проблемы с hdd
Sergey Alekseev
veo на nixteam.spb.ru
Вс Окт 4 12:44:15 BST 2009
On Sun, 4 Oct 2009 14:36:18 +0300, Victor A Adrianovskiy
<vadrianovskiy на gmail.com> wrote:
> Странно, что нестарый диск не умеет SMART. А smartctl -a /dev/sdb
такой-же
> вывод дает? Диски ведь одинаковые?
>> root на veo-server:~# smartctl -a /dev/sdc
>> smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8
>> Bruce Allen
>> Home page is http://smartmontools.sourceforge.net/
>>
>> Short INQUIRY response, skip product id
>> A mandatory SMART command failed: exiting. To continue, add one or more
>> '-T permissive' options.
>>
>> root на veo-server:~# smartctl -a -T permissive /dev/sdc
>> smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8
>> Bruce Allen
>> Home page is http://smartmontools.sourceforge.net/
>>
>> Short INQUIRY response, skip product id
>> SMART Health Status: OK
>> Read defect list: asked for grown list but didn't get it
>>
>> Error Counter logging not supported
>> Device does not support Self Test logging
>> --
>> С уважением, Сергей.
>>
>> mailto:veo на nixteam.spb.ru
>>
>> --
>> ubuntu-ru mailing list
>> ubuntu-ru на lists.ubuntu.com
>> https://lists.ubuntu.com/mailman/listinfo/ubuntu-ru
>>
Винты полностью одинаковые... вот что выводит sdb
root на veo-server:/home/veosrv/d# smartctl -a /dev/sdc
smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8
Bruce Allen
Home page is http://smartmontools.sourceforge.net/
Short INQUIRY response, skip product id
A mandatory SMART command failed: exiting. To continue, add one or more
'-T permissive' options.
root на veo-server:/home/veosrv/d# smartctl -a /dev/sdb
smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8
Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: WDC WD3202ABYS-01B7A0
Serial Number: WD-WCAT13927079
Firmware Version: 02.03B02
User Capacity: 320,072,933,376 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sun Oct 4 15:43:11 2009 MSD
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (6360) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 77) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always
- 0
3 Spin_Up_Time 0x0027 158 157 021 Pre-fail Always
- 3100
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always
- 24
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always
- 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always
- 0
9 Power_On_Hours 0x0032 097 097 000 Old_age Always
- 2426
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always
- 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always
- 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 24
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always
- 20
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always
- 24
194 Temperature_Celsius 0x0022 111 106 000 Old_age Always
- 32
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always
- 74
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline
- 0
SMART Error Log Version: 1
Warning: ATA error count 3 inconsistent with error log pointer 1
ATA Error Count: 3
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 3 occurred at disk power-on lifetime: 2373 hours (98 days + 21
hours)
When the command that caused the error occurred, the device was active
or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 27 bf 10 1c ee Error: UNC 39 sectors at LBA = 0x0e1c10bf =
236720319
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 d8 0f 10 1c 0e 08 00:03:27.187 READ DMA
c8 00 00 0f 0f 1c 0e 08 00:03:27.186 READ DMA
c8 00 00 0f 0e 1c 0e 08 00:03:27.185 READ DMA
c8 00 00 0f 0d 1c 0e 08 00:03:27.184 READ DMA
Error 2 occurred at disk power-on lifetime: 2371 hours (98 days + 19
hours)
When the command that caused the error occurred, the device was active
or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 4f 9f 9c f1 e0 Error: UNC 79 sectors at LBA = 0x00f19c9f =
15834271
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 d0 1f 9c f1 00 08 00:45:54.973 READ DMA
c8 00 00 1f 9b f1 00 08 00:45:54.971 READ DMA
c8 00 00 1f 9a f1 00 08 00:45:54.970 READ DMA
c8 00 00 1f 99 f1 00 08 00:45:54.968 READ DMA
c8 00 00 1f 98 f1 00 08 00:45:54.967 READ DMA
Error 1 occurred at disk power-on lifetime: 2371 hours (98 days + 19
hours)
When the command that caused the error occurred, the device was active
or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 5f bf 32 ac e0 Error: UNC 95 sectors at LBA = 0x00ac32bf =
11285183
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 1f 32 ac 00 08 00:34:24.214 READ DMA
c8 00 00 1f 31 ac 00 08 00:34:24.213 READ DMA
c8 00 00 1f 30 ac 00 08 00:34:24.212 READ DMA
c8 00 00 1f 2f ac 00 08 00:34:24.210 READ DMA
c8 00 00 1f 2e ac 00 08 00:34:24.209 READ DMA
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute
delay.
--
С уважением, Сергей.
mailto:veo на nixteam.spb.ru
Подробная информация о списке рассылки ubuntu-ru