Re: USB-

apollovy gmail.com
3 21:48:31 BST 2010


А под маздаем пробовали?

3 апреля 2010 г. 23:46 пользователь agent.hawk <agent.hawk  gmail.com>написал:

> У меня похожая проблема с 500Гб винтом.
>
> Решить ее пока не удалось.
>
> --- QUOTE ---
>
> Недавно приобрел USB жесткий диск ADATA SH93 на 500Гб,
> но ни Karmic, ни Lucid не хотят с ним работать.
>
> Одно замечание - если загрузиться с LiveCD Karmic-a (9.10) то он виден
> и можно его использовать.
>
> Кроме того, например, ArchLinux и Ubuntu Rescue Remix, на той же
> машине видят его, и позволяют с ним нормально работать. А вот Lucid ни
> в какую.
>
> Подозреваю что то ядром. Гуглил решение этого вопроса, но ничего не
> нашел толком, хотя гуглил достаточно хорошо.
>
> Когда подключаю жесткий диск то в /var/log/syslog появляются такие
> сообщения:
>
>
> ----------------------------------------------------------------------------------------------------------------
> Mar 18 15:24:01 merlin kernel: [ 2466.656104] usb 1-5: new high speed
> USB device using ehci_hcd and address 2
> Mar 18 15:24:01 merlin kernel: [ 2466.789033] usb 1-5: configuration
> #1 chosen from 1 choice
> Mar 18 15:24:02 merlin kernel: [ 2467.558594] Initializing USB Mass
> Storage driver...
> Mar 18 15:24:02 merlin kernel: [ 2467.558719] scsi4 : SCSI emulation
> for USB Mass Storage devices
> Mar 18 15:24:02 merlin kernel: [ 2467.558801] usbcore: registered new
> interface driver usb-storage
> Mar 18 15:24:02 merlin kernel: [ 2467.558804] USB Mass Storage support
> registered.
> Mar 18 15:24:02 merlin kernel: [ 2467.558934] usb-storage: device found at
> 2
> Mar 18 15:24:02 merlin kernel: [ 2467.558935] usb-storage: waiting for
> device to settle before scanning
> Mar 18 15:24:07 merlin kernel: [ 2472.556315] usb-storage: device scan
> complete
> Mar 18 15:24:07 merlin kernel: [ 2472.556828] scsi 4:0:0:0:
> Direct-Access     A-DATA   SH93                  PQ: 0 ANSI: 0
> Mar 18 15:24:07 merlin kernel: [ 2472.557549] sd 4:0:0:0: Attached
> scsi generic sg2 type 0
> Mar 18 15:24:07 merlin kernel: [ 2472.558176] sd 4:0:0:0: [sdb]
> 976773168 512-byte logical blocks: (500 GB/465 GiB)
> Mar 18 15:24:07 merlin kernel: [ 2472.558673] sd 4:0:0:0: [sdb] Write
> Protect is off
> Mar 18 15:24:07 merlin kernel: [ 2472.558675] sd 4:0:0:0: [sdb] Mode
> Sense: 03 00 00 00
> Mar 18 15:24:07 merlin kernel: [ 2472.558678] sd 4:0:0:0: [sdb]
> Assuming drive cache: write through
> Mar 18 15:24:07 merlin kernel: [ 2472.559796] sd 4:0:0:0: [sdb]
> Assuming drive cache: write through
> Mar 18 15:24:08 merlin kernel: [ 2472.559799]  sdb: sdb1 sdb2 sdb3 < sdb5
> sdb6 >
> Mar 18 15:24:08 merlin kernel: [ 2473.023042] sd 4:0:0:0: [sdb]
> Assuming drive cache: write through
> Mar 18 15:24:08 merlin kernel: [ 2473.023047] sd 4:0:0:0: [sdb]
> Attached SCSI disk
> Mar 18 15:24:22 merlin kernel: [ 2487.252293] sd 4:0:0:0: [sdb]
> Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
> Mar 18 15:24:22 merlin kernel: [ 2487.252299] sd 4:0:0:0: [sdb] Sense
> Key : Illegal Request [current]
> Mar 18 15:24:22 merlin kernel: [ 2487.252304] sd 4:0:0:0: [sdb] Add.
> Sense: Invalid command operation code
> Mar 18 15:24:22 merlin kernel: [ 2487.252309] sd 4:0:0:0: [sdb] CDB:
> Read(6): 08 00 00 3f 08 00
> Mar 18 15:24:22 merlin kernel: [ 2487.252315] end_request: I/O error,
> dev sdb, sector 63
> Mar 18 15:24:22 merlin kernel: [ 2487.252320] Buffer I/O error on
> device sdb1, logical block 0
> Mar 18 15:24:22 merlin kernel: [ 2487.252324] Buffer I/O error on
> device sdb1, logical block 1
> Mar 18 15:24:22 merlin kernel: [ 2487.253289] sd 4:0:0:0: [sdb]
> Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
> Mar 18 15:24:22 merlin kernel: [ 2487.253292] sd 4:0:0:0: [sdb] Sense
> Key : Illegal Request [current]
> Mar 18 15:24:22 merlin kernel: [ 2487.253296] sd 4:0:0:0: [sdb] Add.
> Sense: Invalid command operation code
> Mar 18 15:24:22 merlin kernel: [ 2487.253299] sd 4:0:0:0: [sdb] CDB:
> Read(6): 08 00 00 3f 04 00
> Mar 18 15:24:22 merlin kernel: [ 2487.253304] end_request: I/O error,
> dev sdb, sector 63
> Mar 18 15:24:22 merlin kernel: [ 2487.253307] Buffer I/O error on
> device sdb1, logical block 0
> Mar 18 15:24:22 merlin kernel: [ 2487.254164] sd 4:0:0:0: [sdb]
> Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
> Mar 18 15:24:22 merlin kernel: [ 2487.254166] sd 4:0:0:0: [sdb] Sense
> Key : Illegal Request [current]
> Mar 18 15:24:22 merlin kernel: [ 2487.254170] sd 4:0:0:0: [sdb] Add.
> Sense: Invalid command operation code
> Mar 18 15:24:22 merlin kernel: [ 2487.254173] sd 4:0:0:0: [sdb] CDB:
> Read(6): 08 00 00 43 04 00
> Mar 18 15:24:22 merlin kernel: [ 2487.254178] end_request: I/O error,
> dev sdb, sector 67
> Mar 18 15:24:22 merlin kernel: [ 2487.254180] Buffer I/O error on
> device sdb1, logical block 1
> Mar 18 15:24:22 merlin kernel: [ 2487.255039] sd 4:0:0:0: [sdb]
> Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
> Mar 18 15:24:22 merlin kernel: [ 2487.255042] sd 4:0:0:0: [sdb] Sense
> Key : Illegal Request [current]
> Mar 18 15:24:22 merlin kernel: [ 2487.255045] sd 4:0:0:0: [sdb] Add.
> Sense: Invalid command operation code
> Mar 18 15:24:22 merlin kernel: [ 2487.255048] sd 4:0:0:0: [sdb] CDB:
> Read(6): 08 00 00 3f 04 00
> Mar 18 15:24:22 merlin kernel: [ 2487.255053] end_request: I/O error,
> dev sdb, sector 63
> Mar 18 15:24:22 merlin kernel: [ 2487.255056] Buffer I/O error on
> device sdb1, logical block 0
> Mar 18 15:24:22 merlin kernel: [ 2487.255914] sd 4:0:0:0: [sdb]
> Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
> Mar 18 15:24:22 merlin kernel: [ 2487.255917] sd 4:0:0:0: [sdb] Sense
> Key : Illegal Request [current]
> Mar 18 15:24:22 merlin kernel: [ 2487.255920] sd 4:0:0:0: [sdb] Add.
> Sense: Invalid command operation code
> Mar 18 15:24:22 merlin kernel: [ 2487.255923] sd 4:0:0:0: [sdb] CDB:
> Read(6): 08 00 00 43 04 00
> Mar 18 15:24:22 merlin kernel: [ 2487.255928] end_request: I/O error,
> dev sdb, sector 67
> Mar 18 15:24:22 merlin kernel: [ 2487.255931] Buffer I/O error on
> device sdb1, logical block 1
> Mar 18 15:24:22 merlin kernel: [ 2487.257047] sd 4:0:0:0: [sdb]
> Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
> Mar 18 15:24:22 merlin kernel: [ 2487.257050] sd 4:0:0:0: [sdb] Sense
> Key : Illegal Request [current]
> Mar 18 15:24:22 merlin kernel: [ 2487.257053] sd 4:0:0:0: [sdb] Add.
> Sense: Invalid command operation code
> Mar 18 15:24:22 merlin kernel: [ 2487.257057] sd 4:0:0:0: [sdb] CDB:
> Read(6): 08 00 00 3f 04 00
> Mar 18 15:24:22 merlin kernel: [ 2487.257063] end_request: I/O error,
> dev sdb, sector 63
> Mar 18 15:24:22 merlin kernel: [ 2487.257065] Buffer I/O error on
> device sdb1, logical block 0
> Mar 18 15:24:22 merlin kernel: [ 2487.257933] sd 4:0:0:0: [sdb]
> Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
> Mar 18 15:24:22 merlin kernel: [ 2487.257940] sd 4:0:0:0: [sdb] Sense
> Key : Illegal Request [current]
> Mar 18 15:24:22 merlin kernel: [ 2487.257945] sd 4:0:0:0: [sdb] Add.
> Sense: Invalid command operation code
> Mar 18 15:24:22 merlin kernel: [ 2487.257950] sd 4:0:0:0: [sdb] CDB:
> Read(6): 08 00 00 43 04 00
> Mar 18 15:24:22 merlin kernel: [ 2487.257956] end_request: I/O error,
> dev sdb, sector 67
>
> ----------------------------------------------------------------------------------------------------------------
>
>
> Диск 100% не битый, электроника работает, с диском все в порядке он
> абсолютно новый!
>
> Кто нибудь встречался с подобным, и может подсказать как это лечится?
>
> На ум приходят такие слова как таймауты и инициализация устройства но
> куда копать совершенно не представляю.
>
> --
> ubuntu-ru mailing list
> ubuntu-ru  lists.ubuntu.com
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-ru
>
-----------   -----------
Вложение в формате HTML было извлечено&hellip;
URL: https://lists.ubuntu.com/archives/ubuntu-ru/attachments/20100404/ed781359/attachment-0001.htm 


ubuntu-ru