[ubuntu-it] (senza oggetto)
Danilo Sidella
danilo_fw_bitonto a msn.com
Mer 22 Nov 2006 16:22:19 GMT
[17179569.184000] Linux version 2.6.15-27-386 (buildd a terranova) (gcc
version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Sat Sep 16 01:51:59 UTC
2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
[17179569.184000] BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI
data)
[17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 255MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000f5b00
[17179569.184000] On node 0 totalpages: 65520
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000] Normal zone: 61424 pages, LIFO batch:15
[17179569.184000] HighMem zone: 0 pages, LIFO batch:0
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 KM266 ) @
0x000f7b20
[17179569.184000] ACPI: RSDT (v001 KM266 AWRDACPI 0x42302e31 AWRD
0x00000000) @ 0x0fff3000
[17179569.184000] ACPI: FADT (v001 KM266 AWRDACPI 0x42302e31 AWRD
0x00000000) @ 0x0fff3040
[17179569.184000] ACPI: MADT (v001 KM266 AWRDACPI 0x42302e31 AWRD
0x00000000) @ 0x0fff6600
[17179569.184000] ACPI: DSDT (v001 KM266 AWRDACPI 0x00001000 MSFT
0x0100000d) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x4008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:8 APIC version 16
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI
0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 20000000 (gap:
10000000:eec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda5 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 1024 (order: 10, 16384 bytes)
[17179569.184000] Detected 2131.879 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179570.944000] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
[17179570.944000] Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
[17179570.952000] Memory: 249140k/262080k available (1976k kernel code,
12348k reserved, 606k data, 288k init, 0k highmem)
[17179570.952000] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[17179571.032000] Calibrating delay using timer specific routine.. 4267.50
BogoMIPS (lpj=8535001)
[17179571.032000] Security Framework v1.0.0 initialized
[17179571.032000] SELinux: Disabled at boot.
[17179571.032000] Mount-cache hash table entries: 512
[17179571.032000] CPU: After generic identify, caps: 0383fbff c1c3fbff
00000000 00000000 00000000 00000000 00000000
[17179571.032000] CPU: After vendor identify, caps: 0383fbff c1c3fbff
00000000 00000000 00000000 00000000 00000000
[17179571.032000] CPU: CLK_CTL MSR was 60031223. Reprogramming to 20031223
[17179571.032000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[17179571.032000] CPU: L2 Cache: 256K (64 bytes/line)
[17179571.032000] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000
00000420 00000000 00000000 00000000
[17179571.032000] mtrr: v2.0 (20020519)
[17179571.032000] CPU: AMD Athlon(tm) XP 2600+ stepping 01
[17179571.032000] Enabling fast FPU save and restore... done.
[17179571.032000] Enabling unmasked SIMD FPU exception support... done.
[17179571.032000] Checking 'hlt' instruction... OK.
[17179571.048000] checking if image is initramfs... it is
[17179571.548000] Freeing initrd memory: 6613k freed
[17179571.564000] ACPI: Looking for DSDT ... not found!
[17179571.568000] ENABLING IO-APIC IRQs
[17179571.568000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179571.712000] NET: Registered protocol family 16
[17179571.712000] EISA bus registered
[17179571.712000] ACPI: bus type pci registered
[17179571.712000] PCI: PCI BIOS revision 2.10 entry at 0xfba20, last bus=1
[17179571.712000] PCI: Using configuration type 1
[17179571.712000] ACPI: Subsystem revision 20051216
[17179571.720000] ACPI: Interpreter enabled
[17179571.720000] ACPI: Using IOAPIC for interrupt routing
[17179571.720000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179571.720000] PCI: Probing PCI hardware (bus 00)
[17179571.720000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[17179571.720000] PCI quirk: region 4000-407f claimed by vt8235 PM
[17179571.720000] PCI quirk: region 5000-500f claimed by vt8235 SMB
[17179571.724000] Boot video device is 0000:01:00.0
[17179571.724000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179571.740000] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11
12 14 15)
[17179571.740000] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 10 11
12 14 15)
[17179571.740000] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11
12 14 15)
[17179571.740000] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11
12 14 15)
[17179571.740000] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
[17179571.740000] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled.
[17179571.740000] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
[17179571.744000] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
[17179571.744000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179571.744000] pnp: PnP ACPI init
[17179571.748000] pnp: PnP ACPI: found 10 devices
[17179571.748000] PnPBIOS: Disabled by ACPI PNP
[17179571.748000] PCI: Using ACPI for IRQ routing
[17179571.748000] PCI: If a device doesn't work, try "pci=routeirq". If it
helps, post a report
[17179571.772000] PCI: Bridge: 0000:00:01.0
[17179571.772000] IO window: disabled.
[17179571.772000] MEM window: e4000000-e5ffffff
[17179571.772000] PREFETCH window: d0000000-dfffffff
[17179571.772000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179571.772000] audit: initializing netlink socket (disabled)
[17179571.772000] audit(1164210935.772:1): initialized
[17179571.772000] VFS: Disk quotas dquot_6.5.1
[17179571.772000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179571.772000] Initializing Cryptographic API
[17179571.772000] io scheduler noop registered
[17179571.772000] io scheduler anticipatory registered
[17179571.772000] io scheduler deadline registered
[17179571.772000] io scheduler cfq registered
[17179571.772000] isapnp: Scanning for PnP cards...
[17179572.128000] isapnp: No Plug & Play device found
[17179572.140000] PNP: No PS/2 controller found. Probing ports directly.
[17179572.144000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179572.148000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179572.148000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ
sharing enabled
[17179572.148000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179572.148000] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179572.148000] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024 blocksize
[17179572.148000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179572.148000] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[17179572.148000] mice: PS/2 mouse device common for all mice
[17179572.152000] EISA: Probing bus 0 at eisa.0
[17179572.152000] Cannot allocate resource for EISA slot 4
[17179572.152000] Cannot allocate resource for EISA slot 5
[17179572.152000] EISA: Detected 0 cards.
[17179572.152000] NET: Registered protocol family 2
[17179572.248000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179572.260000] IP route cache hash table entries: 4096 (order: 2, 16384
bytes)
[17179572.260000] TCP established hash table entries: 16384 (order: 4, 65536
bytes)
[17179572.260000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[17179572.260000] TCP: Hash tables configured (established 16384 bind 16384)
[17179572.260000] TCP reno registered
[17179572.260000] TCP bic registered
[17179572.260000] NET: Registered protocol family 1
[17179572.260000] NET: Registered protocol family 8
[17179572.260000] NET: Registered protocol family 20
[17179572.260000] Using IPI Shortcut mode
[17179572.260000] ACPI wakeup devices:
[17179572.260000] PCI0 USB0 USB1 USB2 USB6 USB7 USB8 USB9 UAR1 ECP1
[17179572.260000] ACPI: (supports S0 S1 S3 S4 S5)
[17179572.260000] Freeing unused kernel memory: 288k freed
[17179572.304000] vga16fb: initializing
[17179572.304000] vga16fb: mapped to 0xc00a0000
[17179572.428000] Console: switching to colour frame buffer device 80x25
[17179572.428000] fb0: VGA16 VGA frame buffer device
[17179573.496000] Capability LSM initialized
[17179573.608000] ACPI: Fan [FAN] (on)
[17179573.612000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[17179573.616000] ACPI: Thermal Zone [THRM] (40 C)
[17179574.188000] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[17179574.188000] **** SET: Misaligned resource pointer: cfea22c2 Type 07
Len 0
[17179574.188000] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using
IRQ 20
[17179574.188000] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[17179574.188000] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI
20 (level, low) -> IRQ 169
[17179574.188000] PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 9
[17179574.188000] VP_IDE: chipset revision 6
[17179574.188000] VP_IDE: not 100% native mode: will probe irqs later
[17179574.188000] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on
pci0000:00:11.1
[17179574.188000] ide0: BM-DMA at 0xe400-0xe407, BIOS settings: hda:DMA,
hdb:pio
[17179574.188000] ide1: BM-DMA at 0xe408-0xe40f, BIOS settings: hdc:DMA,
hdd:DMA
[17179574.188000] Probing IDE interface ide0...
[17179574.608000] hda: ST380022A, ATA DISK drive
[17179575.280000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179575.284000] Probing IDE interface ide1...
[17179576.148000] hdc: JLMS XJ-HD166S, ATAPI CD/DVD-ROM drive
[17179576.932000] hdd: LITE-ON LTR-48246S, ATAPI CD/DVD-ROM drive
[17179576.988000] ide1 at 0x170-0x177,0x376 on irq 15
[17179576.992000] hda: max request size: 128KiB
[17179577.008000] hda: 156301488 sectors (80026 MB) w/1024KiB Cache,
CHS=65535/16/63, UDMA(100)
[17179577.008000] hda: cache flushes supported
[17179577.008000] hda: hda1 hda2 < hda5 hda6 >
[17179577.056000] hdc: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
[17179577.056000] Uniform CD-ROM driver Revision: 3.20
[17179577.060000] hdd: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache,
UDMA(33)
[17179577.368000] usbcore: registered new driver usbfs
[17179577.368000] usbcore: registered new driver hub
[17179577.368000] USB Universal Host Controller Interface driver v2.3
[17179577.368000] **** SET: Misaligned resource pointer: cfa8c2e2 Type 07
Len 0
[17179577.368000] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using
IRQ 21
[17179577.368000] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[17179577.368000] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI
21 (level, low) -> IRQ 177
[17179577.368000] PCI: Via IRQ fixup for 0000:00:10.0, from 255 to 1
[17179577.368000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[17179577.368000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned
bus number 1
[17179577.368000] uhci_hcd 0000:00:10.0: irq 177, io base 0x0000d800
[17179577.372000] hub 1-0:1.0: USB hub found
[17179577.372000] hub 1-0:1.0: 2 ports detected
[17179577.476000] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKB] -> GSI
21 (level, low) -> IRQ 177
[17179577.476000] PCI: Via IRQ fixup for 0000:00:10.1, from 255 to 1
[17179577.476000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[17179577.476000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned
bus number 2
[17179577.476000] uhci_hcd 0000:00:10.1: irq 177, io base 0x0000dc00
[17179577.476000] hub 2-0:1.0: USB hub found
[17179577.476000] hub 2-0:1.0: 2 ports detected
[17179577.580000] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKB] -> GSI
21 (level, low) -> IRQ 177
[17179577.580000] PCI: Via IRQ fixup for 0000:00:10.2, from 255 to 1
[17179577.580000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[17179577.580000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned
bus number 3
[17179577.580000] uhci_hcd 0000:00:10.2: irq 177, io base 0x0000e000
[17179577.580000] hub 3-0:1.0: USB hub found
[17179577.580000] hub 3-0:1.0: 2 ports detected
[17179577.684000] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKB] -> GSI
21 (level, low) -> IRQ 177
[17179577.684000] PCI: Via IRQ fixup for 0000:00:10.3, from 255 to 1
[17179577.684000] ehci_hcd 0000:00:10.3: EHCI Host Controller
[17179577.684000] ehci_hcd 0000:00:10.3: new USB bus registered, assigned
bus number 4
[17179577.684000] ehci_hcd 0000:00:10.3: irq 177, io mem 0xe7011000
[17179577.684000] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
[17179577.684000] hub 4-0:1.0: USB hub found
[17179577.684000] hub 4-0:1.0: 6 ports detected
[17179577.716000] usb 1-1: new full speed USB device using uhci_hcd and
address 2
[17179577.900000] Attempting manual resume
[17179577.948000] EXT3-fs: mounted filesystem with ordered data mode.
[17179577.964000] kjournald starting. Commit interval 5 seconds
[17179578.660000] usb 4-1: new high speed USB device using ehci_hcd and
address 2
[17179578.792000] hub 4-1:1.0: USB hub found
[17179578.792000] hub 4-1:1.0: 4 ports detected
[17179579.688000] usb 1-2: new full speed USB device using uhci_hcd and
address 3
[17179580.072000] usb 2-1: new low speed USB device using uhci_hcd and
address 2
[17179580.492000] usb 2-2: new low speed USB device using uhci_hcd and
address 3
[17179587.736000] Linux agpgart interface v0.101 (c) Dave Jones
[17179587.740000] agpgart: Detected VIA PM266/KM266 chipset
[17179587.744000] agpgart: AGP aperture is 64M @ 0xe0000000
[17179588.020000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179588.024000] shpchp: Standard Hot Plug PCI Controller Driver version:
0.4
[17179588.140000] Real Time Clock Driver v1.12
[17179588.216000] irda_init()
[17179588.216000] NET: Registered protocol family 23
[17179588.256000] 8139too Fast Ethernet driver 0.9.27
[17179588.256000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 18 (level, low)
-> IRQ 185
[17179588.256000] eth0: RealTek RTL8139 at 0xd08ba000, 00:40:ca:51:e8:9f,
IRQ 185
[17179588.256000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[17179588.372000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[17179588.544000] **** SET: Misaligned resource pointer: cade9da2 Type 07
Len 0
[17179588.544000] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using
IRQ 22
[17179588.544000] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[17179588.544000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI
22 (level, low) -> IRQ 193
[17179588.544000] PCI: Via IRQ fixup for 0000:00:11.5, from 255 to 1
[17179588.544000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[17179588.580000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional
printer dev 3 if 0 alt 1 proto 2 vid 0x03F0 pid 0x3E02
[17179588.580000] usbcore: registered new driver usblp
[17179588.580000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class
driver
[17179588.664000] input: PC Speaker as /class/input/input1
[17179588.676000] parport: PnPBIOS parport detected.
[17179588.676000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
[17179588.848000] nvidia: module license 'NVIDIA' taints kernel.
[17179588.864000] Floppy drive(s): fd0 is 1.44M
[17179588.880000] FDC 0 is a post-1991 82077
[17179589.076000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low)
-> IRQ 201
[17179589.076000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8776
Mon Oct 16 21:56:04 PDT 2006
[17179589.616000] usbcore: registered new driver hiddev
[17179589.632000] input: Microsoft Comfort Curve Keyboard 2000 as
/class/input/input2
[17179589.632000] input: USB HID v1.11 Keyboard [Microsoft Comfort Curve
Keyboard 2000] on usb-0000:00:10.1-1
[17179589.656000] input: Microsoft Comfort Curve Keyboard 2000 as
/class/input/input3
[17179589.656000] input: USB HID v1.11 Device [Microsoft Comfort Curve
Keyboard 2000] on usb-0000:00:10.1-1
[17179589.676000] input: Logitech USB Receiver as /class/input/input4
[17179589.676000] input: USB HID v1.10 Mouse [Logitech USB Receiver] on
usb-0000:00:10.1-2
[17179589.676000] usbcore: registered new driver usbhid
[17179589.676000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179589.696000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[17179589.820000] ts: Compaq touchscreen protocol output
[17179590.232000] lp0: using parport0 (interrupt-driven).
[17179590.292000] Adding 1028120k swap on /dev/hda6. Priority:-1 extents:1
across:1028120k
[17179590.428000] EXT3 FS on hda5, internal journal
[17179590.620000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179590.620000] md: bitmap version 4.39
[17179590.712000] NET: Registered protocol family 17
[17179591.068000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
dm-devel a redhat.com
[17179591.300000] cdrom: open failed.
[17179591.740000] cdrom: open failed.
[17179591.744000] cdrom: open failed.
[17179592.728000] NTFS driver 2.1.25 [Flags: R/O MODULE].
[17179592.800000] NTFS volume version 3.1.
[17179592.944000] NET: Registered protocol family 10
[17179592.944000] lo: Disabled Privacy Extensions
[17179592.944000] IPv6 over IPv4 tunneling driver
[17179599.424000] ACPI: Power Button (FF) [PWRF]
[17179599.424000] ACPI: Power Button (CM) [PWRB]
[17179599.532000] ibm_acpi: ec object not found
[17179599.568000] pcc_acpi: loading...
[17179603.332000] ppdev: user-space parallel port driver
[17179603.728000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[17179603.728000] apm: overridden by ACPI.
[17179603.860000] eth0: no IPv6 routers present
[17179611.292000] Bluetooth: Core ver 2.8
[17179611.292000] NET: Registered protocol family 31
[17179611.292000] Bluetooth: HCI device and connection manager initialized
[17179611.292000] Bluetooth: HCI socket layer initialized
[17179611.328000] Bluetooth: L2CAP ver 2.8
[17179611.328000] Bluetooth: L2CAP socket layer initialized
[17179611.332000] Bluetooth: RFCOMM socket layer initialized
[17179611.332000] Bluetooth: RFCOMM TTY layer initialized
[17179611.332000] Bluetooth: RFCOMM ver 1.7
[17179720.748000] ISO 9660 Extensions: Microsoft Joliet Level 3
[17179720.908000] ISOFS: changing to secondary root
[17179927.804000] usb 4-6: new high speed USB device using ehci_hcd and
address 6
[17179929.108000] SCSI subsystem initialized
[17179929.208000] Initializing USB Mass Storage driver...
[17179929.208000] scsi0 : SCSI emulation for USB Mass Storage devices
[17179929.212000] usb-storage: device found at 6
[17179929.212000] usb-storage: waiting for device to settle before scanning
[17179929.212000] usbcore: registered new driver usb-storage
[17179929.212000] USB Mass Storage support registered.
[17179934.244000] Vendor: Hitachi Model: HDT725040VLAT80 Rev: V5CO
[17179934.244000] Type: Direct-Access ANSI SCSI
revision: 00
[17179934.260000] usb-storage: device scan complete
[17179934.296000] Driver 'sd' needs updating - please use bus_type methods
[17179934.296000] SCSI device sda: 781422768 512-byte hdwr sectors (400088
MB)
[17179934.296000] sda: assuming drive cache: write through
[17179934.300000] SCSI device sda: 781422768 512-byte hdwr sectors (400088
MB)
[17179934.300000] sda: assuming drive cache: write through
[17179934.300000] sda: sda1
[17179934.312000] sd 0:0:0:0: Attached scsi disk sda
[17179934.352000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17180027.860000] usb 4-6: USB disconnect, address 6
[17184026.584000] usb 4-6: new high speed USB device using ehci_hcd and
address 7
[17184026.796000] scsi1 : SCSI emulation for USB Mass Storage devices
[17184026.796000] usb-storage: device found at 7
[17184026.796000] usb-storage: waiting for device to settle before scanning
[17184031.828000] Vendor: Hitachi Model: HDT725040VLAT80 Rev: V5CO
[17184031.828000] Type: Direct-Access ANSI SCSI
revision: 00
[17184031.832000] SCSI device sda: 781422768 512-byte hdwr sectors (400088
MB)
[17184031.832000] sda: assuming drive cache: write through
[17184031.832000] SCSI device sda: 781422768 512-byte hdwr sectors (400088
MB)
[17184031.832000] sda: assuming drive cache: write through
[17184031.832000] sda: sda1
[17184031.844000] sd 1:0:0:0: Attached scsi disk sda
[17184031.844000] sd 1:0:0:0: Attached scsi generic sg0 type 0
[17184031.848000] usb-storage: device scan complete
questo è l'output del comando dmesg ma per me è più sconosciuto dell'arabo
non capisco a cosa serva... se tu riuscresti a darmi + informazioni grazie
in anticipo ;)
_________________________________________________________________
Windows Live Mail: 2 GB di spazio per le tue foto e le tue mail!
http://join.msn.com/mailbeta/features#1
Maggiori informazioni sulla lista
ubuntu-it