[ubuntu-in] tataindicom plug2surf jaunty

[Lokesh Chauhan]

I use NetworkManager applet for the same purpose.. hardly any issue..
Just go to "edit connections" and in mobile broadband do add " Tataindicom
Plug2surf " from existing options.
select auto connection to be active.
You will just have to plug in the usb to get it connected automatically.
Much less hassle than wvdial conf issues.

On Thu, Jun 18, 2009 at 3:40 PM, amachu <amachu at ubuntu.com> wrote:

>  Hi,
>
> It was working fine in Intrepid. Now in Jaunty,
>
> Plugging Tataindicom Plug2surf USB modem gets trapped as */dev/ttyACM0*
>
> Here are my /etc/wvdial.conf contents,
>
> *[Dialer Defaults]
> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> Modem Type = USB Modem
> Phone = #777
> ISDN = 0
> Username = internet
> Init1 = ATZ
> Password = internet
> Modem = /dev/ttyACM0
> Baud = 460800
>
> *Issuing a *'sudo wvdial'* command could not help connecting to Internet.
> Here is the log that gets repeated,
> *
> --> WvDial: Internet dialer version 1.60
> --> Cannot get information for serial port.
> --> Initializing modem.
> --> Sending: ATZ
> ATZ
> OK
> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> OK
> --> Modem initialized.
> --> Sending: ATDT#777
> --> Waiting for carrier.
> ATDT#777
> CONNECT
> --> Carrier detected.  Waiting for prompt.
> --> Connected, but carrier signal lost!  Retrying...
> --> Sending: ATDT#777
> --> Waiting for carrier.
> ATDT#777
> ....
> ....
> ....*
>
> Did anyone face similar problem with Jaunty? Any solution?
>
> Trying it with Network-manager didn't help either.
>
> --
>
> Sri Ramadoss M
>
>
> --
> ubuntu-in mailing list
> ubuntu-in at lists.ubuntu.com
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-in
>
>


-- 
$ emerge -uD life  (Upgrade life with dependencies)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://lists.ubuntu.com/archives/ubuntu-in/attachments/20090618/81ce1638/attachment.htm