reseau en panne?
J Bond 0.07
jojonuxdelux at gmail.com
Sam 23 Fév 08:49:56 UTC 2008
c.kumsta wrote:
> Perso, pour entrer des IP en fixe, je le fais directement dans le fichier "/etc/network/interfaces"
> Par exemple, dans ton cas :
> ========================================
> auto lo
> iface lo inet loopback
>
> auto eth0
> iface eth0 inet static
> address 192.168.0.4
> netmask 255.255.255.0
>
> auto eth2
> iface eth1 inet static
> address 192.168.88.1
> netmask 255.255.255.0
> ========================================
Mon fichier interfaces :
This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo eth2
iface lo inet loopback
# This is a list of hotpluggable network interfaces.
# They will be activated automatically by the hotplug subsystem.
mapping hotplug
script grep
map eth2
# The primary network interface
iface eth2 inet static
address 192.168.88.1
netmask 255.255.255.0
gateway 192.168.1.4
auto dsl-provider
iface dsl-provider inet ppp
pre-up /sbin/ifconfig eth2 up # line maintained by pppoeconf
provider dsl-provider
auto eth0:avah
iface eth0:avah inet manual
#auto eth1
#auto eth0
#auto eth2
#auto eth2
iface eth1 inet static
address 192.168.1.4
netmask 255.255.255.0
gateway 192.168.1.1
auto eth1
iface eth0 inet static
address 192.168.1.4
netmask 255.255.255.0
gateway 192.168.0.50
auto eth0
>
> (à mon avis, ce n'est pas la peine de rajouter de champs "gateway" étant donné que c'est ta connexion vers ton FAI
> qui va le régler au moment de la négociation avec ton FAI sur ppp0)
>
> ++dune2
>
> Jmb at moustique:~$ sudo ifconfig
eth0 Lien encap:Ethernet HWaddr 00:13:8F:7A:C6:DD
inet adr:192.168.1.4 Bcast:192.168.1.255 Masque:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 b) Octets transmis:0 (0.0 b)
Interruption:16 Adresse de base:0xc000
eth1 Lien encap:Ethernet HWaddr 00:18:E7:07:F9:F4
inet adr:192.168.1.4 Bcast:192.168.1.255 Masque:255.255.255.0
adr inet6: fe80::218:e7ff:fe07:f9f4/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:45 erreurs:0 :0 overruns:0 frame:0
TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:11692 (11.4 KB) Octets transmis:528 (528.0 b)
Interruption:19 Adresse de base:0x2800
eth2 Lien encap:Ethernet HWaddr 00:10:A7:0C:8B:55
inet adr:192.168.88.1 Bcast:192.168.88.255 Masque:255.255.255.0
adr inet6: fe80::210:a7ff:fe0c:8b55/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:4653 erreurs:0 :0 overruns:0 frame:0
TX packets:4201 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:3285428 (3.1 MB) Octets transmis:465510 (454.5 KB)
Interruption:20 Adresse de base:0xec00
lo Lien encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:408 erreurs:0 :0 overruns:0 frame:0
TX packets:408 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:33437 (32.6 KB) Octets transmis:33437 (32.6 KB)
ppp0 Lien encap:Protocole Point-à-Point
inet adr:194.206.79.171 P-t-P:195.146.243.10
Masque:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1
Packets reçus:4345 erreurs:0 :0 overruns:0 frame:0
TX packets:3825 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:3
Octets reçus:3171290 (3.0 MB) Octets transmis:357454 (349.0 KB)
mb at moustique:~$
ufconfig est bon, maintenant!
mb at moustique:~$ sudo route
Table de routage IP du noyau
Destination Passerelle Genmask Indic Metric Ref Use
Iface
lns2.l0.10.143. * 255.255.255.255 UH 0 0 0 ppp0
192.168.1.0 * 255.255.255.0 U 0 0 0 eth0
192.168.1.0 * 255.255.255.0 U 0 0 0 eth1
192.168.88.0 * 255.255.255.0 U 0 0 0 eth2
link-local * 255.255.0.0 U 1000 0 0 eth1
default * 0.0.0.0 U 0 0 0 ppp0
mb at moustique:~$
ça devrait marcher et ça marche pas : les ping sont perdus.
Je regarde maintenant du coté des hosts et hosts.allow! :
hosts:
127.0.0.1 localhost
#
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts
192.168.88.3 violette
192.168.1.1 modem
192.168.0.50 dlink
192.168.88.5 lombric
192.168.1.4 crapaud.chikungugna.org
hosts.allow :
/etc/hosts.allow: list of hosts that are allowed to access the system.
# See the manual pages hosts_access(5) and
hosts_options(5).
#
# Example: ALL: LOCAL @some_netgroup
# ALL: .foobar.edu EXCEPT terminalserver.foobar.edu
#
# If you're going to protect the portmapper use the name "portmap" for the
# daemon name. Remember that you can only use the keyword "ALL" and IP
# addresses (NOT host or domain names) for the portmapper, as well as for
# rpc.mountd (the NFS mount daemon). See portmap(8) and rpc.mountd(8)
# for further information.
#
192.168.88.3 violette
192.168.88.5 lombric
192.168.1.1 modem
192.168.0.50 dlink
ALL: LOCAL @chikungugna.org
192.168.1.4 crapaud.chikungugna.org
Où est l'erreur? : ça devient compliqué, et le tuto n'est peut etre pas
trop clair..
Plus d'informations sur la liste de diffusion ubuntu-fr