помогите разобраться что у меня со показаниями smart-a

sergicus s sergicus на gmail.com
Ср Фев 6 12:06:36 GMT 2008


п²п╣п╢п╟п╡п╫п╬ п©п╬я│я┌п╟п╦п╩ п╫п╟ я│п╣я─п╡п╣я─ ubuntu 7.1- server
п©п╬я┌п╦я┘п╬п╫я▄п╨я┐ я│ п╫п╣п╧ я─п╟п╠п╬я┌п╟п╩
п╫п╟я┤п╟п╩ п©я─п╬п╡п╣я─я▐я┌я▄ smart

sudo smartctl -a /dev/hda

smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar family
Device Model:     WDC WD600BB-00CAA1
Serial Number:    WD-WMA8E7857660
Firmware Version: 17.07W17
User Capacity:    60Б─┌022Б─┌480Б─┌896 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   5
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Wed Feb  6 09:59:53 2008 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity
                                        was suspended by an interrupting
command from host.
                                        Auto Offline Data Collection:
Enabled.
Self-test execution status:      (   0) The previous self-test routine
completed
                                        without error or no self-test has
ever
                                        been run.
Total time to complete Offline
data collection:                 (2340) seconds.
Offline data collection
capabilities:                    (0x3b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off
support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        No Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        No General Purpose Logging support.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  43) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED
WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   200   001   051    Pre-fail  Always
In_the_past 0
  3 Spin_Up_Time            0x0007   100   094   021    Pre-fail
Always       -       4058
  4 Start_Stop_Count        0x0032   100   100   040    Old_age
Always       -       372
  5 Reallocated_Sector_Ct   0x0033   180   180   140    Pre-fail
Always       -       316
  7 Seek_Error_Rate         0x000b   100   253   051    Pre-fail
Always       -       0
  9 Power_On_Hours          0x0032   050   050   000    Old_age
Always       -       36921
 10 Spin_Retry_Count        0x0013   100   100   051    Pre-fail
Always       -       0
 11 Calibration_Retry_Count 0x0013   100   100   051    Pre-fail
Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age
Always       -       220
196 Reallocated_Event_Count 0x0032   159   159   000    Old_age
Always       -       41
197 Current_Pending_Sector  0x0012   189   186   000    Old_age
Always       -       108
198 Offline_Uncorrectable   0x0012   189   188   000    Old_age
Always       -       108
199 UDMA_CRC_Error_Count    0x000a   200   253   000    Old_age
Always       -       65
200 Multi_Zone_Error_Rate   0x0009   200   200   051    Pre-fail
Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 5945 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 5945 occurred at disk power-on lifetime: 1020 hours (42 days + 12
hours)
  When the command that caused the error occurred, the device was doing
SMART Offline or Self-test.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 10 63 0c 39 e2  Error: UNC at LBA = 0x02390c63 = 37293155

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  40 00 10 5f 0c 39 e2 00      11:01:39.800  READ VERIFY SECTOR(S)
  40 00 10 4f 0c 39 e2 00      11:01:39.800  READ VERIFY SECTOR(S)
  40 00 20 2f 12 39 e2 00      11:01:39.750  READ VERIFY SECTOR(S)
  40 00 20 0f 12 39 e2 00      11:01:36.900  READ VERIFY SECTOR(S)
  40 00 20 2f 0f 39 e2 00      11:01:34.200  READ VERIFY SECTOR(S)

Error 5944 occurred at disk power-on lifetime: 1020 hours (42 days + 12
hours)
  When the command that caused the error occurred, the device was doing
SMART Offline or Self-test.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 20 15 12 39 e2  Error: UNC at LBA = 0x02391215 = 37294613

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  40 00 20 0f 12 39 e2 00      11:01:36.900  READ VERIFY SECTOR(S)
  40 00 20 2f 0f 39 e2 00      11:01:34.200  READ VERIFY SECTOR(S)
  40 00 20 0f 0f 39 e2 00      11:01:34.200  READ VERIFY SECTOR(S)
  40 00 20 6f 0c 39 e2 00      11:01:34.200  READ VERIFY SECTOR(S)
  40 00 20 4f 0c 39 e2 00      11:01:31.500  READ VERIFY SECTOR(S)

Error 5943 occurred at disk power-on lifetime: 1020 hours (42 days + 12
hours)
  When the command that caused the error occurred, the device was doing
SMART Offline or Self-test.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 20 3c 0f 39 e2  Error: UNC at LBA = 0x02390f3c = 37293884

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  40 00 20 2f 0f 39 e2 00      11:01:34.200  READ VERIFY SECTOR(S)
  40 00 20 0f 0f 39 e2 00      11:01:34.200  READ VERIFY SECTOR(S)
  40 00 20 6f 0c 39 e2 00      11:01:34.200  READ VERIFY SECTOR(S)
  40 00 20 4f 0c 39 e2 00      11:01:31.500  READ VERIFY SECTOR(S)
  40 00 40 4f 12 39 e2 00      11:01:31.500  READ VERIFY SECTOR(S)

Error 5942 occurred at disk power-on lifetime: 1020 hours (42 days + 12
hours)
  When the command that caused the error occurred, the device was doing
SMART Offline or Self-test.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 20 63 0c 39 e2  Error: UNC at LBA = 0x02390c63 = 37293155

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  40 00 20 4f 0c 39 e2 00      11:01:31.500  READ VERIFY SECTOR(S)
  40 00 40 4f 12 39 e2 00      11:01:31.500  READ VERIFY SECTOR(S)
  40 00 40 0f 12 39 e2 00      11:01:28.950  READ VERIFY SECTOR(S)
  40 00 40 4f 0f 39 e2 00      11:01:28.950  READ VERIFY SECTOR(S)
  40 00 40 0f 0f 39 e2 00      11:01:26.300  READ VERIFY SECTOR(S)

Error 5941 occurred at disk power-on lifetime: 1020 hours (42 days + 12
hours)
  When the command that caused the error occurred, the device was doing
SMART Offline or Self-test.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 40 15 12 39 e2  Error: UNC at LBA = 0x02391215 = 37294613

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  40 00 40 0f 12 39 e2 00      11:01:28.950  READ VERIFY SECTOR(S)
  40 00 40 4f 0f 39 e2 00      11:01:28.950  READ VERIFY SECTOR(S)
  40 00 40 0f 0f 39 e2 00      11:01:26.300  READ VERIFY SECTOR(S)
  40 00 40 4f 0c 39 e2 00      11:01:23.650  READ VERIFY SECTOR(S)
  40 00 40 0f 0c 39 e2 00      11:01:23.650  READ VERIFY SECTOR(S)

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


Device does not support Selective Self Tests/Logging



п▓я▀п╡п╣п╩п╦я│я▄ п╬я┬п╦п╠п╨п╦ - п©п╬я│п╬п╡п╣я┌я┐п╧я┌п╣ я┤я┌п╬ п╬п╫п╦ п╥п╫п╟я┤п╟я┌


-- 
п║ я┐п╡п╟п╤п╣п╫п╦п╣п╪
п║п╣я─пЁп╣п╧
----------- следущая часть -----------
п▓п╩п╬п╤п╣п╫п╦п╣ п╡ я└п╬я─п╪п╟я┌п╣ HTML п╠я▀п╩п╬ п╦п╥п╡п╩п╣я┤п╣п╫п╬…
URL: https://lists.ubuntu.com/archives/ubuntu-ru/attachments/20080206/4a22771b/attachment-0001.htm 


Подробная информация о списке рассылки ubuntu-ru