[Ubuntu-ni] distribución del ancho de banda
michael castellon
sousuke.eo en gmail.com
Sab Ago 16 17:38:23 BST 2008
la verdad es que no entiendo en que tiene que ver el prosesador con el
problema que se te
presenta de que no hay conexion al usar el firefox...etc, podria ser un
problema con la tarjeta de red o moden que estes usando, ya sabes
driver...etc.
te recomiento que prestes una tarjeta de red a alguien y pruebes si se quita
el problema.
yo te podria prestar una pci y me avisas.
la verdad es que podria ser el prosesador si se te quedara en muerta(no
funciona teclado o mause...etc), aunque hay ocaciones en que las
computadores hacen lo que quieren.
suerte.....
El 8 de agosto de 2008 22:50, Antonio Esgueva Martinez
<aesguevam en gmail.com>escribió:
> Guillermo Belli escribió:
> > Los procesadores celeron siempre han sido una version "castrada" del
> > equivalente Pentium, en este caso seria el Pentium D (que es de las
> > ultimas versiones que salieron del Pentium 4). En Pentium 4 nunca fue
> > muy buen procesador, y los Celeron son mucho peor.
> >
> > Los procesadores Intel con soporte para 64bits anteriores a los Core2,
> > (Pentium D, Celeron D, etc.) agregaron una version modificada del set
> > de instrucciones de AMD64 (tambien llamado x86-64), y solo tenia fines
> > de marketing, porque daban como 40% menor rendimiento corriendo
> > software de 64bits, comparado al mismo de 32bits. con los Core2 ya se
> > puede ver un incremento en el desempeño pasando de software de 32bits
> > a 64bits, pero la diferencia aún es menor que en los procesadores AMD.
> >
> > En cuanto a lo de la tarjeta madre, pues estoy de acuerdo con vos, no
> > son muy buenas. AsRock es una división de Asus, oriendata a otro
> > segmento de mercado. Imaginate que usaron otro nombre para no ensuciar
> > el se Asus :P
> >
> > En todo caso, a pesar del bajo rendimiento y soporte pobre para 64bits
> > que ofrecen el Celeron D, no debería darte problemas de
> > compatibilidad, y no tiene porque darte error al momento de compilar
> > algo. Deberías buscar la causa del problema, a lo mejor memoria
> > defectuosa? Pasale el memtest+ y dejalo toda la noche para verificar.
> > También podría ser sobrecalentamiento del procesador.
> >
> > Qué modelo es tu tarjeta madre? Que chipset tiene? Podría ser mal
> > soporte en linux para tu chipset (controlador de disco, controlador de
> > video, controlador de red, etc.).
> >
> > Saludos.
> >
> > 2008/8/5 Antonio Esgueva Martinez <aesguevam en gmail.com>:
> >
> >> Tengo un problema. Cuando la computadora esta descargando algo del
> >> internet (actualizando el update, descargando archivos boinc), y otro
> >> programa (firefox) quiere hacer uso de este, aparece como que no hay
> >> conexión.
> >> La verdad es que en mi antigua máquina no tenía este problema. Una amd
> >> duron 1300, con 640 Mb en ram y un disco de 30 Gb. Y que si pasaron
> >> distribuciones por ella (Suse, Ubuntu desde la 5.10 hasta 7.10)
> >> Ahora uso una celeron D 1.96 Mhz, con 512 Mb en ram, disco de 80 GB, y
> >> con las supervendidas en nicaragua tarjetas madre Asrock, que para ser
> >> sincero no me convencen.
> >> Hay muchas cosas que no tengo claras con esta compu. Aún siendo mas
> >> poderosa que mi antigua computadora, no le llega ni a los talones en
> >> velocidad de ejecución de programas y en estabilidad, con ninguna de las
> >> arquitecturas, ya que le he instalado Suse 10.1 64 bits, Ubuntu 7.10 64
> >> bits, Ubuntu 7.10 32 bits, y finalmente Ubuntu 8.04 32 bits. Si es mas
> >> rápida en procesamiento por ejemplo ejecutando el boinc, o pasando
> >> canciones en la consola, quemando dvds.
> >>
> >> Los problemas se los achaco al procesador (Intel Celeron D) que ni es de
> >> 64 ni es de 32. Y mi teoría loca es que como los programas ya vienen
> >> compilados en máquinas "estándar"; hay conflictos con estos
> >> procesadores ni chicha ni limonada.
> >>
> >> También digo esto por que quise instalar el Linux From Scratch, y no
> >> pude compilarlo.
> >>
> >> Bueno no los aburro, cualquier idea por donde buscar me responden
> >>
> >>
> >> --
> >> Ubuntu-ni mailing list
> >> Ubuntu-ni en lists.ubuntu.com
> >> Modify settings or unsubscribe at:
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-ni
> >>
> >>
> >
> >
> >
> >
> La tarjeta es una Asrock 775i65G
>
> http://www.asrock.com/mb/overview.la.asp?Model=775i65G&s=775
>
> No he realizado el memtest ya que tarda demasiado
>
> Mando la salida de dmesg >> dmesg.txt
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 2.6.24-19-generic (buildd en terranova) (gcc
> version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Fri Jul 11 23:41:49 UTC
> 2008 (Ubuntu 2.6.24-19.36-generic)
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 000000001df40000 (usable)
> [ 0.000000] BIOS-e820: 000000001df40000 - 000000001df50000 (ACPI data)
> [ 0.000000] BIOS-e820: 000000001df50000 - 000000001e000000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> [ 0.000000] BIOS-e820: 00000000ffbc0000 - 0000000100000000 (reserved)
> [ 0.000000] 0MB HIGHMEM available.
> [ 0.000000] 479MB LOWMEM available.
> [ 0.000000] Entering add_active_range(0, 0, 122688) 0 entries of 256
> used
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0 -> 4096
> [ 0.000000] Normal 4096 -> 122688
> [ 0.000000] HighMem 122688 -> 122688
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[1] active PFN ranges
> [ 0.000000] 0: 0 -> 122688
> [ 0.000000] On node 0 totalpages: 122688
> [ 0.000000] DMA zone: 32 pages used for memmap
> [ 0.000000] DMA zone: 0 pages reserved
> [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
> [ 0.000000] Normal zone: 926 pages used for memmap
> [ 0.000000] Normal zone: 117666 pages, LIFO batch:31
> [ 0.000000] HighMem zone: 0 pages used for memmap
> [ 0.000000] Movable zone: 0 pages used for memmap
> [ 0.000000] DMI 2.3 present.
> [ 0.000000] ACPI: RSDP signature @ 0xC00FAAA0 checksum 0
> [ 0.000000] ACPI: RSDP 000FAAA0, 0014 (r0 ACPIAM)
> [ 0.000000] ACPI: RSDT 1DF40000, 0030 (r1 A M I OEMRSDT 12000505
> MSFT 97)
> [ 0.000000] ACPI: FACP 1DF40200, 0081 (r2 A M I OEMFACP 12000505
> MSFT 97)
> [ 0.000000] ACPI: DSDT 1DF40370, 3AD4 (r1 7i6GV 7i6GV190 190
> INTL 2002026)
> [ 0.000000] ACPI: FACS 1DF50000, 0040
> [ 0.000000] ACPI: APIC 1DF40300, 006C (r1 A M I OEMAPIC 12000505
> MSFT 97)
> [ 0.000000] ACPI: OEMB 1DF50040, 003F (r1 A M I OEMBIOS 12000505
> MSFT 97)
> [ 0.000000] ACPI: PM-Timer IO Port: 0x808
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> [ 0.000000] Processor #0 15:4 APIC version 20
> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
> [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI
> 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] Allocating PCI resources starting at 20000000 (gap:
> 1e000000:e0e00000)
> [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000
> - 00000000000a0000
> [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000
> - 00000000000e6000
> [ 0.000000] swsusp: Registered nosave memory region: 00000000000e6000
> - 0000000000100000
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
> Total pages: 121730
> [ 0.000000] Kernel command line:
> root=UUID=16a445ce-35c9-435a-8a61-f07e2ef0f3b7 ro quiet splash
> [ 0.000000] mapped APIC to ffffb000 (fee00000)
> [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
> [ 0.000000] Enabling fast FPU save and restore... done.
> [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
> [ 0.000000] Initializing CPU#0
> [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
> [ 0.000000] Detected 2796.436 MHz processor.
> [ 9.509687] Console: colour VGA+ 80x25
> [ 9.509691] console [tty0] enabled
> [ 9.509906] Dentry cache hash table entries: 65536 (order: 6, 262144
> bytes)
> [ 9.510139] Inode-cache hash table entries: 32768 (order: 5, 131072
> bytes)
> [ 9.518058] Memory: 474500k/490752k available (2177k kernel code,
> 15700k reserved, 1006k data, 368k init, 0k highmem)
> [ 9.518067] virtual kernel memory layout:
> [ 9.518068] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
> [ 9.518069] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
> [ 9.518070] vmalloc : 0xde800000 - 0xff7fe000 ( 527 MB)
> [ 9.518071] lowmem : 0xc0000000 - 0xddf40000 ( 479 MB)
> [ 9.518072] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
> [ 9.518073] .data : 0xc0320474 - 0xc041bdc4 (1006 kB)
> [ 9.518074] .text : 0xc0100000 - 0xc0320474 (2177 kB)
> [ 9.518078] Checking if this processor honours the WP bit even in
> supervisor mode... Ok.
> [ 9.518115] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4,
> CPUs=1, Nodes=1
> [ 9.598099] Calibrating delay using timer specific routine.. 5597.71
> BogoMIPS (lpj=11195432)
> [ 9.598124] Security Framework initialized
> [ 9.598129] SELinux: Disabled at boot.
> [ 9.598143] AppArmor: AppArmor initialized
> [ 9.598148] Failure registering capabilities with primary security
> module.
> [ 9.598158] Mount-cache hash table entries: 512
> [ 9.598286] Initializing cgroup subsys ns
> [ 9.598293] Initializing cgroup subsys cpuacct
> [ 9.598306] CPU: After generic identify, caps: bfebfbff 20000000
> 00000000 00000000 0000651d 00000000 00000000 00000000
> [ 9.598316] monitor/mwait feature present.
> [ 9.598318] using mwait in idle threads.
> [ 9.598325] CPU: Trace cache: 12K uops, L1 D cache: 16K
> [ 9.598328] CPU: L2 cache: 256K
> [ 9.598330] CPU: Hyper-Threading is disabled
> [ 9.598333] CPU: After all inits, caps: bfebfbff 20000000 00000000
> 0000b180 0000651d 00000000 00000000 00000000
> [ 9.598344] Compat vDSO mapped to ffffe000.
> [ 9.598361] Checking 'hlt' instruction... OK.
> [ 9.614576] SMP alternatives: switching to UP code
> [ 9.616565] Freeing SMP alternatives: 11k freed
> [ 9.616715] Early unpacking initramfs... done
> [ 9.935611] ACPI: Core revision 20070126
> [ 9.935675] ACPI: Looking for DSDT in initramfs... error, file
> /DSDT.aml not found.
> [ 9.937825] CPU0: Intel(R) Celeron(R) CPU 2.80GHz stepping 09
> [ 9.937868] Total of 1 processors activated (5597.71 BogoMIPS).
> [ 9.938047] ENABLING IO-APIC IRQs
> [ 9.938226] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 10.085943] Brought up 1 CPUs
> [ 10.085967] CPU0 attaching sched-domain:
> [ 10.085971] domain 0: span 01
> [ 10.085973] groups: 01
> [ 10.086211] net_namespace: 64 bytes
> [ 10.086221] Booting paravirtualized kernel on bare hardware
> [ 10.086864] Time: 7:27:37 Date: 08/07/08
> [ 10.086897] NET: Registered protocol family 16
> [ 10.087212] EISA bus registered
> [ 10.087245] ACPI: bus type pci registered
> [ 10.087427] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
> [ 10.087430] PCI: Using configuration type 1
> [ 10.087441] Setting up standard PCI resources
> [ 10.098567] ACPI: EC: Look up EC in DSDT
> [ 10.102561] ACPI: Interpreter enabled
> [ 10.102566] ACPI: (supports S0 S1 S3 S4 S5)
> [ 10.102587] ACPI: Using IOAPIC for interrupt routing
> [ 10.110901] ACPI: PCI Root Bridge [PCI0] (0000:00)
> [ 10.111506] Force enabled HPET at base address 0xfed00000
> [ 10.111514] PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
> [ 10.111518] PCI quirk: region 0480-04bf claimed by ICH4 GPIO
> [ 10.111847] PCI: Transparent bridge - 0000:00:1e.0
> [ 10.111877] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [ 10.112004] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
> [ 10.114217] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12
> 14 15)
> [ 10.114338] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12
> 14 15)
> [ 10.114449] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12
> 14 15)
> [ 10.114559] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12
> 14 15)
> [ 10.114668] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12
> 14 15) *0, disabled.
> [ 10.114779] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12
> 14 15) *0, disabled.
> [ 10.114890] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12
> 14 15)
> [ 10.115001] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12
> 14 15)
> [ 10.115197] ACPI Warning (tbutils-0217): Incorrect checksum in table
> [OEMB] - 32, should be 25 [20070126]
> [ 10.115204] Linux Plug and Play Support v0.97 (c) Adam Belay
> [ 10.115265] pnp: PnP ACPI init
> [ 10.115278] ACPI: bus type pnp registered
> [ 10.120865] pnp: PnP ACPI: found 14 devices
> [ 10.120870] ACPI: ACPI bus type pnp unregistered
> [ 10.120875] PnPBIOS: Disabled by ACPI PNP
> [ 10.121258] PCI: Using ACPI for IRQ routing
> [ 10.121263] PCI: If a device doesn't work, try "pci=routeirq". If it
> helps, post a report
> [ 10.133897] NET: Registered protocol family 8
> [ 10.133900] NET: Registered protocol family 20
> [ 10.134055] hpet clockevent registered
> [ 10.134061] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> [ 10.134066] hpet0: 3 64-bit timers, 14318180 Hz
> [ 10.135114] AppArmor: AppArmor Filesystem Enabled
> [ 10.137861] Time: tsc clocksource has been installed.
> [ 10.145936] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
> [ 10.145940] system 00:07: ioport range 0x800-0x87f has been reserved
> [ 10.145943] system 00:07: ioport range 0x480-0x4bf has been reserved
> [ 10.145948] system 00:07: iomem range 0xfed20000-0xfed8ffff has been
> reserved
> [ 10.145951] system 00:07: iomem range 0xffb00000-0xffbfffff could not
> be reserved
> [ 10.145957] system 00:08: iomem range 0xfec00000-0xfec00fff has been
> reserved
> [ 10.145960] system 00:08: iomem range 0xfee00000-0xfee00fff could not
> be reserved
> [ 10.145969] system 00:0c: ioport range 0x680-0x6ff has been reserved
> [ 10.145972] system 00:0c: ioport range 0x295-0x296 has been reserved
> [ 10.145979] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
> [ 10.145982] system 00:0d: iomem range 0xc0000-0xdffff could not be
> reserved
> [ 10.145985] system 00:0d: iomem range 0xe0000-0xfffff could not be
> reserved
> [ 10.145988] system 00:0d: iomem range 0x100000-0x1dffffff could not
> be reserved
> [ 10.145991] system 00:0d: iomem range 0xfff00000-0xffffffff could not
> be reserved
> [ 10.176607] PCI: Bridge: 0000:00:1e.0
> [ 10.176613] IO window: b000-bfff
> [ 10.176619] MEM window: fe500000-fe5fffff
> [ 10.176623] PREFETCH window: disabled.
> [ 10.176638] PCI: Setting latency timer of device 0000:00:1e.0 to 64
> [ 10.176653] NET: Registered protocol family 2
> [ 10.213913] IP route cache hash table entries: 4096 (order: 2, 16384
> bytes)
> [ 10.214178] TCP established hash table entries: 16384 (order: 5,
> 131072 bytes)
> [ 10.214260] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
> [ 10.214340] TCP: Hash tables configured (established 16384 bind 16384)
> [ 10.214343] TCP reno registered
> [ 10.226011] checking if image is initramfs... it is
> [ 10.637635] Switched to high resolution mode on CPU 0
> [ 10.846368] Freeing initrd memory: 7323k freed
> [ 10.847236] audit: initializing netlink socket (disabled)
> [ 10.847252] audit(1218094057.224:1): initialized
> [ 10.849860] VFS: Disk quotas dquot_6.5.1
> [ 10.849971] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [ 10.850168] io scheduler noop registered
> [ 10.850171] io scheduler anticipatory registered
> [ 10.850173] io scheduler deadline registered
> [ 10.850192] io scheduler cfq registered (default)
> [ 10.850207] Boot video device is 0000:00:02.0
> [ 10.850682] isapnp: Scanning for PnP cards...
> [ 11.202495] isapnp: No Plug & Play device found
> [ 11.276740] Real Time Clock Driver v1.12ac
> [ 11.276867] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
> sharing enabled
> [ 11.277023] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 11.278601] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 11.279765] RAMDISK driver initialized: 16 RAM disks of 65536K size
> 1024 blocksize
> [ 11.279864] input: Macintosh mouse button emulation as
> /devices/virtual/input/input0
> [ 11.280017] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at
> 0x60,0x64 irq 1,12
> [ 11.282708] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 11.282714] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 11.285491] mice: PS/2 mouse device common for all mice
> [ 11.285682] EISA: Probing bus 0 at eisa.0
> [ 11.285720] EISA: Detected 0 cards.
> [ 11.285724] cpuidle: using governor ladder
> [ 11.285727] cpuidle: using governor menu
> [ 11.285820] NET: Registered protocol family 1
> [ 11.285853] Using IPI No-Shortcut mode
> [ 11.285887] registered taskstats version 1
> [ 11.285978] Magic number: 4:204:470
> [ 11.286112] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> [ 11.286114] EDD information not available.
> [ 11.286412] Freeing unused kernel memory: 368k freed
> [ 11.313278] input: AT Translated Set 2 keyboard as
> /devices/platform/i8042/serio0/input/input1
> [ 12.567867] fuse init (API version 7.9)
> [ 12.593901] ACPI: Processor [CPU1] (supports 8 throttling states)
> [ 12.593930] ACPI Exception (processor_core-0816): AE_NOT_FOUND,
> Processor Device is not present [20070126]
> [ 12.593944] ACPI Exception (processor_core-0816): AE_NOT_FOUND,
> Processor Device is not present [20070126]
> [ 12.593956] ACPI Exception (processor_core-0816): AE_NOT_FOUND,
> Processor Device is not present [20070126]
> [ 13.246801] usbcore: registered new interface driver usbfs
> [ 13.246832] usbcore: registered new interface driver hub
> [ 13.256246] usbcore: registered new device driver usb
> [ 13.268201] USB Universal Host Controller Interface driver v3.0
> [ 13.268283] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level,
> low) -> IRQ 16
> [ 13.268296] PCI: Setting latency timer of device 0000:00:1d.0 to 64
> [ 13.268300] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> [ 13.268619] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
> bus number 1
> [ 13.268656] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000dc00
> [ 13.268826] usb usb1: configuration #1 chosen from 1 choice
> [ 13.268857] hub 1-0:1.0: USB hub found
> [ 13.268866] hub 1-0:1.0: 2 ports detected
> [ 13.316204] 8139too Fast Ethernet driver 0.9.28
> [ 13.338551] SCSI subsystem initialized
> [ 13.372262] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level,
> low) -> IRQ 17
> [ 13.372277] PCI: Setting latency timer of device 0000:00:1d.1 to 64
> [ 13.372282] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> [ 13.372324] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
> bus number 2
> [ 13.372355] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e000
> [ 13.372489] usb usb2: configuration #1 chosen from 1 choice
> [ 13.372519] hub 2-0:1.0: USB hub found
> [ 13.372527] hub 2-0:1.0: 2 ports detected
> [ 13.392097] libata version 3.00 loaded.
> [ 13.464231] Floppy drive(s): fd0 is 1.44M
> [ 13.476195] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level,
> low) -> IRQ 18
> [ 13.476210] PCI: Setting latency timer of device 0000:00:1d.2 to 64
> [ 13.476215] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> [ 13.476255] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
> bus number 3
> [ 13.476286] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400
> [ 13.476420] usb usb3: configuration #1 chosen from 1 choice
> [ 13.476455] hub 3-0:1.0: USB hub found
> [ 13.476463] hub 3-0:1.0: 2 ports detected
> [ 13.487859] FDC 0 is a post-1991 82077
> [ 13.580167] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level,
> low) -> IRQ 16
> [ 13.580183] PCI: Setting latency timer of device 0000:00:1d.3 to 64
> [ 13.580187] uhci_hcd 0000:00:1d.3: UHCI Host Controller
> [ 13.580224] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
> bus number 4
> [ 13.580250] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e800
> [ 13.580398] usb usb4: configuration #1 chosen from 1 choice
> [ 13.580431] hub 4-0:1.0: USB hub found
> [ 13.580438] hub 4-0:1.0: 2 ports detected
> [ 13.684263] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level,
> low) -> IRQ 19
> [ 13.684283] PCI: Setting latency timer of device 0000:00:1d.7 to 64
> [ 13.684287] ehci_hcd 0000:00:1d.7: EHCI Host Controller
> [ 13.684335] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
> bus number 5
> [ 13.688251] ehci_hcd 0000:00:1d.7: debug port 1
> [ 13.688259] PCI: cache line size of 128 is not supported by device
> 0000:00:1d.7
> [ 13.688271] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe77bc00
> [ 13.703931] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver
> 10 Dec 2004
> [ 13.704070] usb usb5: configuration #1 chosen from 1 choice
> [ 13.704101] hub 5-0:1.0: USB hub found
> [ 13.704110] hub 5-0:1.0: 8 ports detected
> [ 13.808258] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 22 (level,
> low) -> IRQ 20
> [ 13.808938] eth0: RealTek RTL8139 at 0xb800, 00:13:8f:94:b7:d4, IRQ 20
> [ 13.808941] eth0: Identified 8139 chip type 'RTL-8101'
> [ 13.812173] ata_piix 0000:00:1f.1: version 2.12
> [ 13.812194] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level,
> low) -> IRQ 18
> [ 13.812237] PCI: Setting latency timer of device 0000:00:1f.1 to 64
> [ 13.815393] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
> [ 13.816922] scsi0 : ata_piix
> [ 13.818325] scsi1 : ata_piix
> [ 13.819887] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00
> irq 14
> [ 13.819891] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08
> irq 15
> [ 14.148180] ata1.00: ATA-7: SAMSUNG SP0842N, BH100-35, max UDMA/100
> [ 14.148186] ata1.00: 156301488 sectors, multi 16: LBA48
> [ 14.148215] ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-H10A, JL02, max UDMA/33
> [ 14.180050] ata1.00: configured for UDMA/100
> [ 14.351787] ata1.01: configured for UDMA/33
> [ 14.507670] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP0842N
> BH10 PQ: 0 ANSI: 5
> [ 14.511867] scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-H10A
> JL02 PQ: 0 ANSI: 5
> [ 14.533305] Driver 'sd' needs updating - please use bus_type methods
> [ 14.533412] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors
> (80026 MB)
> [ 14.533429] sd 0:0:0:0: [sda] Write Protect is off
> [ 14.533432] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 14.533456] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 14.533517] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors
> (80026 MB)
> [ 14.533531] sd 0:0:0:0: [sda] Write Protect is off
> [ 14.533534] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 14.533556] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 14.533562] sda:<4>Driver 'sr' needs updating - please use bus_type
> methods
> [ 14.542907] sda1 sda2 sda3 sda4 < sda5 sda6 >
> [ 14.578197] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 14.586532] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 14.586559] sr 0:0:1:0: Attached scsi generic sg1 type 5
> [ 14.600585] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw
> xa/form2 cdda tray
> [ 14.600593] Uniform CD-ROM driver Revision: 3.20
> [ 14.600660] sr 0:0:1:0: Attached scsi CD-ROM sr0
> [ 14.945122] Attempting manual resume
> [ 14.945127] swsusp: Resume From Partition 8:1
> [ 14.945129] PM: Checking swsusp image.
> [ 14.945362] PM: Resume from disk failed.
> [ 14.979747] kjournald starting. Commit interval 5 seconds
> [ 14.979767] EXT3-fs: mounted filesystem with ordered data mode.
> [ 21.211830] Linux agpgart interface v0.102
> [ 21.289533] agpgart: Detected an Intel 865 Chipset.
> [ 21.289777] agpgart: Detected 32636K stolen memory.
> [ 21.383784] agpgart: AGP aperture is 128M @ 0xf0000000
> [ 21.603637] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 21.663702] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 21.882018] input: Power Button (FF) as /devices/virtual/input/input2
> [ 21.891592] ACPI: Power Button (FF) [PWRF]
> [ 21.891853] input: Power Button (CM) as /devices/virtual/input/input3
> [ 21.907430] ACPI: Power Button (CM) [PWRB]
> [ 23.268258] intel_rng: FWH not detected
> [ 23.370395] iTCO_vendor_support: vendor-support=0
> [ 23.398652] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02
> (26-Jul-2007)
> [ 23.398835] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1,
> TCOBASE=0x0860)
> [ 23.398906] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> [ 23.600523] input: PC Speaker as /devices/platform/pcspkr/input/input4
> [ 24.703501] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level,
> low) -> IRQ 21
> [ 24.703532] PCI: Setting latency timer of device 0000:00:1f.5 to 64
> [ 25.025700] intel8x0_measure_ac97_clock: measured 55720 usecs
> [ 25.025705] intel8x0: clocking to 48000
> [ 25.065194] input: ImExPS/2 Generic Explorer Mouse as
> /devices/platform/i8042/serio1/input/input5
> [ 25.099027] parport_pc 00:06: reported by Plug and Play ACPI
> [ 25.099133] parport0: PC-style at 0x378 (0x778), irq 7, dma 3
> [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
> [ 26.514747] lp0: using parport0 (interrupt-driven).
> [ 26.574102] Adding 995988k swap on /dev/sda1. Priority:-1 extents:1
> across:995988k
> [ 27.138478] EXT3 FS on sda2, internal journal
> [ 27.858882] kjournald starting. Commit interval 5 seconds
> [ 27.859093] EXT3 FS on sda5, internal journal
> [ 27.859099] EXT3-fs: mounted filesystem with ordered data mode.
> [ 28.318262] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 29.164790] No dock devices found.
> [ 29.816390] NET: Registered protocol family 10
> [ 29.816999] lo: Disabled Privacy Extensions
> [ 29.982094] apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
> [ 29.982102] apm: overridden by ACPI.
> [ 30.221058] ppdev: user-space parallel port driver
> [ 30.844053] audit(1218115677.443:2): type=1503
> operation="inode_permission" requested_mask="a::" denied_mask="a::"
> name="/dev/tty" pid=4875 profile="/usr/sbin/cupsd" namespace="default"
> [ 36.729077] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
> [ 36.951983] Bluetooth: Core ver 2.11
> [ 36.952783] NET: Registered protocol family 31
> [ 36.952789] Bluetooth: HCI device and connection manager initialized
> [ 36.952793] Bluetooth: HCI socket layer initialized
> [ 37.054934] Bluetooth: L2CAP ver 2.9
> [ 37.054940] Bluetooth: L2CAP socket layer initialized
> [ 37.198774] Bluetooth: RFCOMM socket layer initialized
> [ 37.198796] Bluetooth: RFCOMM TTY layer initialized
> [ 37.198798] Bluetooth: RFCOMM ver 1.8
> [ 39.845867] [drm] Initialized drm 1.1.0 20060810
> [ 39.868339] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level,
> low) -> IRQ 16
> [ 39.868352] PCI: Setting latency timer of device 0000:00:02.0 to 64
> [ 39.868453] [drm] Initialized i915 1.6.0 20060119 on minor 0
> [ 39.949531] NET: Registered protocol family 17
> [ 51.810964] eth0: no IPv6 routers present
>
> La salida del lspci
>
> 00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM
> Controller/Host-Hub Interface (rev 02)
> 00:02.0 VGA compatible controller: Intel Corporation 82865G Integrated
> Graphics Controller (rev 02)
> 00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
> UHCI Controller #1 (rev 02)
> 00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
> UHCI Controller #2 (rev 02)
> 00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
> UHCI Controller #3 (rev 02)
> 00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
> UHCI Controller #4 (rev 02)
> 00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2
> EHCI Controller (rev 02)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
> 00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC
> Interface Bridge (rev 02)
> 00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE
> Controller (rev 02)
> 00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus
> Controller (rev 02)
> 00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER
> (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
> 01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL-8139/8139C/8139C+ (rev 10)
>
>
> --
> Ubuntu-ni mailing list
> Ubuntu-ni en lists.ubuntu.com
> Modify settings or unsubscribe at:
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-ni
>
------------ próxima parte ------------
Se ha borrado un adjunto en formato HTML...
URL: https://lists.ubuntu.com/archives/ubuntu-ni/attachments/20080816/0f1a51a6/attachment.htm
Más información sobre la lista de distribución Ubuntu-ni