Montage disque USB

[Sun Wukong]

Le 22.06.2007 10:32,, le perspicace Christophe Meessen s'exprimait en
ces termes:
[...]
> Voici ce que me renvoir dmesg | tail après branchement du disque sur USB.
> 
> [66062.172000] usb 5-1: USB disconnect, address 3
> [66082.580000] usb 5-1: new high speed USB device using ehci_hcd and
> address 4
> [66082.712000] usb 5-1: configuration #1 chosen from 1 choice
> [66082.712000] scsi4 : SCSI emulation for USB Mass Storage devices
> [66082.712000] usb-storage: device found at 4
> [66082.712000] usb-storage: waiting for device to settle before scanning
> [66087.712000] usb-storage: device scan complete
> [66087.712000] scsi 4:0:0:0:
> Direct-Access                                    PQ: 0 ANSI: 2 CCS
> [66087.720000] sd 4:0:0:0: Attached scsi disk sda
> [66087.720000] sd 4:0:0:0: Attached scsi generic sg0 type 0

Salut,
Pour référence (ça m'étonnerait qu'on y trouve la soluce) voici ce que
j'ai pour un disque USB 3 partitions (2×ext2 + 1 fat16) :
[   21.064852] usb-storage: device scan complete
[   21.100655] scsi 8:0:0:0: Direct-Access     WD       3200JB External
 0107 PQ: 0 ANSI: 0
[   21.111261] SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB)
[   21.112181] sdc: Write Protect is off
[   21.112183] sdc: Mode Sense: 03 00 00 00
[   21.112184] sdc: assuming drive cache: write through
[   21.116630] SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB)
[   21.117551] sdc: Write Protect is off
[   21.117553] sdc: Mode Sense: 03 00 00 00
[   21.117554] sdc: assuming drive cache: write through
[   21.117556]  sdc: sdc1 sdc2 sdc3
[   21.120699] sd 8:0:0:0: Attached scsi disk sdc
[   21.120724] sd 8:0:0:0: Attached scsi generic sg3 type 0

Le disque s'allume automatiquement à la mise sous tension sur port USB
(au démarrage donc). Il n'est donc dans ce cas, pas vraiment branché à
chaud. Tu peux pourquoi pas tester ce cas de figure.



-- 
SunWukong

Linux User #354048
GPG Key available : 0xF4DD0AD2 on keyserver.ubuntu.com