enabled [ 29.724359] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 29.724832] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 29.725692] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 29.725742] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 29.725818] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 29.726117] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 29.726121] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 29.742254] mice: PS/2 mouse device common for all mice [ 29.742351] EISA: Probing bus 0 at eisa.0 [ 29.742361] Cannot allocate resource for EISA slot 4 [ 29.742370] EISA: Detected 0 cards. [ 29.742372] cpuidle: using governor ladder [ 29.742374] cpuidle: using governor menu [ 29.742445] NET: Registered protocol family 1 [ 29.742466] Using IPI No-Shortcut mode [ 29.742497] registered taskstats version 1 [ 29.742598] Magic number: 8:844:123 [ 29.742751] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 29.742752] EDD information not available. [ 29.743004] Freeing unused kernel memory: 364k freed [ 29.760839] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 30.933325] fuse init (API version 7.9) [ 30.945726] ACPI: Fan [FAN] (on) [ 30.951427] ACPI: Thermal Zone [THRM] (40 C) [ 31.264299] usbcore: registered new interface driver usbfs [ 31.264321] usbcore: registered new interface driver hub [ 31.264768] usbcore: registered new device driver usb [ 31.266296] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 31.266583] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 31.266591] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 16 [ 31.266601] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 31.266603] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 31.266946] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 31.266960] ohci_hcd 0000:00:02.0: irq 16, io mem 0xfe02f000 [ 31.286941] SCSI subsystem initialized [ 31.309896] libata version 3.00 loaded. [ 31.324803] usb usb1: configuration #1 chosen from 1 choice [ 31.324824] hub 1-0:1.0: USB hub found [ 31.324830] hub 1-0:1.0: 9 ports detected [ 31.430793] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 31.431065] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 31.431073] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 17 [ 31.431079] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 31.734324] usb 1-1: new full speed USB device using ohci_hcd and address 2 [ 31.934389] usb 1-1: configuration #1 chosen from 1 choice [ 31.950460] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x1374 @ 0, addr 00:1e:8c:1b:36:85 [ 31.950465] forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3 [ 31.951857] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 [ 31.951864] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 21 (level, low) -> IRQ 18 [ 31.951876] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 31.951878] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 31.951900] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 31.951922] ehci_hcd 0000:00:02.1: debug port 1 [ 31.951925] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 31.951933] ehci_hcd 0000:00:02.1: irq 18, io mem 0xfe02e000 [ 31.964220] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 31.964289] usb usb2: configuration #1 chosen from 1 choice [ 31.964304] hub 2-0:1.0: USB hub found [ 31.964310] hub 2-0:1.0: 9 ports detected [ 32.068544] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 32.068553] ACPI: PCI Interrupt 0000:01:01.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 19 [ 32.121202] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fdeff000-fdeff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 32.134844] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 32.135154] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20 [ 32.135161] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20 [ 32.135175] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 32.135180] ACPI: PCI interrupt for device 0000:00:07.0 disabled [ 32.135418] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23 [ 32.135420] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 16 [ 32.135432] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 32.135437] ACPI: PCI interrupt for device 0000:00:08.0 disabled [ 32.139332] pata_amd 0000:00:06.0: version 0.3.10 [ 32.139375] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 32.140904] scsi0 : pata_amd [ 32.141045] scsi1 : pata_amd [ 32.141579] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe800 irq 14 [ 32.141582] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe808 irq 15 [ 32.311995] ata1.00: ATA-5: WDC WD400BB-00CAA0, 16.06V16, max UDMA/100 [ 32.311998] ata1.00: 78165360 sectors, multi 1: LBA [ 32.312957] ata1.01: ATA-6: WDC WD800JB-00ETA0, 77.07W77, max UDMA/100 [ 32.312959] ata1.01: 156301488 sectors, multi 1: LBA48 [ 32.327926] ata1.00: configured for UDMA/100 [ 32.344010] ata1.01: configured for UDMA/100 [ 32.379870] usb 1-1: USB disconnect, address 2 [ 32.670824] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4040B, A304, max UDMA/33 [ 32.684414] ata2.01: ATA-7: WDC WD2500JB-00REA0, 20.00K20, max UDMA/100 [ 32.684416] ata2.01: 488397168 sectors, multi 1: LBA48 [ 32.854588] ata2.00: configured for UDMA/33 [ 32.862706] ata2.01: configured for UDMA/100 [ 32.862794] scsi 0:0:0:0: Direct-Access ATA WDC WD400BB-00CA 16.0 PQ: 0 ANSI: 5 [ 32.863096] scsi 0:0:1:0: Direct-Access ATA WDC WD800JB-00ET 77.0 PQ: 0 ANSI: 5 [ 32.868277] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4040B A304 PQ: 0 ANSI: 5 [ 32.868480] scsi 1:0:1:0: Direct-Access ATA WDC WD2500JB-00R 20.0 PQ: 0 ANSI: 5 [ 32.868630] sata_nv 0000:00:07.0: version 3.5 [ 32.868641] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20 [ 32.868645] sata_nv 0000:00:07.0: Using ADMA mode [ 32.868681] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 32.869527] scsi2 : sata_nv [ 32.869930] scsi3 : sata_nv [ 32.870065] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 20 [ 32.870067] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 20 [ 32.874674] Driver 'sd' needs updating - please use bus_type methods [ 32.874755] sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB) [ 32.874765] sd 0:0:0:0: [sda] Write Protect is off [ 32.874766] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 32.874779] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 32.874815] sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB) [ 32.874821] sd 0:0:0:0: [sda] Write Protect is off [ 32.874823] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 32.874832] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 32.874835] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 32.889713] sda1 [ 32.889967] sd 0:0:0:0: [sda] Attached SCSI disk [ 32.890098] sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) [ 32.890107] sd 0:0:1:0: [sdb] Write Protect is off [ 32.890109] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 32.890120] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 32.890158] sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) [ 32.890164] sd 0:0:1:0: [sdb] Write Protect is off [ 32.890165] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 32.890175] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 32.890177] sdb: sdb1 sdb2 < sdb5 > [ 32.939200] sd 0:0:1:0: [sdb] Attached SCSI disk [ 32.951482] sd 1:0:1:0: [sdc] 488397168 512-byte hardware sectors (250059 MB) [ 32.955112] sd 1:0:1:0: [sdc] Write Protect is off [ 32.955114] sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00 [ 32.961023] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 32.961063] sd 1:0:1:0: [sdc] 488397168 512-byte hardware sectors (250059 MB) [ 32.961069] sd 1:0:1:0: [sdc] Write Protect is off [ 32.961071] sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00 [ 32.961080] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 32.961083] sdc:sr0: scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw xa/form2 cdda tray [ 32.961148] Uniform CD-ROM driver Revision: 3.20 [ 32.961178] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 32.967257] sdc1 [ 32.967292] sd 1:0:1:0: [sdc] Attached SCSI disk [ 32.976390] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 32.976405] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 32.976418] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 32.976431] sd 1:0:1:0: Attached scsi generic sg3 type 0 [ 33.179144] ata3: SATA link down (SStatus 0 SControl 300) [ 33.227107] usb 2-4: new high speed USB device using ehci_hcd and address 4 [ 33.313840] Attempting manual resume [ 33.313843] swsusp: Resume From Partition 8:21 [ 33.313844] PM: Checking swsusp image. [ 33.315112] PM: Resume from disk failed. [ 33.355639] kjournald starting. Commit interval 5 seconds [ 33.356753] EXT3-fs: mounted filesystem with ordered data mode. [ 33.360346] usb 2-4: configuration #1 chosen from 1 choice [ 33.360587] hub 2-4:1.0: USB hub found [ 33.360715] hub 2-4:1.0: 4 ports detected [ 33.403018] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80001749eec] [ 33.490867] ata4: SATA link down (SStatus 0 SControl 300) [ 33.490909] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 16 [ 33.490913] sata_nv 0000:00:08.0: Using ADMA mode [ 33.490954] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 33.491034] scsi4 : sata_nv [ 33.491081] scsi5 : sata_nv [ 33.491209] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc000 irq 16 [ 33.491211] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc008 irq 16 [ 33.804483] ata5: SATA link down (SStatus 0 SControl 300) [ 34.006408] usb 1-1: new full speed USB device using ohci_hcd and address 3 [ 34.112208] ata6: SATA link down (SStatus 0 SControl 300) [ 34.230476] usb 1-1: configuration #1 chosen from 1 choice [ 34.533933] usb 1-3: new full speed USB device using ohci_hcd and address 4 [ 34.737055] usb 1-3: configuration #1 chosen from 1 choice [ 34.739991] hub 1-3:1.0: USB hub found [ 34.742974] hub 1-3:1.0: 4 ports detected [ 35.164373] usb 1-7: new full speed USB device using ohci_hcd and address 5 [ 35.374524] usb 1-7: configuration #1 chosen from 1 choice [ 35.577056] usb 2-4.1: new high speed USB device using ehci_hcd and address 6 [ 35.688264] usb 2-4.1: configuration #1 chosen from 1 choice [ 35.888802] usb 2-4.2: new full speed USB device using ehci_hcd and address 7 [ 35.985894] usb 2-4.2: configuration #1 chosen from 1 choice [ 36.197781] usb 1-3.1: new low speed USB device using ohci_hcd and address 6 [ 36.309736] usb 1-3.1: configuration #1 chosen from 1 choice [ 36.529507] usb 1-3.2: new low speed USB device using ohci_hcd and address 7 [ 36.641471] usb 1-3.2: configuration #1 chosen from 1 choice [ 36.861229] usb 1-3.3: new low speed USB device using ohci_hcd and address 8 [ 36.991180] usb 1-3.3: configuration #1 chosen from 1 choice [ 37.204946] usb 1-3.4: new low speed USB device using ohci_hcd and address 9 [ 37.316910] usb 1-3.4: configuration #1 chosen from 1 choice [ 39.741746] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00 [ 39.741760] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40 [ 39.770796] input: Power Button (FF) as /devices/virtual/input/input2 [ 39.791211] ACPI: Power Button (FF) [PWRF] [ 39.791301] input: Power Button (CM) as /devices/virtual/input/input3 [ 39.823168] ACPI: Power Button (CM) [PWRB] [ 40.538125] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7504 [ 40.539129] usblp1: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x03F0 pid 0xBB02 [ 40.539146] usbcore: registered new interface driver usblp [ 40.631338] usbcore: registered new interface driver hiddev [ 40.639153] input: CH PRODUCTS CH PRO PEDALS USB as /devices/pci0000:00/0000:00:02.0/usb1/1-3/1-3.1/1-3.1:1.0/input/input4 [ 40.639179] input,hidraw0: USB HID v1.00 Joystick [CH PRODUCTS CH PRO PEDALS USB ] on usb-0000:00:02.0-3.1 [ 40.647158] input: CH PRODUCTS CH FLIGHT SIM YOKE USB as /devices/pci0000:00/0000:00:02.0/usb1/1-3/1-3.2/1-3.2:1.0/input/input5 [ 40.647176] input,hidraw1: USB HID v1.00 Joystick [CH PRODUCTS CH FLIGHT SIM YOKE USB ] on usb-0000:00:02.0-3.2 [ 40.661155] input: Microsoft SideWinder Precision 2 Joystick as /devices/pci0000:00/0000:00:02.0/usb1/1-3/1-3.3/1-3.3:1.0/input/input6 [ 40.661174] input,hidraw2: USB HID v1.10 Joystick [Microsoft SideWinder Precision 2 Joystick] on usb-0000:00:02.0-3.3 [ 40.669157] input: CH PRODUCTS CH THROTTLE QUADRANT as /devices/pci0000:00/0000:00:02.0/usb1/1-3/1-3.4/1-3.4:1.0/input/input7 [ 40.669174] input,hidraw3: USB HID v1.00 Joystick [CH PRODUCTS CH THROTTLE QUADRANT] on usb-0000:00:02.0-3.4 [ 40.669190] usbcore: registered new interface driver usbhid [ 40.669193] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 41.112291] Linux video capture interface: v2.00 [ 41.204895] gameport: EMU10K1 is pci0000:01:06.1/gameport0, io 0xa400, speed 608kHz [ 41.229986] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 41.273990] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 41.317869] usbcore: registered new interface driver libusual [ 41.431153] Initializing USB Mass Storage driver... [ 41.437573] scsi6 : SCSI emulation for USB Mass Storage devices [ 41.439860] usb-storage: device found at 6 [ 41.439863] usb-storage: waiting for device to settle before scanning [ 41.442589] scsi7 : SCSI emulation for USB Mass Storage devices [ 41.444301] usbcore: registered new interface driver usb-storage [ 41.444304] USB Mass Storage support registered. [ 41.444308] usb-storage: device found at 7 [ 41.444309] usb-storage: waiting for device to settle before scanning [ 41.444508] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 41.534869] bttv: driver version 0.9.17 loaded [ 41.534874] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 41.534928] bttv: Bt8xx card found (0). [ 41.534950] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 19 [ 41.534959] bttv0: Bt878 (rev 17) at 0000:01:07.0, irq: 19, latency: 32, mmio: 0xfdfff000 [ 41.535247] bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected] [ 41.535270] bttv0: gpio: en=00000000, out=00000000 in=00ffc0ff [init] [ 41.536302] tveeprom 2-0050: Huh, no eeprom present (err=-121)? [ 41.536304] bttv0: tuner type unset [ 41.536306] bttv0: i2c: checking for MSP34xx @ 0x80... not found [ 41.536766] bttv0: i2c: checking for TDA9875 @ 0xb0... not found [ 41.537235] bttv0: i2c: checking for TDA7432 @ 0x8a... not found [ 41.537728] bttv0: registered device video0 [ 41.537744] bttv0: registered device vbi0 [ 41.647768] bt878: AUDIO driver version 0.0.0 loaded [ 41.647811] bt878: Bt878 AUDIO function found (0). [ 41.647829] ACPI: PCI Interrupt 0000:01:07.1[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 19 [ 41.647834] bt878_probe: card id=[0x0], Unknown card. [ 41.647835] Exiting.. [ 41.647838] ACPI: PCI interrupt for device 0000:01:07.1 disabled [ 41.647844] bt878: probe of 0000:01:07.1 failed with error -22 [ 41.709625] Linux agpgart interface v0.102 [ 41.762128] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 41.762137] ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 21 [ 41.811364] nvidia: module license 'NVIDIA' taints kernel. [ 42.064591] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 42.064602] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 22 [ 42.064609] PCI: Setting latency timer of device 0000:05:00.0 to 64 [ 42.064840] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008 [ 42.294032] usbcore: registered new interface driver snd-usb-audio [ 42.585857] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input9 [ 42.629333] parport_pc 00:09: reported by Plug and Play ACPI [ 42.629356] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 43.211555] lp0: using parport0 (interrupt-driven). [ 43.282178] Adding 3229024k swap on /dev/sdb5. Priority:-1 extents:1 across:3229024k [ 43.820538] EXT3 FS on sdb1, internal journal [ 45.581942] ip_tables: (C) 2000-2006 Netfilter Core Team [ 45.881273] No dock devices found. [ 46.164616] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ processors (2 cpu cores) (version 2.20.00) [ 46.163572] powernow-k8: 0 : fid 0x13 (2700 MHz), vid 0x8 [ 46.163575] powernow-k8: 1 : fid 0x12 (2600 MHz), vid 0x9 [ 46.163577] powernow-k8: 2 : fid 0x10 (2400 MHz), vid 0xb [ 46.163579] powernow-k8: 3 : fid 0xe (2200 MHz), vid 0xd [ 46.163580] powernow-k8: 4 : fid 0xc (2000 MHz), vid 0xf [ 46.163582] powernow-k8: 5 : fid 0xa (1800 MHz), vid 0x11 [ 46.163583] powernow-k8: 6 : fid 0x2 (1000 MHz), vid 0x12 [ 46.479352] usb-storage: device scan complete [ 46.479438] usb-storage: device scan complete [ 46.480270] scsi 7:0:0:0: Direct-Access HP Photosmart 8400 1.00 PQ: 0 ANSI: 2 [ 46.483510] scsi 6:0:0:0: Direct-Access ST350083 0AS PQ: 0 ANSI: 2 [ 46.483637] sd 7:0:0:0: [sdd] Attached SCSI removable disk [ 46.483663] sd 7:0:0:0: Attached scsi generic sg4 type 0 [ 46.505741] sd 6:0:0:0: [sde] 976773168 512-byte hardware sectors (500108 MB) [ 46.508224] sd 6:0:0:0: [sde] Write Protect is off [ 46.508231] sd 6:0:0:0: [sde] Mode Sense: 38 00 00 00 [ 46.508233] sd 6:0:0:0: [sde] Assuming drive cache: write through [ 46.531715] sd 6:0:0:0: [sde] 976773168 512-byte hardware sectors (500108 MB) [ 46.534193] sd 6:0:0:0: [sde] Write Protect is off [ 46.534195] sd 6:0:0:0: [sde] Mode Sense: 38 00 00 00 [ 46.534197] sd 6:0:0:0: [sde] Assuming drive cache: write through [ 46.534202] sde: sde1 [ 46.542880] sd 6:0:0:0: [sde] Attached SCSI disk [ 46.542915] sd 6:0:0:0: Attached scsi generic sg5 type 0 [ 46.869034] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 46.869039] apm: disabled - APM is not SMP safe. [ 46.990201] ppdev: user-space parallel port driver [ 47.109250] audit(1211526423.965:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5521 profile="/usr/sbin/cupsd" namespace="default" [ 47.843003] Clocksource tsc unstable (delta = -314823708 ns) [ 48.624704] Bluetooth: Core ver 2.11 [ 48.624937] NET: Registered protocol family 31 [ 48.624939] Bluetooth: HCI device and connection manager initialized [ 48.624943] Bluetooth: HCI socket layer initialized [ 48.641126] Bluetooth: L2CAP ver 2.9 [ 48.641130] Bluetooth: L2CAP socket layer initialized [ 48.658797] Bluetooth: RFCOMM socket layer initialized [ 48.658807] Bluetooth: RFCOMM TTY layer initialized [ 48.658809] Bluetooth: RFCOMM ver 1.8 [ 49.505360] NET: Registered protocol family 17 [ 51.343652] NET: Registered protocol family 10 [ 51.343829] lo: Disabled Privacy Extensions [ 56.467309] eth0: no IPv6 routers present [ 315.637699] usb 2-4.3: new high speed USB device using ehci_hcd and address 8 [ 315.672781] usb 2-4.3: configuration #1 chosen from 1 choice [ 315.672908] scsi8 : SCSI emulation for USB Mass Storage devices [ 315.672983] usb-storage: device found at 8 [ 315.672985] usb-storage: waiting for device to settle before scanning [ 317.523449] usb-storage: device scan complete [ 317.523908] scsi 8:0:0:0: Direct-Access WDC WD80 0UE-00KVT0 01.0 PQ: 0 ANSI: 0 [ 317.525660] sd 8:0:0:0: [sdf] 156301488 512-byte hardware sectors (80026 MB) [ 317.526811] sd 8:0:0:0: [sdf] Write Protect is off [ 317.526814] sd 8:0:0:0: [sdf] Mode Sense: 03 00 00 00 [ 317.526816] sd 8:0:0:0: [sdf] Assuming drive cache: write through [ 317.528613] sd 8:0:0:0: [sdf] 156301488 512-byte hardware sectors (80026 MB) [ 317.529769] sd 8:0:0:0: [sdf] Write Protect is off [ 317.529772] sd 8:0:0:0: [sdf] Mode Sense: 03 00 00 00 [ 317.529773] sd 8:0:0:0: [sdf] Assuming drive cache: write through [ 317.530112] sdf: sdf1 [ 317.702623] sd 8:0:0:0: [sdf] Attached SCSI disk [ 317.702663] sd 8:0:0:0: Attached scsi generic sg6 type 0 vasilis@vasilis-desktop:~$ clear screen vasilis@vasilis-desktop:~$ lsmod Module Size Used by ipv6 267780 29 binfmt_misc 12808 1 af_packet 23812 2 rfcomm 41744 2 l2cap 25728 13 rfcomm bluetooth 61156 4 rfcomm,l2cap ppdev 10372 0 powernow_k8 16704 1 cpufreq_conservative 8712 0 cpufreq_stats 7104 0 cpufreq_ondemand 9740 1 freq_table 5536 3 powernow_k8,cpufreq_stats,cpufreq_ondemand cpufreq_powersave 2688 0 cpufreq_userspace 5284 0 sbs 15112 0 video 19856 0 output 4736 1 video container 5632 0 dock 11280 0 sbshc 7680 1 sbs battery 14212 0 iptable_filter 3840 0 ip_tables 14820 1 iptable_filter x_tables 16132 1 ip_tables ac 6916 0 sbp2 24072 0 lp 12324 0 joydev 13120 0 snd_emu10k1_synth 8064 0 snd_emux_synth 36224 1 snd_emu10k1_synth snd_seq_virmidi 8192 1 snd_emux_synth snd_seq_midi_emul 7552 1 snd_emux_synth nvidia 7825536 34 snd_emu10k1 146880 5 snd_emu10k1_synth snd_ac97_codec 101028 1 snd_emu10k1 agpgart 34760 1 nvidia snd_usb_audio 83936 2 ac97_bus 3072 1 snd_ac97_codec parport_pc 36260 1 parport 37832 3 ppdev,lp,parport_pc bt878 11832 0 psmouse 40336 0 snd_pcm_oss 42144 0 snd_mixer_oss 17920 2 snd_pcm_oss serio_raw 7940 0 k8temp 6656 0 bttv 175860 1 bt878 snd_pcm 78596 4 snd_emu10k1,snd_ac97_codec,snd_usb_audio,snd_pcm_oss evdev 13056 3 snd_usb_lib 18432 1 snd_usb_audio ir_common 36100 1 bttv pcspkr 4224 0 compat_ioctl32 2304 1 bttv i2c_algo_bit 7300 1 bttv usb_storage 73664 2 videobuf_dma_sg 14980 1 bttv videobuf_core 18820 2 bttv,videobuf_dma_sg btcx_risc 5896 1 bttv snd_page_alloc 11400 2 snd_emu10k1,snd_pcm snd_util_mem 5632 2 snd_emux_synth,snd_emu10k1 libusual 19108 1 usb_storage shpchp 34452 0 pci_hotplug 30880 1 shpchp tveeprom 16656 1 bttv emu10k1_gp 4608 0 gameport 16008 2 emu10k1_gp snd_hwdep 10500 3 snd_emux_synth,snd_emu10k1,snd_usb_audio videodev 29440 1 bttv v4l2_common 18304 2 bttv,videodev v4l1_compat 15492 2 bttv,videodev snd_seq_dummy 4868 0 snd_seq_oss 35584 0 snd_seq_midi 9376 0 snd_rawmidi 25760 4 snd_seq_virmidi,snd_emu10k1,snd_usb_lib,snd_seq_midi snd_seq_midi_event 8320 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi snd_seq 54224 9 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 24836 3 snd_emu10k1,snd_pcm,snd_seq snd_seq_device 9612 8 snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq snd 56996 26 snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_ac97_codec,snd_usb_audio,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_usb_lib,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 8800 2 snd usbhid 31872 0 hid 38784 1 usbhid usblp 15872 0 button 9232 0 i2c_nforce2 7680 0 i2c_core 24832 5 nvidia,bttv,i2c_algo_bit,tveeprom,i2c_nforce2 ext3 136712 1 jbd 48404 1 ext3 mbcache 9600 1 ext3 sg 36880 0 sr_mod 17956 0 cdrom 37408 1 sr_mod sd_mod 30720 11 sata_nv 27528 0 pata_amd 14212 4 pata_acpi 8320 0 ohci1394 33584 0 forcedeth 51980 0 ieee1394 93752 2 sbp2,ohci1394 ata_generic 8324 0 ehci_hcd 37900 0 libata 159344 4 sata_nv,pata_amd,pata_acpi,ata_generic scsi_mod 151436 6 sbp2,usb_storage,sg,sr_mod,sd_mod,libata ohci_hcd 25348 0 usbcore 146028 9 snd_usb_audio,snd_usb_lib,usb_storage,libusual,usbhid,usblp,ehci_hcd,ohci_hcd thermal 16796 0 processor 36872 2 powernow_k8,thermal fan 5636 0 fbcon 42912 0 tileblit 3456 1 fbcon font 9472 1 fbcon bitblit 6784 1 fbcon softcursor 3072 1 bitblit fuse 50580 11