[Bug 333127] Re: Firefox 3.5 and above crash on full screen flash video

[BUBUNTU]

Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.6pre) Gecko/20091116
Ubuntu/9.04 (jaunty) Shiretoko/3.5.6pre

Crashes when running a youtube video and i try to maximize it. Awful!!
I have a Dell E6400 

lspci | grep -i vga
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)


[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-15-generic (buildd at rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #50-Ubuntu SMP Tue Nov 10 14:54:29 UTC 2009 (Ubuntu 2.6.31-15.50-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dd04d400 (usable)
[ 0.000000] BIOS-e820: 00000000dd04d400 - 00000000dd04f400 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dd04f400 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe60000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0xdd04d max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 800000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 0DDC00000 mask FFFC00000 uncachable
[ 0.000000] 3 base 0DE000000 mask FFE000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000ddc00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f000 (usable)
[ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000dd04d400 (usable)
[ 0.000000] modified: 00000000dd04d400 - 00000000dd04f400 (ACPI NVS)
[ 0.000000] modified: 00000000dd04f400 - 00000000e0000000 (reserved)
[ 0.000000] modified: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed18000 - 00000000fed1c000 (reserved)
[ 0.000000] modified: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] modified: 00000000feda0000 - 00000000feda6000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] modified: 00000000ffe60000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 378a3000 - 37fef944
[ 0.000000] Allocated new RAMDISK: 008ad000 - 00ff9944
[ 0.000000] Move RAMDISK from 00000000378a3000 - 0000000037fef943 to 008ad000 - 00ff9943
[ 0.000000] ACPI: RSDP 000fb9c0 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT dd051e00 0006C (v01 DELL M09 27D9020D ASL 00000061)
[ 0.000000] ACPI: FACP dd051c9c 000F4 (v04 DELL M09 27D9020D ASL 00000061)
[ 0.000000] ACPI: DSDT dd052400 06A2B (v02 INT430 SYSFexxx 00001001 INTL 20050624)
[ 0.000000] ACPI: FACS dd060c00 00040
[ 0.000000] ACPI: HPET dd051f00 00038 (v01 DELL M09 00000001 ASL 00000061)
[ 0.000000] ACPI: ____ dd060400 00030 (v01 DELL M09 27D9020D ASL 00000061)
[ 0.000000] ACPI: APIC dd052000 00068 (v01 DELL M09 27D9020D ASL 00000047)
[ 0.000000] ACPI: ASF! dd051c00 0006A (v32 DELL M09 27D9020D ASL 00000061)
[ 0.000000] ACPI: MCFG dd051fc0 0003E (v16 DELL M09 27D9020D ASL 00000061)
[ 0.000000] ACPI: TCPA dd052300 00032 (v01 00000000 ASL 00000000)
[ 0.000000] ACPI: SLIC dd05209c 00176 (v01 DELL M09 27D9020D ASL 00000061)
[ 0.000000] ACPI: SSDT dd0502eb 0066C (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2648MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0]
[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #5 [00008a9000 - 00008ac184] BRK ==> [00008a9000 - 00008ac184]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00008ad000 - 0000ff9944] NEW RAMDISK ==> [00008ad000 - 0000ff9944]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000dd04d
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000dd04d
[ 0.000000] On node 0 totalpages: 905192
[ 0.000000] free_area_init_node: node 0, pgdat c0784940, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 5297 pages used for memmap
[ 0.000000] HighMem zone: 672670 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c2bb8000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 898119
[ 0.000000] Kernel command line: root=UUID=1af17067-7ff7-4eb5-a829-1489943fbb77 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 18105860 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:000dd04d)
[ 0.000000] Memory: 3557568k/3621172k available (4566k kernel code, 62340k reserved, 2142k data, 540k init, 2711868k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB)
[ 0.000000] .data : 0xc0575b44 - 0xc078d3c8 (2142 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0575b44 (4566 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2659.735 MHz processor.
[ 0.001195] Console: colour VGA+ 80x25
[ 0.001197] console [tty0] enabled
[ 0.001325] hpet clockevent registered
[ 0.001328] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.001333] Calibrating delay loop (skipped), value calculated using timer frequency.. 5319.47 BogoMIPS (lpj=10638940)
[ 0.001348] Security Framework initialized
[ 0.001364] AppArmor: AppArmor initialized
[ 0.001370] Mount-cache hash table entries: 512
[ 0.001468] Initializing cgroup subsys ns
[ 0.001473] Initializing cgroup subsys cpuacct
[ 0.001476] Initializing cgroup subsys memory
[ 0.001481] Initializing cgroup subsys freezer
[ 0.001483] Initializing cgroup subsys net_cls
[ 0.001494] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.001496] CPU: L2 cache: 6144K
[ 0.001498] CPU: Physical Processor ID: 0
[ 0.001500] CPU: Processor Core ID: 0
[ 0.001503] mce: CPU supports 6 MCE banks
[ 0.001509] CPU0: Thermal monitoring enabled (TM2)
[ 0.001512] using mwait in idle threads.
[ 0.001517] Performance Counters: Core2 events, Intel PMU driver.
[ 0.001523] ... version: 2
[ 0.001525] ... bit width: 40
[ 0.001526] ... generic counters: 2
[ 0.001527] ... value mask: 000000ffffffffff
[ 0.001529] ... max period: 000000007fffffff
[ 0.001530] ... fixed-purpose counters: 3
[ 0.001531] ... counter mask: 0000000700000003
[ 0.001536] Checking 'hlt' instruction... OK.
[ 0.018105] ACPI: Core revision 20090521
[ 0.028384] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068507] CPU0: Intel(R) Core(TM)2 Duo CPU T9550 @ 2.66GHz stepping 0a
[ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5319.95 BogoMIPS (lpj=10639915)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 6144K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.157654] CPU1: Intel(R) Core(TM)2 Duo CPU T9550 @ 2.66GHz stepping 0a
[ 0.157666] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.160018] Brought up 2 CPUs
[ 0.160020] Total of 2 processors activated (10639.42 BogoMIPS).
[ 0.160067] CPU0 attaching sched-domain:
[ 0.160069] domain 0: span 0-1 level MC
[ 0.160071] groups: 0 1
[ 0.160075] CPU1 attaching sched-domain:
[ 0.160077] domain 0: span 0-1 level MC
[ 0.160078] groups: 1 0
[ 0.160137] Booting paravirtualized kernel on bare hardware
[ 0.160157] regulator: core version 0.5
[ 0.160157] Time: 9:22:56 Date: 11/25/09
[ 0.160157] NET: Registered protocol family 16
[ 0.160164] EISA bus registered
[ 0.160172] ACPI: bus type pci registered
[ 0.160224] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.160226] PCI: MCFG area at f8000000 reserved in E820
[ 0.160227] PCI: Using MMCONFIG for extended config space
[ 0.160229] PCI: Using configuration type 1 for base access
[ 0.160966] bio: create slab <bio-0> at 0
[ 0.160966] ACPI: EC: Look up EC in DSDT
[ 0.160966] ACPI: BIOS _OSI(Linux) query ignored
[ 0.216019] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.232179] ACPI: Interpreter enabled
[ 0.232179] ACPI: (supports S0 S3 S4 S5)
[ 0.232179] ACPI: Using IOAPIC for interrupt routing
[ 0.331935] ACPI: EC: GPE = 0x11, I/O: command/status = 0x934, data = 0x930
[ 0.331937] ACPI: EC: driver started in interrupt mode
[ 0.334693] ACPI: No dock devices found.
[ 0.351469] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.351540] pci 0000:00:02.0: reg 10 64bit mmio: [0xf6c00000-0xf6ffffff]
[ 0.351546] pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff]
[ 0.351551] pci 0000:00:02.0: reg 20 io port: [0xef98-0xef9f]
[ 0.351583] pci 0000:00:02.1: reg 10 64bit mmio: [0xf6b00000-0xf6bfffff]
[ 0.351689] pci 0000:00:19.0: reg 10 32bit mmio: [0xf6ae0000-0xf6afffff]
[ 0.351696] pci 0000:00:19.0: reg 14 32bit mmio: [0xf6adb000-0xf6adbfff]
[ 0.351703] pci 0000:00:19.0: reg 18 io port: [0xefe0-0xefff]
[ 0.351757] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.351761] pci 0000:00:19.0: PME# disabled
[ 0.351824] pci 0000:00:1a.0: reg 20 io port: [0x6f60-0x6f7f]
[ 0.351912] pci 0000:00:1a.1: reg 20 io port: [0x6f80-0x6f9f]
[ 0.352000] pci 0000:00:1a.2: reg 20 io port: [0x6fa0-0x6fbf]
[ 0.352090] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
[ 0.352154] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.352159] pci 0000:00:1a.7: PME# disabled
[ 0.352212] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6adc000-0xf6adffff]
[ 0.352269] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.352274] pci 0000:00:1b.0: PME# disabled
[ 0.352354] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.352358] pci 0000:00:1c.0: PME# disabled
[ 0.352442] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.352446] pci 0000:00:1c.1: PME# disabled
[ 0.352531] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.352535] pci 0000:00:1c.2: PME# disabled
[ 0.352619] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.352623] pci 0000:00:1c.3: PME# disabled
[ 0.352697] pci 0000:00:1d.0: reg 20 io port: [0x6f00-0x6f1f]
[ 0.352785] pci 0000:00:1d.1: reg 20 io port: [0x6f20-0x6f3f]
[ 0.352873] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
[ 0.352961] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
[ 0.353026] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.353031] pci 0000:00:1d.7: PME# disabled
[ 0.353273] pci 0000:00:1f.2: reg 10 io port: [0x6e70-0x6e77]
[ 0.353280] pci 0000:00:1f.2: reg 14 io port: [0x6e78-0x6e7b]
[ 0.353287] pci 0000:00:1f.2: reg 18 io port: [0x6e80-0x6e87]
[ 0.353294] pci 0000:00:1f.2: reg 1c io port: [0x6e88-0x6e8b]
[ 0.353301] pci 0000:00:1f.2: reg 20 io port: [0x6ea0-0x6ebf]
[ 0.353308] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfed1c800-0xfed1cfff]
[ 0.353353] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.353357] pci 0000:00:1f.2: PME# disabled
[ 0.353395] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf6adaf00-0xf6adafff]
[ 0.353413] pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f]
[ 0.353734] pci 0000:0c:00.0: reg 10 64bit mmio: [0xf69fc000-0xf69fffff]
[ 0.353832] pci 0000:0c:00.0: supports D1 D2
[ 0.353834] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
[ 0.353842] pci 0000:0c:00.0: PME# disabled
[ 0.353930] pci 0000:00:1c.1: bridge 32bit mmio: [0xf6900000-0xf69fffff]
[ 0.354052] pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff]
[ 0.354056] pci 0000:00:1c.3: bridge 32bit mmio: [0xf6600000-0xf68fffff]
[ 0.354064] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf0000000-0xf01fffff]
[ 0.354107] pci 0000:03:01.0: reg 10 32bit mmio: [0xf65ff800-0xf65fffff]
[ 0.354163] pci 0000:03:01.0: supports D1 D2
[ 0.354164] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.354169] pci 0000:03:01.0: PME# disabled
[ 0.354210] pci 0000:03:01.1: reg 10 32bit mmio: [0xf65ff600-0xf65ff6ff]
[ 0.354265] pci 0000:03:01.1: supports D1 D2
[ 0.354266] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.354271] pci 0000:03:01.1: PME# disabled
[ 0.354310] pci 0000:03:01.2: reg 10 32bit mmio: [0xf65ff700-0xf65ff7ff]
[ 0.354367] pci 0000:03:01.2: supports D1 D2
[ 0.354368] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.354372] pci 0000:03:01.2: PME# disabled
[ 0.354442] pci 0000:00:1e.0: transparent bridge
[ 0.354449] pci 0000:00:1e.0: bridge 32bit mmio: [0xf6500000-0xf65fffff]
[ 0.354484] pci_bus 0000:00: on NUMA node 0
[ 0.354488] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.354708] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 0.354814] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.354871] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.354926] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.354981] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.365029] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
[ 0.365123] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3
[ 0.365216] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
[ 0.365308] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
[ 0.365401] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.365495] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.365591] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.365675] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.365809] SCSI subsystem initialized
[ 0.365823] libata version 3.00 loaded.
[ 0.365823] usbcore: registered new interface driver usbfs
[ 0.365823] usbcore: registered new interface driver hub
[ 0.365823] usbcore: registered new device driver usb
[ 0.365823] ACPI: WMI: Mapper loaded
[ 0.365823] PCI: Using ACPI for IRQ routing
[ 0.376007] Bluetooth: Core ver 2.15
[ 0.376018] NET: Registered protocol family 31
[ 0.376018] Bluetooth: HCI device and connection manager initialized
[ 0.376018] Bluetooth: HCI socket layer initialized
[ 0.376018] NetLabel: Initializing
[ 0.376018] NetLabel: domain hash size = 128
[ 0.376018] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.376024] NetLabel: unlabeled traffic allowed by default
[ 0.376048] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.376053] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.392008] pnp: PnP ACPI init
[ 0.392014] ACPI: bus type pnp registered
[ 0.459209] pnp: PnP ACPI: found 14 devices
[ 0.459211] ACPI: ACPI bus type pnp unregistered
[ 0.459213] PnPBIOS: Disabled by ACPI PNP
[ 0.459221] system 00:05: ioport range 0xc80-0xcaf has been reserved
[ 0.459223] system 00:05: ioport range 0xcc0-0xcff could not be reserved
[ 0.459229] system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.459233] system 00:0a: ioport range 0xcb0-0xcbb has been reserved
[ 0.459235] system 00:0a: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.459240] system 00:0b: ioport range 0x900-0x92f has been reserved
[ 0.459242] system 00:0b: ioport range 0x931-0x933 has been reserved
[ 0.459244] system 00:0b: ioport range 0x935-0x97f has been reserved
[ 0.459246] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[ 0.459248] system 00:0b: ioport range 0x1000-0x1005 has been reserved
[ 0.459250] system 00:0b: ioport range 0x1008-0x100f has been reserved
[ 0.459254] system 00:0c: ioport range 0xf400-0xf4fe has been reserved
[ 0.459256] system 00:0c: ioport range 0x1006-0x1007 has been reserved
[ 0.459258] system 00:0c: ioport range 0x100a-0x1059 could not be reserved
[ 0.459260] system 00:0c: ioport range 0x1060-0x107f has been reserved
[ 0.459262] system 00:0c: ioport range 0x1080-0x10bf has been reserved
[ 0.459264] system 00:0c: ioport range 0x1100-0x111f has been reserved
[ 0.459266] system 00:0c: ioport range 0x1010-0x102f has been reserved
[ 0.459268] system 00:0c: ioport range 0x809-0x809 has been reserved
[ 0.459273] system 00:0d: iomem range 0x0-0x9efff could not be reserved
[ 0.459275] system 00:0d: iomem range 0x9f000-0x9ffff could not be reserved
[ 0.459277] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[ 0.459279] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.459281] system 00:0d: iomem range 0x100000-0xdd04d3ff could not be reserved
[ 0.459284] system 00:0d: iomem range 0xdd04d400-0xddafffff could not be reserved
[ 0.459286] system 00:0d: iomem range 0xddb00000-0xddbfffff has been reserved
[ 0.459288] system 00:0d: iomem range 0xffe00000-0xffffffff could not be reserved
[ 0.459290] system 00:0d: iomem range 0xffa00000-0xffbfffff has been reserved
[ 0.459292] system 00:0d: iomem range 0xfec00000-0xfec0ffff could not be reserved
[ 0.459295] system 00:0d: iomem range 0xfee00000-0xfee0ffff has been reserved
[ 0.459297] system 00:0d: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.459299] system 00:0d: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.459301] system 00:0d: iomem range 0xfeda0000-0xfeda3fff has been reserved
[ 0.459303] system 00:0d: iomem range 0xfeda4000-0xfeda4fff has been reserved
[ 0.459305] system 00:0d: iomem range 0xfeda5000-0xfeda5fff has been reserved
[ 0.459308] system 00:0d: iomem range 0xfeda6000-0xfeda6fff has been reserved
[ 0.459310] system 00:0d: iomem range 0xfed1c800-0xfed1cfff has been reserved
[ 0.459312] system 00:0d: iomem range 0xfed18000-0xfed1bfff has been reserved
[ 0.459314] system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.493927] AppArmor: AppArmor Filesystem Enabled
[ 0.493985] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
[ 0.493987] pci 0000:00:1c.0: IO window: disabled
[ 0.493992] pci 0000:00:1c.0: MEM window: disabled
[ 0.493996] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.494001] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
[ 0.494002] pci 0000:00:1c.1: IO window: disabled
[ 0.494008] pci 0000:00:1c.1: MEM window: 0xf6900000-0xf69fffff
[ 0.494012] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.494016] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:0d
[ 0.494018] pci 0000:00:1c.2: IO window: disabled
[ 0.494023] pci 0000:00:1c.2: MEM window: disabled
[ 0.494026] pci 0000:00:1c.2: PREFETCH window: disabled
[ 0.494031] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0e
[ 0.494034] pci 0000:00:1c.3: IO window: 0xd000-0xdfff
[ 0.494039] pci 0000:00:1c.3: MEM window: 0xf6600000-0xf68fffff
[ 0.494044] pci 0000:00:1c.3: PREFETCH window: 0x000000f0000000-0x000000f01fffff
[ 0.494051] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.494052] pci 0000:00:1e.0: IO window: disabled
[ 0.494058] pci 0000:00:1e.0: MEM window: 0xf6500000-0xf65fffff
[ 0.494062] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.494073] alloc irq_desc for 16 on node -1
[ 0.494074] alloc kstat_irqs on node -1
[ 0.494077] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.494082] pci 0000:00:1c.0: setting latency timer to 64
[ 0.494091] alloc irq_desc for 17 on node -1
[ 0.494093] alloc kstat_irqs on node -1
[ 0.494095] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.494100] pci 0000:00:1c.1: setting latency timer to 64
[ 0.494107] alloc irq_desc for 18 on node -1
[ 0.494109] alloc kstat_irqs on node -1
[ 0.494113] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.494117] pci 0000:00:1c.2: setting latency timer to 64
[ 0.494125] alloc irq_desc for 19 on node -1
[ 0.494126] alloc kstat_irqs on node -1
[ 0.494128] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.494133] pci 0000:00:1c.3: setting latency timer to 64
[ 0.494140] pci 0000:00:1e.0: setting latency timer to 64
[ 0.494144] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.494146] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.494148] pci_bus 0000:0c: resource 1 mem: [0xf6900000-0xf69fffff]
[ 0.494150] pci_bus 0000:0e: resource 0 io: [0xd000-0xdfff]
[ 0.494151] pci_bus 0000:0e: resource 1 mem: [0xf6600000-0xf68fffff]
[ 0.494153] pci_bus 0000:0e: resource 2 pref mem [0xf0000000-0xf01fffff]
[ 0.494155] pci_bus 0000:03: resource 1 mem: [0xf6500000-0xf65fffff]
[ 0.494157] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.494159] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[ 0.494180] NET: Registered protocol family 2
[ 0.494244] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.494449] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.494724] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.494863] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.494864] TCP reno registered
[ 0.494908] NET: Registered protocol family 1
[ 0.494947] Trying to unpack rootfs image as initramfs...
[ 0.501696] Switched to high resolution mode on CPU 1
[ 0.504014] Switched to high resolution mode on CPU 0
[ 0.636495] Freeing initrd memory: 7474k freed
[ 0.639299] cpufreq-nforce2: No nForce2 chipset.
[ 0.639322] Scanning for low memory corruption every 60 seconds
[ 0.639404] audit: initializing netlink socket (disabled)
[ 0.639421] type=2000 audit(1259140976.636:1): initialized
[ 0.645933] highmem bounce pool size: 64 pages
[ 0.645937] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.647030] VFS: Disk quotas dquot_6.5.2
[ 0.647074] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.647474] fuse init (API version 7.12)
[ 0.647535] msgmni has been set to 1668
[ 0.647691] alg: No test for stdrng (krng)
[ 0.647702] io scheduler noop registered
[ 0.647703] io scheduler anticipatory registered
[ 0.647705] io scheduler deadline registered
[ 0.647735] io scheduler cfq registered (default)
[ 0.647744] pci 0000:00:02.0: Boot video device
[ 0.648007] alloc irq_desc for 24 on node -1
[ 0.648008] alloc kstat_irqs on node -1
[ 0.648019] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.648030] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.648171] alloc irq_desc for 25 on node -1
[ 0.648173] alloc kstat_irqs on node -1
[ 0.648180] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.648190] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.648324] alloc irq_desc for 26 on node -1
[ 0.648326] alloc kstat_irqs on node -1
[ 0.648333] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.648343] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 0.648477] alloc irq_desc for 27 on node -1
[ 0.648479] alloc kstat_irqs on node -1
[ 0.648486] pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
[ 0.648496] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 0.648588] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.648687] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.648819] ACPI: AC Adapter [AC] (on-line)
[ 0.648878] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.649620] ACPI: Lid Switch [LID]
[ 0.649661] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.649666] ACPI: Power Button [PBTN]
[ 0.649698] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.649700] ACPI: Sleep Button [SBTN]
[ 0.650329] ACPI: SSDT dd050957 002C3 (v01 PmRef BspIst 00003000 INTL 20050624)
[ 0.651382] ACPI: SSDT dd050df1 005C6 (v01 PmRef BspCst 00003001 INTL 20050624)
[ 0.651728] Monitor-Mwait will be used to enter C-1 state
[ 0.651746] Monitor-Mwait will be used to enter C-2 state
[ 0.651763] Monitor-Mwait will be used to enter C-3 state
[ 0.651769] Marking TSC unstable due to TSC halts in idle
[ 0.651784] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.651804] processor LNXCPU:00: registered as cooling_device0
[ 0.651807] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.652199] ACPI: SSDT dd050c1a 001D7 (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.652471] ACPI: SSDT dd0513b7 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.652869] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.652885] processor LNXCPU:01: registered as cooling_device1
[ 0.652887] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.682001] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.682007] ACPI: Thermal Zone [THM] (25 C)
[ 0.682056] isapnp: Scanning for PnP cards...
[ 0.766783] ACPI: Battery Slot [BAT0] (battery present)
[ 0.766819] ACPI: Battery Slot [BAT1] (battery absent)
[ 1.036165] isapnp: No Plug & Play device found
[ 1.036981] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.037123] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.037434] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.038203] brd: module loaded
[ 1.038538] loop: module loaded
[ 1.038588] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 1.038644] ahci 0000:00:1f.2: version 3.0
[ 1.038655] ahci 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.038681] alloc irq_desc for 28 on node -1
[ 1.038682] alloc kstat_irqs on node -1
[ 1.038690] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[ 1.038740] ahci: SSS flag set, parallel bus scan disabled
[ 1.038775] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 1.038777] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems
[ 1.038782] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.061049] scsi0 : ahci
[ 1.061113] scsi1 : ahci
[ 1.061154] scsi2 : ahci
[ 1.061197] scsi3 : ahci
[ 1.061239] scsi4 : ahci
[ 1.061280] scsi5 : ahci
[ 1.061582] ata1: SATA max UDMA/133 abar m2048 at 0xfed1c800 port 0xfed1c900 irq 28
[ 1.061586] ata2: SATA max UDMA/133 abar m2048 at 0xfed1c800 port 0xfed1c980 irq 28
[ 1.061587] ata3: DUMMY
[ 1.061588] ata4: DUMMY
[ 1.061591] ata5: SATA max UDMA/133 abar m2048 at 0xfed1c800 port 0xfed1cb00 irq 28
[ 1.061594] ata6: SATA max UDMA/133 abar m2048 at 0xfed1c800 port 0xfed1cb80 irq 28
[ 1.062266] Fixed MDIO Bus: probed
[ 1.062290] PPP generic driver version 2.4.2
[ 1.062346] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.062360] alloc irq_desc for 22 on node -1
[ 1.062362] alloc kstat_irqs on node -1
[ 1.062365] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.062374] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.062377] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.062408] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.066305] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.066312] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.066322] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
[ 1.081011] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.081076] usb usb1: configuration #1 chosen from 1 choice
[ 1.081098] hub 1-0:1.0: USB hub found
[ 1.081106] hub 1-0:1.0: 6 ports detected
[ 1.081156] alloc irq_desc for 20 on node -1
[ 1.081158] alloc kstat_irqs on node -1
[ 1.081161] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.081169] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.081171] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.081194] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.085104] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.085110] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.085120] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
[ 1.100015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.100058] usb usb2: configuration #1 chosen from 1 choice
[ 1.100077] hub 2-0:1.0: USB hub found
[ 1.100082] hub 2-0:1.0: 6 ports detected
[ 1.100130] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.100144] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.100159] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.100164] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.100167] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.100192] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.100217] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
[ 1.100275] usb usb3: configuration #1 chosen from 1 choice
[ 1.100293] hub 3-0:1.0: USB hub found
[ 1.100298] hub 3-0:1.0: 2 ports detected
[ 1.100335] alloc irq_desc for 21 on node -1
[ 1.100337] alloc kstat_irqs on node -1
[ 1.100340] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.100345] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.100348] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.100369] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.100399] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
[ 1.100458] usb usb4: configuration #1 chosen from 1 choice
[ 1.100478] hub 4-0:1.0: USB hub found
[ 1.100483] hub 4-0:1.0: 2 ports detected
[ 1.100518] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.100524] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.100526] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.100549] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.100572] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0
[ 1.100629] usb usb5: configuration #1 chosen from 1 choice
[ 1.100650] hub 5-0:1.0: USB hub found
[ 1.100654] hub 5-0:1.0: 2 ports detected
[ 1.100690] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.100696] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.100699] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.100719] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.100742] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
[ 1.100798] usb usb6: configuration #1 chosen from 1 choice
[ 1.100818] hub 6-0:1.0: USB hub found
[ 1.100824] hub 6-0:1.0: 2 ports detected
[ 1.100858] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.100865] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.100868] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.100888] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.100912] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
[ 1.100969] usb usb7: configuration #1 chosen from 1 choice
[ 1.100988] hub 7-0:1.0: USB hub found
[ 1.100992] hub 7-0:1.0: 2 ports detected
[ 1.101037] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.101043] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.101046] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.101067] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.101090] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[ 1.101147] usb usb8: configuration #1 chosen from 1 choice
[ 1.101166] hub 8-0:1.0: USB hub found
[ 1.101170] hub 8-0:1.0: 2 ports detected
[ 1.101245] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.101498] i8042.c: Warning: Keylock active.
[ 1.105296] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.105300] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.105335] mice: PS/2 mouse device common for all mice
[ 1.105411] rtc_cmos 00:03: RTC can wake from S4
[ 1.105433] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.105460] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.105531] device-mapper: uevent: version 1.0.3
[ 1.105599] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel at redhat.com
[ 1.105665] device-mapper: multipath: version 1.1.0 loaded
[ 1.105667] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.105756] EISA: Probing bus 0 at eisa.0
[ 1.105758] EISA: Cannot allocate resource for mainboard
[ 1.105760] Cannot allocate resource for EISA slot 1
[ 1.105785] EISA: Detected 0 cards.
[ 1.105928] cpuidle: using governor ladder
[ 1.106021] cpuidle: using governor menu
[ 1.106373] TCP cubic registered
[ 1.106486] NET: Registered protocol family 10
[ 1.106813] lo: Disabled Privacy Extensions
[ 1.107054] NET: Registered protocol family 17
[ 1.107066] Bluetooth: L2CAP ver 2.13
[ 1.107067] Bluetooth: L2CAP socket layer initialized
[ 1.107069] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.107070] Bluetooth: SCO socket layer initialized
[ 1.107101] Bluetooth: RFCOMM TTY layer initialized
[ 1.107103] Bluetooth: RFCOMM socket layer initialized
[ 1.107104] Bluetooth: RFCOMM ver 1.11
[ 1.107748] Using IPI No-Shortcut mode
[ 1.107796] PM: Resume from disk failed.
[ 1.107803] registered taskstats version 1
[ 1.107883] Magic number: 1:685:374
[ 1.107944] rtc_cmos 00:03: setting system clock to 2009-11-25 09:22:57 UTC (1259140977)
[ 1.107946] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.107948] EDD information not available.
[ 1.109197] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.500105] Clocksource tsc unstable (delta = -340723524 ns)
[ 1.552119] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.553053] ata1.00: ATA-8: Hitachi HTS723216L9A362, FC2OC30F, max UDMA/133
[ 1.553056] ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 31/32)
[ 1.554221] ata1.00: configured for UDMA/133
[ 1.568249] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72321 FC2O PQ: 0 ANSI: 5
[ 1.568344] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.568378] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.568411] sd 0:0:0:0: [sda] Write Protect is off
[ 1.568413] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.568430] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.568512] sda: sda1 sda2 sda3 < sda5 sda6 > sda4
[ 1.628782] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.744148] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 1.916333] usb 3-1: configuration #1 chosen from 1 choice
[ 1.918307] hub 3-1:1.0: USB hub found
[ 1.920278] hub 3-1:1.0: 3 ports detected
[ 2.164228] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 2.340690] usb 5-1: configuration #0 chosen from 1 choice
[ 2.340692] usb 5-1: config 0 descriptor??
[ 2.425276] usb 3-1.1: new full speed USB device using uhci_hcd and address 3
[ 2.456061] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.474796] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-U633A, D200, max UDMA/100, ATAPI AN
[ 2.474815] ata2.00: applying bridge limits
[ 2.493102] ata2.00: configured for UDMA/100
[ 2.510351] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-U633A D200 PQ: 0 ANSI: 5
[ 2.516190] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.516194] Uniform CD-ROM driver Revision: 3.20
[ 2.516277] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.516321] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.545330] usb 3-1.1: configuration #1 chosen from 1 choice
[ 2.621275] usb 3-1.2: new full speed USB device using uhci_hcd and address 4
[ 2.743331] usb 3-1.2: configuration #1 chosen from 1 choice
[ 2.836225] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.172224] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.188356] Freeing unused kernel memory: 540k freed
[ 3.188641] Write protecting the kernel text: 4568k
[ 3.188689] Write protecting the kernel read-only data: 1836k
[ 3.284798] Linux agpgart interface v0.103
[ 3.286898] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
[ 3.288645] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 3.321934] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 3.321936] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 3.333249] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 3.333520] e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.333526] e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb
[ 3.333531] e1000e 0000:00:19.0: setting latency timer to 64
[ 3.333624] alloc irq_desc for 29 on node -1
[ 3.333626] alloc kstat_irqs on node -1
[ 3.333638] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[ 3.344612] ohci1394 0000:03:01.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.351239] usbcore: registered new interface driver hiddev
[ 3.355513] input: HID 413c:8157 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input5
[ 3.355558] generic-usb 0003:413C:8157.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:1a.0-1.1/input0
[ 3.359556] input: HID 413c:8158 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input6
[ 3.359601] generic-usb 0003:413C:8158.0002: input,hidraw1: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:1a.0-1.2/input0
[ 3.359610] usbcore: registered new interface driver usbhid
[ 3.359611] usbhid: v2.6:USB HID core driver
[ 3.407294] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f65ff800-f65fffff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 3.411359] [drm] Initialized drm 1.1.0 20060810
[ 3.441458] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:21:70:ec:83:38
[ 3.441460] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 3.441487] 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1004ff-0ff
[ 3.441609] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.441612] i915 0000:00:02.0: setting latency timer to 64
[ 3.442501] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 3.442503] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 3.442646] alloc irq_desc for 30 on node -1
[ 3.442648] alloc kstat_irqs on node -1
[ 3.442655] i915 0000:00:02.0: irq 30 for MSI/MSI-X
[ 3.548646] [drm] i2c_init DPDDC-B
[ 3.558367] [drm] i2c_init DPDDC-C
[ 3.563371] [drm] i2c_init DPDDC-D
[ 3.682071] i2c-adapter i2c-2: unable to read EDID block.
[ 3.682073] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 3.686468] i2c-adapter i2c-4: unable to read EDID block.
[ 3.686470] i915 0000:00:02.0: HDMI Type A-2: no EDID data
[ 4.000421] [drm] TV-25: set mode NTSC 480i 0
[ 4.125857] [drm] fb0: inteldrmfb frame buffer device
[ 4.160724] acpi device:3e: registered as cooling_device2
[ 4.161525] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:3c/input/input7
[ 4.161547] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
[ 4.161587] ACPI Warning: \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) 20090521 nspredef-434
[ 4.161638] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:43/input/input8
[ 4.161655] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[ 4.161668] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.228287] [drm] LVDS-8: set mode 1440x900 c
[ 4.551035] Console: switching to colour frame buffer device 180x56
[ 4.690302] ieee1394: Host added: ID:BUS[0-00:1023] GUID[434fc0003d0b2490]
[ 4.710646] PM: Starting manual resume from disk
[ 4.710649] PM: Resume from partition 8:5
[ 4.710651] PM: Checking hibernation image.
[ 4.710794] PM: Resume from disk failed.
[ 4.752428] kjournald starting. Commit interval 5 seconds
[ 4.752434] EXT3-fs: mounted filesystem with writeback data mode.
[ 5.510622] type=1505 audit(1259140981.900:2): operation="profile_load" pid=452 name=/usr/share/gdm/guest-session/Xsession
[ 5.529576] type=1505 audit(1259140981.920:3): operation="profile_load" pid=453 name=/sbin/dhclient3
[ 5.530163] type=1505 audit(1259140981.920:4): operation="profile_load" pid=453 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 5.530457] type=1505 audit(1259140981.920:5): operation="profile_load" pid=453 name=/usr/lib/connman/scripts/dhclient-script
[ 5.560962] type=1505 audit(1259140981.949:6): operation="profile_load" pid=454 name=/usr/bin/evince
[ 5.569283] type=1505 audit(1259140981.961:7): operation="profile_load" pid=454 name=/usr/bin/evince-previewer
[ 5.574212] type=1505 audit(1259140981.965:8): operation="profile_load" pid=454 name=/usr/bin/evince-thumbnailer
[ 5.594788] type=1505 audit(1259140981.985:9): operation="profile_load" pid=456 name=/usr/lib/cups/backend/cups-pdf
[ 5.595503] type=1505 audit(1259140981.985:10): operation="profile_load" pid=456 name=/usr/sbin/cupsd
[ 5.609116] type=1505 audit(1259140982.001:11): operation="profile_load" pid=457 name=/usr/sbin/tcpdump
[ 6.779087] Adding 3413772k swap on /dev/sda5. Priority:-1 extents:1 across:3413772k
[ 8.629488] udev: starting version 147
[ 9.416248] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 9.416250] ricoh-mmc: Copyright(c) Philip Langdale
[ 9.416275] ricoh-mmc: Ricoh MMC controller found at 0000:03:01.2 [1180:0843] (rev 11)
[ 9.416289] ricoh-mmc: Controller is now disabled.
[ 9.432785] sdhci: Secure Digital Host Controller Interface driver
[ 9.432787] sdhci: Copyright(c) Pierre Ossman
[ 9.433761] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 21)
[ 9.433776] sdhci-pci 0000:03:01.1: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 9.435817] Registered led device: mmc0::
[ 9.436837] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA
[ 9.447168] usb 3-1.3: new full speed USB device using uhci_hcd and address 5
[ 9.501916] lib80211: common routines for IEEE802.11 drivers
[ 9.501918] lib80211_crypt: registered algorithm 'NULL'
[ 9.503571] wl: module license 'MIXED/Proprietary' taints kernel.
[ 9.503573] Disabling lock debugging due to kernel taint
[ 9.505165] wl 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 9.505174] wl 0000:0c:00.0: setting latency timer to 64
[ 9.570963] lib80211_crypt: registered algorithm 'TKIP'
[ 9.572200] eth1: Broadcom BCM432b 802.11 Wireless Controller 5.10.91.9
[ 9.576716] lp: driver loaded but no devices found
[ 9.591365] usb 3-1.3: configuration #1 chosen from 1 choice
[ 9.653684] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 9.855648] Bluetooth: Generic Bluetooth USB driver ver 0.5
[ 9.855736] usbcore: registered new interface driver btusb
[ 10.108869] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 10.108890] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 10.161520] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.162080] input: Dell WMI hotkeys as /devices/virtual/input/input9
[ 10.179516] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 10.258132] input: HDA Intel Mic at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 10.258180] input: HDA Intel Mic at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 10.258223] input: HDA Intel Line Out at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 10.258264] input: HDA Intel HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 10.279351] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input15
[ 10.296335] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input16
[ 10.706467] EXT3 FS on sda4, internal journal
[ 85.524062] usb 6-2: new low speed USB device using uhci_hcd and address 2
[ 85.699192] usb 6-2: configuration #1 chosen from 1 choice
[ 85.715325] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input17
[ 85.715379] generic-usb 0003:413C:3012.0003: input,hidraw1: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1d.0-2/input0
[ 151.729407] kjournald starting. Commit interval 5 seconds
[ 151.749263] EXT3 FS on sda6, internal journal
[ 151.749267] EXT3-fs: mounted filesystem with writeback data mode.
[ 152.700267] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[ 152.760059] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[ 152.760276] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 152.762601] type=1505 audit(1259137529.153:12): operation="profile_replace" pid=1002 name=/usr/share/gdm/guest-session/Xsession
[ 152.763810] type=1505 audit(1259137529.153:13): operation="profile_replace" pid=1003 name=/sbin/dhclient3
[ 152.764352] type=1505 audit(1259137529.153:14): operation="profile_replace" pid=1003 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 152.764650] type=1505 audit(1259137529.153:15): operation="profile_replace" pid=1003 name=/usr/lib/connman/scripts/dhclient-script
[ 152.767390] type=1505 audit(1259137529.157:16): operation="profile_replace" pid=1004 name=/usr/bin/evince
[ 152.776057] type=1505 audit(1259137529.165:17): operation="profile_replace" pid=1004 name=/usr/bin/evince-previewer
[ 152.781472] type=1505 audit(1259137529.173:18): operation="profile_replace" pid=1004 name=/usr/bin/evince-thumbnailer
[ 152.788720] type=1505 audit(1259137529.177:19): operation="profile_replace" pid=1006 name=/usr/lib/cups/backend/cups-pdf
[ 152.789379] type=1505 audit(1259137529.181:20): operation="profile_replace" pid=1006 name=/usr/sbin/cupsd
[ 152.791903] type=1505 audit(1259137529.181:21): operation="profile_replace" pid=1007 name=/usr/sbin/tcpdump
[ 154.281453] ppdev: user-space parallel port driver
[ 154.536729] i2c-adapter i2c-2: unable to read EDID block.
[ 154.536732] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 154.541316] i2c-adapter i2c-2: unable to read EDID block.
[ 154.541318] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 154.545913] i2c-adapter i2c-4: unable to read EDID block.
[ 154.545915] i915 0000:00:02.0: HDMI Type A-2: no EDID data
[ 154.550487] i2c-adapter i2c-4: unable to read EDID block.
[ 154.550489] i915 0000:00:02.0: HDMI Type A-2: no EDID data
[ 154.596137] [drm] TV-25: set mode NTSC 480i 0
[ 154.736891] [drm] TV-25: set mode NTSC 480i 0
[ 154.980321] i2c-adapter i2c-2: unable to read EDID block.
[ 154.980324] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 154.984719] i2c-adapter i2c-2: unable to read EDID block.
[ 154.984721] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 154.989454] i2c-adapter i2c-4: unable to read EDID block.
[ 154.989456] i915 0000:00:02.0: HDMI Type A-2: no EDID data
[ 154.994029] i2c-adapter i2c-4: unable to read EDID block.
[ 154.994031] i915 0000:00:02.0: HDMI Type A-2: no EDID data
[ 155.039655] [drm] TV-25: set mode NTSC 480i 0
[ 155.179888] [drm] TV-25: set mode NTSC 480i 0
[ 155.596797] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 155.596962] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 157.607653] i2c-adapter i2c-2: unable to read EDID block.
[ 157.607657] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 157.612548] i2c-adapter i2c-2: unable to read EDID block.
[ 157.612551] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 157.616986] i2c-adapter i2c-4: unable to read EDID block.
[ 157.616988] i915 0000:00:02.0: HDMI Type A-2: no EDID data
[ 157.621389] i2c-adapter i2c-4: unable to read EDID block.
[ 157.621391] i915 0000:00:02.0: HDMI Type A-2: no EDID data
[ 157.667041] [drm] TV-25: set mode NTSC 480i 0
[ 157.807140] [drm] TV-25: set mode NTSC 480i 0
[ 158.036120] i2c-adapter i2c-2: unable to read EDID block.
[ 158.036123] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 158.040756] i2c-adapter i2c-2: unable to read EDID block.
[ 158.040758] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 158.045637] i2c-adapter i2c-4: unable to read EDID block.
[ 158.045640] i915 0000:00:02.0: HDMI Type A-2: no EDID data
[ 158.050263] i2c-adapter i2c-4: unable to read EDID block.
[ 158.050265] i915 0000:00:02.0: HDMI Type A-2: no EDID data
[ 158.095900] [drm] TV-25: set mode NTSC 480i 0
[ 158.236489] [drm] TV-25: set mode NTSC 480i 0
[ 158.418031] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 158.418033] Bluetooth: BNEP filters: protocol multicast
[ 158.422578] Bridge firewalling registered
[ 158.527065] i2c-adapter i2c-2: unable to read EDID block.
[ 158.527068] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 158.531727] i2c-adapter i2c-2: unable to read EDID block.
[ 158.531729] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 158.536422] i2c-adapter i2c-4: unable to read EDID block.
[ 158.536425] i915 0000:00:02.0: HDMI Type A-2: no EDID data
[ 158.540831] i2c-adapter i2c-4: unable to read EDID block.
[ 158.540833] i915 0000:00:02.0: HDMI Type A-2: no EDID data
[ 158.586472] [drm] TV-25: set mode NTSC 480i 0
[ 158.728041] [drm] TV-25: set mode NTSC 480i 0
[ 163.252038] eth1: no IPv6 routers present
[ 166.336048] eth0: no IPv6 routers present
[ 760.021501] dell-wmi: Unknown key ffd0 pressed
[ 1122.470552] dell-wmi: Unknown key ffd1 pressed
[ 1257.953322] i2c-adapter i2c-2: unable to read EDID block.
[ 1257.953326] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 1257.957993] i2c-adapter i2c-2: unable to read EDID block.
[ 1257.957995] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 1257.962639] i2c-adapter i2c-4: unable to read EDID block.
[ 1257.962641] i915 0000:00:02.0: HDMI Type A-2: no EDID data
[ 1257.967261] i2c-adapter i2c-4: unable to read EDID block.
[ 1257.967263] i915 0000:00:02.0: HDMI Type A-2: no EDID data
[ 1258.012893] [drm] TV-25: set mode NTSC 480i 0
[ 1258.153697] [drm] TV-25: set mode NTSC 480i 0
[ 1258.379366] i2c-adapter i2c-2: unable to read EDID block.
[ 1258.379369] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 1258.384386] i2c-adapter i2c-2: unable to read EDID block.
[ 1258.384388] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 1258.389028] i2c-adapter i2c-4: unable to read EDID block.
[ 1258.389030] i915 0000:00:02.0: HDMI Type A-2: no EDID data
[ 1258.393420] i2c-adapter i2c-4: unable to read EDID block.
[ 1258.393422] i915 0000:00:02.0: HDMI Type A-2: no EDID data
[ 1258.439040] [drm] TV-25: set mode NTSC 480i 0
[ 1258.579630] [drm] TV-25: set mode NTSC 480i 0
[ 1258.814295] i2c-adapter i2c-2: unable to read EDID block.
[ 1258.814297] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 1258.818924] i2c-adapter i2c-2: unable to read EDID block.
[ 1258.818926] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 1258.823571] i2c-adapter i2c-4: unable to read EDID block.
[ 1258.823573] i915 0000:00:02.0: HDMI Type A-2: no EDID data
[ 1258.828201] i2c-adapter i2c-4: unable to read EDID block.
[ 1258.828203] i915 0000:00:02.0: HDMI Type A-2: no EDID data
[ 1258.873888] [drm] TV-25: set mode NTSC 480i 0
[ 1259.014599] [drm] TV-25: set mode NTSC 480i 0
[ 1278.360338] usb 3-1: USB disconnect, address 2
[ 1278.360347] usb 3-1.1: USB disconnect, address 3
[ 1278.360438] btusb_bulk_complete: hci0 urb f6aa4680 failed to resubmit (19)
[ 1278.361420] btusb_bulk_complete: hci0 urb f6aa4600 failed to resubmit (19)
[ 1278.362437] btusb_intr_complete: hci0 urb f6aa4580 failed to resubmit (19)
[ 1278.381908] usb 3-1.2: USB disconnect, address 4
[ 1278.382255] usb 3-1.3: USB disconnect, address 5
[ 1278.382443] btusb_send_frame: hci0 urb f008ec80 submission failed
[ 1738.687129] BUG: scheduling while atomic: swapper/0/0x10010000
[ 1738.687139] Modules linked in: binfmt_misc bridge stp bnep ppdev parport_pc joydev snd_hda_codec_intelhdmi iptable_filter snd_hda_codec_idt dell_wmi ip_tables x_tables snd_hda_intel dell_laptop snd_hda_codec snd_hwdep snd_pcm_oss btusb uinput snd_mixer_oss dcdbas snd_pcm psmouse serio_raw snd_seq_dummy snd_seq_oss lp lib80211_crypt_tkip parport wl(P) lib80211 snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device sdhci_pci sdhci led_class snd soundcore snd_page_alloc ricoh_mmc fbcon tileblit font bitblit softcursor i915 drm i2c_algo_bit usbhid ohci1394 ieee1394 e1000e intel_agp agpgart video output
[ 1738.687264]
[ 1738.687273] Pid: 0, comm: swapper Tainted: P (2.6.31-15-generic #50-Ubuntu) Latitude E6400
[ 1738.687281] EIP: 0060:[<c0369e94>] EFLAGS: 00000202 CPU: 1
[ 1738.687292] EIP is at acpi_idle_enter_bm+0x255/0x286
[ 1738.687298] EAX: c080fe04 EBX: 0000477e ECX: ffc2f606 EDX: 023bc000
[ 1738.687304] ESI: 00000000 EDI: f7210cc0 EBP: f707df70 ESP: f707df48
[ 1738.687310] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 1738.687317] CR0: 8005003b CR2: b741e000 CR3: 0081a000 CR4: 000406d0
[ 1738.687323] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[ 1738.687328] DR6: ffff0ff0 DR7: 00000400
[ 1738.687332] Call Trace:
[ 1738.687348] [<c04688c6>] cpuidle_idle_call+0x76/0xd0
[ 1738.687356] [<c010202c>] cpu_idle+0x8c/0xd0
[ 1738.687367] [<c056c686>] start_secondary+0xc6/0xc8
[ 1738.692822] BUG: scheduling while atomic: swapper/0/0x10010000
[ 1738.692822] Modules linked in: binfmt_misc bridge stp bnep ppdev parport_pc joydev snd_hda_codec_intelhdmi iptable_filter snd_hda_codec_idt dell_wmi ip_tables x_tables snd_hda_intel dell_laptop snd_hda_codec snd_hwdep snd_pcm_oss btusb uinput snd_mixer_oss dcdbas snd_pcm psmouse serio_raw snd_seq_dummy snd_seq_oss lp lib80211_crypt_tkip parport wl(P) lib80211 snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device sdhci_pci sdhci led_class snd soundcore snd_page_alloc ricoh_mmc fbcon tileblit font bitblit softcursor i915 drm i2c_algo_bit usbhid ohci1394 ieee1394 e1000e intel_agp agpgart video output
[ 1738.692822]
[ 1738.692822] Pid: 0, comm: swapper Tainted: P (2.6.31-15-generic #50-Ubuntu) Latitude E6400
[ 1738.692822] EIP: 0060:[<c0369e94>] EFLAGS: 00000202 CPU: 1
[ 1738.692822] EIP is at acpi_idle_enter_bm+0x255/0x286
[ 1738.692822] EAX: c080fe04 EBX: 0000477e ECX: ffc2f606 EDX: 023bc000
[ 1738.692822] ESI: 00000000 EDI: f7210cc0 EBP: f707df70 ESP: f707df48
[ 1738.692822] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 1738.692822] CR0: 8005003b CR2: b755fb6c CR3: 36537000 CR4: 000406d0
[ 1738.692822] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[ 1738.692822] DR6: ffff0ff0 DR7: 00000400
[ 1738.692822] Call Trace:
[ 1738.692822] [<c04688c6>] cpuidle_idle_call+0x76/0xd0
[ 1738.692822] [<c010202c>] cpu_idle+0x8c/0xd0
[ 1738.692822] [<c056c686>] start_secondary+0xc6/0xc8
[ 1739.208300] usb 3-1: new full speed USB device using uhci_hcd and address 6
[ 1739.380809] usb 3-1: configuration #1 chosen from 1 choice
[ 1739.382523] hub 3-1:1.0: USB hub found
[ 1739.387290] hub 3-1:1.0: 3 ports detected
[ 1739.665616] usb 3-1.1: new full speed USB device using uhci_hcd and address 7
[ 1739.784824] usb 3-1.1: configuration #1 chosen from 1 choice
[ 1739.794113] input: HID 413c:8157 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input18
[ 1739.794269] generic-usb 0003:413C:8157.0004: input,hidraw0: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:1a.0-1.1/input0
[ 1739.874409] usb 3-1.2: new full speed USB device using uhci_hcd and address 8
[ 1739.999806] usb 3-1.2: configuration #1 chosen from 1 choice
[ 1740.013587] input: HID 413c:8158 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input19
[ 1740.013790] generic-usb 0003:413C:8158.0005: input,hidraw2: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:1a.0-1.2/input0
[ 1740.369421] usb 3-1.3: new full speed USB device using uhci_hcd and address 9
[ 1740.496838] usb 3-1.3: configuration #1 chosen from 1 choice
[ 1748.749223] eth1: no IPv6 routers present
[ 3421.669731] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 6135.936329] usb 6-2: USB disconnect, address 2
[ 6136.672288] usb 6-2: new low speed USB device using uhci_hcd and address 3
[ 6136.844297] usb 6-2: configuration #1 chosen from 1 choice
[ 6136.860908] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input20
[ 6136.861113] generic-usb 0003:413C:3012.0006: input,hidraw1: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1d.0-2/input0
[ 6260.557152] CE: hpet increasing min_delta_ns to 15000 nsec
[17128.424976] dell-wmi: Unknown key ffd0 pressed
[17699.723953] dell-wmi: Unknown key ffd1 pressed
[17977.696093] CE: hpet increasing min_delta_ns to 22500 nsec
[20270.824715] CE: hpet increasing min_delta_ns to 33750 nsec
[21772.261069] hda-intel: azx_get_response timeout, switching to
polling mode: last cmd=0x01ff0c00

-- 
Firefox 3.5 and above crash on full screen flash video
https://bugs.launchpad.net/bugs/333127
You received this bug notification because you are a member of Mozilla
Bugs, which is subscribed to flashplugin-nonfree in ubuntu.