1: [sdd] Add. Sense: Medium not present
[  505.040282] sd 6:0:0:1: [sdd] CDB: Read(10): 28 00 00 00 30 00 00 00
08 00
[  505.040287] end_request: I/O error, dev sdd, sector 12288
[  505.040290] Buffer I/O error on device sdd1, logical block 512
[  505.041267] sd 6:0:0:1: [sdd] Device not ready
[  505.041269] sd 6:0:0:1: [sdd] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[  505.041271] sd 6:0:0:1: [sdd] Sense Key : Not Ready [current] 
[  505.041274] Info fld=0x0
[  505.041275] sd 6:0:0:1: [sdd] Add. Sense: Medium not present
[  505.041278] sd 6:0:0:1: [sdd] CDB: Read(10): 28 00 00 00 30 00 00 00
08 00
[  505.041283] end_request: I/O error, dev sdd, sector 12288
[  505.041285] Buffer I/O error on device sdd1, logical block 512
[  626.150038] usb 2-5: USB disconnect, address 2






Подробная информация о списке рассылки ubuntu-ru