[ubuntu-it] Fwd: ubuntu&Suse 9.1

Romolo Bonfante romolo.bonfante a gmail.com
Mar 23 Ago 2005 03:25:25 CDT


Il 23/08/05, max<max a maximumdebian.org> ha scritto:
> ho dato una occhiata al manuale di mknod ed ora mi ricordo (spero) :)
> 
> hai due possibilitŕ:
> 
> 
> 1 )
> fai il boot con una livecd tipo knoppix o altro
> poi (come root) monta il root di Ubuntu con:
> 
> # mount -t ext3 /dev/hda6 /mnt/ubuntu
> 
> ora monti la root di suse
> # mount -t reiserfs /dev/hdf7 /mnt/suse
> 
> 
> poi copi i devices:
> 
> cp /mnt/suse/dev/hdf* /mnt/ubuntu/dev/
> 
> 
> 2) altra possibilitŕ... migliore senz'altro
> 
> fai il boot in suse edai questo comando
> 
> # file /dev/hdf11
> 
> ti deve dare qualche cosa tipo:
> 
> # /dev/hdf11: block special (4/11)
> 
> scrivi i due numerini finali in un pezzo di carta e riavvia in ubuntu
> 
> ora in ubuntu diventa root con
> # sudo su
> 
> ora creiamo il device mancante:
> 
> # mknod -b x y
> 
> dove x y sono i due numeri "prelevati" da suse
> 
> se tutto va bene dovresti essere in grado di montare la home di suse con
> 
> # mount -t reiserfs /dev/hdf11 /mnt

ecco l'ultimo aggiornamento! 
""
root a romolo:/home/rombon # mknod - b 33 75
root a romolo:/home/rombon # ls /proc/ide
drivers  hda  hdb  hdc  hdd  ide0  ide1  via
root a romolo:/home/rombon # mount -t auto /dev/hdf11 /mnt
mount: il device speciale /dev/hdf11 non esiste
root a romolo:/home/rombon # mount -t reiserfs /dev/hdf11 /mnt
mount: il device speciale /dev/hdf11 non esiste
root a romolo:/home/rombon #
""
Grazie, Romolo
> 
> a questo punto puoi fare le modifiche di cui ti ho parlato nelle
> precedenti email
> 
> attento al UserID e GroupID
> 
> ciao
> MaX
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> Romolo Bonfante wrote:
> 
> >Il 23/08/05, Romolo Bonfante<romolo.bonfante a gmail.com> ha scritto:
> >
> >
> >>Il 22/08/05, max<max a maximumdebian.org> ha scritto:
> >>
> >>
> >>>ok, postami da da ubuntu il risultato di questo comando:
> >>>
> >>>cat /etc/fstab
> >>>
> >>>
> >>ecco il risultato da ubuntu:
> >>root a romolo:/home/rombon # cat /etc/fstab
> >># /etc/fstab: static file system information.
> >>#
> >># <file system> <mount point>   <type>  <options>       <dump>  <pass>
> >>proc            /proc           proc    defaults        0       0
> >>/dev/hda6       /               ext3    defaults,errors=remount-ro 0       1
> >>/dev/hda5       none            swap    sw              0       0
> >>/dev/hdb6       none            swap    sw              0       0
> >>/dev/hdc        /media/cdrom0   udf,iso9660 ro,user,noauto  0       0
> >>/dev/hdd        /media/cdrom1   udf,iso9660 ro,user,noauto  0       0
> >>/dev/fd0        /media/floppy0  auto    rw,user,noauto  0       0
> >>/dev/hda1       /media/windows  ntfs    umask=0222      0       0
> >>root a romolo:/home/rombon #
> >>
> >>ora passo su Suse e ti invio un'altra mail
> >>
> >>
> >eccomi:
> >
> >linux:/home/romolo # cat /etc/fstab
> >/dev/hdf7            /                    reiserfs   acl,user_xattr        1 1
> >/dev/hdf5            /boot                ext2       acl,user_xattr        1 2
> >/dev/hdf1            /data1               auto       noauto,user           0 0
> >/dev/hdf11           /home                reiserfs   defaults              1 2
> >/dev/hdf9            /opt                 reiserfs   acl,user_xattr        1 2
> >/dev/hdf8            /usr                 reiserfs   acl,user_xattr        1 2
> >/dev/hdf10           /var                 reiserfs   acl,user_xattr        1 2
> >/dev/hde1            /windows/C           ntfs
> >ro,users,gid=users,umask=00
> >02,nls=utf8 0 0
> >/dev/hdf6            swap                 swap       pri=42                0 0
> >devpts               /dev/pts             devpts     mode=0620,gid=5       0 0
> >proc                 /proc                proc       defaults              0 0
> >usbfs                /proc/bus/usb        usbfs      noauto                0 0
> >sysfs                /sys                 sysfs      noauto                0 0
> >/dev/cdrecorder      /media/cdrecorder    subfs
> >fs=cdfss,ro,procuid,nosuid,
> >nodev,exec,iocharset=utf8 0 0
> >/dev/dvd             /media/dvd           subfs
> >fs=cdfss,ro,procuid,nosuid,
> >nodev,exec,iocharset=utf8 0 0
> >/dev/fd0             /media/floppy        subfs
> >fs=floppyfss,procuid,nodev,
> >nosuid,sync 0 0
> >/dev/cdrom           /media/cdrom         subfs
> >fs=cdfss,ro,procuid,nosuid,
> >nodev,exec,iocharset=utf8 0 0
> >/dev/dvdrecorder     /media/dvdrecorder   subfs
> >fs=cdfss,ro,procuid,nosuid,
> >nodev,exec,iocharset=utf8 0 0
> >linux:/home/romolo #
> >
> >
> >
> >
> >>>poi passa du suse e fai lo stesso
> >>>
> >>>cosí capisco meglio come č il tuo sistema
> >>>
> >>>ciao
> >>>MaX
> >>>
> >>>
> >>>Romolo Bonfante wrote:
> >>>
> >>>
> >>>
> >>>>Il 22/08/05, max<max a maximumdebian.org> ha scritto:
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>>Romolo Bonfante wrote:
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>>>>>mi da questa risposta:
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>""mount: il device speciale /dev/hdf11 non esiste""
> >>>>>>in effetti da ubuntu non vedo il secondo HD, (č tutto occupato da Suse 9.1),
> >>>>>>ripartito nel seguente modo
> >>>>>>
> >>>>>>
> >>>>>>/dev/hdf1 = auto/data1 - 0 byte
> >>>>>>/dev/hdf5 = 33 MB boot ext2
> >>>>>>/dev/hdf7 = 9,1 GB / =reiserf
> >>>>>>/dev/hdf8 = 9,6 GB /usr
> >>>>>>/dev/hdf9 = 5,8 GB /opt
> >>>>>>/dev/hdf10 = 4,8 GB /var
> >>>>>>/dev/hdf11 = 43,6 GB /home
> >>>>>>
> >>>>>>Nota: il login e la password dell'utente sono uguali con Suse e
> >>>>>>ubuntu, mentre con Suse c'č in piů la password di root diversa da
> >>>>>>quella dell'utente, spero di essermi spiegato bene!
> >>>>>>come devo procedere?
> >>>>>>grazie, Romolo
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>OK ti manca il dispositivo che andrebbe creato con mknod... ma ora non
> >>>>>ricorco la sisntassi.
> >>>>>
> >>>>>puoi comunque fare cosí:
> >>>>>
> >>>>>riavvia in suse e monta la root di ubuntu credo sia in /dev/hda1
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>Non sono sicuro, temo di sbagliare,
> >>>>in ubuntu in /dev/hda1 dovrei avere, se non sbaglio, la partiz. con
> >>>>w2k (in effetti w2k occupa 40 GB sulla prima partiz. di /hda)
> >>>>e poi le varie partiz create autom. da ubuntu: se apro la cartella
> >>>>/dev in ubuntu vedo:
> >>>>/hda /hda1 /hda3 /hda5 /hda6
> >>>>- e poi: /hdb /hdb1 /hdb10 /hdb11 /hdb2 /hdb5 /hdb6 /hdb7 /hdb8 /hdb9
> >>>>/hdb visto da ubuntu dovrebbe corrispondere al /hdf di Suse, dove la
> >>>>/hdf11 (/hdb11) č la home che mi interessa -
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>># mount -t ext3 /dev/hda1 /mnt   (ext3 oppure auto oppure il filesystem
> >>>>>usato)
> >>>>>
> >>>>># cp /dev/hdf* /mnt/dev/
> >>>>>
> >>>>># umount /mnt
> >>>>>
> >>>>># reboot  (in ubuntu)
> >>>>>
> >>>>>ricomincia daccapo, sarai piů fortunato :-)
> >>>>>
> >>>>>il fatto che nei due sistemi tu abbia dato lo stesso nome e passwd
> >>>>>all'utente non significa che siano uguali.
> >>>>>Unix per distinguere un utente da un altro usa il formato numerico, il
> >>>>>nome utente che noi vediamo in realtŕ e una maschera.
> >>>>>
> >>>>>dai una occhiata in /etc/group ed /etc/passwd
> >>>>>
> >>>>>ciao
> >>>>>MaX
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>>>>e controlla che in /mnt ci sia tutto
> >>>>>>>>
> >>>>>>>>č probabile che il userID e groupID di suse siano differenti dallo
> >>>>>>>>stessu utente in debian
> >>>>>>>>
> >>>>>>>>prova  dare un "ls -las /mnt/Romolo/
> >>>>>>>>
> >>>>>>>>dovrebbe darti qualche cosa simile a
> >>>>>>>>
> >>>>>>>>0 drwxr-xr-x    8 Romolo Romolo      272 Sep  6  2004 .nx
> >>>>>>>>0 drwx------    6 Romolo Romolo      204 Oct 16  2004 .ssh
> >>>>>>>>0 drwx------   23 Romolo Romolo      782 Oct 10  2004 .sylpheed
> >>>>>>>>0 drwx------    3 Romolo Romolo      102 Dec 17  2004 .w3m
> >>>>>>>>0 drwx------   38 Romolo Romolo     1292 Aug 22 15:27 Desktop
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>in questo caso sei a posto
> >>>>>>>>
> >>>>>>>>se invece ti appare qualche cosa tipo
> >>>>>>>>
> >>>>>>>>0 drwxr-xr-x    8 1004 1004      272 Sep  6  2004 .nx
> >>>>>>>>0 drwx------    6 1004 1004      204 Oct 16  2004 .ssh
> >>>>>>>>0 drwx------   23 1004 1004      782 Oct 10  2004 .sylpheed
> >>>>>>>>0 drwx------    3 1004 1004      102 Dec 17  2004 .w3m
> >>>>>>>>0 drwx------   38 1004 1004     1292 Aug 22 15:27 Desktop
> >>>>>>>>
> >>>>>>>>significa che il userID e groupID non esistono nel tuo sistema e devi
> >>>>>>>>creare un nuovo utente
> >>>>>>>>che abbia UID e GID 1004/1004 (numeri di esempio)
> >>>>>>>>
> >>>>>>>>una volta risolto questo puoi montare la tua home direttamente in /home
> >>>>>>>>
> >>>>>>>># umount /mnt
> >>>>>>>># mount -t auto /dev/hdf11 /home
> >>>>>>>>
> >>>>>>>>per renderlo automatico devi aggiungere in /etc/fstab
> >>>>>>>>
> >>>>>>>>/dev/hdf11      /home      ext3 defaults       0       0
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>ciao,
> >>>>>>>>
> >>>>>>>>come va ad imperia?  fai parte del GUGLI di imperia?
> >>>>>>>>
> >>>>>>>>ciao
> >>>>>>>>MaX
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>Grazie, appena posso provo!
> >>>>>>>ad IM molto bene, non faccio parte del GUGLI di IM, mi informerň.
> >>>>>>>saluti
> >>>>>>>Romolo
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>>Si possono installare le applicazioni KDE su ubuntu senza installare kubuntu?
> >>>>>>>>>
> >>>>>>>>>Come devo procedere per montare su ubuntu il 2° HD? (hdf).
> >>>>>>>>>
> >>>>>>>>>Chiedo gentilmente risposte adatte ad un principiante!. Grazie!
> >>>>>>>>>--
> >>>>>>>>>Romolo Bonfante
> >>>>>>>>>Imperia
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>______________________________________________
> >>>>>>>>Renovamos el Correo Yahoo!
> >>>>>>>>Nuevos servicios, más seguridad
> >>>>>>>>http://correo.yahoo.es
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>--
> >>>>>>>>ubuntu-it mailing list
> >>>>>>>>ubuntu-it a lists.ubuntu.com
> >>>>>>>>http://lists.ubuntu.com/mailman/listinfo/ubuntu-it
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>--
> >>>>>>>Romolo Bonfante
> >>>>>>>Imperia
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>______________________________________________
> >>>>>Renovamos el Correo Yahoo!
> >>>>>Nuevos servicios, más seguridad
> >>>>>http://correo.yahoo.es
> >>>>>
> >>>>>
> >>>>>--
> >>>>>ubuntu-it mailing list
> >>>>>ubuntu-it a lists.ubuntu.com
> >>>>>http://lists.ubuntu.com/mailman/listinfo/ubuntu-it
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>
> >>>
> >>>
> >>>______________________________________________
> >>>Renovamos el Correo Yahoo!
> >>>Nuevos servicios, más seguridad
> >>>http://correo.yahoo.es
> >>>
> >>>
> >>>--
> >>>ubuntu-it mailing list
> >>>ubuntu-it a lists.ubuntu.com
> >>>http://lists.ubuntu.com/mailman/listinfo/ubuntu-it
> >>>
> >>>
> >>>
> >>--
> >>Romolo Bonfante
> >>Imperia
> >>
> >>
> >>
> >
> >
> >
> >
> 
> 
> 
> ______________________________________________
> Renovamos el Correo Yahoo!
> Nuevos servicios, más seguridad
> http://correo.yahoo.es
> 
> 
> --
> ubuntu-it mailing list
> ubuntu-it a lists.ubuntu.com
> http://lists.ubuntu.com/mailman/listinfo/ubuntu-it
> 


-- 
Romolo Bonfante
Imperia



Maggiori informazioni sulla lista ubuntu-it