[Bug 86045] Re: sound not working
Markku
mleitso at gmail.com
Sun Feb 18 21:59:32 UTC 2007
Sorry....
Herewith the information required:-
uname -a=
2.6.20-8-generic #2 SMP Tue Feb 13 05:18:42 UTC 2007 i686 GNU/Linux
dmesg=
[ 0.000000] Linux version 2.6.20-8-generic (root at vernadsky) (gcc version
4.1.2 20070129 (prerelease) (Ubuntu 4.1.1-31ubuntu2)) #2 SMP Tue Feb 13
05:18:42 UTC 2007 (Ubuntu 2.6.20-8.14-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size:
000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size:
0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e0000 size:
0000000000020000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size:
000000002bed0000 end: 000000002bfd0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000002bfd0000 size:
000000000000f000 end: 000000002bfdf000 type: 3
[ 0.000000] copy_e820_map() start: 000000002bfdf000 size:
0000000000021000 end: 000000002c000000 type: 4
[ 0.000000] copy_e820_map() start: 00000000fff80000 size:
0000000000080000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000002bfd0000 (usable)
[ 0.000000] BIOS-e820: 000000002bfd0000 - 000000002bfdf000 (ACPI data)
[ 0.000000] BIOS-e820: 000000002bfdf000 - 000000002c000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 703MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 180176) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 180176
[ 0.000000] HighMem 180176 -> 180176
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 180176
[ 0.000000] On node 0 totalpages: 180176
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1375 pages used for memmap
[ 0.000000] Normal zone: 174705 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 ACPIAM ) @
0x000f66d0
[ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x12000407 MSFT 0x00000097)
@ 0x2bfd0000
[ 0.000000] ACPI: FADT (v002 A M I OEMFACP 0x12000407 MSFT 0x00000097)
@ 0x2bfd0200
[ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x12000407 MSFT 0x00000097)
@ 0x2bfd0390
[ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x12000407 MSFT 0x00000097)
@ 0x2bfdf040
[ 0.000000] ACPI: DSDT (v001 1ABVS 1ABVS001 0x00000001 INTL 0x02002026)
@ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:9 APIC version 20
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap:
2c000000:d3f80000)
[ 0.000000] Detected 1500.088 MHz processor.
[ 22.033631] Built 1 zonelists. Total pages: 178769
[ 22.033637] Kernel command line:
root=UUID=84b582da-0508-4609-8c5a-c63225a7b3ac ro quiet splash
[ 22.033838] mapped APIC to ffffd000 (fee00000)
[ 22.033842] mapped IOAPIC to ffffc000 (fec00000)
[ 22.033847] Enabling fast FPU save and restore... done.
[ 22.033850] Enabling unmasked SIMD FPU exception support... done.
[ 22.033863] Initializing CPU#0
[ 22.033939] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 22.035181] Console: colour VGA+ 80x25
[ 22.036025] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 22.037080] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 22.060080] Memory: 703580k/720704k available (1979k kernel code, 16532k
reserved, 882k data, 324k init, 0k highmem)
[ 22.060093] virtual kernel memory layout:
[ 22.060094] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 22.060096] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 22.060097] vmalloc : 0xec800000 - 0xff7fe000 ( 303 MB)
[ 22.060099] lowmem : 0xc0000000 - 0xebfd0000 ( 703 MB)
[ 22.060100] .init : 0xc03d1000 - 0xc0422000 ( 324 kB)
[ 22.060102] .data : 0xc02eecb4 - 0xc03cb6d4 ( 882 kB)
[ 22.060103] .text : 0xc0100000 - 0xc02eecb4 (1979 kB)
[ 22.060108] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[ 22.137851] Calibrating delay using timer specific routine..
3002.17BogoMIPS (lpj=6004352)
[ 22.137906] Security Framework v1.0.0 initialized
[ 22.137915] SELinux: Disabled at boot.
[ 22.137937] Mount-cache hash table entries: 512
[ 22.138106] CPU: After generic identify, caps: a7e9fbbf 00000000 00000000
00000000 00000000 00000000 00000000
[ 22.138120] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 22.138123] CPU: L2 cache: 512K
[ 22.138127] CPU: After all inits, caps: a7e9fbbf 00000000 00000000
00002040 00000000 00000000 00000000
[ 22.138149] Checking 'hlt' instruction... OK.
[ 22.149933] SMP alternatives: switching to UP code
[ 22.150113] Freeing SMP alternatives: 11k freed
[ 22.150198] ACPI: Core revision 20060707
[ 22.156818] CPU0: Intel(R) Celeron(R) M processor 1500MHz
stepping 05
[ 22.156849] Total of 1 processors activated (3002.17 BogoMIPS).
[ 22.156965] ENABLING IO-APIC IRQs
[ 22.157156] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 22.301758] Brought up 1 CPUs
[ 22.302052] Booting paravirtualized kernel on bare hardware
[ 22.302139] Time: 18:05:25 Date: 01/18/107
[ 22.302178] NET: Registered protocol family 16
[ 22.302297] EISA bus registered
[ 22.302303] ACPI: bus type pci registered
[ 22.303613] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[ 22.303616] PCI: Using configuration type 1
[ 22.303618] Setting up standard PCI resources
[ 22.317487] ACPI: Interpreter enabled
[ 22.317492] ACPI: Using IOAPIC for interrupt routing
[ 22.318070] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 22.318077] PCI: Probing PCI hardware (bus 00)
[ 22.318457] Uncovering SIS963 that hid as a SIS503 (compatible=0)
[ 22.318462] Enabling SiS 96x SMBus.
[ 22.319064] Boot video device is 0000:01:00.0
[ 22.319119] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 22.340264] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14
15)
[ 22.340521] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 12 14
15)
[ 22.340776] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14
15)
[ 22.341027] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15)
*0, disabled.
[ 22.341341] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 7 10 11 12 14
15)
[ 22.341597] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 7 10 11 12 14
15)
[ 22.341863] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15)
*0, disabled.
[ 22.342116] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14
15)
[ 22.342212] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 22.342226] pnp: PnP ACPI init
[ 22.350493] pnp: PnP ACPI: found 11 devices
[ 22.350499] PnPBIOS: Disabled by ACPI PNP
[ 22.350566] PCI: Using ACPI for IRQ routing
[ 22.350570] PCI: If a device doesn't work, try "pci=routeirq". If it
helps, post a report
[ 22.354997] PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
[ 22.355000] PCI: Bridge: 0000:00:01.0
[ 22.355004] IO window: c000-cfff
[ 22.355011] MEM window: dfe00000-dfefffff
[ 22.355017] PREFETCH window: cfd00000-dfcfffff
[ 22.355067] NET: Registered protocol family 2
[ 22.393721] IP route cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 22.393920] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 22.395783] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 22.396736] TCP: Hash tables configured (established 131072 bind 65536)
[ 22.396742] TCP reno registered
[ 22.405836] checking if image is initramfs... it is
[ 23.125033] Freeing initrd memory: 6439k freed
[ 23.125553] audit: initializing netlink socket (disabled)
[ 23.125572] audit(1171821925.172:1): initialized
[ 23.125738] VFS: Disk quotas dquot_6.5.1
[ 23.125766] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 23.125831] io scheduler noop registered
[ 23.125836] io scheduler anticipatory registered
[ 23.125839] io scheduler deadline registered
[ 23.125853] io scheduler cfq registered (default)
[ 23.193137] isapnp: Scanning for PnP cards...
[ 23.546684] isapnp: No Plug & Play device found
[ 23.600848] Real Time Clock Driver v1.12ac
[ 23.600907] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[ 23.602159] ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) ->
IRQ 16
[ 23.602170] ACPI: PCI interrupt for device 0000:00:02.6 disabled
[ 23.602255] mice: PS/2 mouse device common for all mice
[ 23.602880] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 23.603129] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 23.603135] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 23.603418] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64
irq 1,12
[ 23.611149] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 23.614931] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 23.614937] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 23.614940] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 23.614943] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 23.614946] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 23.615245] EISA: Probing bus 0 at eisa.0
[ 23.615285] EISA: Detected 0 cards.
[ 23.645372] TCP cubic registered
[ 23.645385] NET: Registered protocol family 1
[ 23.645393] NET: Registered protocol family 8
[ 23.645395] NET: Registered protocol family 20
[ 23.645445] Using IPI No-Shortcut mode
[ 23.645520] ACPI: (supports S0 S1 S3 S4 S5)
[ 23.645575] Magic number: 11:748:89
[ 23.646044] Freeing unused kernel memory: 324k freed
[ 23.648517] Time: tsc clocksource has been installed.
[ 23.649787] input: AT Translated Set 2 keyboard as /class/input/input0
[ 24.911254] Capability LSM initialized
[ 24.972469] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 25.652466] SIS5513: IDE controller at PCI slot 0000:00:02.5
[ 25.652488] SIS5513: chipset revision 0
[ 25.652491] SIS5513: not 100% native mode: will probe irqs later
[ 25.652505] SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
[ 25.652521] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA,
hdb:DMA
[ 25.652536] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA,
hdd:DMA
[ 25.652546] Probing IDE interface ide0...
[ 25.704504] usbcore: registered new interface driver usbfs
[ 25.704539] usbcore: registered new interface driver hub
[ 25.704565] usbcore: registered new device driver usb
[ 25.706036] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller
(OHCI) Driver
[ 25.788913] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 26.002446] hda: HITACHI_DK23FB-40, ATA DISK drive
[ 26.677725] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 26.677986] Probing IDE interface ide1...
[ 27.417118] hdc: TSSTcorpCD/DVDW TS-L532A, ATAPI CD/DVD-ROM drive
[ 28.129137] ide1 at 0x170-0x177,0x376 on irq 15
[ 28.143817] SCSI subsystem initialized
[ 28.154754] libata version 2.00 loaded.
[ 28.158329] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) ->
IRQ 17
[ 28.158349] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 28.158738] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus
number 1
[ 28.158763] ohci_hcd 0000:00:03.0: irq 17, io mem 0xdfffd000
[ 28.168863] hda: max request size: 128KiB
[ 28.181096] hda: 78140160 sectors (40007 MB) w/8192KiB Cache,
CHS=65535/16/63, UDMA(33)
[ 28.181294] hda: cache flushes supported
[ 28.181359] hda: hda1 hda2 <<6>usb usb1: configuration #1 chosen from 1
choice
[ 28.218358] hub 1-0:1.0: USB hub found
[ 28.218370] hub 1-0:1.0: 3 ports detected
[ 28.228124] hda5 >
[ 28.248903] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache,
UDMA(33)
[ 28.248915] Uniform CD-ROM driver Revision: 3.20
[ 28.324282] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) ->
IRQ 18
[ 28.324303] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 28.324335] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus
number 2
[ 28.324355] ohci_hcd 0000:00:03.1: irq 18, io mem 0xdfffe000
[ 28.382165] usb usb2: configuration #1 chosen from 1 choice
[ 28.382201] hub 2-0:1.0: USB hub found
[ 28.382213] hub 2-0:1.0: 3 ports detected
[ 28.416878] Attempting manual resume
[ 28.416884] swsusp: Resume From Partition 3:5
[ 28.416886] PM: Checking swsusp image.
[ 28.417185] PM: Resume from disk failed.
[ 28.471767] kjournald starting. Commit interval 5 seconds
[ 28.471782] EXT3-fs: mounted filesystem with ordered data mode.
[ 28.488265] 8139cp 0000:00:07.0: This (id 10ec:8139 rev 10) is not an
8139C+ compatible chip
[ 28.488271] 8139cp 0000:00:07.0: Try the "8139too" driver instead.
[ 28.491028] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) ->
IRQ 19
[ 28.491045] ehci_hcd 0000:00:03.3: EHCI Host Controller
[ 28.491079] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus
number 3
[ 28.491131] ehci_hcd 0000:00:03.3: irq 19, io mem 0xdffff000
[ 28.491141] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10
Dec 2004
[ 28.491245] usb usb3: configuration #1 chosen from 1 choice
[ 28.491276] hub 3-0:1.0: USB hub found
[ 28.491283] hub 3-0:1.0: 6 ports detected
[ 28.491389] 8139too Fast Ethernet driver 0.9.28
[ 28.596169] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 17 (level, low) ->
IRQ 20
[ 28.596521] eth0: RealTek RTL8139 at 0xec848c00, 00:11:5b:a1:03:ac, IRQ
20
[ 28.596524] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 29.135320] usb 2-2: new low speed USB device using ohci_hcd and address
2
[ 29.339158] usb 2-2: configuration #1 chosen from 1 choice
[ 37.565690] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 38.823012] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 38.826828] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 38.879975] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
[ 39.172044] NET: Registered protocol family 17
[ 39.215073] Linux agpgart interface v0.101 (c) Dave Jones
[ 39.244392] agpgart: Detected SiS 661 chipset
[ 39.249310] agpgart: AGP aperture is 64M @ 0xe0000000
[ 39.484302] input: PC Speaker as /class/input/input1
[ 39.905627] parport: PnPBIOS parport detected.
[ 39.905676] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 40.014516] usbcore: registered new interface driver hiddev
[ 40.154020] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x1d6eb1, caps:
0xa04713/0x4006
[ 40.199815] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[ 40.214586] input: PS/2+USB Mouse as /class/input/input3
[ 40.214884] input: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:
03.1-2
[ 40.214904] usbcore: registered new interface driver usbhid
[ 40.214909] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 40.533644] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) ->
IRQ 16
[ 41.359852] intel8x0_measure_ac97_clock: measured 55519 usecs
[ 41.359856] intel8x0: clocking to 48000
[ 41.515237] fuse init (API version 7.8)
[ 41.549086] lp0: using parport0 (interrupt-driven).
[ 41.582209] Adding 1646620k swap on
/dev/disk/by-uuid/0f83b10b-a3b4-47f7-8022-d2e24cb4cc3d. Priority:-1
extents:1 across:1646620k
[ 41.763652] EXT3 FS on hda1, internal journal
[ 43.612458] NET: Registered protocol family 10
[ 43.612584] lo: Disabled Privacy Extensions
[ 47.598519] ibm_acpi: ec object not found
[ 47.669843] No dock devices found.
[ 47.835400] input: Power Button (FF) as /class/input/input4
[ 47.851671] ACPI: Power Button (FF) [PWRF]
[ 47.902978] input: Lid Switch as /class/input/input5
[ 47.919202] ACPI: Lid Switch [LID0]
[ 47.970592] input: Power Button (CM) as /class/input/input6
[ 47.986818] ACPI: Power Button (CM) [PWRB]
[ 48.004278] Using specific hotkey driver
[ 48.039779] ACPI: AC Adapter [AC] (on-line)
[ 48.269620] ACPI: Battery Slot [BAT0] (battery present)
[ 50.784764] ppdev: user-space parallel port driver
[ 54.475553] eth0: no IPv6 routers present
[ 58.762878] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 58.762885] apm: overridden by ACPI.
[ 63.779142] Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
[ 63.932112] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state
recovery directory
[ 63.956935] NFSD: starting 90-second grace period
[ 65.226211] Bluetooth: Core ver 2.11
[ 65.226295] NET: Registered protocol family 31
[ 65.226298] Bluetooth: HCI device and connection manager initialized
[ 65.226302] Bluetooth: HCI socket layer initialized
[ 65.276033] Bluetooth: L2CAP ver 2.8
[ 65.276039] Bluetooth: L2CAP socket layer initialized
[ 65.440461] Bluetooth: RFCOMM socket layer initialized
[ 65.440478] Bluetooth: RFCOMM TTY layer initialized
[ 65.440480] Bluetooth: RFCOMM ver 1.8
[ 79.516078] eth0: no IPv6 routers present
lspci-vvnn.log:-
00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS]
661FX/M661FX/M661MX Host [1039:0661] (rev 11)
Subsystem: Elitegroup Computer Systems Unknown device [1019:0f52]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] SiS AGP Port
(virtual PCI-to-PCI bridge) [1039:0003] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: dfe00000-dfefffff
Prefetchable memory behind bridge: cfd00000-dfcfffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS963 [MuTIOL
Media IO] [1039:0963] (rev 25)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:02.1 SMBus [0c05]: Silicon Integrated Systems [SiS] SiS961/2 SMBus
Controller [1039:0016]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 0
Region 4: I/O ports at 0c00 [size=32]
00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 [IDE]
[1039:5513] (prog-if 80 [Master])
Subsystem: Elitegroup Computer Systems Unknown device [1019:0f52]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 128
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[disabled] [size=1]
Region 4: I/O ports at ffa0 [size=16]
00:02.6 Modem [0703]: Silicon Integrated Systems [SiS] AC'97 Modem
Controller [1039:7013] (rev a0) (prog-if 00 [Generic])
Subsystem: Elitegroup Computer Systems Unknown device [1019:df52]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 16
Region 0: I/O ports at e400 [size=256]
Region 1: I/O ports at e000 [size=128]
Capabilities: <access denied>
00:02.7 Multimedia audio controller [0401]: Silicon Integrated Systems [SiS]
AC'97 Sound Controller [1039:7012] (rev a0)
Subsystem: Elitegroup Computer Systems Unknown device [1019:0f52]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (13000ns min, 2750ns max)
Interrupt: pin C routed to IRQ 16
Region 0: I/O ports at e800 [size=256]
Region 1: I/O ports at ec00 [size=128]
Capabilities: <access denied>
00:03.0 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB
1.0Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems Unknown device [1019:0f52]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at dfffd000 (32-bit, non-prefetchable) [size=4K]
00:03.1 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB
1.0Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems Unknown device [1019:0f52]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max)
Interrupt: pin B routed to IRQ 18
Region 0: Memory at dfffe000 (32-bit, non-prefetchable) [size=4K]
00:03.3 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB
2.0Controller [1039:7002] (prog-if 20 [EHCI])
Subsystem: Elitegroup Computer Systems Unknown device [1019:0f52]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 19
Region 0: Memory at dffff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:07.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Elitegroup Computer Systems Unknown device [1019:b551]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at d800 [size=256]
Region 1: Memory at dfffcc00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
01:00.0 VGA compatible controller [0300]: Silicon Integrated Systems [SiS]
661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter [1039:6330]
(prog-if 00 [VGA])
Subsystem: Elitegroup Computer Systems Unknown device [1019:0f52]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
BIST result: 00
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at dfee0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at cc00 [size=128]
Capabilities: <access denied>
http://www.chouvigny.com
On 18/02/07, Cristian Aravena Romero <caravena at ubuntu-cl.org> wrote:
>
> Thanks for taking the time to report this bug. Unfortunately we can't
> fix it, because your description didn't include enough information.
>
> Please include the following additional information, if you have not
> already done so (please pay attention to lspci's additional options), as
> required by the Ubuntu Kernel Team:
> 1. Please include the output of the command "uname -a" in your next
> response. It should be one, long line of text which includes the exact
> kernel version you're running, as well as the CPU architecture.
> 2. Please run the command "dmesg > dmesg.log" and attach the resulting
> file "dmesg.log" to this bug report.
> 3. Please run the command "lspci -vvnn > lspci-vvnn.log" and attach the
> resulting file "lspci-vvnn.log" to this bug report.
>
> For your reference, the full description of procedures for kernel-
> related bug reports is available here:
> <http://wiki.ubuntu.com/DebuggingKernelProblems> Thanks!
>
> https://help.ubuntu.com/community/DebuggingSoundProblems
>
> --
> sound not working
> https://launchpad.net/bugs/86045
>
--
sound not working
https://launchpad.net/bugs/86045
More information about the Ubuntu-mozillateam-bugs
mailing list