<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta content="text/html;charset=ISO-8859-7" http-equiv="Content-Type"> </head> <body dir="ltr" bgcolor="#ffffff" text="#000000"> Απο αυτα τα παρακάτω βλεπο οτι εχει βρει τι κάρτα είναι , άρα λογικά θα πρέπει να λειτουργεί κανονικά , τωρα για τα 3 Δ ναι είναι λίγο νωρίς να λέμε , θέλει λίγο ψάξιμο , έχει κάνει πλήρεις update , all repositories is enabled ? <hr size="2" width="100%">[ 31.639945] agpgart: Detected VIA PM800/PN800/PM880/PN880 chipset [ 31.649968] agpgart: AGP aperture is 128M @ 0xa0000000 [ 45.060591] [drm] Initialized drm 1.1.0 20060810 [ 45.580968] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 21 [ 45.581781] [drm] Initialized via 2.11.1 20070202 on minor 0 [ 45.789539] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. [ 45.789568] agpgart: Device is in legacy mode, falling back to 2.x [ 45.789576] agpgart: Putting AGP V2 device at 0000:00:00.0 into 0x mode [ 45.789658] agpgart: Putting AGP V2 device at 0000:01:00.0 into 0x mode [ 62.841756] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. [ 62.842069] agpgart: Device is in legacy mode, falling back to 2.x [ 62.842217] agpgart: Putting AGP V2 device at 0000:00:00.0 into 0x mode [ 62.842436] agpgart: Putting AGP V2 device at 0000:01:00.0 into 0x mode <hr size="2" width="100%"> O/H g k έγραψε: <blockquote cite="mid:c4f11730807100446t6853b4e7rd28f67875ee83175@mail.gmail.com" type="cite">lspci chad@chad-laptop:~$ sudo lspci [sudo] password for chad: 00:00.0 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge 00:00.1 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge 00:00.2 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge 00:00.3 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge 00:00.4 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge 00:00.7 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge 00:06.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01) 00:09.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01) 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) 00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50) 00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80) 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74) 01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 02) chad@chad-laptop:~$ dmesg 3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 18 14:43:41 UTC 2008 (Ubuntu 2.6.24-19.34-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001bfef000 (usable) [ 0.000000] BIOS-e820: 000000001bff0000 - 000000001bffffc0 (ACPI data) [ 0.000000] BIOS-e820: 000000001bffffc0 - 000000001c000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 447MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 114671) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 114671 [ 0.000000] HighMem 114671 -> 114671 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 114671 [ 0.000000] On node 0 totalpages: 114671 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 863 pages used for memmap [ 0.000000] Normal zone: 109712 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xC00E6010 checksum 0 [ 0.000000] ACPI: RSDP 000E6010, 0014 (r0 OID_00) [ 0.000000] ACPI: RSDT 1BFFC3C0, 002C (r1 INSYDE FACP_000 100 0000 10200) [ 0.000000] ACPI: FACP 1BFFFB10, 0074 (r1 INSYDE FACP_000 100 0000 10200) [ 0.000000] ACPI: DSDT 1BFFC400, 3709 (r1 MTC___ 8650____ 1000 INTL 2002036) [ 0.000000] ACPI: FACS 1BFFFFC0, 0040 [ 0.000000] ACPI: APIC 1BFFFBA0, 005A (r1 INSYDE APIC_000 30303030 0000 10200) [ 0.000000] ACPI: DMI detected: Fujitsu Siemens [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:13 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1c000000:e3f80000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113776 [ 0.000000] Kernel command line: root=UUID=2bdb6d6d-a154-465d-bffb-6b5da495133c ro quiet splash linux resolution=1280x800 locale=el_GR [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Detected 1492.671 MHz processor. [ 9.736668] Console: colour VGA+ 80x25 [ 9.736675] console [tty0] enabled [ 9.736923] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 9.737219] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 9.751699] Memory: 442628k/458684k available (2177k kernel code, 15448k reserved, 1006k data, 368k init, 0k highmem) [ 9.751710] virtual kernel memory layout: [ 9.751711] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 9.751712] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 9.751714] vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB) [ 9.751715] lowmem : 0xc0000000 - 0xdbfef000 ( 447 MB) [ 9.751717] .init : 0xc0421000 - 0xc047d000 ( 368 kB) [ 9.751718] .data : 0xc0320434 - 0xc041bdc4 (1006 kB) [ 9.751720] .text : 0xc0100000 - 0xc0320434 (2177 kB) [ 9.751724] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 9.751773] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 9.831809] Calibrating delay using timer specific routine.. 2989.13 BogoMIPS (lpj=5978276) [ 9.831843] Security Framework initialized [ 9.831854] SELinux: Disabled at boot. [ 9.831873] AppArmor: AppArmor initialized [ 9.831879] Failure registering capabilities with primary security module. [ 9.831889] Mount-cache hash table entries: 512 [ 9.832051] Initializing cgroup subsys ns [ 9.832059] Initializing cgroup subsys cpuacct [ 9.832073] CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 9.832087] CPU: L1 I cache: 32K, L1 D cache: 32K [ 9.832090] CPU: L2 cache: 1024K [ 9.832094] CPU: After all inits, caps: afe9fbff 00000000 00000000 00002040 00000000 00000000 00000000 00000000 [ 9.832104] Compat vDSO mapped to ffffe000. [ 9.832119] Checking 'hlt' instruction... OK. [ 9.848319] SMP alternatives: switching to UP code [ 9.850643] Freeing SMP alternatives: 11k freed [ 9.850779] Early unpacking initramfs... done [ 10.256933] ACPI: Core revision 20070126 [ 10.257010] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 10.269153] CPU0: Intel(R) Celeron(R) M processor 1.50GHz stepping 08 [ 10.269185] Total of 1 processors activated (2989.13 BogoMIPS). [ 10.269939] ENABLING IO-APIC IRQs [ 10.270268] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 10.415895] Brought up 1 CPUs [ 10.415958] CPU0 attaching sched-domain: [ 10.415962] domain 0: span 01 [ 10.415964] groups: 01 [ 10.416175] net_namespace: 64 bytes [ 10.416187] Booting paravirtualized kernel on bare hardware [ 10.416733] Time: 11:35:07 Date: 07/10/08 [ 10.416768] NET: Registered protocol family 16 [ 10.416996] EISA bus registered [ 10.417032] ACPI: bus type pci registered [ 10.417199] PCI: PCI BIOS revision 2.10 entry at 0xe9c04, last bus=1 [ 10.417202] PCI: Using configuration type 1 [ 10.417219] Setting up standard PCI resources [ 10.419577] ACPI: EC: Look up EC in DSDT [ 10.422554] ACPI: Interpreter enabled [ 10.422558] ACPI: (supports S0 S1 S3 S4 S5) [ 10.422577] ACPI: Using IOAPIC for interrupt routing [ 10.424370] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 10.432830] ACPI: EC: GPE = 0x1, I/O: command/status = 0x66, data = 0x62 [ 10.432834] ACPI: EC: driver started in interrupt mode [ 10.432878] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 10.433691] PCI quirk: region 1000-107f claimed by vt8235 PM [ 10.433696] PCI quirk: region 1400-140f claimed by vt8235 SMB [ 10.434170] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 10.447250] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) [ 10.447356] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *7 10 11 14 15) [ 10.447452] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15) [ 10.447548] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 14 15) [ 10.447634] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 10.447720] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 10.447807] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 10.447900] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 10.448009] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled. [ 10.448127] ACPI: PCI Interrupt Link [ALKB] (IRQs 23) *11 [ 10.448282] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *5, disabled. [ 10.448368] ACPI Error (uteval-0290): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node d9cc8678), AE_TYPE [ 10.448378] ACPI Error (uteval-0296): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20070126] [ 10.448385] ACPI Exception (pci_link-0282): AE_TYPE, Evaluating _CRS [20070126] [ 10.448388] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0 [ 10.448497] Linux Plug and Play Support v0.97 (c) Adam Belay [ 10.448532] pnp: PnP ACPI init [ 10.448541] ACPI: bus type pnp registered [ 10.453072] pnp: PnP ACPI: found 9 devices [ 10.453074] ACPI: ACPI bus type pnp unregistered [ 10.453079] PnPBIOS: Disabled by ACPI PNP [ 10.453327] PCI: Using ACPI for IRQ routing [ 10.453331] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 10.467869] NET: Registered protocol family 8 [ 10.467872] NET: Registered protocol family 20 [ 10.467953] AppArmor: AppArmor Filesystem Enabled [ 10.471845] Time: tsc clocksource has been installed. [ 10.479891] system 00:05: iomem range 0xe0000-0xfffff could not be reserved [ 10.479895] system 00:05: iomem range 0xfff80000-0xffffffff could not be reserved [ 10.479899] system 00:05: iomem range 0xfec00000-0xfec00fff has been reserved [ 10.479902] system 00:05: iomem range 0xfee00000-0xfee00fff has been reserved [ 10.479909] system 00:07: ioport range 0x330-0x331 has been reserved [ 10.479913] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 10.479916] system 00:07: ioport range 0x1000-0x107f has been reserved [ 10.479919] system 00:07: ioport range 0x1400-0x140f has been reserved [ 10.510398] PCI: Bridge: 0000:00:01.0 [ 10.510402] IO window: c000-dfff [ 10.510407] MEM window: c0000000-cfffffff [ 10.510412] PREFETCH window: 90000000-9fffffff [ 10.510418] PCI: Bus 2, cardbus bridge: 0000:00:09.0 [ 10.510420] IO window: 00001800-000018ff [ 10.510425] IO window: 00001c00-00001cff [ 10.510430] PREFETCH window: 20000000-23ffffff [ 10.510435] MEM window: 24000000-27ffffff [ 10.510460] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 10.510479] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 10.510499] NET: Registered protocol family 2 [ 10.547924] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 10.548150] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 10.548283] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 10.548432] TCP: Hash tables configured (established 16384 bind 16384) [ 10.548436] TCP reno registered [ 10.560021] checking if image is initramfs... it is [ 11.011877] Switched to high resolution mode on CPU 0 [ 11.364253] Freeing initrd memory: 7320k freed [ 11.365073] audit: initializing netlink socket (disabled) [ 11.365096] audit(1215689707.500:1): initialized [ 11.367563] VFS: Disk quotas dquot_6.5.1 [ 11.367660] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 11.367884] io scheduler noop registered [ 11.367887] io scheduler anticipatory registered [ 11.367890] io scheduler deadline registered [ 11.367906] io scheduler cfq registered (default) [ 11.367927] PCI: VIA PCI bridge detected. Disabling DAC. [ 11.367989] Boot video device is 0000:01:00.0 [ 11.368325] isapnp: Scanning for PnP cards... [ 11.722747] isapnp: No Plug & Play device found [ 11.755717] Real Time Clock Driver v1.12ac [ 11.755862] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 11.757256] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 11.757343] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 11.757465] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 11.769928] i8042.c: Detected active multiplexing controller, rev 1.1. [ 11.775775] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 11.775781] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 11.775784] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 11.775787] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 11.775789] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 11.787809] mice: PS/2 mouse device common for all mice [ 11.787942] EISA: Probing bus 0 at eisa.0 [ 11.787952] Cannot allocate resource for EISA slot 1 [ 11.787986] EISA: Detected 0 cards. [ 11.787989] cpuidle: using governor ladder [ 11.787992] cpuidle: using governor menu [ 11.788123] NET: Registered protocol family 1 [ 11.788158] Using IPI No-Shortcut mode [ 11.788202] registered taskstats version 1 [ 11.788323] Magic number: 0:950:579 [ 11.788520] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 11.788523] EDD information not available. [ 11.788814] Freeing unused kernel memory: 368k freed [ 11.799808] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 13.036625] fuse init (API version 7.9) [ 13.062468] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 13.062476] ACPI: Processor [CPU0] (supports 16 throttling states) [ 13.887666] usbcore: registered new interface driver usbfs [ 13.887700] usbcore: registered new interface driver hub [ 13.907327] usbcore: registered new device driver usb [ 13.951301] SCSI subsystem initialized [ 13.959978] USB Universal Host Controller Interface driver v3.0 [ 13.960216] ACPI Error (uteval-0290): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node d9cc8678), AE_TYPE [ 13.960227] ACPI Error (uteval-0296): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20070126] [ 13.960234] ACPI Exception (pci_link-0282): AE_TYPE, Evaluating _CRS [20070126] [ 13.960239] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off [ 13.960244] ACPI: Invalid IRQ link routing entry [ 13.960246] ACPI: Unable to derive IRQ for device 0000:00:10.0 [ 13.960248] ACPI: PCI Interrupt 0000:00:10.0[A]: no GSI - using IRQ 11 [ 13.960278] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 13.960850] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 13.960891] uhci_hcd 0000:00:10.0: irq 11, io base 0x00001200 [ 13.961069] usb usb1: configuration #1 chosen from 1 choice [ 13.961100] hub 1-0:1.0: USB hub found [ 13.961108] hub 1-0:1.0: 2 ports detected [ 14.044596] libata version 3.00 loaded. [ 14.059581] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 14.063827] ACPI Error (uteval-0290): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node d9cc8678), AE_TYPE [ 14.063840] ACPI Error (uteval-0296): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20070126] [ 14.063847] ACPI Exception (pci_link-0282): AE_TYPE, Evaluating _CRS [20070126] [ 14.063851] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off [ 14.063856] ACPI: Invalid IRQ link routing entry [ 14.063858] ACPI: Unable to derive IRQ for device 0000:00:10.1 [ 14.063861] ACPI: PCI Interrupt 0000:00:10.1[B]: no GSI - using IRQ 7 [ 14.063891] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 14.063940] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [ 14.063979] uhci_hcd 0000:00:10.1: irq 7, io base 0x00001220 [ 14.064116] usb usb2: configuration #1 chosen from 1 choice [ 14.064145] hub 2-0:1.0: USB hub found [ 14.064152] hub 2-0:1.0: 2 ports detected [ 14.167828] ACPI Error (uteval-0290): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node d9cc8678), AE_TYPE [ 14.167841] ACPI Error (uteval-0296): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20070126] [ 14.167848] ACPI Exception (pci_link-0282): AE_TYPE, Evaluating _CRS [20070126] [ 14.167853] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off [ 14.167858] ACPI: Invalid IRQ link routing entry [ 14.167860] ACPI: Unable to derive IRQ for device 0000:00:10.2 [ 14.167862] ACPI: PCI Interrupt 0000:00:10.2[C]: no GSI - using IRQ 5 [ 14.167892] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 14.167925] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [ 14.167963] uhci_hcd 0000:00:10.2: irq 5, io base 0x00001240 [ 14.168101] usb usb3: configuration #1 chosen from 1 choice [ 14.168138] hub 3-0:1.0: USB hub found [ 14.168145] hub 3-0:1.0: 2 ports detected [ 14.271895] PCI: Enabling device 0000:00:10.3 (0000 -> 0002) [ 14.272034] ACPI Error (uteval-0290): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node d9cc8678), AE_TYPE [ 14.272044] ACPI Error (uteval-0296): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20070126] [ 14.272051] ACPI Exception (pci_link-0282): AE_TYPE, Evaluating _CRS [20070126] [ 14.272056] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off [ 14.272061] ACPI: Invalid IRQ link routing entry [ 14.272063] ACPI: Unable to derive IRQ for device 0000:00:10.3 [ 14.272065] ACPI: PCI Interrupt 0000:00:10.3[D]: no GSI - using IRQ 10 [ 14.272099] ehci_hcd 0000:00:10.3: EHCI Host Controller [ 14.272132] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [ 14.272199] ehci_hcd 0000:00:10.3: irq 10, io mem 0x28011000 [ 14.283538] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 14.283693] usb usb4: configuration #1 chosen from 1 choice [ 14.283725] hub 4-0:1.0: USB hub found [ 14.283734] hub 4-0:1.0: 6 ports detected [ 14.388016] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 11, using IRQ 23 [ 14.388022] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 23 [ 14.388032] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKB] -> GSI 23 (level, low) -> IRQ 17 [ 14.392288] eth0: VIA Rhine II at 0xd0000000, 00:40:d0:86:8e:eb, IRQ 17. [ 14.393003] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. [ 14.393188] ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug [ 14.393238] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20 [ 14.393241] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 [ 14.393245] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 18 [ 14.393300] ACPI: PCI interrupt for device 0000:00:11.1 disabled [ 14.397289] pata_via 0000:00:11.1: version 0.3.3 [ 14.397323] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 18 [ 14.398211] scsi0 : pata_via [ 14.398868] scsi1 : pata_via [ 14.401414] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14 [ 14.401418] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15 [ 14.564066] ata1.00: ATA-7: FUJITSU MHV2060AT, 000000A0, max UDMA/100 [ 14.564072] ata1.00: 117210240 sectors, multi 16: LBA [ 14.579952] ata1.00: configured for UDMA/100 [ 14.899880] ata2.00: ATAPI: HL-DT-ST DVD-RW GWA-4082N, CW02, max UDMA/33 [ 15.071737] ata2.00: configured for UDMA/33 [ 15.071918] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2060A 0000 PQ: 0 ANSI: 5 [ 15.075723] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RW GWA-4082N CW02 PQ: 0 ANSI: 5 [ 15.090909] Driver 'sd' needs updating - please use bus_type methods [ 15.091035] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 15.091050] sd 0:0:0:0: [sda] Write Protect is off [ 15.091053] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.091072] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.091132] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 15.091143] sd 0:0:0:0: [sda] Write Protect is off [ 15.091146] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.091163] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.091168] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 15.166767] sda1 sda2 < sda5 > [ 15.195474] sd 0:0:0:0: [sda] Attached SCSI disk [ 15.203009] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 15.203035] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 15.218140] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 15.218147] Uniform CD-ROM driver Revision: 3.20 [ 15.218216] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 15.507486] Attempting manual resume [ 15.507492] swsusp: Resume From Partition 8:5 [ 15.507494] PM: Checking swsusp image. [ 15.507733] PM: Resume from disk failed. [ 15.566034] kjournald starting. Commit interval 5 seconds [ 15.566053] EXT3-fs: mounted filesystem with ordered data mode. [ 26.381371] ath_hal: module license 'Proprietary' taints kernel. [ 26.470537] ath_hal: <a moz-do-not-send="true" href="http://0.9.18.0">MailScanner warning: numerical links are often malicious: 0.9.18.0</a> (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) [ 26.778543] wlan: 0.9.4 [ 26.985778] Yenta: CardBus bridge found at 0000:00:09.0 [1734:10ab] [ 26.985805] Yenta: Using CSCINT to route CSC interrupts to PCI [ 26.985807] Yenta: Routing CardBus interrupts to PCI [ 26.985813] Yenta TI: socket 0000:00:09.0, mfunc 0x01001002, devctl 0x44 [ 27.057173] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 27.214868] Yenta: ISA IRQ mask 0x0058, PCI irq 16 [ 27.214875] Socket status: 30000006 [ 27.270477] Linux agpgart interface v0.102 [ 27.326695] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 27.466494] ath_pci: 0.9.4 [ 27.466571] PCI: Enabling device 0000:00:06.0 (0000 -> 0002) [ 27.466585] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 28.122417] irda_init() [ 28.122449] NET: Registered protocol family 23 [ 28.314524] input: Power Button (FF) as /devices/virtual/input/input2 [ 28.326379] ACPI: Power Button (FF) [PWRF] [ 28.326513] input: Lid Switch as /devices/virtual/input/input3 [ 28.330090] ACPI: Lid Switch [LID] [ 28.330184] input: Sleep Button (CM) as /devices/virtual/input/input4 [ 28.342361] ACPI: Sleep Button (CM) [SBTN] [ 28.342448] input: Power Button (CM) as /devices/virtual/input/input5 [ 28.358354] ACPI: Power Button (CM) [PBTN] [ 28.509849] ACPI: Battery Slot [BAT0] (battery present) [ 28.569905] ACPI: AC Adapter [AC] (on-line) [ 28.882467] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 29.726664] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input7 [ 29.742248] ACPI: Video Device [VGA0] (multi-head: yes rom: no post: no) [ 31.412059] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps: 0xa04713/0x0 [ 31.525719] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input8 [ 31.621384] ath_rate_sample: 1.2 (0.9.4) [ 31.621939] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 31.621946] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 31.621956] wifi0: H/W encryption support: WEP AES AES_CCM TKIP [ 31.621960] wifi0: mac 7.8 phy 4.5 radio 5.6 [ 31.621965] wifi0: Use hw queue 1 for WME_AC_BE traffic [ 31.621967] wifi0: Use hw queue 0 for WME_AC_BK traffic [ 31.621970] wifi0: Use hw queue 2 for WME_AC_VI traffic [ 31.621972] wifi0: Use hw queue 3 for WME_AC_VO traffic [ 31.621975] wifi0: Use hw queue 8 for CAB traffic [ 31.621977] wifi0: Use hw queue 9 for beacons [ 31.639416] wifi0: Atheros 5212: mem=0x28000000, irq=19 [ 31.639945] agpgart: Detected VIA PM800/PN800/PM880/PN880 chipset [ 31.649968] agpgart: AGP aperture is 128M @ 0xa0000000 [ 31.650495] ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug [ 31.650629] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 5, using IRQ 22 [ 31.650633] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [ 31.650642] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 20 [ 31.650794] PCI: Setting latency timer of device 0000:00:11.5 to 64 [ 32.174067] ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 20 [ 32.178049] PCI: Setting latency timer of device 0000:00:11.6 to 64 [ 32.930466] cs: IO port probe 0x100-0x3af: clean. [ 32.932595] cs: IO port probe 0x3e0-0x4ff: clean. [ 32.933496] cs: IO port probe 0x820-0x8ff: clean. [ 32.934257] cs: IO port probe 0xc00-0xcf7: clean. [ 32.935183] cs: IO port probe 0xa00-0xaff: clean. [ 34.178500] lp: driver loaded but no devices found [ 34.416967] Adding 1317288k swap on /dev/sda5. Priority:-1 extents:1 across:1317288k [ 34.970618] EXT3 FS on sda1, internal journal [ 36.310640] ip_tables: (C) 2000-2006 Netfilter Core Team [ 38.214942] No dock devices found. [ 39.691408] apm: BIOS not found. [ 39.889455] ppdev: user-space parallel port driver [ 40.068891] audit(1215689737.069:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4804 profile="/usr/sbin/cupsd" namespace="default" [ 42.195722] eth0: link down [ 42.354126] Bluetooth: Core ver 2.11 [ 42.355253] NET: Registered protocol family 31 [ 42.355258] Bluetooth: HCI device and connection manager initialized [ 42.355264] Bluetooth: HCI socket layer initialized [ 42.381247] Bluetooth: L2CAP ver 2.9 [ 42.381255] Bluetooth: L2CAP socket layer initialized [ 42.464994] Bluetooth: RFCOMM socket layer initialized [ 42.465017] Bluetooth: RFCOMM TTY layer initialized [ 42.465019] Bluetooth: RFCOMM ver 1.8 [ 45.060591] [drm] Initialized drm 1.1.0 20060810 [ 45.580968] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 21 [ 45.581781] [drm] Initialized via 2.11.1 20070202 on minor 0 [ 45.789539] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. [ 45.789568] agpgart: Device is in legacy mode, falling back to 2.x [ 45.789576] agpgart: Putting AGP V2 device at 0000:00:00.0 into 0x mode [ 45.789658] agpgart: Putting AGP V2 device at 0000:01:00.0 into 0x mode [ 62.841756] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. [ 62.842069] agpgart: Device is in legacy mode, falling back to 2.x [ 62.842217] agpgart: Putting AGP V2 device at 0000:00:00.0 into 0x mode [ 62.842436] agpgart: Putting AGP V2 device at 0000:01:00.0 into 0x mode [ 90.342541] NET: Registered protocol family 10 [ 90.343136] lo: Disabled Privacy Extensions [ 90.343814] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 101.332234] ath0: no IPv6 routers present [ 221.124478] ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready [ 221.188728] NET: Registered protocol family 17 [ 232.049231] ath0: no IPv6 routers present [ 243.268683] ath0: no IPv6 routers present chad@chad-laptop:~$ lsmod chad@chad-laptop:~$ sudo lsmod Module Size Used by af_packet 23812 4 ipv6 267780 8 binfmt_misc 12808 1 via 43648 2 drm 82452 3 via rfcomm 41744 2 l2cap 25728 13 rfcomm bluetooth 61156 4 rfcomm,l2cap ppdev 10372 0 cpufreq_conservative 8712 0 cpufreq_stats 7104 0 cpufreq_ondemand 9740 0 cpufreq_userspace 5284 0 freq_table 5536 2 cpufreq_stats,cpufreq_ondemand cpufreq_powersave 2688 0 container 5632 0 sbs 15112 0 sbshc 7680 1 sbs dock 11280 0 iptable_filter 3840 0 ip_tables 14820 1 iptable_filter x_tables 16132 1 ip_tables parport_pc 36260 0 lp 12324 0 parport 37832 3 ppdev,parport_pc,lp joydev 13120 0 pcmcia 40876 0 i2c_viapro 9876 0 i2c_core 24832 1 i2c_viapro wlan_scan_sta 14720 1 ath_rate_sample 14336 1 evdev 13056 7 serio_raw 7940 0 psmouse 40336 0 snd_via82xx_modem 16264 0 snd_seq_dummy 4868 0 video 19856 0 snd_via82xx 29464 3 output 4736 1 video gameport 16008 1 snd_via82xx snd_ac97_codec 101028 2 snd_via82xx_modem,snd_via82xx ac97_bus 3072 1 snd_ac97_codec snd_pcm_oss 42144 0 snd_mixer_oss 17920 1 snd_pcm_oss snd_pcm 78596 4 snd_via82xx_modem,snd_via82xx,snd_ac97_codec,snd_pcm_oss snd_mpu401_uart 9728 1 snd_via82xx snd_seq_oss 35584 0 snd_seq_midi 9376 0 snd_seq_midi_event 8320 2 snd_seq_oss,snd_seq_midi pcspkr 4224 0 snd_rawmidi 25760 2 snd_mpu401_uart,snd_seq_midi snd_seq 54224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 24836 2 snd_pcm,snd_seq snd_seq_device 9612 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq ac 6916 0 battery 14212 0 via_ircc 27796 0 button 9232 0 snd 56996 19 snd_via82xx_modem,snd_seq_dummy,snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device via_agp 11136 1 irda 203068 1 via_ircc snd_page_alloc 11400 3 snd_via82xx_modem,snd_via82xx,snd_pcm ath_pci 101024 0 soundcore 8800 1 snd agpgart 34760 2 drm,via_agp crc_ccitt 3072 1 irda shpchp 34452 0 pci_hotplug 30880 1 shpchp yenta_socket 27276 1 rsrc_nonstatic 13696 1 yenta_socket pcmcia_core 40596 3 pcmcia,yenta_socket,rsrc_nonstatic wlan 207728 4 wlan_scan_sta,ath_rate_sample,ath_pci ath_hal 192592 3 ath_rate_sample,ath_pci ext3 136712 1 jbd 48404 1 ext3 mbcache 9600 1 ext3 sg 36880 0 sr_mod 17956 0 cdrom 37408 1 sr_mod sd_mod 30720 3 ata_generic 8324 0 pata_via 13316 2 pata_acpi 8320 0 via_rhine 26632 0 mii 6400 1 via_rhine libata 159344 3 ata_generic,pata_via,pata_acpi ehci_hcd 37900 0 uhci_hcd 27024 0 scsi_mod 151436 4 sg,sr_mod,sd_mod,libata usbcore 146028 3 ehci_hcd,uhci_hcd thermal 16796 0 processor 36872 2 thermal fan 5636 0 fbcon 42912 0 tileblit 3456 1 fbcon font 9472 1 fbcon bitblit 6784 1 fbcon softcursor 3072 1 bitblit fuse 50580 3 chad@chad-laptop:~$ <div class="gmail_quote">Στις 10 Ιούλιος 2008 2:26 μμ,ο χρήστης Tsabolov Sergey <<a moz-do-not-send="true" href="mailto:econlab@uom.gr">econlab@uom.gr</a>> έγραψε: <blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;"> <div dir="ltr" bgcolor="#ffffff" text="#000000"> Αφού τον άλλαξες με το χέρι αυτό έχει να κάνει με την κάρτα γραφικών , αν είναι onboard τότε έχουμε μικρό πρόβλημα , κάρτες υπάρχουν ακόμα και παλιές έστω με 64 μβ και δεν είναι πρόβλημα να τις βρεις , αν ήτανε μόνο αυτό πρόβλημα το λύνουμε βάζοντας μια κάρτα και τότε θα έχει και 3D και φωτιές και βροχές και όλα τα καλούδια . <div class="Ih2E3d"> O/H g k έγραψε: </div> <div class="Ih2E3d"> <blockquote type="cite">Το δοκίμασα αυτό δεν δουλεψε στο 8.04 τον xorg τον άλλαξα με το χέρι <div class="gmail_quote">Στις 10 Ιούλιος 2008 1:52 μμ,ο χρήστης Tsabolov Sergey <<a moz-do-not-send="true" href="mailto:econlab@uom.gr" target="_blank">econlab@uom.gr</a>> έγραψε: <blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;"> <div dir="ltr" bgcolor="#ffffff" text="#000000"> <a moz-do-not-send="true" href="https://help.ubuntu.com/community/OpenChrome" target="_blank">https://help.ubuntu.com/community/OpenChrome</a> Όπως λέμε στο Λίνουξ δεν υπάρχει πρόβλημα χωρίς λύση οπότε πάρε στα χέρια σου το Η/Υ και βλέπουμε άσχετα τι chip έχει θα δούμε μετά . <div> O/H g k έγραψε: <blockquote type="cite">Δυστυχώς όλα επάνω ειναι τσιπάκια via και εκεί είναι το πρόβλημα στην κοινότητα έχουν ανοίξει project ειδικά για το θέμα αυτό <a moz-do-not-send="true" href="http://www.openchrome.org/" target="_blank">http://www.openchrome.org/</a> λίγοι όμως έχουν καταφέρει να συνθέσουν τους οδηγούς με επιτυχία <div class="gmail_quote">Στις 10 Ιούλιος 2008 1:33 μμ,ο χρήστης Tsabolov Sergey <<a moz-do-not-send="true" href="mailto:econlab@uom.gr" target="_blank">econlab@uom.gr</a>> έγραψε: <blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;"> <div dir="ltr" bgcolor="#ffffff" text="#000000"> Αν μιλάμε για μητρική δεν νομίζω ότι θα έχει μεγάλο πρόβλημα για 3D κτλ να έχει μία κάρτα έστω 64 MB nvidia αρκεί . τα υπόλοιπα βλέπουμε . <div> O/H g k έγραψε: <blockquote type="cite">Μητρική είναι μόλις μου έρθει το μηχάνημα θα στείλω τα logs κατάφερα πολλές απο τις ρυθμίσεις αλλα απο ότι είδα και στην κοινότητα υπάρχει πρόβλημα με τους οδηγούς αυτο που δέν μπορώ είναι τα τρισδιάστατα αλλά απο ότι βλέπω το μοντέλο είναι σπάνιο ειδικά μέσα στην κοινότητα ;-0) ο κάτοχος είναι 15 ετών και δεν θέλω να απογοητευτεί απο την πρώτη επαφή του με τα λίνουξ.Ευχαριστώ...!!! <div class="gmail_quote">Στις 10 Ιούλιος 2008 12:30 μμ,ο χρήστης Tsabolov Sergey <<a moz-do-not-send="true" href="mailto:econlab@uom.gr" target="_blank">econlab@uom.gr</a>> έγραψε: <blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;"> <div dir="ltr" bgcolor="#ffffff" text="#000000"> Λίγα στοιχεία του μηχανήματος θα ήτανε καλό να δώσεις VIA είναι VGA card ? Από τερματικό , έγραψε όλα αυτά . lspci dmesg lsmod <div> O/H g k έγραψε: </div> <blockquote type="cite">Προσπαθώντας να μπολιάσω ένα ακόμα μηχάνημα amilo L7310W με Ubuntu 8.04 τράκαρα με την καθόλου φιλική VIA ο γούγλης δεν βοηθάει πολύ υπάρχει κάποιος μεταξύ μας που έχει αντιμετωπίσει αυτό το προβλημα??? </blockquote> </div> </blockquote> </div> </blockquote> </div> </div> </blockquote> </div> </blockquote> </div> </div> </blockquote> </div> </blockquote> </div> </div> </blockquote> </div> </blockquote> </body> </html>