Usplash сломался

[Kirill Shatalaev]

Vladimir Khramtsov пишет:
> Думаю, что нужно перегенерить initram  командой  sudo update-initramfs 
> -u . Вероятно все прописано там.

Это то я сразу сделал по первой ссылке.


> Заодно проверить значения разрешения в файле /etc/usplash.conf

По поводу "совсем не работает" был не прав, опечатался слегка в 
/boot/grub/menu.lst
Проблема та же - с какого-то момента вместо прогрессбара идёт текстовая 
загрузка.
Кстати, выключается при этом нормально, демонстрируя "обратный" прогрессбар.
Конфиги:


sv на svs:~$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
# /dev/md0
UUID=c57c1280-971c-403e-94bb-58e769221f7b	/		ext3 
relatime,errors=remount-ro 0       1
# /dev/svsvg0/home
UUID=c3487346-ff11-43fa-8b96-7f360de5bfab	/home		ext3    relatime 
  0       2
# /dev/svsvg0/usr
UUID=12ca9dad-add5-4d0e-a7e5-1b141b12134e	/usr		ext3    relatime 
0       2
# /dev/svsvg0/var
UUID=e7235ed2-84b8-4df2-9bd3-e3ebb022321e	/var            ext3 
relatime        0       2
# /dev/sdb2
UUID=093aa367-396a-4e6e-827e-45ef61ab1153	none		swap	sw		0       0
# /dev/sda2
UUID=6ba9f645-c6fb-4a6e-8a14-511ad279a571	none		swap	sw		0       0
# /tmp
tmpfs						/tmp		tmpfs 	size=2g,mode=1777	0	0
#dvd-rom
/dev/scd0       /media/cdrom0   udf,iso9660 user,noauto,exec,utf8 0       0
#usbfs (for virtualbox)
none /proc/bus/usb usbfs devgid=127,devmode=664 0 0



sv на svs:~$ cat /etc/usplash.conf
# Usplash configuration file
# These parameters will only apply after running update-initramfs.

xres=1680
yres=1050




sv на svs:~$ cat /boot/grub/menu.lst
# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 
0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default 
entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default		0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the 
default entry
# (normally the first entry defined).
timeout		10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive 
editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title		Windows 95/98/NT/2000
# root		(hd0,0)
# makeactive
# chainloader	+1
#
# title		Linux
# root		(hd0,1)
# kernel	/vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=ac053c59-e137-4e7c-8645-3d485ef88910 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice 
versa
## e.g. indomU=detect
##      indomU=true
##      indomU=false
# indomU=detect

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##


title           Ubuntu 9.04, kernel 2.6.28-15-generic
root            (hd0,0)
kernel          /boot/vmlinuz-2.6.28-15-generic 
root=UUID=c57c1280-971c-403e-94bb-58e769221f7b ro quiet splash
initrd          /boot/initrd.img-2.6.28-15-generic
quiet


title		Ubuntu 9.04, kernel 2.6.28-15-generic (recovery mode)
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.28-15-generic 
root=UUID=c57c1280-971c-403e-94bb-58e769221f7b ro single
initrd		/boot/initrd.img-2.6.28-15-generic

### END DEBIAN AUTOMAGIC KERNELS LIST