Hali! Lenne egy elég nagy problémám: Nem működik a WinFast TV2000 XP RM tunerkártyám. Gugliztam egy csomót, de használhatót nem nagyon találtam, kivéve a <a href="http://linuxtv.org/v4lwiki/index.php/Leadtek_WinFast_2000"> http://linuxtv.org/v4lwiki/index.php/Leadtek_WinFast_2000</a> oldalt. A leírtak alapján le is futtattam az lspci parancsot, de nem volt az érzékeltek között a kártya, majd egy slot-al lejjebb tettem így már felismerze: 03:02.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 03:02.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) Az lspci -vn kimenete: 03:02.0 0400: 109e:036e (rev 11)         Subsystem: 107d:6609         Flags: bus master, medium devsel, latency 32, IRQ 20         Memory at ddafe000 (32-bit, prefetchable) [size=4K]         Capabilities: <access denied> 03:02.1 0480: 109e:0878 (rev 11)         Subsystem: 107d:6609         Flags: medium devsel, IRQ 20         Memory at ddaff000 (32-bit, prefetchable) [size=4K]         Capabilities: <access denied> Mint látható, valamiért megtagadja a hozzáférést. Miért? Hogy tudom megcsinálni? Ha esetleg kellene, melléklem a bootolás azon részét, ahol a TV kártyát ismeri fel: Jun 30 11:54:44 lacyc3-desktop kernel: [   63.019762] Linux video capture interface: v2.00 Jun 30 11:54:44 lacyc3-desktop kernel: [   63.329943] bttv: driver version 0.9.16 loaded Jun 30 11:54:44 lacyc3-desktop kernel: [   63.329949] bttv: using 8 buffers with 2080k (520 pages) each for capture Jun 30 11:54:44 lacyc3-desktop kernel: [   63.330061] bttv: Bt8xx card found (0). Jun 30 11:54:44 lacyc3-desktop kernel: [   63.330094] ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 18 (level, low) -> IRQ 20 Jun 30 11:54:44 lacyc3-desktop kernel: [   63.330110] bttv0: Bt878 (rev 17) at 0000:03:02.0, irq: 20, latency: 32, mmio: 0xddafe000 Jun 30 11:54:44 lacyc3-desktop kernel: [   63.330131] bttv0: detected: Leadtek TV 2000 XP [card=34], PCI subsystem ID is 107d:6609 Jun 30 11:54:44 lacyc3-desktop kernel: [   63.330135] bttv0: using: Leadtek WinFast 2000/ WinFast 2000 XP [card=34,autodetected] Jun 30 11:54:44 lacyc3-desktop kernel: [   63.330791] bttv0: using tuner=5 Jun 30 11:54:44 lacyc3-desktop kernel: [   63.330798] bttv0: i2c: checking for MSP34xx @ 0x80... not found Jun 30 11:54:44 lacyc3-desktop kernel: [   63.331621] bttv0: i2c: checking for TDA9875 @ 0xb0... not found Jun 30 11:54:44 lacyc3-desktop kernel: [   63.332449 ] bttv0: i2c: checking for TDA7432 @ 0x8a... not found Jun 30 11:54:44 lacyc3-desktop kernel: [   63.333280] bttv0: i2c: checking for TDA9887 @ 0x86... not found Jun 30 11:54:44 lacyc3-desktop kernel: [   63.364735] tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw]) Jun 30 11:54:44 lacyc3-desktop kernel: [   63.364788] tuner 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) Jun 30 11:54:44 lacyc3-desktop kernel: [   63.364793] tuner 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) Jun 30 11:54:44 lacyc3-desktop kernel: [   63.376590] bttv0: registered device video0 Jun 30 11:54:44 lacyc3-desktop kernel: [   63.376660] bttv0: registered device vbi0 Jun 30 11:54:44 lacyc3-desktop kernel: [   63.376743] bttv0: registered device radio0 Jun 30 11:54:44 lacyc3-desktop kernel: [   63.376770] bttv0: PLL: 28636363 => 35468950 .. ok Jun 30 11:54:44 lacyc3-desktop kernel: [   63.406171] input: bttv IR (card=34) as /class/input/input3 Jun 30 11:54:44 lacyc3-desktop kernel: [   63.412240] bt878: AUDIO driver version 0.0.0 loaded Jun 30 11:54:44 lacyc3-desktop kernel: [   63.412338] bt878: Bt878 AUDIO function found (0). Jun 30 11:54:44 lacyc3-desktop kernel: [   63.412362] ACPI: PCI Interrupt 0000:03:02.1[A] -> GSI 18 (level, low) -> IRQ 20 Jun 30 11:54:44 lacyc3-desktop kernel: [   63.412372] bt878_probe: card id=[0x6609107d], Unknown card. Jun 30 11:54:44 lacyc3-desktop kernel: [   63.412374] Exiting.. Jun 30 11:54:44 lacyc3-desktop kernel: [   63.412379] ACPI: PCI interrupt for device 0000:03:02.1 disabled Jun 30 11:54:44 lacyc3-desktop kernel: [   63.412385] bt878: probe of 0000:03:02.1 failed with error -22