[ubuntu-it] Lettore mp3 e Ubuntu

Ven 25 Apr 2008 13:11:57 BST

s a mba ha scritto:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Michele Scotti wrote:
>   
>> Salve a tutti...Avrei un quesito per voi..Il mio lettore Samsung 
>> YP-K5..non so come farlo comunicare con Ubuntu..lo collego tramite 
>> usb..ma non me lo rivela..che faccio!?
>>     
>
>
> $ lsusb
>
> dopo averlo inserito dai:
> $ dmesg | tail
>
>
> e dicci cosa ti dicono.
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.6 (GNU/Linux)
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
>
> iD8DBQFIEPpFlyacIe+v3xcRAkpKAJ4qQVBm7JdnNRY33/iIAVdBn8EOgQCgigNa
> jQSfAJ2bFJ7wlW6ikPMLzLg=
> =wUyo
> -----END PGP SIGNATURE-----
>
>   
Ecco...grazie tanto ragazzi!

michele a michele-desktop:~$ lsusb

Bus 003 Device 004: ID 05ac:120a Apple Computer, Inc. iPod Nano

Bus 003 Device 001: ID 0000:0000

Bus 002 Device 002: ID 05d8:4002 Ultima Electronics Corp. Artec Ultima 
2000 (GT6801 based)/Lifetec LT9385 Scanner

Bus 002 Device 001: ID 0000:0000

Bus 001 Device 003: ID 046d:0840 Logitech, Inc. QuickCam Express

Bus 001 Device 001: ID 0000:0000

michele a michele-desktop:~$ lsusb

Bus 003 Device 005: ID 04e8:505a Samsung Electronics Co., Ltd

Bus 003 Device 004: ID 05ac:120a Apple Computer, Inc. iPod Nano

Bus 003 Device 001: ID 0000:0000

Bus 002 Device 002: ID 05d8:4002 Ultima Electronics Corp. Artec Ultima 
2000 (GT6801 based)/Lifetec LT9385 Scanner

Bus 002 Device 001: ID 0000:0000

Bus 001 Device 003: ID 046d:0840 Logitech, Inc. QuickCam Express

Bus 001 Device 001: ID 0000:0000

michele a michele-desktop:~$ dmesg /tail

[ 0.000000] Linux version 2.6.24-16-generic (buildd a palmer) (gcc version 
4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 
(Ubuntu 2.6.24-16.30-generic)

[ 0.000000] BIOS-provided physical RAM map:

[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)

[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)

[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)

[ 0.000000] BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)

[ 0.000000] BIOS-e820: 000000002fff0000 - 000000002fff8000 (ACPI data)

[ 0.000000] BIOS-e820: 000000002fff8000 - 0000000030000000 (ACPI NVS)

[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)

[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)

[ 0.000000] BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)

[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)

[ 0.000000] 0MB HIGHMEM available.

[ 0.000000] 767MB LOWMEM available.

[ 0.000000] found SMP MP-table at 000fbc70

[ 0.000000] Entering add_active_range(0, 0, 196592) 0 entries of 256 used

[ 0.000000] Zone PFN ranges:

[ 0.000000] DMA 0 -> 4096

[ 0.000000] Normal 4096 -> 196592

[ 0.000000] HighMem 196592 -> 196592

[ 0.000000] Movable zone start PFN for each node

[ 0.000000] early_node_map[1] active PFN ranges

[ 0.000000] 0: 0 -> 196592

[ 0.000000] On node 0 totalpages: 196592

[ 0.000000] DMA zone: 32 pages used for memmap

[ 0.000000] DMA zone: 0 pages reserved

[ 0.000000] DMA zone: 4064 pages, LIFO batch:0

[ 0.000000] Normal zone: 1503 pages used for memmap

[ 0.000000] Normal zone: 190993 pages, LIFO batch:31

[ 0.000000] HighMem zone: 0 pages used for memmap

[ 0.000000] Movable zone: 0 pages used for memmap

[ 0.000000] DMI 2.3 present.

[ 0.000000] ACPI: RSDP signature @ 0xC00FAA40 checksum 0

[ 0.000000] ACPI: RSDP 000FAA40, 0014 (r0 AMI )

[ 0.000000] ACPI: RSDT 2FFF0000, 002C (r1 AMIINT SiS740XX 1000 MSFT 100000B)

[ 0.000000] ACPI: FACP 2FFF0030, 0081 (r1 AMIINT SiS740XX 11 MSFT 100000B)

[ 0.000000] ACPI: DSDT 2FFF0120, 3300 (r1 SiS 746 100 INTL 2002024)

[ 0.000000] ACPI: FACS 2FFF8000, 0040

[ 0.000000] ACPI: APIC 2FFF00C0, 005A (r1 AMIINT SiS740XX 1000 MSFT 100000B)

[ 0.000000] ACPI: PM-Timer IO Port: 0x808

[ 0.000000] ACPI: Local APIC address 0xfee00000

[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)

[ 0.000000] Processor #0 6:10 APIC version 16

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])

[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])

[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)

[ 0.000000] ACPI: IRQ0 used by override.

[ 0.000000] ACPI: IRQ2 used by override.

[ 0.000000] ACPI: IRQ9 used by override.

[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs

[ 0.000000] Using ACPI (MADT) for SMP configuration information

[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 
30000000:cec00000)

[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 
00000000000a0000

[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 
00000000000f0000

[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 
0000000000100000

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total 
pages: 195057

[ 0.000000] Kernel command line: 
root=UUID=6949a2a5-c7d0-47a3-b9b1-3cdd940186e8 ro quiet splash

[ 0.000000] mapped APIC to ffffb000 (fee00000)

[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)

[ 0.000000] Enabling fast FPU save and restore... done.

[ 0.000000] Enabling unmasked SIMD FPU exception support... done.

[ 0.000000] Initializing CPU#0

[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)

[ 0.000000] Detected 2180.766 MHz processor.

[ 20.062327] Console: colour VGA+ 80x25

[ 20.062331] console [tty0] enabled

[ 20.063194] Dentry cache hash table entries: 131072 (order: 7, 524288 
bytes)

[ 20.063841] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

[ 20.088604] Memory: 767012k/786368k available (2157k kernel code, 
18752k reserved, 998k data, 364k init, 0k highmem)

[ 20.088613] virtual kernel memory layout:

[ 20.088613] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)

[ 20.088615] pkmap : 0xff800000 - 0xffc00000 (4096 kB)

[ 20.088616] vmalloc : 0xf0800000 - 0xff7fe000 ( 239 MB)

[ 20.088617] lowmem : 0xc0000000 - 0xefff0000 ( 767 MB)

[ 20.088618] .init : 0xc041b000 - 0xc0476000 ( 364 kB)

[ 20.088619] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB)

[ 20.088620] .text : 0xc0100000 - 0xc031b5a4 (2157 kB)

[ 20.088623] Checking if this processor honours the WP bit even in 
supervisor mode... Ok.

[ 20.088673] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, 
CPUs=1, Nodes=1

[ 20.168599] Calibrating delay using timer specific routine.. 4363.94 
BogoMIPS (lpj=8727889)

[ 20.168637] Security Framework initialized

[ 20.168645] SELinux: Disabled at boot.

[ 20.168668] AppArmor: AppArmor initialized

[ 20.168673] Failure registering capabilities with primary security module.

[ 20.168683] Mount-cache hash table entries: 512

[ 20.168839] CPU: After generic identify, caps: 0383fbff c1c3fbff 
00000000 00000000 00000000 00000000 00000000 00000000

[ 20.168849] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 
bytes/line)

[ 20.168852] CPU: L2 Cache: 512K (64 bytes/line)

[ 20.168855] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 
00000420 00000000 00000000 00000000 00000000

[ 20.168866] Compat vDSO mapped to ffffe000.

[ 20.168880] Checking 'hlt' instruction... OK.

[ 20.184829] SMP alternatives: switching to UP code

[ 20.185927] Freeing SMP alternatives: 11k freed

[ 20.186063] Early unpacking initramfs... done

[ 20.518866] ACPI: Core revision 20070126

[ 20.518974] ACPI: Looking for DSDT in initramfs... error, file 
/DSDT.aml not found.

[ 20.520376] CPU0: AMD Athlon(tm) XP 3000+ stepping 00

[ 20.520401] Total of 1 processors activated (4363.94 BogoMIPS).

[ 20.520523] ENABLING IO-APIC IRQs

[ 20.520699] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1

[ 20.668090] Brought up 1 CPUs

[ 20.668126] CPU0 attaching sched-domain:

[ 20.668130] domain 0: span 01

[ 20.668131] groups: 01

[ 20.668359] net_namespace: 64 bytes

[ 20.668369] Booting paravirtualized kernel on bare hardware

[ 20.668839] Time: 12:19:02 Date: 04/25/08

[ 20.668879] NET: Registered protocol family 16

[ 20.669119] EISA bus registered

[ 20.669141] ACPI: bus type pci registered

[ 20.670493] PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=2

[ 20.670496] PCI: Using configuration type 1

[ 20.670497] Setting up standard PCI resources

[ 20.672421] ACPI: EC: Look up EC in DSDT

[ 20.675055] ACPI: Interpreter enabled

[ 20.675059] ACPI: (supports S0 S1 S4 S5)

[ 20.675071] ACPI: Using IOAPIC for interrupt routing

[ 20.678731] ACPI: PCI Root Bridge [PCI0] (0000:00)

[ 20.678920] Enabling SiS 96x SMBus.

[ 20.679657] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

[ 20.688235] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 
14 15)

[ 20.688317] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 
14 15)

[ 20.688397] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 
14 15)

[ 20.688474] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 
14 15)

[ 20.688549] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 
14 15)

[ 20.688628] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 
14 15)

[ 20.688707] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 
15) *0, disabled.

[ 20.688784] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 
14 15)

[ 20.688876] ACPI: Power Resource [URP1] (off)

[ 20.688899] ACPI: Power Resource [URP2] (off)

[ 20.688920] ACPI: Power Resource [FDDP] (off)

[ 20.688941] ACPI: Power Resource [LPTP] (off)

[ 20.688987] Linux Plug and Play Support v0.97 (c) Adam Belay

[ 20.689019] pnp: PnP ACPI init

[ 20.689026] ACPI: bus type pnp registered

[ 20.691083] pnp: PnP ACPI: found 12 devices

[ 20.691085] ACPI: ACPI bus type pnp unregistered

[ 20.691089] PnPBIOS: Disabled by ACPI PNP

[ 20.691351] PCI: Using ACPI for IRQ routing

[ 20.691355] PCI: If a device doesn't work, try "pci=routeirq". If it 
helps, post a report

[ 20.700031] NET: Registered protocol family 8

[ 20.700034] NET: Registered protocol family 20

[ 20.700118] AppArmor: AppArmor Filesystem Enabled

[ 20.703989] Time: tsc clocksource has been installed.

[ 20.712014] system 00:01: ioport range 0x4d0-0x4d1 has been reserved

[ 20.712017] system 00:01: ioport range 0x295-0x296 has been reserved

[ 20.712020] system 00:01: ioport range 0x800-0x87f has been reserved

[ 20.712022] system 00:01: ioport range 0x880-0x8ff has been reserved

[ 20.712025] system 00:01: ioport range 0xc00-0xc1f has been reserved

[ 20.712028] system 00:01: iomem range 0xfee00000-0xfee00fff could not 
be reserved

[ 20.742425] PCI: Bridge: 0000:00:01.0

[ 20.742428] IO window: b000-bfff

[ 20.742435] MEM window: cfd00000-cfefffff

[ 20.742439] PREFETCH window: 8fa00000-cfbfffff

[ 20.742466] NET: Registered protocol family 2

[ 20.780005] IP route cache hash table entries: 32768 (order: 5, 131072 
bytes)

[ 20.780450] TCP established hash table entries: 131072 (order: 8, 
1048576 bytes)

[ 20.782796] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

[ 20.784022] TCP: Hash tables configured (established 131072 bind 65536)

[ 20.784025] TCP reno registered

[ 20.796084] checking if image is initramfs... it is

[ 21.243374] Switched to high resolution mode on CPU 0

[ 21.412357] Freeing initrd memory: 7700k freed

[ 21.413180] audit: initializing netlink socket (disabled)

[ 21.413201] audit(1209125943.220:1): initialized

[ 21.415355] VFS: Disk quotas dquot_6.5.1

[ 21.415437] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[ 21.415593] io scheduler noop registered

[ 21.415595] io scheduler anticipatory registered

[ 21.415598] io scheduler deadline registered

[ 21.415608] io scheduler cfq registered (default)

[ 21.415657] Boot video device is 0000:01:00.0

[ 21.415956] isapnp: Scanning for PnP cards...

[ 21.769120] isapnp: No Plug & Play device found

[ 21.799317] Real Time Clock Driver v1.12ac

[ 21.799439] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ 
sharing enabled

[ 21.799573] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 21.800264] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 21.801091] RAMDISK driver initialized: 16 RAM disks of 65536K size 
1024 blocksize

[ 21.801174] input: Macintosh mouse button emulation as 
/devices/virtual/input/input0

[ 21.801281] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 
0x60,0x64 irq 1,12

[ 21.801569] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 21.801574] serio: i8042 AUX port at 0x60,0x64 irq 12

[ 21.810717] mice: PS/2 mouse device common for all mice

[ 21.810844] EISA: Probing bus 0 at eisa.0

[ 21.810879] EISA: Detected 0 cards.

[ 21.810884] cpuidle: using governor ladder

[ 21.810886] cpuidle: using governor menu

[ 21.811048] NET: Registered protocol family 1

[ 21.811078] Using IPI No-Shortcut mode

[ 21.811125] registered taskstats version 1

[ 21.811230] Magic number: 4:409:330

[ 21.811428] hash matches device tty51

[ 21.811483] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found

[ 21.811485] EDD information not available.

[ 21.812075] Freeing unused kernel memory: 364k freed

[ 21.838600] input: AT Translated Set 2 keyboard as 
/devices/platform/i8042/serio0/input/input1

[ 23.034409] fuse init (API version 7.9)

[ 23.647028] SCSI subsystem initialized

[ 23.704074] libata version 3.00 loaded.

[ 23.712336] usbcore: registered new interface driver usbfs

[ 23.712367] usbcore: registered new interface driver hub

[ 23.736269] usbcore: registered new device driver usb

[ 23.742410] sis900.c: v1.08.10 Apr. 2 2006

[ 23.742512] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) 
-> IRQ 16

[ 23.743532] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at 
address 1.

[ 23.753742] 0000:00:04.0: Using transceiver found at address 1 as default

[ 23.755982] eth0: SiS 900 PCI Fast Ethernet at 0xdc00, IRQ 16, 
00:0b:6a:3e:61:9e

[ 23.779411] pata_sis 0000:00:02.5: version 0.5.2

[ 23.784199] scsi0 : pata_sis

[ 23.788784] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller 
(OHCI) Driver

[ 23.790646] scsi1 : pata_sis

[ 23.791274] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14

[ 23.791277] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15

[ 23.888116] Floppy drive(s): fd0 is 1.44M

[ 23.907747] FDC 0 is a post-1991 82077

[ 23.960410] ata1.00: ATA-6: WDC WD800BB-00FJA0, 13.03G13, max UDMA/100

[ 23.960416] ata1.00: 156301488 sectors, multi 16: LBA

[ 23.960589] ata1.01: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133

[ 23.960592] ata1.01: 160086528 sectors, multi 16: LBA

[ 23.968275] ata1.00: configured for UDMA/100

[ 23.984274] ata1.01: configured for UDMA/133

[ 24.467534] ata2.00: ATAPI: SAMSUNG CD-R/RW DRIVE SW-252F, R802, max 
UDMA/33

[ 24.467555] ata2.01: ATAPI: HL-DT-STDVD-RAM GSA-H55N, 1.01, max UDMA/66

[ 24.467568] ata2.01: limited to UDMA/33 due to 40-wire cable

[ 24.639359] ata2.00: configured for UDMA/33

[ 24.811161] ata2.01: configured for UDMA/33

[ 24.811323] scsi 0:0:0:0: Direct-Access ATA WDC WD800BB-00FJ 13.0 PQ: 0 
ANSI: 5

[ 24.811778] scsi 0:0:1:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 
ANSI: 5

[ 24.813082] scsi 1:0:0:0: CD-ROM SAMSUNG CD-R/RW SW-252F R802 PQ: 0 ANSI: 5

[ 24.814408] scsi 1:0:1:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55N 1.01 PQ: 0 
ANSI: 5

[ 24.814628] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) 
-> IRQ 17

[ 24.814645] ohci_hcd 0000:00:03.0: OHCI Host Controller

[ 24.815041] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus 
number 1

[ 24.815063] ohci_hcd 0000:00:03.0: irq 17, io mem 0xcfffd000

[ 24.826460] Driver 'sd' needs updating - please use bus_type methods

[ 24.826596] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors 
(80026 MB)

[ 24.826614] sd 0:0:0:0: [sda] Write Protect is off

[ 24.826617] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 24.826636] sd 0:0:0:0: [sda] Write cache: enabled, read cache: 
enabled, doesn't support DPO or FUA

[ 24.826694] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors 
(80026 MB)

[ 24.826705] sd 0:0:0:0: [sda] Write Protect is off

[ 24.826707] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 24.826723] sd 0:0:0:0: [sda] Write cache: enabled, read cache: 
enabled, doesn't support DPO or FUA

[ 24.826728] sda:<4>Driver 'sr' needs updating - please use bus_type methods

[ 24.842629] sda1 sda2 sda3

[ 24.861235] sd 0:0:0:0: [sda] Attached SCSI disk

[ 24.861327] sd 0:0:1:0: [sdb] 160086528 512-byte hardware sectors 
(81964 MB)

[ 24.861344] sd 0:0:1:0: [sdb] Write Protect is off

[ 24.861346] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00

[ 24.861366] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: 
enabled, doesn't support DPO or FUA

[ 24.861416] sd 0:0:1:0: [sdb] 160086528 512-byte hardware sectors 
(81964 MB)

[ 24.861426] sd 0:0:1:0: [sdb] Write Protect is off

[ 24.861428] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00

[ 24.861445] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: 
enabled, doesn't support DPO or FUA

[ 24.861448] sdb: sdb1

[ 24.864492] sd 0:0:1:0: [sdb] Attached SCSI disk

[ 24.875204] usb usb1: configuration #1 chosen from 1 choice

[ 24.875236] hub 1-0:1.0: USB hub found

[ 24.875247] hub 1-0:1.0: 3 ports detected

[ 24.877059] sd 0:0:0:0: Attached scsi generic sg0 type 0

[ 24.877082] sd 0:0:1:0: Attached scsi generic sg1 type 0

[ 24.877104] sr 1:0:0:0: Attached scsi generic sg2 type 5

[ 24.877124] scsi 1:0:1:0: Attached scsi generic sg3 type 5

[ 24.879761] sr0: scsi3-mmc drive: 52x/1x writer cd/rw xa/form2 cdda tray

[ 24.879770] Uniform CD-ROM driver Revision: 3.20

[ 24.879843] sr 1:0:0:0: Attached scsi CD-ROM sr0

[ 24.885455] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 
cdda tray

[ 24.885532] sr 1:0:1:0: Attached scsi CD-ROM sr1

[ 24.978861] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) 
-> IRQ 18

[ 24.978886] ohci_hcd 0000:00:03.1: OHCI Host Controller

[ 24.978917] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus 
number 2

[ 24.978941] ohci_hcd 0000:00:03.1: irq 18, io mem 0xcfffe000

[ 25.036707] usb usb2: configuration #1 chosen from 1 choice

[ 25.036740] hub 2-0:1.0: USB hub found

[ 25.036751] hub 2-0:1.0: 3 ports detected

[ 25.138894] ACPI: PCI Interrupt 0000:00:03.2[D] -> GSI 23 (level, low) 
-> IRQ 19

[ 25.138914] ehci_hcd 0000:00:03.2: EHCI Host Controller

[ 25.138950] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus 
number 3

[ 25.138998] PCI: cache line size of 64 is not supported by device 
0000:00:03.2

[ 25.139011] ehci_hcd 0000:00:03.2: irq 19, io mem 0xcffff000

[ 25.282281] usb 1-2: new full speed USB device using ohci_hcd and address 2

[ 25.294254] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 
10 Dec 2004

[ 25.294409] usb usb3: configuration #1 chosen from 1 choice

[ 25.294437] hub 3-0:1.0: USB hub found

[ 25.294447] hub 3-0:1.0: 6 ports detected

[ 25.406985] Attempting manual resume

[ 25.406990] swsusp: Resume From Partition 8:3

[ 25.406992] PM: Checking swsusp image.

[ 25.413309] PM: Resume from disk failed.

[ 25.443364] kjournald starting. Commit interval 5 seconds

[ 25.443387] EXT3-fs: mounted filesystem with ordered data mode.

[ 26.388892] usb 1-2: new full speed USB device using ohci_hcd and address 3

[ 26.597857] usb 1-2: configuration #1 chosen from 1 choice

[ 26.904240] usb 2-2: new full speed USB device using ohci_hcd and address 2

[ 27.107956] usb 2-2: configuration #1 chosen from 1 choice

[ 32.729036] Linux agpgart interface v0.102

[ 32.793056] agpgart: Detected SiS chipset - id:1857

[ 32.800172] agpgart: AGP aperture is 64M @ 0xd0000000

[ 32.912283] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[ 32.972404] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[ 33.065632] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00

[ 33.200563] input: Power Button (FF) as /devices/virtual/input/input2

[ 33.216352] ACPI: Power Button (FF) [PWRF]

[ 33.216522] input: Power Button (CM) as /devices/virtual/input/input3

[ 33.228342] ACPI: Power Button (CM) [PWRB]

[ 35.044907] Linux video capture interface: v2.00

[ 35.135210] quickcam: QuickCam USB camera found (driver version 
QuickCam USB 0.6.6 $Date: 2006/11/04 08:38:14 $)

[ 35.135218] quickcam: Kernel:2.6.24-16-generic bus:1 class:FF 
subclass:FF vendor:046D product:0840

[ 35.148314] quickcam: Sensor HDCS-1000/1100 detected

[ 35.154365] quickcam: Registered device: /dev/video0

[ 35.154395] usbcore: registered new interface driver quickcam

[ 35.350164] input: PC Speaker as /devices/platform/pcspkr/input/input4

[ 35.517508] bttv: driver version 0.9.17 loaded

[ 35.517515] bttv: using 8 buffers with 2080k (520 pages) each for capture

[ 35.517597] bttv: Bt8xx card found (0).

[ 35.517632] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) 
-> IRQ 20

[ 35.517646] bttv0: Bt878 (rev 17) at 0000:00:09.0, irq: 20, latency: 
32, mmio: 0xcfcfe000

[ 35.517770] bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID 
is 11bd:0012

[ 35.517773] bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]

[ 35.517807] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]

[ 35.518131] bttv0: i2c: checking for MSP34xx @ 0x80... not found

[ 35.519103] bttv0: pinnacle/mt: id=1 info="PAL / mono" radio=no

[ 35.519106] bttv0: tuner type=33

[ 35.519110] bttv0: i2c: checking for MSP34xx @ 0x80... not found

[ 35.519616] bttv0: i2c: checking for TDA9875 @ 0xb0... not found

[ 35.520142] bttv0: i2c: checking for TDA7432 @ 0x8a... not found

[ 35.707992] tuner 1-0043: chip found @ 0x86 (bt878 #0 [sw])

[ 35.708025] tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)

[ 35.708028] tuner 1-0043: type set to tda9887

[ 35.709988] Chip ID is not zero. It is not a TEA5767

[ 35.709990] tuner 1-0060: chip found @ 0xc0 (bt878 #0 [sw])

[ 35.712491] mt20xx 1-0060: microtune: companycode=4d54 part=04 rev=04

[ 35.944865] mt20xx 1-0060: microtune MT2032 found, OK

[ 35.944872] tuner 1-0060: type set to MT2032

[ 35.947396] mt20xx 1-0060: microtune: companycode=4d54 part=04 rev=04

[ 36.128766] mt20xx 1-0060: microtune MT2032 found, OK

[ 36.128773] tuner 1-0060: type set to MT2032

[ 36.150392] bttv0: registered device video1

[ 36.150419] bttv0: registered device vbi0

[ 36.150443] bttv0: PLL: 28636363 => 35468950 .. ok

[ 36.210629] bt878: AUDIO driver version 0.0.0 loaded

[ 36.210690] bt878: Bt878 AUDIO function found (0).

[ 36.210716] ACPI: PCI Interrupt 0000:00:09.1[A] -> GSI 17 (level, low) 
-> IRQ 20

[ 36.210724] bt878_probe: card id=[0x1211bd], Unknown card.

[ 36.210726] Exiting..

[ 36.210731] ACPI: PCI interrupt for device 0000:00:09.1 disabled

[ 36.210740] bt878: probe of 0000:00:09.1 failed with error -22

[ 36.358184] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) 
-> IRQ 21

[ 36.558874] input: ImPS/2 Generic Wheel Mouse as 
/devices/platform/i8042/serio1/input/input5

[ 36.591304] parport_pc 00:0a: reported by Plug and Play ACPI

[ 36.591411] parport0: PC-style at 0x378 (0x778), irq 7, dma 0 
[PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]

[ 38.948085] lp0: using parport0 (interrupt-driven).

[ 39.006126] Adding 1445840k swap on /dev/sda3. Priority:-1 extents:1 
across:1445840k

[ 39.558360] EXT3 FS on sda2, internal journal

[ 40.769530] ip_tables: (C) 2000-2006 Netfilter Core Team

[ 41.266328] No dock devices found.

[ 42.284078] apm: BIOS not found.

[ 42.397169] ppdev: user-space parallel port driver

[ 42.501755] audit(1209118764.631:2): type=1503 
operation="inode_permission" requested_mask="a::" denied_mask="a::" 
name="/dev/tty" pid=4853 profile="/usr/sbin/cupsd" namespace="default"

[ 43.659210] Bluetooth: Core ver 2.11

[ 43.660391] NET: Registered protocol family 31

[ 43.660397] Bluetooth: HCI device and connection manager initialized

[ 43.660402] Bluetooth: HCI socket layer initialized

[ 43.686622] Bluetooth: L2CAP ver 2.9

[ 43.686630] Bluetooth: L2CAP socket layer initialized

[ 43.734468] Bluetooth: RFCOMM socket layer initialized

[ 43.734495] Bluetooth: RFCOMM TTY layer initialized

[ 43.734497] Bluetooth: RFCOMM ver 1.8

[ 45.573875] eth0: Media Link On 100mbps full-duplex

[ 45.694462] [drm] Initialized drm 1.1.0 20060810

[ 45.710858] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) 
-> IRQ 22

[ 45.710996] [drm] Initialized radeon 1.28.0 20060524 on minor 0

[ 47.234559] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.

[ 47.235256] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode

[ 47.236240] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode

[ 47.507803] [drm] Setting GART location based on new memory map

[ 47.507819] [drm] Loading R300 Microcode

[ 47.507862] [drm] writeback test succeeded in 1 usecs

[ 47.813425] NET: Registered protocol family 17

[ 50.389743] NET: Registered protocol family 10

[ 50.389978] lo: Disabled Privacy Extensions

[ 60.494894] eth0: no IPv6 routers present

[ 2796.606330] usb 3-6: new high speed USB device using ehci_hcd and 
address 4

[ 2796.741520] usb 3-6: configuration #1 chosen from 2 choices

[ 2796.959798] usbcore: registered new interface driver libusual

[ 2797.012709] Initializing USB Mass Storage driver...

[ 2797.022189] scsi2 : SCSI emulation for USB Mass Storage devices

[ 2797.023956] usbcore: registered new interface driver usb-storage

[ 2797.023964] USB Mass Storage support registered.

[ 2797.024966] usb-storage: device found at 4

[ 2797.024969] usb-storage: waiting for device to settle before scanning

[ 2802.015887] usb-storage: device scan complete

[ 2802.016873] scsi 2:0:0:0: Direct-Access Apple iPod 1.62 PQ: 0 ANSI: 0

[ 2802.025612] sd 2:0:0:0: [sdc] 3999743 512-byte hardware sectors (2048 MB)

[ 2802.026967] sd 2:0:0:0: [sdc] Write Protect is off

[ 2802.026972] sd 2:0:0:0: [sdc] Mode Sense: 68 00 00 08

[ 2802.026975] sd 2:0:0:0: [sdc] Assuming drive cache: write through

[ 2802.029449] sd 2:0:0:0: [sdc] 3999743 512-byte hardware sectors (2048 MB)

[ 2802.030568] sd 2:0:0:0: [sdc] Write Protect is off

[ 2802.030571] sd 2:0:0:0: [sdc] Mode Sense: 68 00 00 08

[ 2802.030573] sd 2:0:0:0: [sdc] Assuming drive cache: write through

[ 2802.030579] sdc: sdc1 sdc2

[ 2802.034489] sd 2:0:0:0: [sdc] Attached SCSI removable disk

[ 2802.034543] sd 2:0:0:0: Attached scsi generic sg4 type 0

[ 2976.697108] usb 3-5: new high speed USB device using ehci_hcd and 
address 5

[ 2976.867112] usb 3-5: configuration #1 chosen from 1 choice

-- 