Ubuntu+ NVidia+Monitor refresh rate

Alex Berber berber.it gmail.com
7 15:30:46 BST 2009


Alex Berber пишет:
 По поводу монитора. Врет или не врет узнать просто.

 $ sudo apt-get install read-edid
 $ sudo get-edid|parse-edid

 Вывод в студию.

 $ sudo aptitude install xresprobe
 $ sudo ddcprobe

 Вывод в студию.

 Вот так настраивать пробывали? ->

 $ sudo dpkg-reconfigure -plow xserver-xorg

И еще, при правлении xorg.conf создается впечатление, что он вообще не 
нужен,
так как вноси не вноси новые диррективы, толку мало. (жирным шрифтом)

Вот что исправил я.

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
*    Option "DynamicTwinView" "False" # fix refresh rate*
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
*    Modes "1440x900" "1360x768"*
    EndSubSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
*    Modeline "1440x900_75.00"  136.49  1440 1536 1688 1936  900 901 904 
940  -HSync +Vsync*
EndSection

#sudo /etc/init.d/gdm restart

booch  alexlinux:~$ xrandr
Screen 0: minimum 320 x 240, current 1440 x 900, maximum 1440 x 900
default connected 1440x900+0+0 0mm x 0mm
*   1440x900       60.0* *
   1360x768       60.0 
   1152x864       60.0 
   1024x768       60.0 
   960x600        60.0 
   960x540        60.0 
   840x525        60.0 

Однако в чем прикол, я не могу проверить EDID-информацию от монитора.

booch  alexlinux:~$ sudo ddcprobe
vbe: VESA 3.0 detected.
oem: NVIDIA
vendor: NVIDIA Corporation
product: G84 Board - p410h1b Chip Rev
memory: 14336kb
mode: 640x400x256
mode: 640x480x256
mode: 800x600x16
mode: 800x600x256
mode: 1024x768x16
mode: 1024x768x256
mode: 320x200x64k
mode: 320x200x16m
mode: 640x480x64k
mode: 640x480x16m
mode: 800x600x64k
mode: 800x600x16m
mode: 1024x768x64k
mode: 1024x768x16m
*edid: *
*edidfail*

booch  alexlinux:~$  sudo get-edid|parse-edid
.....
VBE/DDC service about to be called
    Read EDID

    Performing real mode VBE call
    Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
    Function supported
    Call failed

The EDID data should not be trusted as the VBE call failed
*Error: output block unchanged*
*parse-edid: IO error reading EDID*

У вас должно показывать.
Пока идеи кончились :-(
-----------   -----------
Вложение в формате HTML было извлечено…
URL: https://lists.ubuntu.com/archives/ubuntu-ru/attachments/20090507/3d2543d9/attachment.htm 


ubuntu-ru