[ubuntu-it] scanner

[Gianfranco Liporace]

Il giorno gio, 28/09/2006 alle 14.46 +0200, Eugenio Odorifero ha
scritto:
> Salve,
> nel fare ricerche per far avviare lo scanner della HP Officejet 6315 ho
> trovato l'interessante funzione sane-find-scanner. 
> Se lo avvio, mi da questo
> 
> eu a eu-desktop:~$ sudo sane-find-scanner
> 
>   # sane-find-scanner will now attempt to detect your scanner. If the
>   # result is different from what you expected, first make sure your
>   # scanner is powered up and properly connected to your computer.
> 
>   # No SCSI scanners found. If you expected something different, make
> sure that
>   # you have loaded a kernel SCSI driver for your SCSI adapter.
> 
> found USB scanner (vendor=0x03f0 [HP], product=0x5311 [Officejet 6300
> series]) at libusb:004:003
> found USB scanner (vendor=0x067b, product=0x2303) at libusb:002:002
>   # Your USB scanner was (probably) detected. It may or may not be
> supported by
>   # SANE. Try scanimage -L and read the backend's manpage.
> 
>   # Not checking for parallel port scanners.
> 
>   # Most Scanners connected to the parallel port or other proprietary
> ports
>   # can't be detected by this program.
> 
> 
> Quindi m'identifica lo scanner ma non fornisce un indirizzo esplicito.
> Cmq mi suggerisce scanimage -L
> 
> >sudo scanimage -L
> 
> No scanners were identified. If you were expecting something different,
> check that the scanner is plugged in, turned on and detected by the
> sane-find-scanner tool (if appropriate). Please read the documentation
> which came with this software (README, FAQ, manpages).
> 
> Qualcuno mi può dare consigli?
> 
> Eugenio
> -------
> 
> 
> 

Ciao,
sembra che il tuo apparecchio non sia per il momento supportato dai
driver presenti nei repository dapper (0.9.7) e nemmeno dai recenti sul
sito hp (1.6.9); prova a chiedere consiglio nella mailing list di aiuto
hplip (http://sourceforge.net/mailarchive/forum.php?forum_id=48102)
credo siano presenti anche gli sviluppatori dei driver.

Gianfranco