WiFi подключение к сети.
Alex Emergy
alex.emergy на gmail.com
Ср Июл 4 09:12:02 UTC 2012
Я бы попробовал поставить compat-wireless из backports. Или собрать
самому из исходников:
http://linuxwireless.org/en/users/Download
Если коротко, раскомментировать backports в /etc/apt/sources.list,
поставить пакет
linux-backports-modules-cw-`uname -r`, перезагрузиться
04.07.12 7:42, Sergey Markelov пишет:
> Начинайте новую тему новым письмом, а не ответом на письмо из другой
> темы!
>
> 04.07.2012 3:45, Роман writes:
>> Есть ПК подключенный по WiFI
>> и во время старта Ubuntu 12.04 (serv) периодически не ловит точку и как следствие
>> приходится рестартовать службу сети.
>>
>> Хотелось бы настроить, чтобы ловила с 1 захода. Достает делать
>> рестарты.
>>
>> В качестве WiFI - USB адаптер ASUS
>> Bus 002 Device 002: ID 0b05:1784 ASUSTek Computer, Inc. USB-N13 802.11n Network Adapter [Ralink RT3072]
>>
>> вот конфигурация interfaces
>>
>> # The loopback network interface
>> auto lo
>> iface lo inet loopback
>>
>> # The primary network interface
>> auto wlan0
>> iface wlan0 inet static
>> wpa-ssid xan
>> wpa-ap-scan 1
>> wpa-proto RSN
>> wpa-pairwise CCMP
>> wpa-group TKIP
>> wpa-key-mgmt WPA-PSK
>> wpa-psk d388508f9f9ef92e033e422045f2d19f214febc3333e986a7462ef92d6b
>> address 192.168.1.10
>> netmask 255.255.255.0
>> gateway 192.168.1.1
>> dns-nameservers 81.88.208.202 81.88.208.250
>>
>>
>> при загрузке
>> 16.617725] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>> [ 41.476593] init: failsafe main process (981) killed by TERM signal
>> [ 41.481773] init: network-manager main process (1174) terminated with status 127
>> [ 41.481790] init: network-manager main process ended, respawning
>> [ 41.500194] type=1400 audit(1341347121.366:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp
>> -client.action" pid=1210 comm="apparmor_parser"
>>
>> [ 285.049826] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>> [ 285.410143] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>> [ 293.608951] wlan0: authenticate with bc:ae:c5:c4:98:2b (try 1)
>> [ 293.610462] wlan0: authenticated
>> [ 293.664698] wlan0: associate with bc:ae:c5:c4:98:2b (try 1)
>> [ 293.667582] wlan0: RX AssocResp from bc:ae:c5:c4:98:2b (capab=0x411 status=0 aid=4)
>> [ 293.667585] wlan0: associated
>> [ 293.696937] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>> [ 303.840005] wlan0: no IPv6 routers present
>> [ 368.680229] wlan0: deauthenticating from bc:ae:c5:c4:98:2b by local choice (reason=3)
>> [ 368.702484] cfg80211: All devices are disconnected, going to restore regulatory settings
>> [ 368.702489] cfg80211: Restoring regulatory settings
>> [ 368.702493] cfg80211: Calling CRDA to update world regulatory domain
>> [ 368.760226] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
>> [ 368.760230] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760233] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
>> [ 368.760236] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760239] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
>> [ 368.760241] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760244] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
>> [ 368.760246] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760249] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
>> [ 368.760252] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760254] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
>> [ 368.760257] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760259] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
>> [ 368.760262] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760264] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
>> [ 368.760267] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760270] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
>> [ 368.760273] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760275] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
>> [ 368.760278] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760280] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
>> [ 368.760283] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760285] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
>> [ 368.760288] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760291] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
>> [ 368.760294] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760296] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
>> [ 368.760299] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760302] cfg80211: World regulatory domain updated:
>> [ 368.760304] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>> [ 368.760307] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760310] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760312] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760315] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760317] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 369.069730] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>> [ 369.430059] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>> [ 371.392855] wlan0: authenticate with bc:ae:c5:c4:98:2b (try 1)
>> [ 293.610462] wlan0: authenticated
>> [ 293.664698] wlan0: associate with bc:ae:c5:c4:98:2b (try 1)
>> [ 293.667582] wlan0: RX AssocResp from bc:ae:c5:c4:98:2b (capab=0x411 status=0 aid=4)
>> [ 293.667585] wlan0: associated
>> [ 293.696937] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>> [ 303.840005] wlan0: no IPv6 routers present
>> [ 368.680229] wlan0: deauthenticating from bc:ae:c5:c4:98:2b by local choice (reason=3)
>> [ 368.702484] cfg80211: All devices are disconnected, going to restore regulatory settings
>> [ 368.702489] cfg80211: Restoring regulatory settings
>> [ 368.702493] cfg80211: Calling CRDA to update world regulatory domain
>> [ 368.760226] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
>> [ 368.760230] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760233] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
>> [ 368.760236] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760239] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
>> [ 368.760241] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760244] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
>> [ 368.760246] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760249] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
>> [ 368.760252] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760254] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
>> [ 368.760257] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760259] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
>> [ 368.760262] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760264] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
>> [ 368.760267] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760270] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
>> [ 368.760273] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760275] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
>> [ 368.760278] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760280] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
>> [ 368.760283] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760285] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
>> [ 368.760288] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760291] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
>> [ 368.760294] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760296] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
>> [ 368.760299] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760302] cfg80211: World regulatory domain updated:
>> [ 368.760304] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>> [ 368.760307] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760310] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760312] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760315] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 368.760317] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 369.069730] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>> [ 369.430059] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>> [ 371.392855] wlan0: authenticate with bc:ae:c5:c4:98:2b (try 1)
>> [ 371.394367] wlan0: authenticated
>> [ 371.411980] wlan0: associate with bc:ae:c5:c4:98:2b (try 1)
>> [ 371.414864] wlan0: RX AssocResp from bc:ae:c5:c4:98:2b (capab=0x411 status=0 aid=4)
>> [ 371.414868] wlan0: associated
>> [ 371.440841] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>> [ 382.400005] wlan0: no IPv6 routers present
>>
>>
>
--
Alex Emergy
Подробная информация о списке рассылки ubuntu-ru