Re: ath5 wifi перестал работать после обновления

[Vladimir Q]

Спасибо за инструкции по установке madwifi.
Пока с новым ядром ath5k прекрасно работает. Если будут проблемы, буду
пользоваться Вашими инструкциями. На данный момент мне кажется,
установка ядра из deb пакета это сильно проще нежели сборка драйверов
с патчами.
Кстати, нормально ли работают средства aircrack-ng с madfiwi? (с ath5k
вроде всё работает).

2 июля 2009 г. 4:00 пользователь Pronin Vladimir (babahvl на mail.ru) написал:
> Здравствуйте, Vladimir Q
>
> Данная проблема исчезла после того как я поставил ядро
> 2.6.30-020630 c http://kernel.ubuntu.com/~kernel-ppa/mainline/v2.6.30/
>
>
> HOWTO: Fujitsu Siemens Li1718 with Madwifi
>
>
> sudo apt-get update
>
> sudo apt-get upgrade
>
> sudo apt-get install linux-headers-`uname -r`
>
> wget http://www.cakey.de/acerhk/archives/acerhk-0.5.35.tgz
>
> wget http://snapshots.madwifi.org/special/madwifi-ng-r2756+ar5007.tar.gz
>
> tar xfvz madwifi-ng-r2756+ar5007.tar.gz
>
> cd madwifi-ng-r2756+ar5007
>
> make
>
> sudo make install
>
> cd ..
>
> tar xfvz acerhk-0.5.35.tgz
>
> cd acerhk-0.5.35
>
> patch -p0 < acerhk.Makefile.patch
>
> make
>
> sudo make install
>
> sudo gedit /etc/modprobe.d/amilo_special_keys.modprobe
>
> and paste the following into the file, save and exit
>
> Code:
>
> # set up kernel module acerhk to enable Fujitsu Siemens Amilo Li1718 special
> keys
>
> # and enable wireless when the module is inserted.
>
> # NOTE: to have the wireless hardware disabled until you press the wireless
> key on the laptop,
>
> # simply replace "echo 1" with "echo 0" in the command below.
>
> install acerhk /sbin/modprobe --ignore-install acerhk force_series=6805
> autowlan=1; echo 1 > /proc/driver/acerhk/wirelessled
>
> 6. Remove the acerhk module which is shipped with Ubuntu:
>
> Code:
>
> sudo rm /lib/modules/2.6.22-14-generic/ubuntu/misc/acerhk.ko
>
> 7. Rebuild the module dependencies database
>
> Code:
>
> sudo depmod -a
>
> 8. Tell the system to load the acerhk module at boot time - it won't
> otherwise, as it's not actually an Acer laptop!
>
> Code:
>
> sudo gedit /etc/modules
>
> add on a new line at the end of this file, then save and exit:
>
> Code:
>
> acerhk
>
> 9. restart your machine and you should have a working wifi card.
>
> Re: HOWTO: Fujitsu Siemens Li1718 with Madwifi
>
> Many thanks for the guide.
>
> These changes are required for Ubuntu 8.04:
>
> Step 4. Build the new acerhk module, needed to enable the wireless button on
> the machine:on
> On Hardy Heron the acerhk-0.5.35 requires a minor change in the Makefile,
> otherwise the compilation fails. Open the Makefile and change the first
> ocurrence of word "CFLAGS" to "EXTRA_CFLAGS" around the line number 17, like
> this.
> Change
>
> Code:
>
> CFLAGS+=-c -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer
> -fno-strict-aliasing -fno-common -pipe
>
> to
>
> Code:
>
> EXTRA_CFLAGS+=-c -Wall -Wstrict-prototypes -Wno-trigraphs -O2
> -fomit-frame-pointer -fno-strict-aliasing -fno-common -pipe
>
> I created a patch for it. You can simply do
> $ cd acerhk-0.5.35
>
> # Get and apply the patch
> $ wget http://www.edbl.no/tmp/acerhk.Makefile.patch
> $ patch -p0 < acerhk.Makefile.patch
>
> $ make
> $ sudo make install
> -------------
>
> Step 6. Remove the acerhk module which is shipped with Ubuntu. The kernel
> name has changed since Ubuntu 7.10. Now you should run this command
> $ sudo rm /lib/modules/$(uname -r)/ubuntu/misc/acerhk.ko
>
>
> --
> -----------------------------
> С уважением, Пронин Владимир
> тел.: 8 4232 48-22-77 (+7-950-299-22-77)
> ICQ:  325-356-842
>
> --
> ubuntu-ru mailing list
> ubuntu-ru на lists.ubuntu.com
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-ru
>
>