Kubuntu & Soft Modem. Help!
Igor Gorshkov
igor.gorshkov на mail.ru
Пн Мар 27 20:58:37 BST 2006
Здравствуйте.
Кто-нибудь сталкивался с этим чудом? См. вложение.
Помогите запустить!
Спасибо.
-------------- next part --------------
DO use the following line as the email Subject Line, to alert cogent experts:
scanModem, Ubuntu 5.10 "Breezy Badger" kernel 2.6.12-9-386
Occassionally reponses are blocked by an Internet Provider mail filters.
So do in a day also check the Archived responses at DISCUSS на linmodems.org
Code updated on: 2006_March_14
------------ -------------- System information ------------------------
Ubuntu 5.10 "Breezy Badger"
on System with processor: i686
currently under kernel: 2.6.12-9-386
https://wiki.ubuntu.com/DialupModemHowto has good general guidance.
A /dev/modem symbolic link is not present
USB modem not detected.
Checking for audio card
0000:00:1b.0 0403: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
Reading /proc/asound/pcm
00-00: ALC260 Analog : ALC260 Analog : playback 1 : capture 1
The kernel was assembled with compiler: 3.4.5
with current System compiler GCC=4.0.2
Found make utility.
Checking for kernel-headers needed for compiling.
Kernel-headers supporting compiling are resident:
Modem candidates are at PCI_buses: 0000:00:1b.0
Providing detail for device at 0000:00:1b.0
with vendor-ID:device-ID
----:----
Class 0403: 8086:2668 0403: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
SubSystem 1025:008f Acer Incorporated [ALI]: Unknown device 008f
Flags: bus master, fast devsel, latency 0, IRQ 16
Checking for IRQ 16 sharing with modem.
O-APIC-level uhci_hcd:usb4, HDA Intel, i915 на pci:0000:00:02.0
-----PCI_IDs------- --CompilerVer-
Feature List: Primary Subsystem Distr KernelVer kernel default CPU
./scanModem test 8086:2668 1025:008f debian_version 2.6.12-9-386 3.4.5 4.0.2 i686
The audio card 8086:2668 may carry a soft modem chip.
The audio/modem driver is not competent to write soft modem information to /proc/asound/pcm
This combination of softmodem controller and Subsystem:
Primary 8086:2668
SubSystem 1025:008f
has not been previously reported.
Modem support within the snd-hda-intel driver is included in 2.6.14 and later kernels
The modem subsystem is not cogent to software support
The controller: 8086:2668 Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller
is capable of supporting soft modem chips from AT LEAST manufacturers:
Conexant
The Subsystem PCI id does not itself identify the modem Codec.
Checking for autoloaded ALSA modem drivers
snd_hda_intel 15872 1
snd_hda_codec 72064 1 snd_hda_intel
snd_pcm 78344 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd 48644 8 snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
snd_page_alloc 10120 2 snd_hda_intel,snd_pcm
Driver snd-hda-intel may enable codec acquisition
Checking for modem on HDA audio card
----- /proc/asound/pcm -----
00-00: ALC260 Analog : ALC260 Analog : playback 1 : capture 1
=== Begin mc97 codec query ===
Files under /proc/asound/ do not include modem codec information.
If more decisive information is not given below,
this is a tentative signature of a Conexant hsfmodem. Download a hsfmodem package from
http://www.linuxant.com/drivers or your installation CDs. For SuSE/Novell, install both
km_hsfmodem and hsfmodem packages, for drivers and configuration tools respectively.
=== End mc97 codec query ===
Beginning check for older ac97_codec modems.
An older ac97_modem codec was not detected.
Information on several modem chipset providers is provided below,
because ambiguities remain on the correct choice of supporting software.
== Checking PCI IDs through modem chip suppliers ==
Vendor=1025 is Acer, http://global.acer.com/ PC and latop manufacturer with devices including:
. 1025:5453 M5453 AC-Link Controller Modem Device
. 1025:0038 an AC97 link modem.
== Checking PCI IDs through modem chip suppliers ==
Vendor=8086 is Intel, Inc. producing HaM and 536ep host controller free (HCF) modems, 537 soft modem
http://developer.intel.com/design/modems/ . Also produced are
AC97 and MC97 controllers managing a varierty of non-Intel soft modem Subsystems.
These subSystems often have PCI_IDs assigned by the modem assembler, rather than the chip provider.
Download Intel-537ep drivers through: http://developer.intel.com/design/modems/support/drivers.htm
Also check at: http://linmodems.technion.ac.il/packages/Intel/537/
for beta releases and perhaps Already compiled drivers for some Linux distributions
A very detailed installation report cogent to 537 type modems is at:
http://linmodems.technion.ac.il/archive-fifth/msg00541.html
Setup call id with:
Type 1 : When the phone line is not in use at+vcid=1
Type 2 : When the phone line is already in use on a call at+pcw=0
---------------------
======= PCI_ID checking completed ======
Update=2006_March_14
Analyzing information for PCMCIA device at PCI Bus 06:01.0
0000:06:01.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus Controller
Subsystem: Acer Incorporated [ALI]: Unknown device 008f
Flags: bus master, medium devsel, latency 168, IRQ 18
GREPping for an inserted PCMCIA modem with filter: ommunication
If a PCMCIA modem is currently inserted and the sockets activated by
/etc/init.d/pcmcia start
then the PCMCIA bridge is NOT transparent.
If the modem is known to have a Lucent digital signal processing chipset,
then PCMCIA.tar.gz variant assembled by Joern Wustenfeld is necessary,
rather than the standard ltmodem-8.31b1.tar.gz at http://ltmodem.heby.de/
drwxr-xr-x 2 root root 0 2006-03-25 22:52 /dev/.udevdb
There is an active UDEV file system, creating device nodes in volatile RAM.
For SmartLink modems using the slamr.ko or slusb.ko drivers an /etc/init.d/ script
will be necessary to create /dev/slamr0 or /dev/slusb0 ports, or manually by:
# mknod -m 600 /dev/slamr0 c 242 0
# mknod -m 600 /dev/slusb0 c 243 0
upon each bootup.
For information on modem port creation under the UDEV device file system see:
http://linmodems.technion.ac.il/archive-fourth/msg03299.html for Conexnant modems
http://linmodems.technion.ac.il/archive-fifth/msg01177.html for Lucent/Agere DSP modems
Checking for modem symbolic link support lines within /etc/udev/ files
Checking the /etc/apt/sources.list
deb cdrom:[Kubuntu 5.10 _Breezy Badger_ - Release i386 (20051012)]/ breezy main restricted
A package kernel-kbuild-2.6-3 or later version must be installed to support compiling
/usr/bin/gcc -> /usr/bin/gcc-4.0
The Major.Minor versions differ in the designated compiler 4.0.2 and the 3.4.5 used in kernel assembly!!"
But there must be a match on the target for driver installation,
of gcc Major.Minor versions or kernel and drivers!!
Otherwise the drivers will fail to load with warning:
Invalid module format!!"
See http://linmodems.technion.ac.il/archive-fifth/msg04252.html
A /dev/modem symbolic link is not set.
The following information blocks just query some ppp support items.
====================================================
grep -rs ppp /etc/modprobe.*
-------------------------------------
/etc/modprobe.d/aliases:alias net-pf-24 pppoe
/etc/modprobe.d/aliases:alias ppp-compress-18 ppp_mppe_mppc
-------------------------------------
Resident PPP support modules are properly uncompressed .
COMM services are not active
Be sure to read the section about ppp related modules and aliases in Modem/YourSystem.txt
---- dmesg queries -------
debian_version is not yet providing pre-compiled drivers for WinModems
More information about the ubuntu-ru
mailing list