scanner HP G4010

[papa]

oui alors voilà le résultat:
dmesg | tail -15
[18896.674061] VFS: busy inodes on changed media or resized disk sr0
[18898.672702] VFS: busy inodes on changed media or resized disk sr0
[18898.675224] VFS: busy inodes on changed media or resized disk sr0
[18900.835138] VFS: busy inodes on changed media or resized disk sr0
[18900.962721] VFS: busy inodes on changed media or resized disk sr0
[18902.835316] VFS: busy inodes on changed media or resized disk sr0
[18902.962946] VFS: busy inodes on changed media or resized disk sr0
[18904.835424] VFS: busy inodes on changed media or resized disk sr0
[18904.963146] VFS: busy inodes on changed media or resized disk sr0
[18906.836792] VFS: busy inodes on changed media or resized disk sr0
[18906.963231] VFS: busy inodes on changed media or resized disk sr0
[18908.675480] VFS: busy inodes on changed media or resized disk sr0
[19102.945761] usb 1-8: USB disconnect, address 7
[19791.692061] usb 1-8: new high speed USB device using ehci_hcd and 
address 8
[19791.831935] usb 1-8: configuration #1 chosen from 1 choice

 

et de le cde:
sane-find-scanner

 sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make 
sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x4505 [HP 
Scanjet G4000 Photo series], chip=GL843) at libusb:001:008
found USB scanner (vendor=0x041e, product=0x400c) at libusb:002:003
  # Your USB scanner was (probably) detected. It may or may not be 
supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.


Je te remercie de la rapidité