<div dir="ltr">boas como instalar/colocar a funcionar um convertor usb/serie no Ubuntu? o cabo é o seguinte: andre@andre:~$ lsusb Bus 002 Device 007: ID 062a:0102 Creative Labs Bus 002 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 andre@andre:~$ desligando o cabo a ligar um pouco depois... (foi o que me pediram num forum onde pedi ajuda mas ainda não consegui ajuda) andre@andre:~$ tail -f /var/log/messages Oct  3 10:46:15 andre kernel: [  246.509367] input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:0b.0-2 Oct  3 10:46:15 andre kernel: [  246.521598] input: MOSART Semi. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-2/2-2:1.1/input/input13 Oct  3 10:46:15 andre kernel: [  246.597269] input,hiddev96,hidraw1: USB HID v1.10 Mouse [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:0b.0-2 Oct  3 10:46:25 andre kernel: [  256.706044] usb 2-2: USB disconnect, address 6 Oct  3 10:46:26 andre kernel: [  256.975780] usb 2-2: new low speed USB device using ohci_hcd and address 7 Oct  3 10:46:26 andre kernel: [  257.207492] usb 2-2: configuration #1 chosen from 1 choice Oct  3 10:46:26 andre kernel: [  257.218595] input: MOSART Semi. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-2/2-2:1.0/input/input14 Oct  3 10:46:26 andre kernel: [  257.271569] input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:0b.0-2 Oct  3 10:46:26 andre kernel: [  257.281620] input: MOSART Semi. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-2/2-2:1.1/input/input15 Oct  3 10:46:26 andre kernel: [  257.375351] input,hiddev96,hidraw1: USB HID v1.10 Mouse [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:0b.0-2 Oct  3 10:50:47 andre kernel: [  517.579898] usb 2-1: USB disconnect, address 2 Oct  3 10:50:47 andre kernel: [  517.580286] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 Oct  3 10:50:47 andre kernel: [  517.580303] pl2303 2-1:1.0: device disconnected Oct  3 10:50:53 andre kernel: [  524.252797] usb 2-1: new full speed USB device using ohci_hcd and address 8 Oct  3 10:50:54 andre kernel: [  524.465775] usb 2-1: configuration #1 chosen from 1 choice Oct  3 10:50:54 andre kernel: [  524.470003] pl2303 2-1:1.0: pl2303 converter detected Oct  3 10:50:54 andre kernel: [  524.470129] usb 2-1: pl2303 converter now attached to ttyUSB0 Oct  3 10:51:03 andre kernel: [  534.074828] usb 2-2: USB disconnect, address 7 Oct  3 10:51:04 andre kernel: [  534.356716] usb 2-2: new low speed USB device using ohci_hcd and address 9 Oct  3 10:51:04 andre kernel: [  534.588253] usb 2-2: configuration #1 chosen from 1 choice Oct  3 10:51:04 andre kernel: [  534.598344] input: MOSART Semi. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-2/2-2:1.0/input/input16 Oct  3 10:51:04 andre kernel: [  534.644394] input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:0b.0-2 Oct  3 10:51:04 andre kernel: [  534.653407] input: MOSART Semi. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-2/2-2:1.1/input/input17 Oct  3 10:51:04 andre kernel: [  534.740302] input,hiddev96,hidraw1: USB HID v1.10 Mouse [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:0b.0-2 já vi muita coisa na net mas não consegui entender como colocar a funcionar, até encontrei na página do fabricante a drive para Red Hat 9, mas para ubuntu não. Já tentei usar esse drive mas dá erro obrigado a todos</div>