Re: ASUS ΝΧ1101 Gigabit adapter - Πρόβλημα στην Εγκατάσταση‏

[Batzilo™ Βασίλης Σ]

Λοιπόν δοκίμασα να κάψω το Ubuntu 12.04 Minimal σε CD αλλά ουτε αυτή η εγκατάσταση αναγνωρίζει την κάρτα δικτύου.

Μετά έκαψα σε CD το PLoP Boot Manager και έτρεξε, έκανα boot απο USB και έτρεξα το LiveCD Ubuntu 12.04 LTS. Και *βουαλά* η κάρτα δικτύου δουλεύει κανονικά και έχω πρόσβαση στο διαδίκτυο!

Ανοιγω τερματικό και τρέχω αυτά:

ubuntu at ubuntu:~$ lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge [8086:1a30] (rev 03)
00:01.0 PCI bridge [0604]: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge [8086:1a31] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 12)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801BA ISA Bridge (LPC) [8086:2440] (rev 12)
00:1f.1 IDE interface [0101]: Intel Corporation 82801BA IDE U100 Controller [8086:244b] (rev 12)
00:1f.2 USB controller [0c03]: Intel Corporation 82801BA/BAM USB Controller #1 [8086:2442] (rev 12)
00:1f.3 SMBus [0c05]: Intel Corporation 82801BA/BAM SMBus Controller [8086:2443] (rev 12)
00:1f.4 USB controller [0c03]: Intel Corporation 82801BA/BAM USB Controller #1 [8086:2444] (rev 12)
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801BA/BAM AC'97 Audio Controller [8086:2445] (rev 12)
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV18 [GeForce4 MX 440 AGP 8x] [10de:0181] (rev a4)
02:02.0 Ethernet controller [0200]: Sundance Technology Inc / IC Plus Corp IP1000 Family Gigabit Ethernet [13f0:1023] (rev 41)
ubuntu at ubuntu:~$ sudo lshw -c network
  *-network               
       description: Ethernet interface
       product: IP1000 Family Gigabit Ethernet
       vendor: Sundance Technology Inc / IC Plus Corp
       physical id: 2
       bus info: pci at 0000:02:02.0
       logical name: eth0
       version: 41
       serial: 00:1d:60:5c:e9:ad
       size: 100Mbit/s
       capacity: 100Mbit/s
       width: 32 bits
       clock: 66MHz
       capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=Sundance Technology IPG Triple- duplex=full ip=192.168.0.6 latency=32 maxlatency=10 mingnt=80 multicast=yes port=MII speed=100Mbit/s
       resources: irq:18 ioport:c000(size=256) memory:df000000-df0000ff memory:20000000-2000ffff
ubuntu at ubuntu:~$ sudo lspci -nnvvv -d 13f0:1023
02:02.0 Ethernet controller [0200]: Sundance Technology Inc / IC Plus Corp IP1000 Family Gigabit Ethernet [13f0:1023] (rev 41)
    Subsystem: ASUSTeK Computer Inc. NX1101 [1043:8180]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 32 (20000ns min, 2500ns max), Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 18
    Region 0: I/O ports at c000 [size=256]
    Region 1: Memory at df000000 (32-bit, non-prefetchable) [size=256]
    [virtual] Expansion ROM at 20000000 [disabled] [size=64K]
    Capabilities: [50] Power Management version 2
        Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
        Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=2 PME-
    Kernel driver in use: Sundance Technology IPG Triple-Speed Ethernet
    Kernel modules: ipg

ubuntu at ubuntu:~$

Τι πιστεύετε πρέπει να κάνω για να δω την κάρτα δικτύου οταν κάνω την εγκατάσταση του Ubuntu Minimal 11.04 απο Command Line?
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ubuntu.com/archives/ubuntu-gr/attachments/20120809/5471fad2/attachment.html>