Re: ΛΙΣΤΑ ΒΟΗΘΕΙΑ ΚΟΛΛΗΣΑ

g k giormatsis at gmail.com
Thu Jul 10 12:46:54 BST 2008


lspci

chad at chad-laptop:~$ sudo lspci
[sudo] password for chad:
00:00.0 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:06.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC
(rev 01)
00:09.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev
01)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem
Controller (rev 80)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev
74)
01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro
VGA Adapter (rev 02)
chad at chad-laptop:~$

dmesg

3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 18 14:43:41 UTC 2008 (Ubuntu
2.6.24-19.34-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001bfef000 (usable)
[    0.000000]  BIOS-e820: 000000001bff0000 - 000000001bffffc0 (ACPI data)
[    0.000000]  BIOS-e820: 000000001bffffc0 - 000000001c000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 447MB LOWMEM available.
[    0.000000] Entering add_active_range(0, 0, 114671) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   114671
[    0.000000]   HighMem    114671 ->   114671
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   114671
[    0.000000] On node 0 totalpages: 114671
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 863 pages used for memmap
[    0.000000]   Normal zone: 109712 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP signature @ 0xC00E6010 checksum 0
[    0.000000] ACPI: RSDP 000E6010, 0014 (r0 OID_00)
[    0.000000] ACPI: RSDT 1BFFC3C0, 002C (r1 INSYDE FACP_000      100
0000    10200)
[    0.000000] ACPI: FACP 1BFFFB10, 0074 (r1 INSYDE FACP_000      100
0000    10200)
[    0.000000] ACPI: DSDT 1BFFC400, 3709 (r1 MTC___ 8650____     1000 INTL
2002036)
[    0.000000] ACPI: FACS 1BFFFFC0, 0040
[    0.000000] ACPI: APIC 1BFFFBA0, 005A (r1 INSYDE APIC_000 30303030
0000    10200)
[    0.000000] ACPI: DMI detected: Fujitsu Siemens
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:13 APIC version 20
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 20000000 (gap:
1c000000:e3f80000)
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 -
00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 -
00000000000e0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e0000 -
0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total
pages: 113776
[    0.000000] Kernel command line:
root=UUID=2bdb6d6d-a154-465d-bffb-6b5da495133c ro quiet splash linux
resolution=1280x800 locale=el_GR
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[    0.000000] Detected 1492.671 MHz processor.
[    9.736668] Console: colour VGA+ 80x25
[    9.736675] console [tty0] enabled
[    9.736923] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
[    9.737219] Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
[    9.751699] Memory: 442628k/458684k available (2177k kernel code, 15448k
reserved, 1006k data, 368k init, 0k highmem)
[    9.751710] virtual kernel memory layout:
[    9.751711]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[    9.751712]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    9.751714]     vmalloc : 0xdc800000 - 0xff7fe000   ( 559 MB)
[    9.751715]     lowmem  : 0xc0000000 - 0xdbfef000   ( 447 MB)
[    9.751717]       .init : 0xc0421000 - 0xc047d000   ( 368 kB)
[    9.751718]       .data : 0xc0320434 - 0xc041bdc4   (1006 kB)
[    9.751720]       .text : 0xc0100000 - 0xc0320434   (2177 kB)
[    9.751724] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[    9.751773] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4,
CPUs=1, Nodes=1
[    9.831809] Calibrating delay using timer specific routine.. 2989.13
BogoMIPS (lpj=5978276)
[    9.831843] Security Framework initialized
[    9.831854] SELinux:  Disabled at boot.
[    9.831873] AppArmor: AppArmor initialized
[    9.831879] Failure registering capabilities with primary security
module.
[    9.831889] Mount-cache hash table entries: 512
[    9.832051] Initializing cgroup subsys ns
[    9.832059] Initializing cgroup subsys cpuacct
[    9.832073] CPU: After generic identify, caps: afe9fbff 00000000 00000000
00000000 00000000 00000000 00000000 00000000
[    9.832087] CPU: L1 I cache: 32K, L1 D cache: 32K
[    9.832090] CPU: L2 cache: 1024K
[    9.832094] CPU: After all inits, caps: afe9fbff 00000000 00000000
00002040 00000000 00000000 00000000 00000000
[    9.832104] Compat vDSO mapped to ffffe000.
[    9.832119] Checking 'hlt' instruction... OK.
[    9.848319] SMP alternatives: switching to UP code
[    9.850643] Freeing SMP alternatives: 11k freed
[    9.850779] Early unpacking initramfs... done
[   10.256933] ACPI: Core revision 20070126
[   10.257010] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml
not found.
[   10.269153] CPU0: Intel(R) Celeron(R) M processor         1.50GHz
stepping 08
[   10.269185] Total of 1 processors activated (2989.13 BogoMIPS).
[   10.269939] ENABLING IO-APIC IRQs
[   10.270268] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   10.415895] Brought up 1 CPUs
[   10.415958] CPU0 attaching sched-domain:
[   10.415962]  domain 0: span 01
[   10.415964]   groups: 01
[   10.416175] net_namespace: 64 bytes
[   10.416187] Booting paravirtualized kernel on bare hardware
[   10.416733] Time: 11:35:07  Date: 07/10/08
[   10.416768] NET: Registered protocol family 16
[   10.416996] EISA bus registered
[   10.417032] ACPI: bus type pci registered
[   10.417199] PCI: PCI BIOS revision 2.10 entry at 0xe9c04, last bus=1
[   10.417202] PCI: Using configuration type 1
[   10.417219] Setting up standard PCI resources
[   10.419577] ACPI: EC: Look up EC in DSDT
[   10.422554] ACPI: Interpreter enabled
[   10.422558] ACPI: (supports S0 S1 S3 S4 S5)
[   10.422577] ACPI: Using IOAPIC for interrupt routing
[   10.424370] ACPI: EC: non-query interrupt received, switching to
interrupt mode
[   10.432830] ACPI: EC: GPE = 0x1, I/O: command/status = 0x66, data = 0x62
[   10.432834] ACPI: EC: driver started in interrupt mode
[   10.432878] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   10.433691] PCI quirk: region 1000-107f claimed by vt8235 PM
[   10.433696] PCI quirk: region 1400-140f claimed by vt8235 SMB
[   10.434170] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   10.447250] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
[   10.447356] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *7 10 11 14 15)
[   10.447452] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
[   10.447548] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 14 15)
[   10.447634] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15)
*0, disabled.
[   10.447720] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15)
*0, disabled.
[   10.447807] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15)
*0, disabled.
[   10.447900] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15)
*0, disabled.
[   10.448009] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
[   10.448127] ACPI: PCI Interrupt Link [ALKB] (IRQs 23) *11
[   10.448282] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *5, disabled.
[   10.448368] ACPI Error (uteval-0290): Return object type is incorrect
[\_SB_.PCI0.ALKD._CRS] (Node d9cc8678), AE_TYPE
[   10.448378] ACPI Error (uteval-0296): Type returned from _CRS was
incorrect: Integer, expected Btypes: 4 [20070126]
[   10.448385] ACPI Exception (pci_link-0282): AE_TYPE, Evaluating _CRS
[20070126]
[   10.448388] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0
[   10.448497] Linux Plug and Play Support v0.97 (c) Adam Belay
[   10.448532] pnp: PnP ACPI init
[   10.448541] ACPI: bus type pnp registered
[   10.453072] pnp: PnP ACPI: found 9 devices
[   10.453074] ACPI: ACPI bus type pnp unregistered
[   10.453079] PnPBIOS: Disabled by ACPI PNP
[   10.453327] PCI: Using ACPI for IRQ routing
[   10.453331] PCI: If a device doesn't work, try "pci=routeirq".  If it
helps, post a report
[   10.467869] NET: Registered protocol family 8
[   10.467872] NET: Registered protocol family 20
[   10.467953] AppArmor: AppArmor Filesystem Enabled
[   10.471845] Time: tsc clocksource has been installed.
[   10.479891] system 00:05: iomem range 0xe0000-0xfffff could not be
reserved
[   10.479895] system 00:05: iomem range 0xfff80000-0xffffffff could not be
reserved
[   10.479899] system 00:05: iomem range 0xfec00000-0xfec00fff has been
reserved
[   10.479902] system 00:05: iomem range 0xfee00000-0xfee00fff has been
reserved
[   10.479909] system 00:07: ioport range 0x330-0x331 has been reserved
[   10.479913] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[   10.479916] system 00:07: ioport range 0x1000-0x107f has been reserved
[   10.479919] system 00:07: ioport range 0x1400-0x140f has been reserved
[   10.510398] PCI: Bridge: 0000:00:01.0
[   10.510402]   IO window: c000-dfff
[   10.510407]   MEM window: c0000000-cfffffff
[   10.510412]   PREFETCH window: 90000000-9fffffff
[   10.510418] PCI: Bus 2, cardbus bridge: 0000:00:09.0
[   10.510420]   IO window: 00001800-000018ff
[   10.510425]   IO window: 00001c00-00001cff
[   10.510430]   PREFETCH window: 20000000-23ffffff
[   10.510435]   MEM window: 24000000-27ffffff
[   10.510460] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   10.510479] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) ->
IRQ 16
[   10.510499] NET: Registered protocol family 2
[   10.547924] IP route cache hash table entries: 4096 (order: 2, 16384
bytes)
[   10.548150] TCP established hash table entries: 16384 (order: 5, 131072
bytes)
[   10.548283] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[   10.548432] TCP: Hash tables configured (established 16384 bind 16384)
[   10.548436] TCP reno registered
[   10.560021] checking if image is initramfs... it is
[   11.011877] Switched to high resolution mode on CPU 0
[   11.364253] Freeing initrd memory: 7320k freed
[   11.365073] audit: initializing netlink socket (disabled)
[   11.365096] audit(1215689707.500:1): initialized
[   11.367563] VFS: Disk quotas dquot_6.5.1
[   11.367660] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   11.367884] io scheduler noop registered
[   11.367887] io scheduler anticipatory registered
[   11.367890] io scheduler deadline registered
[   11.367906] io scheduler cfq registered (default)
[   11.367927] PCI: VIA PCI bridge detected. Disabling DAC.
[   11.367989] Boot video device is 0000:01:00.0
[   11.368325] isapnp: Scanning for PnP cards...
[   11.722747] isapnp: No Plug & Play device found
[   11.755717] Real Time Clock Driver v1.12ac
[   11.755862] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[   11.757256] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[   11.757343] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[   11.757465] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64
irq 1,12
[   11.769928] i8042.c: Detected active multiplexing controller, rev 1.1.
[   11.775775] serio: i8042 KBD port at 0x60,0x64 irq 1
[   11.775781] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   11.775784] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   11.775787] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   11.775789] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   11.787809] mice: PS/2 mouse device common for all mice
[   11.787942] EISA: Probing bus 0 at eisa.0
[   11.787952] Cannot allocate resource for EISA slot 1
[   11.787986] EISA: Detected 0 cards.
[   11.787989] cpuidle: using governor ladder
[   11.787992] cpuidle: using governor menu
[   11.788123] NET: Registered protocol family 1
[   11.788158] Using IPI No-Shortcut mode
[   11.788202] registered taskstats version 1
[   11.788323]   Magic number: 0:950:579
[   11.788520] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   11.788523] EDD information not available.
[   11.788814] Freeing unused kernel memory: 368k freed
[   11.799808] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[   13.036625] fuse init (API version 7.9)
[   13.062468] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[   13.062476] ACPI: Processor [CPU0] (supports 16 throttling states)
[   13.887666] usbcore: registered new interface driver usbfs
[   13.887700] usbcore: registered new interface driver hub
[   13.907327] usbcore: registered new device driver usb
[   13.951301] SCSI subsystem initialized
[   13.959978] USB Universal Host Controller Interface driver v3.0
[   13.960216] ACPI Error (uteval-0290): Return object type is incorrect
[\_SB_.PCI0.ALKD._CRS] (Node d9cc8678), AE_TYPE
[   13.960227] ACPI Error (uteval-0296): Type returned from _CRS was
incorrect: Integer, expected Btypes: 4 [20070126]
[   13.960234] ACPI Exception (pci_link-0282): AE_TYPE, Evaluating _CRS
[20070126]
[   13.960239] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try
pci=noacpi or acpi=off
[   13.960244] ACPI: Invalid IRQ link routing entry
[   13.960246] ACPI: Unable to derive IRQ for device 0000:00:10.0
[   13.960248] ACPI: PCI Interrupt 0000:00:10.0[A]: no GSI - using IRQ 11
[   13.960278] uhci_hcd 0000:00:10.0: UHCI Host Controller
[   13.960850] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus
number 1
[   13.960891] uhci_hcd 0000:00:10.0: irq 11, io base 0x00001200
[   13.961069] usb usb1: configuration #1 chosen from 1 choice
[   13.961100] hub 1-0:1.0: USB hub found
[   13.961108] hub 1-0:1.0: 2 ports detected
[   14.044596] libata version 3.00 loaded.
[   14.059581] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[   14.063827] ACPI Error (uteval-0290): Return object type is incorrect
[\_SB_.PCI0.ALKD._CRS] (Node d9cc8678), AE_TYPE
[   14.063840] ACPI Error (uteval-0296): Type returned from _CRS was
incorrect: Integer, expected Btypes: 4 [20070126]
[   14.063847] ACPI Exception (pci_link-0282): AE_TYPE, Evaluating _CRS
[20070126]
[   14.063851] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try
pci=noacpi or acpi=off
[   14.063856] ACPI: Invalid IRQ link routing entry
[   14.063858] ACPI: Unable to derive IRQ for device 0000:00:10.1
[   14.063861] ACPI: PCI Interrupt 0000:00:10.1[B]: no GSI - using IRQ 7
[   14.063891] uhci_hcd 0000:00:10.1: UHCI Host Controller
[   14.063940] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus
number 2
[   14.063979] uhci_hcd 0000:00:10.1: irq 7, io base 0x00001220
[   14.064116] usb usb2: configuration #1 chosen from 1 choice
[   14.064145] hub 2-0:1.0: USB hub found
[   14.064152] hub 2-0:1.0: 2 ports detected
[   14.167828] ACPI Error (uteval-0290): Return object type is incorrect
[\_SB_.PCI0.ALKD._CRS] (Node d9cc8678), AE_TYPE
[   14.167841] ACPI Error (uteval-0296): Type returned from _CRS was
incorrect: Integer, expected Btypes: 4 [20070126]
[   14.167848] ACPI Exception (pci_link-0282): AE_TYPE, Evaluating _CRS
[20070126]
[   14.167853] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try
pci=noacpi or acpi=off
[   14.167858] ACPI: Invalid IRQ link routing entry
[   14.167860] ACPI: Unable to derive IRQ for device 0000:00:10.2
[   14.167862] ACPI: PCI Interrupt 0000:00:10.2[C]: no GSI - using IRQ 5
[   14.167892] uhci_hcd 0000:00:10.2: UHCI Host Controller
[   14.167925] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus
number 3
[   14.167963] uhci_hcd 0000:00:10.2: irq 5, io base 0x00001240
[   14.168101] usb usb3: configuration #1 chosen from 1 choice
[   14.168138] hub 3-0:1.0: USB hub found
[   14.168145] hub 3-0:1.0: 2 ports detected
[   14.271895] PCI: Enabling device 0000:00:10.3 (0000 -> 0002)
[   14.272034] ACPI Error (uteval-0290): Return object type is incorrect
[\_SB_.PCI0.ALKD._CRS] (Node d9cc8678), AE_TYPE
[   14.272044] ACPI Error (uteval-0296): Type returned from _CRS was
incorrect: Integer, expected Btypes: 4 [20070126]
[   14.272051] ACPI Exception (pci_link-0282): AE_TYPE, Evaluating _CRS
[20070126]
[   14.272056] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try
pci=noacpi or acpi=off
[   14.272061] ACPI: Invalid IRQ link routing entry
[   14.272063] ACPI: Unable to derive IRQ for device 0000:00:10.3
[   14.272065] ACPI: PCI Interrupt 0000:00:10.3[D]: no GSI - using IRQ 10
[   14.272099] ehci_hcd 0000:00:10.3: EHCI Host Controller
[   14.272132] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus
number 4
[   14.272199] ehci_hcd 0000:00:10.3: irq 10, io mem 0x28011000
[   14.283538] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10
Dec 2004
[   14.283693] usb usb4: configuration #1 chosen from 1 choice
[   14.283725] hub 4-0:1.0: USB hub found
[   14.283734] hub 4-0:1.0: 6 ports detected
[   14.388016] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 11, using
IRQ 23
[   14.388022] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 23
[   14.388032] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKB] -> GSI 23
(level, low) -> IRQ 17
[   14.392288] eth0: VIA Rhine II at 0xd0000000, 00:40:d0:86:8e:eb, IRQ 17.
[   14.393003] eth0: MII PHY found at address 1, status 0x7849 advertising
05e1 Link 0000.
[   14.393188] ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS
bug
[   14.393238] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using
IRQ 20
[   14.393241] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[   14.393245] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20
(level, low) -> IRQ 18
[   14.393300] ACPI: PCI interrupt for device 0000:00:11.1 disabled
[   14.397289] pata_via 0000:00:11.1: version 0.3.3
[   14.397323] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20
(level, low) -> IRQ 18
[   14.398211] scsi0 : pata_via
[   14.398868] scsi1 : pata_via
[   14.401414] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq
14
[   14.401418] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1108 irq
15
[   14.564066] ata1.00: ATA-7: FUJITSU MHV2060AT, 000000A0, max UDMA/100
[   14.564072] ata1.00: 117210240 sectors, multi 16: LBA
[   14.579952] ata1.00: configured for UDMA/100
[   14.899880] ata2.00: ATAPI: HL-DT-ST DVD-RW GWA-4082N, CW02, max UDMA/33
[   15.071737] ata2.00: configured for UDMA/33
[   15.071918] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2060A
0000 PQ: 0 ANSI: 5
[   15.075723] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD-RW GWA-4082N
CW02 PQ: 0 ANSI: 5
[   15.090909] Driver 'sd' needs updating - please use bus_type methods
[   15.091035] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012
MB)
[   15.091050] sd 0:0:0:0: [sda] Write Protect is off
[   15.091053] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   15.091072] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[   15.091132] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012
MB)
[   15.091143] sd 0:0:0:0: [sda] Write Protect is off
[   15.091146] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   15.091163] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[   15.091168]  sda:<4>Driver 'sr' needs updating - please use bus_type
methods
[   15.166767]  sda1 sda2 < sda5 >
[   15.195474] sd 0:0:0:0: [sda] Attached SCSI disk
[   15.203009] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   15.203035] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   15.218140] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[   15.218147] Uniform CD-ROM driver Revision: 3.20
[   15.218216] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   15.507486] Attempting manual resume
[   15.507492] swsusp: Resume From Partition 8:5
[   15.507494] PM: Checking swsusp image.
[   15.507733] PM: Resume from disk failed.
[   15.566034] kjournald starting.  Commit interval 5 seconds
[   15.566053] EXT3-fs: mounted filesystem with ordered data mode.
[   26.381371] ath_hal: module license 'Proprietary' taints kernel.
[   26.470537] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112,
RF2413, RF5413)
[   26.778543] wlan: 0.9.4
[   26.985778] Yenta: CardBus bridge found at 0000:00:09.0 [1734:10ab]
[   26.985805] Yenta: Using CSCINT to route CSC interrupts to PCI
[   26.985807] Yenta: Routing CardBus interrupts to PCI
[   26.985813] Yenta TI: socket 0000:00:09.0, mfunc 0x01001002, devctl 0x44
[   27.057173] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   27.214868] Yenta: ISA IRQ mask 0x0058, PCI irq 16
[   27.214875] Socket status: 30000006
[   27.270477] Linux agpgart interface v0.102
[   27.326695] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   27.466494] ath_pci: 0.9.4
[   27.466571] PCI: Enabling device 0000:00:06.0 (0000 -> 0002)
[   27.466585] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 19 (level, low) ->
IRQ 19
[   28.122417] irda_init()
[   28.122449] NET: Registered protocol family 23
[   28.314524] input: Power Button (FF) as /devices/virtual/input/input2
[   28.326379] ACPI: Power Button (FF) [PWRF]
[   28.326513] input: Lid Switch as /devices/virtual/input/input3
[   28.330090] ACPI: Lid Switch [LID]
[   28.330184] input: Sleep Button (CM) as /devices/virtual/input/input4
[   28.342361] ACPI: Sleep Button (CM) [SBTN]
[   28.342448] input: Power Button (CM) as /devices/virtual/input/input5
[   28.358354] ACPI: Power Button (CM) [PBTN]
[   28.509849] ACPI: Battery Slot [BAT0] (battery present)
[   28.569905] ACPI: AC Adapter [AC] (on-line)
[   28.882467] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   29.726664] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input7
[   29.742248] ACPI: Video Device [VGA0] (multi-head: yes  rom: no  post:
no)
[   31.412059] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps:
0xa04713/0x0
[   31.525719] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio3/input/input8
[   31.621384] ath_rate_sample: 1.2 (0.9.4)
[   31.621939] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[   31.621946] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps
12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[   31.621956] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[   31.621960] wifi0: mac 7.8 phy 4.5 radio 5.6
[   31.621965] wifi0: Use hw queue 1 for WME_AC_BE traffic
[   31.621967] wifi0: Use hw queue 0 for WME_AC_BK traffic
[   31.621970] wifi0: Use hw queue 2 for WME_AC_VI traffic
[   31.621972] wifi0: Use hw queue 3 for WME_AC_VO traffic
[   31.621975] wifi0: Use hw queue 8 for CAB traffic
[   31.621977] wifi0: Use hw queue 9 for beacons
[   31.639416] wifi0: Atheros 5212: mem=0x28000000, irq=19
[   31.639945] agpgart: Detected VIA PM800/PN800/PM880/PN880 chipset
[   31.649968] agpgart: AGP aperture is 128M @ 0xa0000000
[   31.650495] ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS
bug
[   31.650629] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 5, using
IRQ 22
[   31.650633] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[   31.650642] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22
(level, low) -> IRQ 20
[   31.650794] PCI: Setting latency timer of device 0000:00:11.5 to 64
[   32.174067] ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22
(level, low) -> IRQ 20
[   32.178049] PCI: Setting latency timer of device 0000:00:11.6 to 64
[   32.930466] cs: IO port probe 0x100-0x3af: clean.
[   32.932595] cs: IO port probe 0x3e0-0x4ff: clean.
[   32.933496] cs: IO port probe 0x820-0x8ff: clean.
[   32.934257] cs: IO port probe 0xc00-0xcf7: clean.
[   32.935183] cs: IO port probe 0xa00-0xaff: clean.
[   34.178500] lp: driver loaded but no devices found
[   34.416967] Adding 1317288k swap on /dev/sda5.  Priority:-1 extents:1
across:1317288k
[   34.970618] EXT3 FS on sda1, internal journal
[   36.310640] ip_tables: (C) 2000-2006 Netfilter Core Team
[   38.214942] No dock devices found.
[   39.691408] apm: BIOS not found.
[   39.889455] ppdev: user-space parallel port driver
[   40.068891] audit(1215689737.069:2): type=1503
operation="inode_permission" requested_mask="a::" denied_mask="a::"
name="/dev/tty" pid=4804 profile="/usr/sbin/cupsd" namespace="default"
[   42.195722] eth0: link down
[   42.354126] Bluetooth: Core ver 2.11
[   42.355253] NET: Registered protocol family 31
[   42.355258] Bluetooth: HCI device and connection manager initialized
[   42.355264] Bluetooth: HCI socket layer initialized
[   42.381247] Bluetooth: L2CAP ver 2.9
[   42.381255] Bluetooth: L2CAP socket layer initialized
[   42.464994] Bluetooth: RFCOMM socket layer initialized
[   42.465017] Bluetooth: RFCOMM TTY layer initialized
[   42.465019] Bluetooth: RFCOMM ver 1.8
[   45.060591] [drm] Initialized drm 1.1.0 20060810
[   45.580968] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) ->
IRQ 21
[   45.581781] [drm] Initialized via 2.11.1 20070202 on minor 0
[   45.789539] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[   45.789568] agpgart: Device is in legacy mode, falling back to 2.x
[   45.789576] agpgart: Putting AGP V2 device at 0000:00:00.0 into 0x mode
[   45.789658] agpgart: Putting AGP V2 device at 0000:01:00.0 into 0x mode
[   62.841756] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[   62.842069] agpgart: Device is in legacy mode, falling back to 2.x
[   62.842217] agpgart: Putting AGP V2 device at 0000:00:00.0 into 0x mode
[   62.842436] agpgart: Putting AGP V2 device at 0000:01:00.0 into 0x mode
[   90.342541] NET: Registered protocol family 10
[   90.343136] lo: Disabled Privacy Extensions
[   90.343814] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  101.332234] ath0: no IPv6 routers present
[  221.124478] ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
[  221.188728] NET: Registered protocol family 17
[  232.049231] ath0: no IPv6 routers present
[  243.268683] ath0: no IPv6 routers present
chad at chad-laptop:~$


 lsmod


chad at chad-laptop:~$ sudo lsmod
Module                  Size  Used by
af_packet              23812  4
ipv6                  267780  8
binfmt_misc            12808  1
via                    43648  2
drm                    82452  3 via
rfcomm                 41744  2
l2cap                  25728  13 rfcomm
bluetooth              61156  4 rfcomm,l2cap
ppdev                  10372  0
cpufreq_conservative     8712  0
cpufreq_stats           7104  0
cpufreq_ondemand        9740  0
cpufreq_userspace       5284  0
freq_table              5536  2 cpufreq_stats,cpufreq_ondemand
cpufreq_powersave       2688  0
container               5632  0
sbs                    15112  0
sbshc                   7680  1 sbs
dock                   11280  0
iptable_filter          3840  0
ip_tables              14820  1 iptable_filter
x_tables               16132  1 ip_tables
parport_pc             36260  0
lp                     12324  0
parport                37832  3 ppdev,parport_pc,lp
joydev                 13120  0
pcmcia                 40876  0
i2c_viapro              9876  0
i2c_core               24832  1 i2c_viapro
wlan_scan_sta          14720  1
ath_rate_sample        14336  1
evdev                  13056  7
serio_raw               7940  0
psmouse                40336  0
snd_via82xx_modem      16264  0
snd_seq_dummy           4868  0
video                  19856  0
snd_via82xx            29464  3
output                  4736  1 video
gameport               16008  1 snd_via82xx
snd_ac97_codec        101028  2 snd_via82xx_modem,snd_via82xx
ac97_bus                3072  1 snd_ac97_codec
snd_pcm_oss            42144  0
snd_mixer_oss          17920  1 snd_pcm_oss
snd_pcm                78596  4
snd_via82xx_modem,snd_via82xx,snd_ac97_codec,snd_pcm_oss
snd_mpu401_uart         9728  1 snd_via82xx
snd_seq_oss            35584  0
snd_seq_midi            9376  0
snd_seq_midi_event      8320  2 snd_seq_oss,snd_seq_midi
pcspkr                  4224  0
snd_rawmidi            25760  2 snd_mpu401_uart,snd_seq_midi
snd_seq                54224  6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              24836  2 snd_pcm,snd_seq
snd_seq_device          9612  5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
ac                      6916  0
battery                14212  0
via_ircc               27796  0
button                  9232  0
snd                    56996  19
snd_via82xx_modem,snd_seq_dummy,snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
via_agp                11136  1
irda                  203068  1 via_ircc
snd_page_alloc         11400  3 snd_via82xx_modem,snd_via82xx,snd_pcm
ath_pci               101024  0
soundcore               8800  1 snd
agpgart                34760  2 drm,via_agp
crc_ccitt               3072  1 irda
shpchp                 34452  0
pci_hotplug            30880  1 shpchp
yenta_socket           27276  1
rsrc_nonstatic         13696  1 yenta_socket
pcmcia_core            40596  3 pcmcia,yenta_socket,rsrc_nonstatic
wlan                  207728  4 wlan_scan_sta,ath_rate_sample,ath_pci
ath_hal               192592  3 ath_rate_sample,ath_pci
ext3                  136712  1
jbd                    48404  1 ext3
mbcache                 9600  1 ext3
sg                     36880  0
sr_mod                 17956  0
cdrom                  37408  1 sr_mod
sd_mod                 30720  3
ata_generic             8324  0
pata_via               13316  2
pata_acpi               8320  0
via_rhine              26632  0
mii                     6400  1 via_rhine
libata                159344  3 ata_generic,pata_via,pata_acpi
ehci_hcd               37900  0
uhci_hcd               27024  0
scsi_mod              151436  4 sg,sr_mod,sd_mod,libata
usbcore               146028  3 ehci_hcd,uhci_hcd
thermal                16796  0
processor              36872  2 thermal
fan                     5636  0
fbcon                  42912  0
tileblit                3456  1 fbcon
font                    9472  1 fbcon
bitblit                 6784  1 fbcon
softcursor              3072  1 bitblit
fuse                   50580  3
chad at chad-laptop:~$

Στις 10 Ιούλιος 2008 2:26 μμ,ο χρήστης Tsabolov Sergey <econlab at uom.gr>
έγραψε:

>  Αφού τον άλλαξες με το χέρι αυτό έχει να κάνει με την κάρτα γραφικών , αν
> είναι onboard τότε έχουμε μικρό  πρόβλημα , κάρτες υπάρχουν ακόμα και παλιές
> έστω με 64 μβ και δεν είναι πρόβλημα να τις βρεις , αν ήτανε μόνο αυτό
> πρόβλημα το λύνουμε βάζοντας μια κάρτα και τότε θα έχει και 3D και φωτιές
> και βροχές και όλα τα καλούδια  .
>
>
> O/H g k έγραψε:
>
> Το δοκίμασα αυτό δεν δουλεψε στο 8.04 τον xorg τον άλλαξα με το χέρι
>
> Στις 10 Ιούλιος 2008 1:52 μμ,ο χρήστης Tsabolov Sergey <econlab at uom.gr>
> έγραψε:
>
>>  https://help.ubuntu.com/community/OpenChrome
>>
>> Όπως λέμε στο Λίνουξ δεν υπάρχει πρόβλημα χωρίς λύση οπότε πάρε  στα χέρια
>> σου το Η/Υ και βλέπουμε άσχετα τι chip έχει
>>
>> θα δούμε μετά .
>>
>> O/H g k έγραψε:
>>
>> Δυστυχώς όλα επάνω ειναι τσιπάκια via και εκεί είναι το πρόβλημα στην
>> κοινότητα έχουν ανοίξει project ειδικά για το θέμα αυτό
>> http://www.openchrome.org/
>> λίγοι όμως έχουν καταφέρει να συνθέσουν τους οδηγούς με επιτυχία
>>
>> Στις 10 Ιούλιος 2008 1:33 μμ,ο χρήστης Tsabolov Sergey <econlab at uom.gr>
>> έγραψε:
>>
>>>  Αν μιλάμε για μητρική δεν νομίζω ότι θα έχει μεγάλο πρόβλημα για 3D κτλ
>>> να έχει μία κάρτα έστω 64 MB nvidia αρκεί .
>>>
>>> τα υπόλοιπα βλέπουμε .
>>>
>>>
>>>  O/H g k έγραψε:
>>>
>>> Μητρική είναι μόλις μου έρθει το μηχάνημα θα στείλω τα logs κατάφερα
>>> πολλές απο τις ρυθμίσεις αλλα απο ότι είδα και στην κοινότητα υπάρχει
>>> πρόβλημα με τους οδηγούς αυτο που δέν μπορώ είναι τα τρισδιάστατα αλλά απο
>>> ότι βλέπω το μοντέλο είναι σπάνιο ειδικά μέσα στην κοινότητα ;-0) ο κάτοχος
>>> είναι 15 ετών και δεν θέλω να απογοητευτεί απο την πρώτη επαφή του με τα
>>> λίνουξ.Ευχαριστώ...!!!
>>>
>>> Στις 10 Ιούλιος 2008 12:30 μμ,ο χρήστης Tsabolov Sergey <econlab at uom.gr>
>>> έγραψε:
>>>
>>>>  Λίγα στοιχεία του μηχανήματος θα ήτανε καλό  να δώσεις
>>>>
>>>> VIA είναι VGA card ?
>>>>
>>>> Από τερματικό , έγραψε όλα αυτά .
>>>>
>>>> lspci
>>>>
>>>> dmesg
>>>>
>>>> lsmod
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>  O/H g k έγραψε:
>>>>
>>>> Προσπαθώντας να μπολιάσω ένα ακόμα μηχάνημα amilo L7310W με Ubuntu 8.04
>>>> τράκαρα με την καθόλου φιλική VIA ο γούγλης δεν βοηθάει πολύ υπάρχει κάποιος
>>>> μεταξύ μας που έχει αντιμετωπίσει αυτό το προβλημα???
>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://lists.ubuntu.com/archives/ubuntu-gr/attachments/20080710/405b158f/attachment-0001.htm 


More information about the Ubuntu-gr mailing list