webcam Creative Instant
Jan Wijna
jan.wijna op wanadoo.nl
Vr Apr 21 15:50:57 UTC 2006
Op vr, 21-04-2006 te 07:22 +0200, schreef Martijn van de Streek:
> On Thu, 20 Apr 2006, Jan Wijna wrote:
>
> > De webcam wordt herkend door linux (compleet met naam en type. Hierbij
> > geeft het systeem ook een nummer (6020) aan, wat ik bij de papieren van
> > de camera niet kan vinden).
>
> Waar zie je dit?
Via menu Systeem > beheer > Apparaatbeheer Daar heb ik hem in het
lijstje opgezocht. Geeft daar echter wel aan, had ik gisteren niet
gezien, dat ie het specifieke ding, en de capaciteiten, niet herkent:
Vendor: Creative Technology
Device:USB vendor Specific Interface
Status: Status
Bus type: USB interface
Device type: unknown
Capabilities: unknown
>
> > Als ik hem (via Netmeeting) aan de gang wil krijgen, (icoontje met camera
> > erop aanklikken) loopt het hele systeem vast. Zelfs de cursor werkt niet
> > meer en de systeembelastingsmeter staat stil.
>
> Netmeeting is geen linux-programma. Welk programma gebruik je precies?
als stuurprogramma voor de webcam gebruik ik V4L
>
> > Via het menu Systeem - Voorkeuren - Verwisselbare stations en media -
> > Camera's- kan ik ook iets voor camera's invullen. Is dat misschien een
> > manier om hem aan de praat te krijgen?
>
> Dat is voor fotocamera's, niet webcams.
> Webcams zijn rare beesten in Linux, voor zover ik weet. Maar stuur eens de
> output van 'dmesg' en 'lsusb' naar de mailinglist. Je kunt bestanden maken
> met de inhoud van die commando's door het volgende op een opdrachtregel in
> te tikken:
>
> dmesg > dmesg.txt
> lsusb > lsusb.txt
>
> (uiteraard eerst de camera inpluggen :))
>
> Martijn
Had inmiddels ook het programmaatje Camorama, (Menu toepassingen >
installeer toepasingen) speciefiek voor webcams geprobeerd, gaf exact
hetzelfde resultaat voorwat betreft vastlopen.
Afijn, missschien werpen de onderstaande bestandjes meer licht op de
zaak?
------------- volgend deel ------------
KB] (IRQs 3 4 6 7 10 11 12) *5
[4294668.550000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
[4294668.550000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[4294668.551000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[4294668.551000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[4294668.551000] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[4294668.552000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[4294668.552000] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
[4294668.553000] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled.
[4294668.553000] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
[4294668.554000] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
[4294668.557000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294668.557000] pnp: PnP ACPI init
[4294668.562000] pnp: PnP ACPI: found 14 devices
[4294668.562000] PnPBIOS: Disabled by ACPI PNP
[4294668.562000] PCI: Using ACPI for IRQ routing
[4294668.562000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294668.585000] pnp: 00:01: ioport range 0x4000-0x407f could not be reserved
[4294668.585000] pnp: 00:01: ioport range 0x40f0-0x40ff could not be reserved
[4294668.585000] pnp: 00:01: ioport range 0x5000-0x500f has been reserved
[4294668.586000] audit: initializing netlink socket (disabled)
[4294668.586000] audit: initialized
[4294668.586000] VFS: Disk quotas dquot_6.5.1
[4294668.586000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294668.586000] devfs: 2004-01-31 Richard Gooch (rgooch op atnf.csiro.au)
[4294668.586000] devfs: boot_options: 0x0
[4294668.586000] Initializing Cryptographic API
[4294668.586000] isapnp: Scanning for PnP cards...
[4294668.940000] isapnp: No Plug & Play device found
[4294668.957000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[4294668.958000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294668.958000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294668.958000] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
[4294668.958000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294668.958000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294668.960000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294668.960000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294668.960000] io scheduler noop registered
[4294668.960000] io scheduler anticipatory registered
[4294668.960000] io scheduler deadline registered
[4294668.960000] io scheduler cfq registered
[4294668.960000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294668.961000] EISA: Probing bus 0 at eisa.0
[4294668.961000] Cannot allocate resource for EISA slot 4
[4294668.961000] Cannot allocate resource for EISA slot 5
[4294668.961000] EISA: Detected 0 cards.
[4294668.961000] NET: Registered protocol family 2
[4294668.970000] IP: routing cache hash table of 4096 buckets, 32Kbytes
[4294668.970000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[4294668.970000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[4294668.970000] TCP: Hash tables configured (established 16384 bind 16384)
[4294668.970000] NET: Registered protocol family 8
[4294668.970000] NET: Registered protocol family 20
[4294668.970000] ACPI wakeup devices:
[4294668.970000] PCI0 USB0 USB1 USB2 USB6 USB7 USB8 USB9 LAN0 UAR1 LPT1
[4294668.970000] ACPI: (supports S0 S1 S4 S5)
[4294668.971000] Freeing unused kernel memory: 224k freed
[4294668.982000] input: AT Translated Set 2 keyboard on isa0060/serio0
[4294668.986000] vga16fb: initializing
[4294668.986000] vga16fb: mapped to 0xc00a0000
[4294669.124000] Console: switching to colour frame buffer device 80x30
[4294669.124000] fb0: VGA16 VGA frame buffer device
[4294670.230000] Capability LSM initialized
[4294670.242000] NET: Registered protocol family 1
[4294670.254000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294670.254000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294670.254000] ACPI: bus type ide registered
[4294670.261000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[4294670.261000] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[4294670.261000] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[4294670.261000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 20
[4294670.261000] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 4
[4294670.261000] VP_IDE: chipset revision 6
[4294670.261000] VP_IDE: not 100% native mode: will probe irqs later
[4294670.261000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[4294670.261000] ide0: BM-DMA at 0xa800-0xa807, BIOS settings: hda:pio, hdb:pio
[4294670.261000] ide1: BM-DMA at 0xa808-0xa80f, BIOS settings: hdc:pio, hdd:pio
[4294670.261000] Probing IDE interface ide0...
[4294670.645000] hda: WDC WD400BB-00JHC0, ATA DISK drive
[4294670.900000] hdb: Maxtor 6L160P0, ATA DISK drive
[4294670.954000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294670.954000] Probing IDE interface ide1...
[4294671.746000] hdc: TSSTcorpCD/DVDW TS-H552U, ATAPI CD/DVD-ROM drive
[4294672.358000] ide1 at 0x170-0x177,0x376 on irq 15
[4294672.358000] Probing IDE interface ide2...
[4294672.871000] Probing IDE interface ide3...
[4294673.384000] Probing IDE interface ide4...
[4294673.896000] Probing IDE interface ide5...
[4294674.411000] hda: max request size: 128KiB
[4294674.416000] hda: Host Protected Area detected.
[4294674.416000] current capacity is 78159151 sectors (40017 MB)
[4294674.416000] native capacity is 78165360 sectors (40020 MB)
[4294674.416000] hda: Host Protected Area disabled.
[4294674.416000] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
[4294674.416000] hda: cache flushes supported
[4294674.416000] /dev/ide/host0/bus0/target0/lun0: p1
[4294674.423000] hdb: max request size: 1024KiB
[4294674.456000] hdb: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(133)
[4294674.458000] hdb: cache flushes supported
[4294674.458000] /dev/ide/host0/bus0/target1/lun0: p1 p2 < p5 >
[4294674.500000] hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[4294674.500000] Uniform CD-ROM driver Revision: 3.20
[4294674.771000] Attempting manual resume
[4294674.777000] swsusp: Suspend partition has wrong signature?
[4294674.805000] SCSI subsystem initialized
[4294674.806000] libata version 1.11 loaded.
[4294674.807000] sata_via version 1.1
[4294674.807000] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 20
[4294674.807000] PCI: Via IRQ fixup for 0000:00:0f.0, from 11 to 4
[4294674.807000] sata_via(0000:00:0f.0): routed to hard irq line 4
[4294674.807000] ata1: SATA max UDMA/133 cmd 0x9000 ctl 0x9402 bmdma 0xA000 irq 20
[4294674.807000] ata2: SATA max UDMA/133 cmd 0x9800 ctl 0x9C02 bmdma 0xA008 irq 20
[4294675.008000] ata1: no device found (phy stat 00000000)
[4294675.008000] scsi0 : sata_via
[4294675.209000] ata2: no device found (phy stat 00000000)
[4294675.209000] scsi1 : sata_via
[4294675.228000] usbcore: registered new driver usbfs
[4294675.228000] usbcore: registered new driver hub
[4294675.229000] USB Universal Host Controller Interface driver v2.2
[4294675.229000] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
[4294675.229000] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[4294675.230000] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
[4294675.230000] PCI: Via IRQ fixup for 0000:00:10.0, from 10 to 5
[4294675.230000] uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
[4294675.292000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[4294675.292000] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000ac00
[4294675.292000] hub 1-0:1.0: USB hub found
[4294675.292000] hub 1-0:1.0: 2 ports detected
[4294675.295000] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
[4294675.295000] PCI: Via IRQ fixup for 0000:00:10.1, from 10 to 5
[4294675.295000] uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
[4294675.357000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[4294675.357000] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000b000
[4294675.357000] hub 2-0:1.0: USB hub found
[4294675.357000] hub 2-0:1.0: 2 ports detected
[4294675.360000] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
[4294675.360000] uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
[4294675.422000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[4294675.422000] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b400
[4294675.422000] hub 3-0:1.0: USB hub found
[4294675.422000] hub 3-0:1.0: 2 ports detected
[4294675.425000] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
[4294675.425000] uhci_hcd 0000:00:10.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4)
[4294675.487000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[4294675.487000] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000b800
[4294675.487000] hub 4-0:1.0: USB hub found
[4294675.487000] hub 4-0:1.0: 2 ports detected
[4294675.524000] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
[4294675.524000] PCI: Via IRQ fixup for 0000:00:10.4, from 11 to 5
[4294675.524000] ehci_hcd 0000:00:10.4: VIA Technologies, Inc. USB 2.0
[4294675.524000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[4294675.524000] ehci_hcd 0000:00:10.4: irq 21, io mem 0xde000000
[4294675.524000] ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
[4294675.524000] hub 5-0:1.0: USB hub found
[4294675.524000] hub 5-0:1.0: 8 ports detected
[4294675.571000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[4294675.572000] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
[4294675.572000] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[4294675.572000] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 23
[4294675.572000] PCI: Via IRQ fixup for 0000:00:12.0, from 10 to 7
[4294675.572000] eth0: VIA Rhine II at 0x1c000, 00:14:85:03:83:a1, IRQ 23.
[4294675.573000] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[4294676.314000] usb 5-5: new high speed USB device using ehci_hcd and address 2
[4294677.633000] Initializing USB Mass Storage driver...
[4294677.633000] scsi2 : SCSI emulation for USB Mass Storage devices
[4294677.633000] usb-storage: device found at 2
[4294677.633000] usb-storage: waiting for device to settle before scanning
[4294677.633000] usbcore: registered new driver usb-storage
[4294677.633000] USB Mass Storage support registered.
[4294677.995000] ACPI: CPU0 (power states: C1[C1])
[4294678.157000] Attempting manual resume
[4294678.157000] swsusp: Suspend partition has wrong signature?
[4294678.190000] kjournald starting. Commit interval 5 seconds
[4294678.190000] EXT3-fs: mounted filesystem with ordered data mode.
[4294679.529000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294682.634000] Vendor: SanDisk Model: Cruzer Micro Rev: 2033
[4294682.634000] Type: Direct-Access ANSI SCSI revision: 00
[4294682.752000] usb-storage: device scan complete
[4294683.300000] Adding 1413680k swap on /dev/hdb5. Priority:-1 extents:1
[4294683.601000] EXT3 FS on hdb1, internal journal
[4294686.800000] SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
[4294686.801000] sda: Write Protect is off
[4294686.801000] sda: Mode Sense: 02 00 00 00
[4294686.801000] sda: assuming drive cache: write through
[4294686.806000] SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
[4294686.807000] sda: Write Protect is off
[4294686.807000] sda: Mode Sense: 02 00 00 00
[4294686.807000] sda: assuming drive cache: write through
[4294686.807000] /dev/scsi/host2/bus0/target0/lun0: p1
[4294686.811000] Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0
[4294689.669000] parport: PnPBIOS parport detected.
[4294689.669000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[4294689.757000] lp0: using parport0 (interrupt-driven).
[4294689.800000] mice: PS/2 mouse device common for all mice
[4294690.047000] logips2pp: Detected unknown logitech mouse model 99
[4294690.093000] input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
[4294690.460000] ts: Compaq touchscreen protocol output
[4294692.965000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel op redhat.com
[4294693.638000] cdrom: open failed.
[4294696.493000] Linux agpgart interface v0.101 (c) Dave Jones
[4294696.504000] agpgart: Detected VIA KM400/KM400A chipset
[4294696.531000] agpgart: AGP aperture is 128M @ 0xd0000000
[4294696.627000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294696.641000] shpchp: shpc_init : shpc_cap_offset == 0
[4294696.641000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294697.423000] via82xx: Assuming DXS channels with 48k fixed sample rate.
[4294697.423000] Please try dxs_support=5 option
[4294697.423000] and report if it works on your machine.
[4294697.423000] For more details, read ALSA-Configuration.txt.
[4294697.424000] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[4294697.424000] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[4294697.424000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22
[4294697.424000] PCI: Via IRQ fixup for 0000:00:11.5, from 11 to 6
[4294697.424000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[4294700.616000] Real Time Clock Driver v1.12
[4294700.728000] input: PC Speaker
[4294700.817000] Floppy drive(s): fd0 is 1.44M
[4294700.849000] FDC 0 is a post-1991 82077
[4294703.304000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294703.316000] NET: Registered protocol family 17
[4294707.091000] NET: Registered protocol family 10
[4294707.091000] Disabled Privacy Extensions on device c02eb280(lo)
[4294707.091000] IPv6 over IPv4 tunneling driver
[4294708.305000] ACPI: Power Button (FF) [PWRF]
[4294708.305000] ACPI: Power Button (CM) [PWRB]
[4294708.428000] ibm_acpi: ec object not found
[4294716.079000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[4294716.079000] apm: overridden by ACPI.
[4294717.175000] eth0: no IPv6 routers present
[4294717.761000] Bluetooth: Core ver 2.7
[4294717.761000] NET: Registered protocol family 31
[4294717.761000] Bluetooth: HCI device and connection manager initialized
[4294717.761000] Bluetooth: HCI socket layer initialized
[4294717.839000] Bluetooth: L2CAP ver 2.7
[4294717.839000] Bluetooth: L2CAP socket layer initialized
[4294717.911000] Bluetooth: RFCOMM ver 1.5
[4294717.911000] Bluetooth: RFCOMM socket layer initialized
[4294717.911000] Bluetooth: RFCOMM TTY layer initialized
[4294728.445000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[4295036.276000] usb 2-1: new full speed USB device using uhci_hcd and address 2
[4295036.578000] Linux video capture interface: v1.00
[4295036.594000] drivers/usb/media/spca5xx/spca5xx-core.c: USB SPCA5XX camera found. Type Creative Instant P0620
[4295036.647000] usbcore: registered new driver spca5xx
[4295036.647000] drivers/usb/media/spca5xx/spca5xx-core.c: spca5xx driver 00.57.02 registered
------------- volgend deel ------------
Bus 005 Device 002: ID 0781:7112 SanDisk Corp. Cruzer Micro 128MB Flash Drive
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 002: ID 041e:4034 Creative Technology, Ltd
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Meer informatie over de Ubuntu-NL
maillijst