Re: помогите разобраться что у меня со показаниями smart-a
Voffka q
qvoffka на gmail.com
Ср Фев 6 13:05:07 GMT 2008
п²п╟я│п╨п╬п╩я▄п╨п╬ я▐ п©п╬п╫п╦п╪п╟я▌, п©п╬я│я▀п©п╟п╩я│я▐ я┘п╟я─п╢-
196 Reallocated_Event_Count 0x0032 159 159 000 Old_age
Always - 41
я█я┌п╟ п╫п╟п╢п©п╦я│я▄ пЁп╬п╡п╬я─п╦я┌ п╬ я┌п╬п╪, я┤я┌п╬ 41 я─п╟п╥ п©я─п╬п╦я│я┘п╬п╢п╦п╩п╟ п╥п╟п╪п╣п╫п╟ п╠п╦я┌я▀я┘ я│п╣п╨я┌п╬я─п╬п╡.
п∙я│п╩п╦ я█я┌п╬ я┤п╦я│п╩п╬ п╠я┐п╢п╣я┌ я─п╟я│я┌п╦ - п╪п╣п╫я▐п╧я┌п╣ я┘п╟я─п╢.
2008/2/6, sergicus s <sergicus на gmail.com>:
>
> п²п╣п╢п╟п╡п╫п╬ п©п╬я│я┌п╟п╦п╩ п╫п╟ я│п╣я─п╡п╣я─ ubuntu 7.1- server
> п©п╬я┌п╦я┘п╬п╫я▄п╨я┐ я│ п╫п╣п╧ я─п╟п╠п╬я┌п╟п╩
> п╫п╟я┤п╟п╩ п©я─п╬п╡п╣я─я▐я┌я▄ smart
>
> sudo smartctl -a /dev/hda
>
> smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
> Home page is http://smartmontools.sourceforge.net/
>
> === START OF INFORMATION SECTION ===
> Model Family: Western Digital Caviar family
> Device Model: WDC WD600BB-00CAA1
> Serial Number: WD-WMA8E7857660
> Firmware Version: 17.07W17
> User Capacity: 60Б─┌022Б─┌480Б─┌896 bytes
> Device is: In smartctl database [for details use: -P show]
> ATA Version is: 5
> ATA Standard is: Exact ATA specification draft version not indicated
> Local Time is: Wed Feb 6 09:59:53 2008 MSK
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
>
> === START OF READ SMART DATA SECTION ===
> SMART overall-health self-assessment test result: PASSED
> See vendor-specific Attribute list for marginal Attributes.
>
> General SMART Values:
> Offline data collection status: (0x84) Offline data collection activity
> was suspended by an interrupting
> command from host.
> Auto Offline Data Collection:
> Enabled.
> Self-test execution status: ( 0) The previous self-test routine
> completed
> without error or no self-test has
> ever
> been run.
> Total time to complete Offline
> data collection: (2340) seconds.
> Offline data collection
> capabilities: (0x3b) SMART execute Offline immediate.
> Auto Offline data collection
> on/off support.
> Suspend Offline collection upon
> new
> command.
> Offline surface scan supported.
> Self-test supported.
> Conveyance Self-test supported.
> No Selective Self-test supported.
> SMART capabilities: (0x0003) Saves SMART data before entering
> power-saving mode.
> Supports SMART auto save timer.
> Error logging capability: (0x01) Error logging supported.
> No General Purpose Logging
> support.
> Short self-test routine
> recommended polling time: ( 2) minutes.
> Extended self-test routine
> recommended polling time: ( 43) minutes.
> Conveyance self-test routine
> recommended polling time: ( 5) minutes.
>
> SMART Attributes Data Structure revision number: 16
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
> WHEN_FAILED RAW_VALUE
> 1 Raw_Read_Error_Rate 0x000b 200 001 051 Pre-fail Always
> In_the_past 0
> 3 Spin_Up_Time 0x0007 100 094 021 Pre-fail
> Always - 4058
> 4 Start_Stop_Count 0x0032 100 100 040 Old_age
> Always - 372
> 5 Reallocated_Sector_Ct 0x0033 180 180 140 Pre-fail
> Always - 316
> 7 Seek_Error_Rate 0x000b 100 253 051 Pre-fail
> Always - 0
> 9 Power_On_Hours 0x0032 050 050 000 Old_age
> Always - 36921
> 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail
> Always - 0
> 11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail
> Always - 0
> 12 Power_Cycle_Count 0x0032 100 100 000 Old_age
> Always - 220
> 196 Reallocated_Event_Count 0x0032 159 159 000 Old_age
> Always - 41
> 197 Current_Pending_Sector 0x0012 189 186 000 Old_age
> Always - 108
> 198 Offline_Uncorrectable 0x0012 189 188 000 Old_age
> Always - 108
> 199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age
> Always - 65
> 200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail
> Offline - 0
>
> SMART Error Log Version: 1
> ATA Error Count: 5945 (device log contains only the most recent five
> errors)
> CR = Command Register [HEX]
> FR = Features Register [HEX]
> SC = Sector Count Register [HEX]
> SN = Sector Number Register [HEX]
> CL = Cylinder Low Register [HEX]
> CH = Cylinder High Register [HEX]
> DH = Device/Head Register [HEX]
> DC = Device Command Register [HEX]
> ER = Error register [HEX]
> ST = Status register [HEX]
> Powered_Up_Time is measured from power on, and printed as
> DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
> SS=sec, and sss=millisec. It "wraps" after 49.710 days.
>
> Error 5945 occurred at disk power-on lifetime: 1020 hours (42 days + 12
> hours)
> When the command that caused the error occurred, the device was doing
> SMART Offline or Self-test.
>
> After command completion occurred, registers were:
> ER ST SC SN CL CH DH
> -- -- -- -- -- -- --
> 40 51 10 63 0c 39 e2 Error: UNC at LBA = 0x02390c63 = 37293155
>
> Commands leading to the command that caused the error were:
> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
> -- -- -- -- -- -- -- -- ---------------- --------------------
> 40 00 10 5f 0c 39 e2 00 11:01:39.800 READ VERIFY SECTOR(S)
> 40 00 10 4f 0c 39 e2 00 11:01:39.800 READ VERIFY SECTOR(S)
> 40 00 20 2f 12 39 e2 00 11:01:39.750 READ VERIFY SECTOR(S)
> 40 00 20 0f 12 39 e2 00 11:01:36.900 READ VERIFY SECTOR(S)
> 40 00 20 2f 0f 39 e2 00 11:01:34.200 READ VERIFY SECTOR(S)
>
> Error 5944 occurred at disk power-on lifetime: 1020 hours (42 days + 12
> hours)
> When the command that caused the error occurred, the device was doing
> SMART Offline or Self-test.
>
> After command completion occurred, registers were:
> ER ST SC SN CL CH DH
> -- -- -- -- -- -- --
> 40 51 20 15 12 39 e2 Error: UNC at LBA = 0x02391215 = 37294613
>
> Commands leading to the command that caused the error were:
> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
> -- -- -- -- -- -- -- -- ---------------- --------------------
> 40 00 20 0f 12 39 e2 00 11:01:36.900 READ VERIFY SECTOR(S)
> 40 00 20 2f 0f 39 e2 00 11:01:34.200 READ VERIFY SECTOR(S)
> 40 00 20 0f 0f 39 e2 00 11:01:34.200 READ VERIFY SECTOR(S)
> 40 00 20 6f 0c 39 e2 00 11:01:34.200 READ VERIFY SECTOR(S)
> 40 00 20 4f 0c 39 e2 00 11:01:31.500 READ VERIFY SECTOR(S)
>
> Error 5943 occurred at disk power-on lifetime: 1020 hours (42 days + 12
> hours)
> When the command that caused the error occurred, the device was doing
> SMART Offline or Self-test.
>
> After command completion occurred, registers were:
> ER ST SC SN CL CH DH
> -- -- -- -- -- -- --
> 40 51 20 3c 0f 39 e2 Error: UNC at LBA = 0x02390f3c = 37293884
>
> Commands leading to the command that caused the error were:
> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
> -- -- -- -- -- -- -- -- ---------------- --------------------
> 40 00 20 2f 0f 39 e2 00 11:01:34.200 READ VERIFY SECTOR(S)
> 40 00 20 0f 0f 39 e2 00 11:01:34.200 READ VERIFY SECTOR(S)
> 40 00 20 6f 0c 39 e2 00 11:01:34.200 READ VERIFY SECTOR(S)
> 40 00 20 4f 0c 39 e2 00 11:01:31.500 READ VERIFY SECTOR(S)
> 40 00 40 4f 12 39 e2 00 11:01:31.500 READ VERIFY SECTOR(S)
>
> Error 5942 occurred at disk power-on lifetime: 1020 hours (42 days + 12
> hours)
> When the command that caused the error occurred, the device was doing
> SMART Offline or Self-test.
>
> After command completion occurred, registers were:
> ER ST SC SN CL CH DH
> -- -- -- -- -- -- --
> 40 51 20 63 0c 39 e2 Error: UNC at LBA = 0x02390c63 = 37293155
>
> Commands leading to the command that caused the error were:
> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
> -- -- -- -- -- -- -- -- ---------------- --------------------
> 40 00 20 4f 0c 39 e2 00 11:01:31.500 READ VERIFY SECTOR(S)
> 40 00 40 4f 12 39 e2 00 11:01:31.500 READ VERIFY SECTOR(S)
> 40 00 40 0f 12 39 e2 00 11:01:28.950 READ VERIFY SECTOR(S)
> 40 00 40 4f 0f 39 e2 00 11:01:28.950 READ VERIFY SECTOR(S)
> 40 00 40 0f 0f 39 e2 00 11:01:26.300 READ VERIFY SECTOR(S)
>
> Error 5941 occurred at disk power-on lifetime: 1020 hours (42 days + 12
> hours)
> When the command that caused the error occurred, the device was doing
> SMART Offline or Self-test.
>
> After command completion occurred, registers were:
> ER ST SC SN CL CH DH
> -- -- -- -- -- -- --
> 40 51 40 15 12 39 e2 Error: UNC at LBA = 0x02391215 = 37294613
>
> Commands leading to the command that caused the error were:
> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
> -- -- -- -- -- -- -- -- ---------------- --------------------
> 40 00 40 0f 12 39 e2 00 11:01:28.950 READ VERIFY SECTOR(S)
> 40 00 40 4f 0f 39 e2 00 11:01:28.950 READ VERIFY SECTOR(S)
> 40 00 40 0f 0f 39 e2 00 11:01:26.300 READ VERIFY SECTOR(S)
> 40 00 40 4f 0c 39 e2 00 11:01:23.650 READ VERIFY SECTOR(S)
> 40 00 40 0f 0c 39 e2 00 11:01:23.650 READ VERIFY SECTOR(S)
>
> SMART Self-test log structure revision number 1
> No self-tests have been logged. [To run self-tests, use: smartctl -t]
>
>
> Device does not support Selective Self Tests/Logging
>
>
>
> п▓я▀п╡п╣п╩п╦я│я▄ п╬я┬п╦п╠п╨п╦ - п©п╬я│п╬п╡п╣я┌я┐п╧я┌п╣ я┤я┌п╬ п╬п╫п╦ п╥п╫п╟я┤п╟я┌
>
>
> --
> п║ я┐п╡п╟п╤п╣п╫п╦п╣п╪
> п║п╣я─пЁп╣п╧
> --
> ubuntu-ru mailing list
> ubuntu-ru на lists.ubuntu.com
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-ru
>
>
----------- следущая часть -----------
п▓п╩п╬п╤п╣п╫п╦п╣ п╡ я└п╬я─п╪п╟я┌п╣ HTML п╠я▀п╩п╬ п╦п╥п╡п╩п╣я┤п╣п╫п╬…
URL: https://lists.ubuntu.com/archives/ubuntu-ru/attachments/20080206/2929581f/attachment-0001.htm
Подробная информация о списке рассылки ubuntu-ru