installer modem adsl

François de Reilhan paco.f at laposte.net
Mar 20 Mar 19:44:41 UTC 2007


Salut,
          après avoir installé les paquets necessaires, j'ai suivi le 
tutoriel et le pilote semble installé. Pourtant la commande 
"eagleconfig" ne fonctionne pas.
Peut-être qu'il faut paramétrer ppp avant ?
je nage...
Si quelqu'un a la patience de lire ma prose...
merci d'avance!
François

eagle-usb-2.0.0/driver/COPYING
eagle-usb-2.0.0/driver/Cmv.h
eagle-usb-2.0.0/driver/Dsp.c
eagle-usb-2.0.0/driver/Dsp.h
eagle-usb-2.0.0/driver/Makefile
eagle-usb-2.0.0/driver/Makefile-2.4
eagle-usb-2.0.0/driver/Makefile-2.6
eagle-usb-2.0.0/driver/Makefile-module_disabled
eagle-usb-2.0.0/driver/Me.c
eagle-usb-2.0.0/driver/Me.h
eagle-usb-2.0.0/driver/Mpoa.c
eagle-usb-2.0.0/driver/Mpoa.h
eagle-usb-2.0.0/driver/Oam.c
eagle-usb-2.0.0/driver/Oam.h
eagle-usb-2.0.0/driver/Pipes.c
eagle-usb-2.0.0/driver/Pipes.h
eagle-usb-2.0.0/driver/Sar.c
eagle-usb-2.0.0/driver/Sar.h
eagle-usb-2.0.0/driver/Sm.c
eagle-usb-2.0.0/driver/Uni.c
eagle-usb-2.0.0/driver/Uni.h
eagle-usb-2.0.0/driver/debug.h
eagle-usb-2.0.0/driver/eagle-usb.h
eagle-usb-2.0.0/driver/eu_boot_sm.c
eagle-usb-2.0.0/driver/eu_boot_sm.h
eagle-usb-2.0.0/driver/eu_eth.c
eagle-usb-2.0.0/driver/eu_eth.h
eagle-usb-2.0.0/driver/eu_firmware.h
eagle-usb-2.0.0/driver/eu_main.c
eagle-usb-2.0.0/driver/eu_msg.c
eagle-usb-2.0.0/driver/eu_msg.h
eagle-usb-2.0.0/driver/eu_sm.h
eagle-usb-2.0.0/driver/eu_types.h
eagle-usb-2.0.0/driver/eu_utils.c
eagle-usb-2.0.0/driver/eu_utils.h
eagle-usb-2.0.0/driver/macros.h
eagle-usb-2.0.0/driver/user/
eagle-usb-2.0.0/driver/user/CMVei.txt
eagle-usb-2.0.0/driver/user/CMVeiWO.txt
eagle-usb-2.0.0/driver/user/CMVep.txt
eagle-usb-2.0.0/driver/user/CMVepES.txt
eagle-usb-2.0.0/driver/user/CMVepFR.txt
eagle-usb-2.0.0/driver/user/CMVepIT.txt
eagle-usb-2.0.0/driver/user/CMVepWO.txt
eagle-usb-2.0.0/driver/user/Makefile
eagle-usb-2.0.0/driver/user/eagle-usb.conf
eagle-usb-2.0.0/driver/user/eaglectrl.c
eagle-usb-2.0.0/driver/user/eaglestat
eagle-usb-2.0.0/driver/user/usrisdn.conf
eagle-usb-2.0.0/driver/user/usrpots.conf
eagle-usb-2.0.0/pppoa/
eagle-usb-2.0.0/pppoa/Makefile
eagle-usb-2.0.0/pppoa/COPYING
eagle-usb-2.0.0/pppoa/common.c
eagle-usb-2.0.0/pppoa/config.h
eagle-usb-2.0.0/pppoa/debug.c
eagle-usb-2.0.0/pppoa/if.c
eagle-usb-2.0.0/pppoa/ppp.c
eagle-usb-2.0.0/pppoa/pppoa.c
eagle-usb-2.0.0/pppoa/pppoa.h
eagle-usb-2.0.0/utils/
eagle-usb-2.0.0/utils/eagleconnect/
eagle-usb-2.0.0/utils/eagleconnect/images/
eagle-usb-2.0.0/utils/eagleconnect/images/fichierssysteme.ppm
eagle-usb-2.0.0/utils/eagleconnect/images/fonts.ppm
eagle-usb-2.0.0/utils/eagleconnect/Makefile
eagle-usb-2.0.0/utils/eagleconnect/diagnostic.tcl
eagle-usb-2.0.0/utils/eagleconnect/eagleconnect.conf
eagle-usb-2.0.0/utils/eagleconnect/eagleconnect.tcl
eagle-usb-2.0.0/utils/eagleconnect/parameagleconnect.tcl
eagle-usb-2.0.0/utils/eagleconnect/reseau.tcl
eagle-usb-2.0.0/utils/eagleconnect/lang/
eagle-usb-2.0.0/utils/eagleconnect/lang/doc_fr.txt
eagle-usb-2.0.0/utils/eagleconnect/lang/fr.msg
eagle-usb-2.0.0/utils/scripts/
eagle-usb-2.0.0/utils/scripts/lang/
eagle-usb-2.0.0/utils/scripts/lang/br
eagle-usb-2.0.0/utils/scripts/lang/de
eagle-usb-2.0.0/utils/scripts/lang/en
eagle-usb-2.0.0/utils/scripts/lang/es
eagle-usb-2.0.0/utils/scripts/lang/f2
eagle-usb-2.0.0/utils/scripts/lang/fr
eagle-usb-2.0.0/utils/scripts/lang/it
eagle-usb-2.0.0/utils/scripts/lang/mk
eagle-usb-2.0.0/utils/scripts/lang/p2
eagle-usb-2.0.0/utils/scripts/lang/pl
eagle-usb-2.0.0/utils/scripts/Makefile
eagle-usb-2.0.0/utils/scripts/eagleconfig
eagle-usb-2.0.0/utils/scripts/eaglediag
eagle-usb-2.0.0/utils/scripts/eu_config_bash
eagle-usb-2.0.0/utils/scripts/eu_dsp
eagle-usb-2.0.0/utils/scripts/eu_init
eagle-usb-2.0.0/utils/scripts/fctStartAdsl
eagle-usb-2.0.0/utils/scripts/fctStopAdsl
eagle-usb-2.0.0/utils/scripts/net_cnx_down
eagle-usb-2.0.0/utils/scripts/net_cnx_pg
eagle-usb-2.0.0/utils/scripts/net_cnx_up
eagle-usb-2.0.0/utils/scripts/options
eagle-usb-2.0.0/utils/scripts/setvars
eagle-usb-2.0.0/utils/scripts/startadsl
eagle-usb-2.0.0/utils/scripts/stopadsl
eagle-usb-2.0.0/utils/scripts/testconnec
eagle-usb-2.0.0/utils/scripts/uninstOld
eagle-usb-2.0.0/utils/scripts/usb.usermap
eagle-usb-2.0.0/aclocal.m4
eagle-usb-2.0.0/configure
francois at ubuntu:/tmp$ cd eagle-usb-2.0.0/
francois at ubuntu:/tmp/eagle-usb-2.0.0$ ./configure
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for a BSD-compatible install... /usr/bin/install -c
checking whether ln -s works... yes
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking how to run the C preprocessor... gcc -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking netinet/in.h usability... yes
checking netinet/in.h presence... yes
checking for netinet/in.h... yes
checking for stdint.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking syslog.h usability... yes
checking syslog.h presence... yes
checking for syslog.h... yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for off_t... yes
checking for size_t... yes
checking whether time.h and sys/time.h may both be included... yes
checking whether struct tm is in sys/time.h or time.h... time.h
checking for working volatile... yes
checking whether closedir returns void... no
checking whether gcc needs -traditional... no
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking for working memcmp... yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible realloc... yes
checking sys/select.h usability... yes
checking sys/select.h presence... yes
checking for sys/select.h... yes
checking for sys/socket.h... (cached) yes
checking types of arguments for select... int,fd_set *,struct timeval *
checking return type of signal handlers... void
checking whether lstat dereferences a symlink specified with a trailing 
slash...  yes
checking whether stat accepts an empty string... no
checking for strftime... yes
checking for alarm... yes
checking for gettimeofday... yes
checking for memset... yes
checking for select... yes
checking for socket... yes
checking for strcspn... yes
checking for strdup... yes
checking for strerror... yes
checking for strncasecmp... yes
checking for strspn... yes
checking for strtol... yes
checking for ifconfig... yes
checking for route... yes
checking for pidof... yes
checking for dhclient... dhclient
checking for pppd... yes
checking for pppoe... no
checking for tclsh... yes
checking for wish... yes
checking for doc/man/eagleconfig.8... yes
checking for xsltproc... yes
   *** docbook stylesheets are missing, keeping prebuild version ***
checking for kernel version... 2.6.12-10-386
checking for ifup... 1
checking for adictrl... no
checking for eaglectrl... no
checking for showstat... no
checking for eaglestat... no
checking for startadsl... no
checking for stopadsl... no
configure: creating ./config.status
config.status: creating Makefile.common

========================================================================
distribution detected                           Debian

dhcp support                                    dhclient

pppd support                                    yes
  pppoa support                                 yes
  pppoe support                                 no  (runtime detection)

install eagleconnect (tcl/tk frontend)          yes

generate documentation                          no
========================================================================

note: current gcc should be the same version as the one used to compile 
kernel.

francois at ubuntu:/tmp/eagle-usb-2.0.0$ make clean
make -C driver clean && \
make -C pppoa clean && \
make -C utils/eagleconnect clean && \
make -C utils/scripts clean
make[1]: entrant dans le répertoire « /tmp/eagle-usb-2.0.0/driver »
make -C ./user clean
make[2]: entrant dans le répertoire « /tmp/eagle-usb-2.0.0/driver/user »
rm -f eaglectrl
make[2]: quittant le répertoire « /tmp/eagle-usb-2.0.0/driver/user »
make -C ./firmware clean
make[2]: entrant dans le répertoire « /tmp/eagle-usb-2.0.0/driver/firmware »
rm -f buildDSP dsp_code_isdn.bin dsp_code_pots.bin
make[2]: quittant le répertoire « /tmp/eagle-usb-2.0.0/driver/firmware »
make[1]: quittant le répertoire « /tmp/eagle-usb-2.0.0/driver »
make[1]: entrant dans le répertoire « /tmp/eagle-usb-2.0.0/pppoa »
rm -f *.o pppoa
make[1]: quittant le répertoire « /tmp/eagle-usb-2.0.0/pppoa »
make[1]: entrant dans le répertoire « 
/tmp/eagle-usb-2.0.0/utils/eagleconnect »
rm -Rf tmp
make[1]: quittant le répertoire « /tmp/eagle-usb-2.0.0/utils/eagleconnect »
make[1]: entrant dans le répertoire « /tmp/eagle-usb-2.0.0/utils/scripts »
rm -Rf tmp
make[1]: quittant le répertoire « /tmp/eagle-usb-2.0.0/utils/scripts »
#make -C doc clean
francois at ubuntu:/tmp/eagle-usb-2.0.0$ make
make -C driver && \
make -C pppoa && \
make -C utils/scripts && \
make -C utils/eagleconnect && \
make -C doc
make[1]: entrant dans le répertoire « /tmp/eagle-usb-2.0.0/driver »
USE_CMVS=0 make  -C /lib/modules/2.6.12-10-386/build 
SUBDIRS=/tmp/eagle-usb-2.0. 0/driver modules
make[2]: entrant dans le répertoire « /usr/src/linux-headers-2.6.12-10-386 »
  CC [M]  /tmp/eagle-usb-2.0.0/driver/eu_main.o
  CC [M]  /tmp/eagle-usb-2.0.0/driver/eu_utils.o
  CC [M]  /tmp/eagle-usb-2.0.0/driver/Pipes.o
  CC [M]  /tmp/eagle-usb-2.0.0/driver/Me.o
  CC [M]  /tmp/eagle-usb-2.0.0/driver/Sm.o
  CC [M]  /tmp/eagle-usb-2.0.0/driver/eu_msg.o
  CC [M]  /tmp/eagle-usb-2.0.0/driver/Dsp.o
  CC [M]  /tmp/eagle-usb-2.0.0/driver/Mpoa.o
  CC [M]  /tmp/eagle-usb-2.0.0/driver/Uni.o
  CC [M]  /tmp/eagle-usb-2.0.0/driver/Sar.o
  CC [M]  /tmp/eagle-usb-2.0.0/driver/Oam.o
  CC [M]  /tmp/eagle-usb-2.0.0/driver/eu_eth.o
  CC [M]  /tmp/eagle-usb-2.0.0/driver/eu_boot_sm.o
  LD [M]  /tmp/eagle-usb-2.0.0/driver/eagle-usb.o
  Building modules, stage 2.
  MODPOST
  CC      /tmp/eagle-usb-2.0.0/driver/eagle-usb.mod.o
  LD [M]  /tmp/eagle-usb-2.0.0/driver/eagle-usb.ko
make[2]: quittant le répertoire « /usr/src/linux-headers-2.6.12-10-386 »
make -C ./firmware
make[2]: entrant dans le répertoire « /tmp/eagle-usb-2.0.0/driver/firmware »
gcc -O2 -pipe -Wall -pedantic builddsp.c -o buildDSP
./buildDSP -d sagem/pots dsp_code_pots.bin
Reading file sagem/pots/rtbldep0.bnm
Reading file sagem/pots/rtbldep1.bnm
Reading file sagem/pots/rtbldep2.bnm
Reading file sagem/pots/rtbldep3.bnm
Reading file sagem/pots/rtbldep4.bnm
Writing file dsp_code_pots.bin
./buildDSP -d sagem/isdn dsp_code_isdn.bin
Reading file sagem/isdn/rtbldei0.bnm
Reading file sagem/isdn/rtbldei1.bnm
Reading file sagem/isdn/rtbldei2.bnm
Reading file sagem/isdn/rtbldei3.bnm
Reading file sagem/isdn/rtbldei4.bnm
Writing file dsp_code_isdn.bin
make[2]: quittant le répertoire « /tmp/eagle-usb-2.0.0/driver/firmware »
make -C ./user
make[2]: entrant dans le répertoire « /tmp/eagle-usb-2.0.0/driver/user »
gcc -O2 -pipe -Wall -pedantic -DLINUX -g -DCONF_DIR="\"/etc/eagle-usb\"" 
-DBIN_D IR="\"/etc/eagle-usb/dsp\"" '-DEAGLEUSBVERSION="2.0.0"' 
eaglectrl.c -o eaglectrl
make[2]: quittant le répertoire « /tmp/eagle-usb-2.0.0/driver/user »
make[1]: quittant le répertoire « /tmp/eagle-usb-2.0.0/driver »
make[1]: entrant dans le répertoire « /tmp/eagle-usb-2.0.0/pppoa »
gcc -O2 -Wall -Wstrict-prototypes -ansi -pedantic   '-DVERSION="2.0.0"' 
-c -o pp poa.o pppoa.c
gcc -O2 -Wall -Wstrict-prototypes -ansi -pedantic   '-DVERSION="2.0.0"' 
-c -o if .o if.c
gcc -O2 -Wall -Wstrict-prototypes -ansi -pedantic   '-DVERSION="2.0.0"' 
-c -o de bug.o debug.c
gcc -O2 -Wall -Wstrict-prototypes -ansi -pedantic   '-DVERSION="2.0.0"' 
-c -o co mmon.o common.c
gcc -O2 -Wall -Wstrict-prototypes -ansi -pedantic   '-DVERSION="2.0.0"' 
-c -o pp p.o ppp.c
gcc -o pppoa pppoa.o if.o debug.o common.o ppp.o
make[1]: quittant le répertoire « /tmp/eagle-usb-2.0.0/pppoa »
make[1]: entrant dans le répertoire « /tmp/eagle-usb-2.0.0/utils/scripts »
rm -Rf tmp
mkdir -p tmp
cat setvars | sed \
        -e "s|@SBIN_DIR@|/usr/sbin|g" \
        -e "s|@EU_DIR@|/etc/eagle-usb|g" \
        -e "s|@EU_LANG_DIR@|/etc/eagle-usb/lang|g" \
        -e "s|@EU_SCRIPT_DIR@|/etc/eagle-usb/scripts|g" \
        -e "s|@USE_HOTPLUG@|1|g" \
        -e "s|@USE_IFUPDOWN@|0|g" \
        -e "s|@BOOT_METHOD@|update-rc.d|g" \
        -e "s|@DISTRIB@|Debian|g" \
        -e "s|@DISTVER@|0|g" \
        -e "s|@SIMPLE@|0|g" \
        -e "s|@INIT_DIR@|/etc/init.d|g" \
        -e "s|@PPP_DIR@|/etc/ppp|g" \
        -e "s|@HOTPLUG_SCRIPT_DIR@|/etc/hotplug/usb|g" \
        -e "s|@NET_SCRIPT_DIR@|/etc/sysconfig/network-scripts|g" \
        -e "s|@EU_LANG@|auto|g" \
        -e "s|@PPP_OPTIONS_DIR@|/etc/ppp/peers|g" \
        -e "s|@PPP_OPTIONS_ADSL@|/etc/ppp/peers/adsl|g" \
        -e "s|@PPP_OPTIONS_MIRE@|/etc/ppp/peers/mire|g" \
        -e "s|@SYSCONF_FILE@|/var/lock/eagle-usb|g" \
        > tmp/setvars && \
sed -e "s|exit 123|. /etc/eagle-usb/scripts/setvars|" -e "s| 1 == 1 | 0 
== 1 |" fctStopAdsl > tmp/fctStopAdsl && \
sed "s|exit 123|. /etc/eagle-usb/scripts/setvars|g" fctStartAdsl > 
tmp/fctStartA dsl && \
sed "s|exit 123|. /etc/eagle-usb/scripts/setvars|g" startadsl > 
tmp/startadsl &&  \
sed "s|exit 123|. /etc/eagle-usb/scripts/setvars|g" stopadsl > 
tmp/stopadsl && \
sed "s|exit 123|. /etc/eagle-usb/scripts/setvars|g" eagleconfig > 
tmp/eagleconfi g && \
sed "s|exit 123|. /etc/eagle-usb/scripts/setvars|g" eaglediag > 
tmp/eaglediag &&  \
sed "s|exit 123|. /etc/eagle-usb/scripts/setvars|g" eu_config_bash > 
tmp/eu_conf ig_bash && \
sed "s|exit 123|. /etc/eagle-usb/scripts/setvars|g" eu_dsp > tmp/eu_dsp && \
sed "s|exit 123|. /etc/eagle-usb/scripts/setvars|g" eu_init > 
tmp/eu_init && \
sed "s|exit 123|. /etc/eagle-usb/scripts/setvars|g" net_cnx_up > 
tmp/net_cnx_up && \
sed "s|exit 123|. /etc/eagle-usb/scripts/setvars|g" net_cnx_down > 
tmp/net_cnx_d own && \
sed "s|exit 123|. /etc/eagle-usb/scripts/setvars|g" testconnec > 
tmp/testconnec
#sed "s|exit 123|. /etc/eagle-usb/scripts/setvars|g" rc.eagle-usb > 
tmp/rc.eagle -usb && \

make[1]: quittant le répertoire « /tmp/eagle-usb-2.0.0/utils/scripts »
make[1]: entrant dans le répertoire « 
/tmp/eagle-usb-2.0.0/utils/eagleconnect »
rm -Rf tmp
if test 1 == 1 ; then \
        mkdir -p tmp ; \
        cat diagnostic.tcl | sed \
                -e "s|@SBIN_DIR@|/usr/sbin|g" \
                -e "s|@EU_EAGLECONNECT_DIR@|/etc/eagle-usb/eagleconnect|g" \
                > tmp/diagnostic.tcl ; \
        cat eagleconnect.tcl | sed \
                -e "s|@SBIN_DIR@|/usr/sbin|g" \
                -e "s|@EU_DIR@|/etc/eagle-usb|g" \
                -e "s|@EU_EAGLECONNECT_DIR@|/etc/eagle-usb/eagleconnect|g" \
                > tmp/eagleconnect.tcl ; \
        cat reseau.tcl | sed \
                -e "s|@SBIN_DIR@|/usr/sbin|g" \
                -e "s|@EU_EAGLECONNECT_DIR@|/etc/eagle-usb/eagleconnect|g" \
                > tmp/reseau.tcl ; \
fi
make[1]: quittant le répertoire « /tmp/eagle-usb-2.0.0/utils/eagleconnect »
make[1]: entrant dans le répertoire « /tmp/eagle-usb-2.0.0/doc »
make[1]: Rien à faire pour « all ».
make[1]: quittant le répertoire « /tmp/eagle-usb-2.0.0/doc »
francois at ubuntu:/tmp/eagle-usb-2.0.0$ make install
make -C driver install && \
make -C pppoa install && \
make -C utils/scripts install && \
make -C utils/eagleconnect install && \
make -C doc install && \
hash -r && \
echo -e 
"======================================================================= 
========" && \
echo -e "\n\nInstallation has finished!\nYou should now run eagleconfig 
to setup  your connexion.

eagleconfig: command not found

>  
>





Plus d'informations sur la liste de diffusion ubuntu-fr