mpman CT18

thierry thierry.menan at laposte.net
Lun 20 Oct 06:54:08 UTC 2008


Michel Leunen a écrit :
>
> Branche ton mpman et puis donne-nous le résultat de:
>
> $ dmesg
>
> dans un terminal. Donne aussi le résultat d'un:
>
> $ lsusb
>
> Une première recherche avec Google n'est pas très optimiste. Il 
> semblerait qu'il y ait beaucoup de problème avec ces lecteurs même 
> sous Windows.
>
titi at 81rikiki:~$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.24-21-generic (buildd at palmer) (gcc 
version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Mon Aug 25 17:32:09 UTC 
2008 (Ubuntu 2.6.24-21.42-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003bff0000 (usable)
[    0.000000]  BIOS-e820: 000000003bff0000 - 000000003bff8000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003bff8000 - 000000003c000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[    0.000000] 63MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000fbc70
[    0.000000] Entering add_active_range(0, 0, 245744) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   245744
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   245744
[    0.000000] On node 0 totalpages: 245744
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 127 pages used for memmap
[    0.000000]   HighMem zone: 16241 pages, LIFO batch:3
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP signature @ 0xC00FAA40 checksum 0
[    0.000000] ACPI: RSDP 000FAA40, 0014 (r0 AMI   )
[    0.000000] ACPI: RSDT 3BFF0000, 002C (r1 AMIINT SiS740XX     1000 
MSFT  100000B)
[    0.000000] ACPI: FACP 3BFF0030, 0081 (r1 AMIINT SiS740XX       11 
MSFT  100000B)
[    0.000000] ACPI: DSDT 3BFF0120, 3300 (r1    SiS      746      100 
INTL  2002024)
[    0.000000] ACPI: FACS 3BFF8000, 0040
[    0.000000] ACPI: APIC 3BFF00C0, 005A (r1 AMIINT SiS740XX     1000 
MSFT  100000B)
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:8 APIC version 16
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 
0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 
3c000000:c2c00000)
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 
- 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 
- 00000000000f0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000f0000 
- 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  
Total pages: 243825
[    0.000000] Kernel command line: 
root=UUID=37d87a62-96d8-43e8-9c2e-5b5e09cefff6 ro quiet splash
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 1360.085 MHz processor.
[   26.011782] Console: colour VGA+ 80x25
[   26.011788] console [tty0] enabled
[   26.013121] Dentry cache hash table entries: 131072 (order: 7, 524288 
bytes)
[   26.015425] Inode-cache hash table entries: 65536 (order: 6, 262144 
bytes)
[   26.069705] Memory: 962440k/982976k available (2177k kernel code, 
19932k reserved, 1006k data, 368k init, 65472k highmem)
[   26.069719] virtual kernel memory layout:
[   26.069721]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[   26.069722]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   26.069724]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   26.069726]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   26.069728]       .init : 0xc0421000 - 0xc047d000   ( 368 kB)
[   26.069729]       .data : 0xc0320514 - 0xc041bdc4   (1006 kB)
[   26.069731]       .text : 0xc0100000 - 0xc0320514   (2177 kB)
[   26.069737] Checking if this processor honours the WP bit even in 
supervisor mode... Ok.
[   26.069837] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, 
CPUs=1, Nodes=1
[   26.149776] Calibrating delay using timer specific routine.. 2722.24 
BogoMIPS (lpj=5444499)
[   26.149843] Security Framework initialized
[   26.149859] SELinux:  Disabled at boot.
[   26.149898] AppArmor: AppArmor initialized
[   26.149906] Failure registering capabilities with primary security 
module.
[   26.149922] Mount-cache hash table entries: 512
[   26.150208] Initializing cgroup subsys ns
[   26.150218] Initializing cgroup subsys cpuacct
[   26.150240] CPU: After generic identify, caps: 0383fbff c1c3fbff 
00000000 00000000 00000000 00000000 00000000 00000000
[   26.150256] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 
bytes/line)
[   26.150261] CPU: L2 Cache: 64K (64 bytes/line)
[   26.150266] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 
00000420 00000000 00000000 00000000 00000000
[   26.150286] Compat vDSO mapped to ffffe000.
[   26.150312] Checking 'hlt' instruction... OK.
[   26.166218] SMP alternatives: switching to UP code
[   26.168271] Freeing SMP alternatives: 11k freed
[   26.168501] Early unpacking initramfs... done
[   26.679474] ACPI: Core revision 20070126
[   26.679623] ACPI: Looking for DSDT in initramfs... error, file 
/DSDT.aml not found.
[   26.681698] CPU0: AMD Duron(tm)  stepping 01
[   26.681729] Total of 1 processors activated (2722.24 BogoMIPS).
[   26.681869] ENABLING IO-APIC IRQs
[   26.682067] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   26.829135] Brought up 1 CPUs
[   26.829187] CPU0 attaching sched-domain:
[   26.829192]  domain 0: span 01
[   26.829195]   groups: 01
[   26.829645] net_namespace: 64 bytes
[   26.829664] Booting paravirtualized kernel on bare hardware
[   26.830426] Time:  7:53:12  Date: 10/19/08
[   26.830500] NET: Registered protocol family 16
[   26.830963] EISA bus registered
[   26.831009] ACPI: bus type pci registered
[   26.833450] PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=2
[   26.833458] PCI: Using configuration type 1
[   26.833475] Setting up standard PCI resources
[   26.836736] ACPI: EC: Look up EC in DSDT
[   26.841374] ACPI: Interpreter enabled
[   26.841387] ACPI: (supports S0 S1 S4 S5)
[   26.841411] ACPI: Using IOAPIC for interrupt routing
[   26.850323] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   26.850620] Enabling SiS 96x SMBus.
[   26.851356] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   26.866283] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 
14 15)
[   26.866442] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 
14 15) *0, disabled.
[   26.866591] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 
14 15)
[   26.866743] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 
14 15)
[   26.866891] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 
14 15)
[   26.867044] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 
14 15)
[   26.867191] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 
14 15) *0, disabled.
[   26.867334] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 *12 
14 15)
[   26.867663] ACPI: Power Resource [URP1] (off)
[   26.867714] ACPI: Power Resource [URP2] (off)
[   26.867760] ACPI: Power Resource [FDDP] (off)
[   26.867805] ACPI: Power Resource [LPTP] (off)
[   26.867962] Linux Plug and Play Support v0.97 (c) Adam Belay
[   26.868036] pnp: PnP ACPI init
[   26.868059] ACPI: bus type pnp registered
[   26.873157] pnp: PnP ACPI: found 11 devices
[   26.873168] ACPI: ACPI bus type pnp unregistered
[   26.873176] PnPBIOS: Disabled by ACPI PNP
[   26.873741] PCI: Using ACPI for IRQ routing
[   26.873751] PCI: If a device doesn't work, try "pci=routeirq".  If it 
helps, post a report
[   26.889005] NET: Registered protocol family 8
[   26.889012] NET: Registered protocol family 20
[   26.889240] AppArmor: AppArmor Filesystem Enabled
[   26.892960] Time: tsc clocksource has been installed.
[   26.901087] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[   26.901092] system 00:01: ioport range 0x295-0x296 has been reserved
[   26.901097] system 00:01: ioport range 0x800-0x87f has been reserved
[   26.901101] system 00:01: ioport range 0x880-0x8ff has been reserved
[   26.901105] system 00:01: ioport range 0xc00-0xc1f has been reserved
[   26.901114] system 00:01: iomem range 0xfee00000-0xfee00fff could not 
be reserved
[   26.931952] PCI: Bridge: 0000:00:01.0
[   26.931962]   IO window: b000-bfff
[   26.931972]   MEM window: cfd00000-cfefffff
[   26.931977]   PREFETCH window: bfa00000-cfbfffff
[   26.932032] NET: Registered protocol family 2
[   26.969050] IP route cache hash table entries: 32768 (order: 5, 
131072 bytes)
[   26.969795] TCP established hash table entries: 131072 (order: 8, 
1048576 bytes)
[   26.973285] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   26.974964] TCP: Hash tables configured (established 131072 bind 65536)
[   26.974972] TCP reno registered
[   26.985152] checking if image is initramfs... it is
[   27.432393] Switched to high resolution mode on CPU 0
[   27.925985] Freeing initrd memory: 7312k freed
[   27.927288] audit: initializing netlink socket (disabled)
[   27.927324] audit(1224402792.752:1): initialized
[   27.927647] highmem bounce pool size: 64 pages
[   27.931068] VFS: Disk quotas dquot_6.5.1
[   27.931244] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   27.931603] io scheduler noop registered
[   27.931611] io scheduler anticipatory registered
[   27.931614] io scheduler deadline registered
[   27.931644] io scheduler cfq registered (default)
[   27.931761] Boot video device is 0000:01:00.0
[   27.932374] isapnp: Scanning for PnP cards...
[   28.285855] isapnp: No Plug & Play device found
[   28.409639] Real Time Clock Driver v1.12ac
[   28.409824] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ 
sharing enabled
[   28.410051] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   28.412078] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   28.413698] RAMDISK driver initialized: 16 RAM disks of 65536K size 
1024 blocksize
[   28.413856] input: Macintosh mouse button emulation as 
/devices/virtual/input/input0
[   28.414063] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[   28.414068] PNP: PS/2 appears to have AUX port disabled, if this is 
incorrect please boot with i8042.nopnp
[   28.414258] serio: i8042 KBD port at 0x60,0x64 irq 1
[   28.423388] mice: PS/2 mouse device common for all mice
[   28.423645] EISA: Probing bus 0 at eisa.0
[   28.423693] EISA: Detected 0 cards.
[   28.423699] cpuidle: using governor ladder
[   28.423703] cpuidle: using governor menu
[   28.424021] NET: Registered protocol family 1
[   28.424088] Using IPI No-Shortcut mode
[   28.424160] registered taskstats version 1
[   28.424325]   Magic number: 12:531:875
[   28.424687] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   28.424691] EDD information not available.
[   28.425657] Freeing unused kernel memory: 368k freed
[   28.448666] input: AT Translated Set 2 keyboard as 
/devices/platform/i8042/serio0/input/input1
[   29.967456] fuse init (API version 7.9)
[   31.224109] SCSI subsystem initializedubuntu-fr at lists.ubuntu.com
[   31.337156] usbcore: registered new interface driver usbfs
[   31.337205] usbcore: registered new interface driver hub
[   31.359903] libata version 3.00 loaded.
[   31.363948] usbcore: registered new device driver usb
[   31.379506] sis900.c: v1.08.10 Apr. 2 2006
[   31.379665] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, 
low) -> IRQ 16
[   31.380894] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at 
address 1.
[   31.393133] 0000:00:04.0: Using transceiver found at address 1 as default
[   31.399077] eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 16, 
00:19:66:5d:2b:fd
[   31.411508] pata_sis 0000:00:02.5: version 0.5.2
[   31.427487] scsi0 : pata_sis
[   31.442937] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller 
(OHCI) Driver
[   31.465306] scsi1 : pata_sis
[   31.466248] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 
irq 14
[   31.466255] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 
irq 15ubuntu-fr at lists.ubuntu.com
[   31.527398] Floppy drive(s): fd0 is 1.44M
[   31.547034] FDC 0 is a post-1991 82077
[   31.665750] ata1.00: ATA-7: MAXTOR STM380215A, 3.AAD, max UDMA/100
[   31.665760] ata1.00: 156301488 sectors, multi 16: LBA48
[   31.732264] ata1.00: configured for UDMA/100
[   32.206701] ata2.00: ATAPI: TSSTcorpCD/DVDW SH-S182M, SB04, max UDMA/33
[   32.206735] ata2.01: ATAPI: ASUS    CD-S520/A4, 1.21, max UDMA/33
[   32.378538] ata2.00: configured for UDMA/33
[   32.542399] ata2.01: configured for UDMA/33
[   32.542679] scsi 0:0:0:0: Direct-Access     ATA      MAXTOR STM380215 
3.AA PQ: 0 ANSI: 5
[   32.546636] scsi 1:0:0:0: CD-ROM            TSSTcorp CD/DVDW SH-S182M 
SB04 PQ: 0 ANSI: 5
[   32.547129] scsi 1:0:1:0: CD-ROM            ASUS     CD-S520/A4       
1.21 PQ: 0 ANSI: 5
[   32.551995] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, 
low) -> IRQ 17
[   32.552023] ohci_hcd 0000:00:03.0: OHCI Host Controller
[   32.552867] ohci_hcd 0000:00:03.0: new USB bus registered, assigned 
bus number 1
[   32.552909] ohci_hcd 0000:00:03.0: irq 17, io mem 0xcfff9000
[   32.608167] usb usb1: configuration #1 chosen from 1 choice
[   32.608217] hub 1-0:1.0: USB hub foundubuntu-fr at lists.ubuntu.com
[   32.608234] hub 1-0:1.0: 3 ports detected
[   32.710005] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, 
low) -> IRQ 18
[   32.710039] ohci_hcd 0000:00:03.1: OHCI Host Controller
[   32.710089] ohci_hcd 0000:00:03.1: new USB bus registered, assigned 
bus number 2
[   32.710122] ohci_hcd 0000:00:03.1: irq 18, io mem 0xcfffa000
[   32.767959] usb usb2: configuration #1 chosen from 1 choice
[   32.768009] hub 2-0:1.0: USB hub found
[   32.768025] hub 2-0:1.0: 3 ports detected
[   32.870108] ACPI: PCI Interrupt 0000:00:03.2[D] -> GSI 23 (level, 
low) -> IRQ 19
[   32.870144] ehci_hcd 0000:00:03.2: EHCI Host Controller
[   32.870225] ehci_hcd 0000:00:03.2: new USB bus registered, assigned 
bus number 3
[   32.870293] PCI: cache line size of 64 is not supported by device 
0000:00:03.2
[   32.870314] ehci_hcd 0000:00:03.2: irq 19, io mem 0xcfffb000
[   33.013421] usb 1-2: new low speed USB device using ohci_hcd and 
address 2
[   33.025519] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 
10 Dec 2004
[   33.025781] usb usb3: configuration #1 chosen from 1 choice
[   33.025828] hub 3-0:1.0: USB hub found
[   33.025843] hub 3-0:1.0: 6 ports detectedubuntu-fr at lists.ubuntu.com
[   33.165361] Driver 'sd' needs updating - please use bus_type methods
[   33.165589] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors 
(80026 MB)
[   33.165615] sd 0:0:0:0: [sda] Write Protect is off
[   33.165620] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   33.165650] sd 0:0:0:0: [sda] Write cache: enabled, read cache: 
enabled, doesn't support DPO or FUA
[   33.165745] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors 
(80026 MB)
[   33.165761] sd 0:0:0:0: [sda] Write Protect is off
[   33.165765] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   33.165788] sd 0:0:0:0: [sda] Write cache: enabled, read cache: 
enabled, doesn't support DPO or FUA
[   33.165798]  sda:<4>Driver 'sr' needs updating - please use bus_type 
methods
[   33.185387]  sda1 sda2 < sda5 sda6 sda7 sda8 >
[   33.227095] sd 0:0:0:0: [sda] Attached SCSI disk
[   33.240167] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   33.240207] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   33.240236] scsi 1:0:1:0: Attached scsi generic sg2 type 5
[   33.240488] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw 
xa/form2 cdda tray
[   33.240497] Uniform CD-ROM driver Revision: 3.20
[   33.240581] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   33.242222] sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[   33.242365] sr 1:0:1:0: Attached scsi CD-ROM sr1
[   33.697010] usb 1-2: new low speed USB device using ohci_hcd and 
address 3
[   33.910456] usb 1-2: configuration #1 chosen from 1 choice
[   33.952809] usbcore: registered new interface driver hiddev
[   33.958702] input: Microsoft Microsoft 5-Button Mouse with 
IntelliEye(TM) as 
/devices/pci0000:00/0000:00:03.0/usb1/1-2/1-2:1.0/input/input2
[   33.972299] input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 
5-Button Mouse with IntelliEye(TM)] on usb-0000:00:03.0-2
[   33.972342] usbcore: registered new interface driver usbhid
[   33.972350] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: 
v2.6:USB HID core driver
[   33.996298] Attempting manual resume
[   33.996306] swsusp: Resume From Partition 8:8
[   33.996309] PM: Checking swsusp image.
[   34.008804] PM: Resume from disk failed.
[   34.068618] kjournald starting.  Commit interval 5 seconds
[   34.068654] EXT3-fs: mounted filesystem with ordered data mode.
[   43.786260] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   43.854393] Linux agpgart interface v0.102
[   43.944077] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   44.186360] agpgart: Detected SiS chipset - id:1857
[   44.194549] agpgart: AGP aperture is 64M @ 0xd0000000
[   44.443305] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
[   44.996321] input: PC Speaker as /devices/platform/pcspkr/input/input3
[   45.147860] input: Power Button (FF) as /devices/virtual/input/input4
[   45.162332] ACPI: Power Button (FF) [PWRF]
[   45.162647] input: Power Button (CM) as /devices/virtual/input/input5
[   45.178221] ACPI: Power Button (CM) [PWRB]
[   48.025552] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, 
low) -> IRQ 20
[   48.346255] intel8x0_measure_ac97_clock: measured 55483 usecs
[   48.346266] intel8x0: clocking to 48000
[   48.611163] parport_pc 00:09: reported by Plug and Play ACPI
[   48.611286] parport0: PC-style at 0x378 (0x778), irq 7, dma 0 
[PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   52.279605] loop: module loaded
[   52.330768] lp0: using parport0 (interrupt-driven).
[   52.490209] Adding 979924k swap on /dev/sda8.  Priority:-1 extents:1 
across:979924k
[   53.117841] EXT3 FS on sda7, internal journal
[   54.800682] ip_tables: (C) 2000-2006 Netfilter Core Team
[   55.728624] No dock devices found.
[   57.630185] apm: BIOS not found.
[   57.805910] ppdev: user-space parallel port driver
[   58.032360] audit(1224402823.910:2): type=1503 
operation="inode_permission" 
requbuntu-fr at lists.ubuntu.comuested_mask="a::" denied_mask="a::" 
name="/dev/tty" pid=4732 profile="/usr/sbin/cupsd" namespace="default"
[   63.585762] Bluetooth: Core ver 2.11
[   63.587428] NET: Registered protocol family 31
[   63.587438] Bluetooth: HCI device and connection manager initialized
[   63.587445] Bluetooth: HCI socket layer initialized
[   63.632261] Bluetooth: L2CAP ver 2.9
[   63.632274] Bluetooth: L2CAP socket layer initialized
[   63.778314] Bluetooth: RFCOMM socket layer initialized
[   63.778360] Bluetooth: RFCOMM TTY layer initialized
[   63.778364] Bluetooth: RFCOMM ver 1.8
[   65.386177] eth0: Media Link On 100mbps full-duplex
[   65.808562] NET: Registered protocol family 17
[   69.902518] NET: Registered protocol family 10
[   69.903744] lo: Disabled Privacy Extensionsubuntu-fr at lists.ubuntu.com
[   80.010802] eth0: no IPv6 routers present
[  108.057100] cdrom: sr0: mrw address space DMA selected
[  108.419086] cdrom: sr0: mrw address space DMA selected
[  109.391412] UDF-fs: No VRS found
[  109.503666] ISO 9660 Extensions: Microsoft Joliet Level 3
[  109.504419] UDF-fs: Partition marked readonly; forcing readonly mount
[  109.531590] ISOFS: changing to secondary root
[  109.561226] UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 
'CHIKEN_RUN', timestamp 2001/05/15 19:09 (1078)
[ 6210.825500] UDF-fs: No VRS found
[ 6210.878094] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 6210.914498] ISOFS: changing to secondary root
[ 6212.606173] end_request: I/O error, dev sr0, sector 0
[ 6212.606193] Buffer I/O error on device sr0, logical block 0
[ 6212.606209] Buffer I/O error on device sr0, logical block 1
[ 6212.606214] Buffer I/O error on device sr0, logical block 2
[ 6212.606219] Buffer I/O error on device sr0, logical block 3
[ 6212.608954] end_request: I/O error, dev sr0, sector 0
[ 6212.608974] Buffer I/O error on device sr0, logical block 0
[ 6212.611226] end_request: I/O error, dev sr0, sector 0
[ 6212.611246] Buffer I/O error on device sr0, logical block 0
[ 6212.807746] end_request: I/O error, dev sr0, sector 0
[ 6212.807766] Buffer I/O error on device sr0, logical block 0
[ 6212.811197] end_request: I/O error, dev sr0, sector 0
[ 6212.811218] Buffer I/O error on device sr0, logical block 0
titi at 81rikiki:~$


titi at 81rikiki:~$ lsusb
Bus 003 Device 001: ID 0000:0000 
Bus 002 Device 001: ID 0000:0000 
Bus 001 Device 003: ID 045e:0047 Microsoft Corp. IntelliMouse Explorer 3.0
Bus 001 Device 001: ID 0000:0000 
titi at 81rikiki:~$

j'ai trouvé la page ci-dessous qui ne m'aide pas beaucoup :
http://www.commentcamarche.net/forum/affich-3842308-encodage-films-pour-mpman-ct18

Est-ce que les renseignement $ dmesg et $ lsusb sont encourageants ?

Thierry





Plus d'informations sur la liste de diffusion ubuntu-fr